summaryrefslogtreecommitdiff
path: root/drivers/net/dm9000x.c
diff options
context:
space:
mode:
authorRemy Bohmer <linux@bohmer.net>2008-06-05 13:03:36 +0200
committerBen Warren <biggerbadderben@gmail.com>2008-06-05 23:47:28 -0700
commit0e38c938ed4bcadb4f4fc1419a541431e94fc202 (patch)
tree9f4bb909b9b43c08e9e73b31ead3473092384943 /drivers/net/dm9000x.c
parent6b52cfe16cd539935e32bd8cf19146522e462a4d (diff)
downloadu-boot-imx-0e38c938ed4bcadb4f4fc1419a541431e94fc202.zip
u-boot-imx-0e38c938ed4bcadb4f4fc1419a541431e94fc202.tar.gz
u-boot-imx-0e38c938ed4bcadb4f4fc1419a541431e94fc202.tar.bz2
DM9000 fix status check fail 0x6d error for trizeps board
According to the Application Notes of the DM9000, only the 2 bits 0:1 of the status byte need to be checked to identify a valid packet in the fifo But, The several different Application Notes do not all speak the same language on these bits. They do not disagree, but only 1 Application Note noted explicitly that only these 2 bits need to be checked. Even the datasheets do not mention anything about these 2 bits. Because the old code, and the kernel check the whole byte, I left this piece untouched. However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so it should work. Notice, that the 2nd iteration through this receive loop (when a 2nd packet is in the fifo) is much shorter now, compared to the older U-boot driver code, so that we can maybe run into a hardware condition now that was never seen before, or maybe was seen very unfrequently. Additionaly added a cleanup of a stack variable. Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Diffstat (limited to 'drivers/net/dm9000x.c')
-rw-r--r--drivers/net/dm9000x.c17
1 files changed, 8 insertions, 9 deletions
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 6f3ddf0..c2144d9 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -113,7 +113,7 @@ typedef struct board_info {
u8 device_wait_reset; /* device state */
u8 nic_type; /* NIC type */
unsigned char srom[128];
- void (*outblk)(void *data_ptr, int count);
+ void (*outblk)(volatile void *data_ptr, int count);
void (*inblk)(void *data_ptr, int count);
void (*rx_status)(u16 *RxStatus, u16 *RxLen);
} board_info_t;
@@ -161,14 +161,14 @@ dump_regs(void)
}
#endif
-static void dm9000_outblk_8bit(void *data_ptr, int count)
+static void dm9000_outblk_8bit(volatile void *data_ptr, int count)
{
int i;
for (i = 0; i < count; i++)
DM9000_outb((((u8 *) data_ptr)[i] & 0xff), DM9000_DATA);
}
-static void dm9000_outblk_16bit(void *data_ptr, int count)
+static void dm9000_outblk_16bit(volatile void *data_ptr, int count)
{
int i;
u32 tmplen = (count + 1) / 2;
@@ -176,7 +176,7 @@ static void dm9000_outblk_16bit(void *data_ptr, int count)
for (i = 0; i < tmplen; i++)
DM9000_outw(((u16 *) data_ptr)[i], DM9000_DATA);
}
-static void dm9000_outblk_32bit(void *data_ptr, int count)
+static void dm9000_outblk_32bit(volatile void *data_ptr, int count)
{
int i;
u32 tmplen = (count + 3) / 4;
@@ -551,7 +551,6 @@ eth_init(bd_t * bd)
int
eth_send(volatile void *packet, int length)
{
- char *data_ptr;
int tmo;
struct board_info *db = &dm9000_info;
@@ -560,11 +559,10 @@ eth_send(volatile void *packet, int length)
DM9000_iow(DM9000_ISR, IMR_PTM); /* Clear Tx bit in ISR */
/* Move data to DM9000 TX RAM */
- data_ptr = (char *) packet;
DM9000_outb(DM9000_MWCMD, DM9000_IO); /* Prepare for TX-data */
/* push the data to the TX-fifo */
- (db->outblk)(data_ptr, length);
+ (db->outblk)(packet, length);
/* Set TX length to DM9000 */
DM9000_iow(DM9000_TXPLL, length & 0xff);
@@ -625,8 +623,9 @@ eth_rx(void)
for (;;) {
DM9000_ior(DM9000_MRCMDX); /* Dummy read */
- /* Get most updated data */
- rxbyte = DM9000_inb(DM9000_DATA);
+ /* Get most updated data,
+ only look at bits 0:1, See application notes DM9000 */
+ rxbyte = DM9000_inb(DM9000_DATA) & 0x03;
/* Status check: this byte must be 0 or 1 */
if (rxbyte > DM9000_PKT_RDY) {