Merge branch 'master' of git://git.denx.de/u-boot-spi

5 files changed, 341 insertions, 135 deletions

diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c
index b3ef90f..3ec2151 100644
--- a/drivers/mtd/spi/spansion.c
+++ b/drivers/mtd/spi/spansion.c
@@ -101,7 +101,7 @@ static const struct spansion_spi_flash_params spansion_spi_flash_table[] = {
 		.idcode2 = 0x4d01,
 		.pages_per_sector = 256,
 		.nr_sectors = 256,
-		.name = "S25FL129P_64K/S25FL128S",
+		.name = "S25FL129P_64K/S25FL128S_64K",
 	},
 	{
 		.idcode1 = 0x0219,
@@ -110,6 +110,13 @@ static const struct spansion_spi_flash_params spansion_spi_flash_table[] = {
 		.nr_sectors = 512,
 		.name = "S25FL256S_64K",
 	},
+	{
+		.idcode1 = 0x0220,
+		.idcode2 = 0x4d01,
+		.pages_per_sector = 256,
+		.nr_sectors = 1024,
+		.name = "S25FL512S_64K",
+	},
 };
 
 struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 9991d47..6a6fe37 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -68,17 +68,60 @@ int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
 	return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len);
 }
 
-int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
-		size_t len, const void *buf)
+int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
 {
-	unsigned long page_addr, byte_addr, page_size;
-	size_t chunk_len, actual;
+	struct spi_slave *spi = flash->spi;
+	unsigned long timebase;
 	int ret;
-	u8 cmd[4];
+	u8 status;
+	u8 check_status = 0x0;
+	u8 poll_bit = STATUS_WIP;
+	u8 cmd = flash->poll_cmd;
 
-	page_size = flash->page_size;
-	page_addr = offset / page_size;
-	byte_addr = offset % page_size;
+	if (cmd == CMD_FLAG_STATUS) {
+		poll_bit = STATUS_PEC;
+		check_status = poll_bit;
+	}
+
+	ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
+	if (ret) {
+		debug("SF: fail to read %s status register\n",
+			cmd == CMD_READ_STATUS ? "read" : "flag");
+		return ret;
+	}
+
+	timebase = get_timer(0);
+	do {
+		WATCHDOG_RESET();
+
+		ret = spi_xfer(spi, 8, NULL, &status, 0);
+		if (ret)
+			return -1;
+
+		if ((status & poll_bit) == check_status)
+			break;
+
+	} while (get_timer(timebase) < timeout);
+
+	spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
+
+	if ((status & poll_bit) == check_status)
+		return 0;
+
+	/* Timed out */
+	debug("SF: time out!\n");
+	return -1;
+}
+
+int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
+		size_t cmd_len, const void *buf, size_t buf_len)
+{
+	struct spi_slave *spi = flash->spi;
+	unsigned long timeout = SPI_FLASH_PROG_TIMEOUT;
+	int ret;
+
+	if (buf == NULL)
+		timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT;
 
 	ret = spi_claim_bus(flash->spi);
 	if (ret) {
@@ -86,45 +129,122 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
 		return ret;
 	}
 
+	ret = spi_flash_cmd_write_enable(flash);
+	if (ret < 0) {
+		debug("SF: enabling write failed\n");
+		return ret;
+	}
+
+	ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len);
+	if (ret < 0) {
+		debug("SF: write cmd failed\n");
+		return ret;
+	}
+
+	ret = spi_flash_cmd_wait_ready(flash, timeout);
+	if (ret < 0) {
+		debug("SF: write %s timed out\n",
+			timeout == SPI_FLASH_PROG_TIMEOUT ?
+			"program" : "page erase");
+		return ret;
+	}
+
+	spi_release_bus(spi);
+
+	return ret;
+}
+
+int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
+{
+	u32 erase_size;
+	u8 cmd[4];
+	int ret = -1;
+
+	erase_size = flash->sector_size;
+	if (offset % erase_size || len % erase_size) {
+		debug("SF: Erase offset/length not multiple of erase size\n");
+		return -1;
+	}
+
+	if (erase_size == 4096)
+		cmd[0] = CMD_ERASE_4K;
+	else
+		cmd[0] = CMD_ERASE_64K;
+
+	while (len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+		u8 bank_sel;
+
+		bank_sel = offset / SPI_FLASH_16MB_BOUN;
+
+		ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
+		if (ret) {
+			debug("SF: fail to set bank%d\n", bank_sel);
+			return ret;
+		}
+#endif
+		spi_flash_addr(offset, cmd);
+
+		debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
+		      cmd[2], cmd[3], offset);
+
+		ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0);
+		if (ret < 0) {
+			debug("SF: erase failed\n");
+			break;
+		}
+
+		offset += erase_size;
+		len -= erase_size;
+	}
+
+	return ret;
+}
+
+int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
+		size_t len, const void *buf)
+{
+	unsigned long byte_addr, page_size;
+	size_t chunk_len, actual;
+	u8 cmd[4];
+	int ret = -1;
+
+	page_size = flash->page_size;
+
 	cmd[0] = CMD_PAGE_PROGRAM;
 	for (actual = 0; actual < len; actual += chunk_len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+		u8 bank_sel;
+
+		bank_sel = offset / SPI_FLASH_16MB_BOUN;
+
+		ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
+		if (ret) {
+			debug("SF: fail to set bank%d\n", bank_sel);
+			return ret;
+		}
+#endif
+		byte_addr = offset % page_size;
 		chunk_len = min(len - actual, page_size - byte_addr);
 
 		if (flash->spi->max_write_size)
 			chunk_len = min(chunk_len, flash->spi->max_write_size);
 
-		cmd[1] = page_addr >> 8;
-		cmd[2] = page_addr;
-		cmd[3] = byte_addr;
+		spi_flash_addr(offset, cmd);
 
 		debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
 		      buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
 
-		ret = spi_flash_cmd_write_enable(flash);
-		if (ret < 0) {
-			debug("SF: enabling write failed\n");
-			break;
-		}
-
-		ret = spi_flash_cmd_write(flash->spi, cmd, 4,
-					  buf + actual, chunk_len);
+		ret = spi_flash_write_common(flash, cmd, sizeof(cmd),
+					buf + actual, chunk_len);
 		if (ret < 0) {
 			debug("SF: write failed\n");
 			break;
 		}
 
-		ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
-		if (ret)
-			break;
-
-		byte_addr += chunk_len;
-		if (byte_addr == page_size) {
-			page_addr++;
-			byte_addr = 0;
-		}
+		offset += chunk_len;
 	}
 
-	spi_release_bus(flash->spi);
 	return ret;
 }
 
@@ -134,8 +254,18 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
 	struct spi_slave *spi = flash->spi;
 	int ret;
 
-	spi_claim_bus(spi);
+	ret = spi_claim_bus(flash->spi);
+	if (ret) {
+		debug("SF: unable to claim SPI bus\n");
+		return ret;
+	}
+
 	ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len);
+	if (ret < 0) {
+		debug("SF: read cmd failed\n");
+		return ret;
+	}
+
 	spi_release_bus(spi);
 
 	return ret;
@@ -144,7 +274,9 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
 int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
 		size_t len, void *data)
 {
-	u8 cmd[5];
+	u8 cmd[5], bank_sel = 0;
+	u32 remain_len, read_len;
+	int ret = -1;
 
 	/* Handle memory-mapped SPI */
 	if (flash->memory_map) {
@@ -153,130 +285,114 @@ int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
 	}
 
 	cmd[0] = CMD_READ_ARRAY_FAST;
-	spi_flash_addr(offset, cmd);
 	cmd[4] = 0x00;
 
-	return spi_flash_read_common(flash, cmd, sizeof(cmd), data, len);
-}
-
-int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
-			   u8 cmd, u8 poll_bit)
-{
-	struct spi_slave *spi = flash->spi;
-	unsigned long timebase;
-	int ret;
-	u8 status;
-
-	ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
-	if (ret) {
-		debug("SF: Failed to send command %02x: %d\n", cmd, ret);
-		return ret;
-	}
+	while (len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+		bank_sel = offset / SPI_FLASH_16MB_BOUN;
 
-	timebase = get_timer(0);
-	do {
-		WATCHDOG_RESET();
+		ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
+		if (ret) {
+			debug("SF: fail to set bank%d\n", bank_sel);
+			return ret;
+		}
+#endif
+		remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1) - offset);
+		if (len < remain_len)
+			read_len = len;
+		else
+			read_len = remain_len;
 
-		ret = spi_xfer(spi, 8, NULL, &status, 0);
-		if (ret)
-			return -1;
+		spi_flash_addr(offset, cmd);
 
-		if ((status & poll_bit) == 0)
+		ret = spi_flash_read_common(flash, cmd, sizeof(cmd),
+							data, read_len);
+		if (ret < 0) {
+			debug("SF: read failed\n");
 			break;
+		}
 
-	} while (get_timer(timebase) < timeout);
-
-	spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
-
-	if ((status & poll_bit) == 0)
-		return 0;
-
-	/* Timed out */
-	debug("SF: time out!\n");
-	return -1;
-}
+		offset += read_len;
+		len -= read_len;
+		data += read_len;
+	}
 
-int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
-{
-	return spi_flash_cmd_poll_bit(flash, timeout,
-		CMD_READ_STATUS, STATUS_WIP);
+	return ret;
 }
 
-int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
+int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
 {
-	u32 end, erase_size;
+	u8 cmd;
 	int ret;
-	u8 cmd[4];
 
-	erase_size = flash->sector_size;
-	if (offset % erase_size || len % erase_size) {
-		debug("SF: Erase offset/length not multiple of erase size\n");
-		return -1;
-	}
-
-	ret = spi_claim_bus(flash->spi);
-	if (ret) {
-		debug("SF: Unable to claim SPI bus\n");
+	cmd = CMD_WRITE_STATUS;
+	ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1);
+	if (ret < 0) {
+		debug("SF: fail to write status register\n");
 		return ret;
 	}
 
-	if (erase_size == 4096)
-		cmd[0] = CMD_ERASE_4K;
-	else
-		cmd[0] = CMD_ERASE_64K;
-	end = offset + len;
-
-	while (offset < end) {
-		spi_flash_addr(offset, cmd);
-		offset += erase_size;
-
-		debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
-		      cmd[2], cmd[3], offset);
-
-		ret = spi_flash_cmd_write_enable(flash);
-		if (ret)
-			goto out;
-
-		ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), NULL, 0);
-		if (ret)
-			goto out;
-
-		ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
-		if (ret)
-			goto out;
-	}
-
- out:
-	spi_release_bus(flash->spi);
-	return ret;
+	return 0;
 }
 
-int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
+#ifdef CONFIG_SPI_FLASH_BAR
+int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
 {
 	u8 cmd;
 	int ret;
 
-	ret = spi_flash_cmd_write_enable(flash);
+	if (flash->bank_curr == bank_sel) {
+		debug("SF: not require to enable bank%d\n", bank_sel);
+		return 0;
+	}
+
+	cmd = flash->bank_write_cmd;
+	ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
 	if (ret < 0) {
-		debug("SF: enabling write failed\n");
+		debug("SF: fail to write bank register\n");
 		return ret;
 	}
+	flash->bank_curr = bank_sel;
 
-	cmd = CMD_WRITE_STATUS;
-	ret = spi_flash_cmd_write(flash->spi, &cmd, 1, &sr, 1);
-	if (ret) {
-		debug("SF: fail to write status register\n");
-		return ret;
+	return 0;
+}
+
+int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0)
+{
+	u8 cmd;
+	u8 curr_bank = 0;
+
+	/* discover bank cmds */
+	switch (idcode0) {
+	case SPI_FLASH_SPANSION_IDCODE0:
+		flash->bank_read_cmd = CMD_BANKADDR_BRRD;
+		flash->bank_write_cmd = CMD_BANKADDR_BRWR;
+		break;
+	case SPI_FLASH_STMICRO_IDCODE0:
+	case SPI_FLASH_WINBOND_IDCODE0:
+		flash->bank_read_cmd = CMD_EXTNADDR_RDEAR;
+		flash->bank_write_cmd = CMD_EXTNADDR_WREAR;
+		break;
+	default:
+		printf("SF: Unsupported bank commands %02x\n", idcode0);
+		return -1;
 	}
 
-	ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
-	if (ret < 0) {
-		debug("SF: write status register timed out\n");
-		return ret;
+	/* read the bank reg - on which bank the flash is in currently */
+	cmd = flash->bank_read_cmd;
+	if (flash->size > SPI_FLASH_16MB_BOUN) {
+		if (spi_flash_read_common(flash, &cmd, 1, &curr_bank, 1)) {
+			debug("SF: fail to read bank addr register\n");
+			return -1;
+		}
+		flash->bank_curr = curr_bank;
+	} else {
+		flash->bank_curr = curr_bank;
 	}
 
 	return 0;
 }
+#endif
 
 #ifdef CONFIG_OF_CONTROL
 int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
@@ -425,6 +541,13 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
 		goto err_manufacturer_probe;
 	}
 
+#ifdef CONFIG_SPI_FLASH_BAR
+	/* Configure the BAR - disover bank cmds and read current bank  */
+	ret = spi_flash_bank_config(flash, *idp);
+	if (ret < 0)
+		goto err_manufacturer_probe;
+#endif
+
 #ifdef CONFIG_OF_CONTROL
 	if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
 		debug("SF: FDT decode error\n");
@@ -437,6 +560,12 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
 	if (flash->memory_map)
 		printf(", mapped at %p", flash->memory_map);
 	puts("\n");
+#ifndef CONFIG_SPI_FLASH_BAR
+	if (flash->size > SPI_FLASH_16MB_BOUN) {
+		puts("SF: Warning - Only lower 16MiB accessible,");
+		puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
+	}
+#endif
 
 	spi_release_bus(spi);
 
@@ -467,6 +596,7 @@ void *spi_flash_do_alloc(int offset, int size, struct spi_slave *spi,
 	/* Set up some basic fields - caller will sort out sizes */
 	flash->spi = spi;
 	flash->name = name;
+	flash->poll_cmd = CMD_READ_STATUS;
 
 	flash->read = spi_flash_cmd_read_fast;
 	flash->write = spi_flash_cmd_write_multi;
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index e0afbc3..af1afa9 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -22,14 +22,31 @@
 #define CMD_PAGE_PROGRAM		0x02
 #define CMD_WRITE_DISABLE		0x04
 #define CMD_READ_STATUS			0x05
+#define CMD_FLAG_STATUS			0x70
 #define CMD_WRITE_ENABLE		0x06
 #define CMD_ERASE_4K			0x20
 #define CMD_ERASE_32K			0x52
 #define CMD_ERASE_64K			0xd8
 #define CMD_ERASE_CHIP			0xc7
 
+#define SPI_FLASH_16MB_BOUN		0x1000000
+
+/* Manufacture ID's */
+#define SPI_FLASH_SPANSION_IDCODE0	0x01
+#define SPI_FLASH_STMICRO_IDCODE0	0x20
+#define SPI_FLASH_WINBOND_IDCODE0	0xef
+
+#ifdef CONFIG_SPI_FLASH_BAR
+/* Bank addr access commands */
+# define CMD_BANKADDR_BRWR		0x17
+# define CMD_BANKADDR_BRRD		0x16
+# define CMD_EXTNADDR_WREAR		0xC5
+# define CMD_EXTNADDR_RDEAR		0xC8
+#endif
+
 /* Common status */
 #define STATUS_WIP			0x01
+#define STATUS_PEC			0x80
 
 /* Send a single-byte command to the device and read the response */
 int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
@@ -77,16 +94,30 @@ static inline int spi_flash_cmd_write_disable(struct spi_flash *flash)
 /* Program the status register. */
 int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr);
 
+#ifdef CONFIG_SPI_FLASH_BAR
+/* Program the bank address register */
+int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel);
+
+/* Configure the BAR - discover the bank cmds */
+int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0);
+#endif
+
 /*
  * Same as spi_flash_cmd_read() except it also claims/releases the SPI
  * bus. Used as common part of the ->read() operation.
  */
 int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
 		size_t cmd_len, void *data, size_t data_len);
-
-/* Send a command to the device and wait for some bit to clear itself. */
-int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
-			   u8 cmd, u8 poll_bit);
+/*
+ * Used for spi_flash write operation
+ * - SPI claim
+ * - spi_flash_cmd_write_enable
+ * - spi_flash_cmd_write
+ * - spi_flash_cmd_wait_ready
+ * - SPI release
+ */
+int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
+		size_t cmd_len, const void *buf, size_t buf_len);
 
 /*
  * Send the read status command to the device and wait for the wip
diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c
index 2a9972b..7e41ee1 100644
--- a/drivers/mtd/spi/stmicro.c
+++ b/drivers/mtd/spi/stmicro.c
@@ -140,6 +140,30 @@ static const struct stmicro_spi_flash_params stmicro_spi_flash_table[] = {
 		.nr_sectors = 512,
 		.name = "N25Q256A",
 	},
+	{
+		.id = 0xba20,
+		.pages_per_sector = 256,
+		.nr_sectors = 1024,
+		.name = "N25Q512",
+	},
+	{
+		.id = 0xbb20,
+		.pages_per_sector = 256,
+		.nr_sectors = 1024,
+		.name = "N25Q512A",
+	},
+	{
+		.id = 0xba21,
+		.pages_per_sector = 256,
+		.nr_sectors = 2048,
+		.name = "N25Q1024",
+	},
+	{
+		.id = 0xbb21,
+		.pages_per_sector = 256,
+		.nr_sectors = 2048,
+		.name = "N25Q1024A",
+	},
 };
 
 struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode)
@@ -186,5 +210,9 @@ struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode)
 	flash->sector_size = 256 * params->pages_per_sector;
 	flash->size = flash->sector_size * params->nr_sectors;
 
+	/* for >= 512MiB flashes, use flag status instead of read_status */
+	if (flash->size >= 0x4000000)
+		flash->poll_cmd = CMD_FLAG_STATUS;
+
 	return flash;
 }
diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c
index 8457808..c399bf1 100644
--- a/drivers/mtd/spi/winbond.c
+++ b/drivers/mtd/spi/winbond.c
@@ -55,27 +55,27 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
 	{
 		.id			= 0x4014,
 		.nr_blocks		= 16,
-		.name			= "W25Q80BL",
+		.name			= "W25Q80BL/W25Q80BV",
 	},
 	{
 		.id			= 0x4015,
 		.nr_blocks		= 32,
-		.name			= "W25Q16",
+		.name			= "W25Q16CL/W25Q16DV",
 	},
 	{
 		.id			= 0x4016,
 		.nr_blocks		= 64,
-		.name			= "W25Q32",
+		.name			= "W25Q32BV/W25Q32FV_SPI",
 	},
 	{
 		.id			= 0x4017,
 		.nr_blocks		= 128,
-		.name			= "W25Q64",
+		.name			= "W25Q64CV/W25Q64FV_SPI",
 	},
 	{
 		.id			= 0x4018,
 		.nr_blocks		= 256,
-		.name			= "W25Q128",
+		.name			= "W25Q128BV/W25Q128FV_SPI",
 	},
 	{
 		.id			= 0x4019,
@@ -88,14 +88,24 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
 		.name			= "W25Q80BW",
 	},
 	{
+		.id			= 0x6015,
+		.nr_blocks		= 32,
+		.name			= "W25Q16DW",
+	},
+	{
 		.id			= 0x6016,
 		.nr_blocks		= 64,
-		.name			= "W25Q32DW",
+		.name			= "W25Q32DW/W25Q32FV_QPI",
 	},
 	{
 		.id			= 0x6017,
 		.nr_blocks		= 128,
-		.name			= "W25Q64DW",
+		.name			= "W25Q64DW/W25Q64FV_QPI",
+	},
+	{
+		.id			= 0x6018,
+		.nr_blocks		= 256,
+		.name			= "W25Q128FW/W25Q128FV_QPI",
 	},
 };