summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
authorWu, Josh <Josh.wu@atmel.com>2012-08-23 00:05:36 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-09-01 17:06:14 +0200
commitbdfd59aa0f00ea86b1ecf44303790eea355b8585 (patch)
treede4a131b7664e0c7aa984995ab0aad104ef8c94d /drivers/mtd/nand
parentae79794e544c5079c85596d01022b92c30a7eeb1 (diff)
downloadu-boot-imx-bdfd59aa0f00ea86b1ecf44303790eea355b8585.zip
u-boot-imx-bdfd59aa0f00ea86b1ecf44303790eea355b8585.tar.gz
u-boot-imx-bdfd59aa0f00ea86b1ecf44303790eea355b8585.tar.bz2
at91: atmel_nand: Update driver to support Programmable Multibit ECC controller
The Programmable Multibit ECC (PMECC) controller is a programmable binary BCH(Bose, Chaudhuri and Hocquenghem) encoder and decoder. This controller can be used to support both SLC and MLC NAND Flash devices. It supports to generate ECC to correct 2, 4, 8, 12 or 24 bits of error per sector of data. To use PMECC in this driver, the user needs to set the PMECC correction capability, the sector size and ROM lookup table offsets in board config file. This driver is ported from Linux kernel atmel_nand PMECC patch. The main difference is in this version it uses registers structure access hardware instead of using macros. It is tested in 9x5 serial boards. Signed-off-by: Josh Wu <josh.wu@atmel.com> [rebase] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/atmel_nand.c680
-rw-r--r--drivers/mtd/nand/atmel_nand_ecc.h113
2 files changed, 792 insertions, 1 deletions
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index cc609b1..c6aa5db 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -5,6 +5,9 @@
*
* (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
*
+ * Add Programmable Multibit ECC support for various AT91 SoC
+ * (C) Copyright 2012 ATMEL, Hong Xu
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -30,6 +33,7 @@
#include <asm/arch/at91_pio.h>
#include <nand.h>
+#include <watchdog.h>
#ifdef CONFIG_ATMEL_NAND_HWECC
@@ -41,6 +45,674 @@
#include "atmel_nand_ecc.h" /* Hardware ECC registers */
+#ifdef CONFIG_ATMEL_NAND_HW_PMECC
+
+struct atmel_nand_host {
+ struct pmecc_regs __iomem *pmecc;
+ struct pmecc_errloc_regs __iomem *pmerrloc;
+ void __iomem *pmecc_rom_base;
+
+ u8 pmecc_corr_cap;
+ u16 pmecc_sector_size;
+ u32 pmecc_index_table_offset;
+
+ int pmecc_bytes_per_sector;
+ int pmecc_sector_number;
+ int pmecc_degree; /* Degree of remainders */
+ int pmecc_cw_len; /* Length of codeword */
+
+ /* lookup table for alpha_to and index_of */
+ void __iomem *pmecc_alpha_to;
+ void __iomem *pmecc_index_of;
+
+ /* data for pmecc computation */
+ int16_t pmecc_smu[(CONFIG_PMECC_CAP + 2) * (2 * CONFIG_PMECC_CAP + 1)];
+ int16_t pmecc_partial_syn[2 * CONFIG_PMECC_CAP + 1];
+ int16_t pmecc_si[2 * CONFIG_PMECC_CAP + 1];
+ int16_t pmecc_lmu[CONFIG_PMECC_CAP + 1]; /* polynomal order */
+ int pmecc_mu[CONFIG_PMECC_CAP + 1];
+ int pmecc_dmu[CONFIG_PMECC_CAP + 1];
+ int pmecc_delta[CONFIG_PMECC_CAP + 1];
+};
+
+static struct atmel_nand_host pmecc_host;
+static struct nand_ecclayout atmel_pmecc_oobinfo;
+
+/*
+ * Return number of ecc bytes per sector according to sector size and
+ * correction capability
+ *
+ * Following table shows what at91 PMECC supported:
+ * Correction Capability Sector_512_bytes Sector_1024_bytes
+ * ===================== ================ =================
+ * 2-bits 4-bytes 4-bytes
+ * 4-bits 7-bytes 7-bytes
+ * 8-bits 13-bytes 14-bytes
+ * 12-bits 20-bytes 21-bytes
+ * 24-bits 39-bytes 42-bytes
+ */
+static int pmecc_get_ecc_bytes(int cap, int sector_size)
+{
+ int m = 12 + sector_size / 512;
+ return (m * cap + 7) / 8;
+}
+
+static void pmecc_config_ecc_layout(struct nand_ecclayout *layout,
+ int oobsize, int ecc_len)
+{
+ int i;
+
+ layout->eccbytes = ecc_len;
+
+ /* ECC will occupy the last ecc_len bytes continuously */
+ for (i = 0; i < ecc_len; i++)
+ layout->eccpos[i] = oobsize - ecc_len + i;
+
+ layout->oobfree[0].offset = 2;
+ layout->oobfree[0].length =
+ oobsize - ecc_len - layout->oobfree[0].offset;
+}
+
+static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host)
+{
+ int table_size;
+
+ table_size = host->pmecc_sector_size == 512 ?
+ PMECC_INDEX_TABLE_SIZE_512 : PMECC_INDEX_TABLE_SIZE_1024;
+
+ /* the ALPHA lookup table is right behind the INDEX lookup table. */
+ return host->pmecc_rom_base + host->pmecc_index_table_offset +
+ table_size * sizeof(int16_t);
+}
+
+static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ int i;
+ uint32_t value;
+
+ /* Fill odd syndromes */
+ for (i = 0; i < host->pmecc_corr_cap; i++) {
+ value = readl(&host->pmecc->rem_port[sector].rem[i / 2]);
+ if (i & 1)
+ value >>= 16;
+ value &= 0xffff;
+ host->pmecc_partial_syn[(2 * i) + 1] = (int16_t)value;
+ }
+}
+
+static void pmecc_substitute(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ int16_t __iomem *alpha_to = host->pmecc_alpha_to;
+ int16_t __iomem *index_of = host->pmecc_index_of;
+ int16_t *partial_syn = host->pmecc_partial_syn;
+ const int cap = host->pmecc_corr_cap;
+ int16_t *si;
+ int i, j;
+
+ /* si[] is a table that holds the current syndrome value,
+ * an element of that table belongs to the field
+ */
+ si = host->pmecc_si;
+
+ memset(&si[1], 0, sizeof(int16_t) * (2 * cap - 1));
+
+ /* Computation 2t syndromes based on S(x) */
+ /* Odd syndromes */
+ for (i = 1; i < 2 * cap; i += 2) {
+ for (j = 0; j < host->pmecc_degree; j++) {
+ if (partial_syn[i] & (0x1 << j))
+ si[i] = readw(alpha_to + i * j) ^ si[i];
+ }
+ }
+ /* Even syndrome = (Odd syndrome) ** 2 */
+ for (i = 2, j = 1; j <= cap; i = ++j << 1) {
+ if (si[j] == 0) {
+ si[i] = 0;
+ } else {
+ int16_t tmp;
+
+ tmp = readw(index_of + si[j]);
+ tmp = (tmp * 2) % host->pmecc_cw_len;
+ si[i] = readw(alpha_to + tmp);
+ }
+ }
+}
+
+/*
+ * This function defines a Berlekamp iterative procedure for
+ * finding the value of the error location polynomial.
+ * The input is si[], initialize by pmecc_substitute().
+ * The output is smu[][].
+ *
+ * This function is written according to chip datasheet Chapter:
+ * Find the Error Location Polynomial Sigma(x) of Section:
+ * Programmable Multibit ECC Control (PMECC).
+ */
+static void pmecc_get_sigma(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+
+ int16_t *lmu = host->pmecc_lmu;
+ int16_t *si = host->pmecc_si;
+ int *mu = host->pmecc_mu;
+ int *dmu = host->pmecc_dmu; /* Discrepancy */
+ int *delta = host->pmecc_delta; /* Delta order */
+ int cw_len = host->pmecc_cw_len;
+ const int16_t cap = host->pmecc_corr_cap;
+ const int num = 2 * cap + 1;
+ int16_t __iomem *index_of = host->pmecc_index_of;
+ int16_t __iomem *alpha_to = host->pmecc_alpha_to;
+ int i, j, k;
+ uint32_t dmu_0_count, tmp;
+ int16_t *smu = host->pmecc_smu;
+
+ /* index of largest delta */
+ int ro;
+ int largest;
+ int diff;
+
+ /* Init the Sigma(x) */
+ memset(smu, 0, sizeof(int16_t) * ARRAY_SIZE(smu));
+
+ dmu_0_count = 0;
+
+ /* First Row */
+
+ /* Mu */
+ mu[0] = -1;
+
+ smu[0] = 1;
+
+ /* discrepancy set to 1 */
+ dmu[0] = 1;
+ /* polynom order set to 0 */
+ lmu[0] = 0;
+ /* delta[0] = (mu[0] * 2 - lmu[0]) >> 1; */
+ delta[0] = -1;
+
+ /* Second Row */
+
+ /* Mu */
+ mu[1] = 0;
+ /* Sigma(x) set to 1 */
+ smu[num] = 1;
+
+ /* discrepancy set to S1 */
+ dmu[1] = si[1];
+
+ /* polynom order set to 0 */
+ lmu[1] = 0;
+
+ /* delta[1] = (mu[1] * 2 - lmu[1]) >> 1; */
+ delta[1] = 0;
+
+ for (i = 1; i <= cap; i++) {
+ mu[i + 1] = i << 1;
+ /* Begin Computing Sigma (Mu+1) and L(mu) */
+ /* check if discrepancy is set to 0 */
+ if (dmu[i] == 0) {
+ dmu_0_count++;
+
+ tmp = ((cap - (lmu[i] >> 1) - 1) / 2);
+ if ((cap - (lmu[i] >> 1) - 1) & 0x1)
+ tmp += 2;
+ else
+ tmp += 1;
+
+ if (dmu_0_count == tmp) {
+ for (j = 0; j <= (lmu[i] >> 1) + 1; j++)
+ smu[(cap + 1) * num + j] =
+ smu[i * num + j];
+
+ lmu[cap + 1] = lmu[i];
+ return;
+ }
+
+ /* copy polynom */
+ for (j = 0; j <= lmu[i] >> 1; j++)
+ smu[(i + 1) * num + j] = smu[i * num + j];
+
+ /* copy previous polynom order to the next */
+ lmu[i + 1] = lmu[i];
+ } else {
+ ro = 0;
+ largest = -1;
+ /* find largest delta with dmu != 0 */
+ for (j = 0; j < i; j++) {
+ if ((dmu[j]) && (delta[j] > largest)) {
+ largest = delta[j];
+ ro = j;
+ }
+ }
+
+ /* compute difference */
+ diff = (mu[i] - mu[ro]);
+
+ /* Compute degree of the new smu polynomial */
+ if ((lmu[i] >> 1) > ((lmu[ro] >> 1) + diff))
+ lmu[i + 1] = lmu[i];
+ else
+ lmu[i + 1] = ((lmu[ro] >> 1) + diff) * 2;
+
+ /* Init smu[i+1] with 0 */
+ for (k = 0; k < num; k++)
+ smu[(i + 1) * num + k] = 0;
+
+ /* Compute smu[i+1] */
+ for (k = 0; k <= lmu[ro] >> 1; k++) {
+ int16_t a, b, c;
+
+ if (!(smu[ro * num + k] && dmu[i]))
+ continue;
+ a = readw(index_of + dmu[i]);
+ b = readw(index_of + dmu[ro]);
+ c = readw(index_of + smu[ro * num + k]);
+ tmp = a + (cw_len - b) + c;
+ a = readw(alpha_to + tmp % cw_len);
+ smu[(i + 1) * num + (k + diff)] = a;
+ }
+
+ for (k = 0; k <= lmu[i] >> 1; k++)
+ smu[(i + 1) * num + k] ^= smu[i * num + k];
+ }
+
+ /* End Computing Sigma (Mu+1) and L(mu) */
+ /* In either case compute delta */
+ delta[i + 1] = (mu[i + 1] * 2 - lmu[i + 1]) >> 1;
+
+ /* Do not compute discrepancy for the last iteration */
+ if (i >= cap)
+ continue;
+
+ for (k = 0; k <= (lmu[i + 1] >> 1); k++) {
+ tmp = 2 * (i - 1);
+ if (k == 0) {
+ dmu[i + 1] = si[tmp + 3];
+ } else if (smu[(i + 1) * num + k] && si[tmp + 3 - k]) {
+ int16_t a, b, c;
+ a = readw(index_of +
+ smu[(i + 1) * num + k]);
+ b = si[2 * (i - 1) + 3 - k];
+ c = readw(index_of + b);
+ tmp = a + c;
+ tmp %= cw_len;
+ dmu[i + 1] = readw(alpha_to + tmp) ^
+ dmu[i + 1];
+ }
+ }
+ }
+}
+
+static int pmecc_err_location(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ const int cap = host->pmecc_corr_cap;
+ const int num = 2 * cap + 1;
+ int sector_size = host->pmecc_sector_size;
+ int err_nbr = 0; /* number of error */
+ int roots_nbr; /* number of roots */
+ int i;
+ uint32_t val;
+ int16_t *smu = host->pmecc_smu;
+ int timeout = PMECC_MAX_TIMEOUT_US;
+
+ writel(PMERRLOC_DISABLE, &host->pmerrloc->eldis);
+
+ for (i = 0; i <= host->pmecc_lmu[cap + 1] >> 1; i++) {
+ writel(smu[(cap + 1) * num + i], &host->pmerrloc->sigma[i]);
+ err_nbr++;
+ }
+
+ val = PMERRLOC_ELCFG_NUM_ERRORS(err_nbr - 1);
+ if (sector_size == 1024)
+ val |= PMERRLOC_ELCFG_SECTOR_1024;
+
+ writel(val, &host->pmerrloc->elcfg);
+ writel(sector_size * 8 + host->pmecc_degree * cap,
+ &host->pmerrloc->elen);
+
+ while (--timeout) {
+ if (readl(&host->pmerrloc->elisr) & PMERRLOC_CALC_DONE)
+ break;
+ WATCHDOG_RESET();
+ udelay(1);
+ }
+
+ if (!timeout) {
+ printk(KERN_ERR "atmel_nand : Timeout to calculate PMECC error location\n");
+ return -1;
+ }
+
+ roots_nbr = (readl(&host->pmerrloc->elisr) & PMERRLOC_ERR_NUM_MASK)
+ >> 8;
+ /* Number of roots == degree of smu hence <= cap */
+ if (roots_nbr == host->pmecc_lmu[cap + 1] >> 1)
+ return err_nbr - 1;
+
+ /* Number of roots does not match the degree of smu
+ * unable to correct error */
+ return -1;
+}
+
+static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
+ int sector_num, int extra_bytes, int err_nbr)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ int i = 0;
+ int byte_pos, bit_pos, sector_size, pos;
+ uint32_t tmp;
+ uint8_t err_byte;
+
+ sector_size = host->pmecc_sector_size;
+
+ while (err_nbr) {
+ tmp = readl(&host->pmerrloc->el[i]) - 1;
+ byte_pos = tmp / 8;
+ bit_pos = tmp % 8;
+
+ if (byte_pos >= (sector_size + extra_bytes))
+ BUG(); /* should never happen */
+
+ if (byte_pos < sector_size) {
+ err_byte = *(buf + byte_pos);
+ *(buf + byte_pos) ^= (1 << bit_pos);
+
+ pos = sector_num * host->pmecc_sector_size + byte_pos;
+ printk(KERN_INFO "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ pos, bit_pos, err_byte, *(buf + byte_pos));
+ } else {
+ /* Bit flip in OOB area */
+ tmp = sector_num * host->pmecc_bytes_per_sector
+ + (byte_pos - sector_size);
+ err_byte = ecc[tmp];
+ ecc[tmp] ^= (1 << bit_pos);
+
+ pos = tmp + nand_chip->ecc.layout->eccpos[0];
+ printk(KERN_INFO "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ pos, bit_pos, err_byte, ecc[tmp]);
+ }
+
+ i++;
+ err_nbr--;
+ }
+
+ return;
+}
+
+static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
+ u8 *ecc)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ int i, err_nbr, eccbytes;
+ uint8_t *buf_pos;
+
+ eccbytes = nand_chip->ecc.bytes;
+ for (i = 0; i < eccbytes; i++)
+ if (ecc[i] != 0xff)
+ goto normal_check;
+ /* Erased page, return OK */
+ return 0;
+
+normal_check:
+ for (i = 0; i < host->pmecc_sector_number; i++) {
+ err_nbr = 0;
+ if (pmecc_stat & 0x1) {
+ buf_pos = buf + i * host->pmecc_sector_size;
+
+ pmecc_gen_syndrome(mtd, i);
+ pmecc_substitute(mtd);
+ pmecc_get_sigma(mtd);
+
+ err_nbr = pmecc_err_location(mtd);
+ if (err_nbr == -1) {
+ printk(KERN_ERR "PMECC: Too many errors\n");
+ mtd->ecc_stats.failed++;
+ return -EIO;
+ } else {
+ pmecc_correct_data(mtd, buf_pos, ecc, i,
+ host->pmecc_bytes_per_sector, err_nbr);
+ mtd->ecc_stats.corrected += err_nbr;
+ }
+ }
+ pmecc_stat >>= 1;
+ }
+
+ return 0;
+}
+
+static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf, int page)
+{
+ struct atmel_nand_host *host = chip->priv;
+ int eccsize = chip->ecc.size;
+ uint8_t *oob = chip->oob_poi;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint32_t stat;
+ int timeout = PMECC_MAX_TIMEOUT_US;
+
+ pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_RST);
+ pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DISABLE);
+ pmecc_writel(host->pmecc, cfg, ((pmecc_readl(host->pmecc, cfg))
+ & ~PMECC_CFG_WRITE_OP) | PMECC_CFG_AUTO_ENABLE);
+
+ pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_ENABLE);
+ pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DATA);
+
+ chip->read_buf(mtd, buf, eccsize);
+ chip->read_buf(mtd, oob, mtd->oobsize);
+
+ while (--timeout) {
+ if (!(pmecc_readl(host->pmecc, sr) & PMECC_SR_BUSY))
+ break;
+ WATCHDOG_RESET();
+ udelay(1);
+ }
+
+ if (!timeout) {
+ printk(KERN_ERR "atmel_nand : Timeout to read PMECC page\n");
+ return -1;
+ }
+
+ stat = pmecc_readl(host->pmecc, isr);
+ if (stat != 0)
+ if (pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]) != 0)
+ return -EIO;
+
+ return 0;
+}
+
+static void atmel_nand_pmecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf)
+{
+ struct atmel_nand_host *host = chip->priv;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ int i, j;
+ int timeout = PMECC_MAX_TIMEOUT_US;
+
+ pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_RST);
+ pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DISABLE);
+
+ pmecc_writel(host->pmecc, cfg, (pmecc_readl(host->pmecc, cfg) |
+ PMECC_CFG_WRITE_OP) & ~PMECC_CFG_AUTO_ENABLE);
+
+ pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_ENABLE);
+ pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DATA);
+
+ chip->write_buf(mtd, (u8 *)buf, mtd->writesize);
+
+ while (--timeout) {
+ if (!(pmecc_readl(host->pmecc, sr) & PMECC_SR_BUSY))
+ break;
+ WATCHDOG_RESET();
+ udelay(1);
+ }
+
+ if (!timeout) {
+ printk(KERN_ERR "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
+ return;
+ }
+
+ for (i = 0; i < host->pmecc_sector_number; i++) {
+ for (j = 0; j < host->pmecc_bytes_per_sector; j++) {
+ int pos;
+
+ pos = i * host->pmecc_bytes_per_sector + j;
+ chip->oob_poi[eccpos[pos]] =
+ readb(&host->pmecc->ecc_port[i].ecc[j]);
+ }
+ }
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}
+
+static void atmel_pmecc_core_init(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ uint32_t val = 0;
+ struct nand_ecclayout *ecc_layout;
+
+ pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_RST);
+ pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DISABLE);
+
+ switch (host->pmecc_corr_cap) {
+ case 2:
+ val = PMECC_CFG_BCH_ERR2;
+ break;
+ case 4:
+ val = PMECC_CFG_BCH_ERR4;
+ break;
+ case 8:
+ val = PMECC_CFG_BCH_ERR8;
+ break;
+ case 12:
+ val = PMECC_CFG_BCH_ERR12;
+ break;
+ case 24:
+ val = PMECC_CFG_BCH_ERR24;
+ break;
+ }
+
+ if (host->pmecc_sector_size == 512)
+ val |= PMECC_CFG_SECTOR512;
+ else if (host->pmecc_sector_size == 1024)
+ val |= PMECC_CFG_SECTOR1024;
+
+ switch (host->pmecc_sector_number) {
+ case 1:
+ val |= PMECC_CFG_PAGE_1SECTOR;
+ break;
+ case 2:
+ val |= PMECC_CFG_PAGE_2SECTORS;
+ break;
+ case 4:
+ val |= PMECC_CFG_PAGE_4SECTORS;
+ break;
+ case 8:
+ val |= PMECC_CFG_PAGE_8SECTORS;
+ break;
+ }
+
+ val |= (PMECC_CFG_READ_OP | PMECC_CFG_SPARE_DISABLE
+ | PMECC_CFG_AUTO_DISABLE);
+ pmecc_writel(host->pmecc, cfg, val);
+
+ ecc_layout = nand_chip->ecc.layout;
+ pmecc_writel(host->pmecc, sarea, mtd->oobsize - 1);
+ pmecc_writel(host->pmecc, saddr, ecc_layout->eccpos[0]);
+ pmecc_writel(host->pmecc, eaddr,
+ ecc_layout->eccpos[ecc_layout->eccbytes - 1]);
+ /* See datasheet about PMECC Clock Control Register */
+ pmecc_writel(host->pmecc, clk, PMECC_CLK_133MHZ);
+ pmecc_writel(host->pmecc, idr, 0xff);
+ pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_ENABLE);
+}
+
+static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
+ struct mtd_info *mtd)
+{
+ struct atmel_nand_host *host;
+ int cap, sector_size;
+
+ host = nand->priv = &pmecc_host;
+
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.calculate = NULL;
+ nand->ecc.correct = NULL;
+ nand->ecc.hwctl = NULL;
+
+ cap = host->pmecc_corr_cap = CONFIG_PMECC_CAP;
+ sector_size = host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE;
+ host->pmecc_index_table_offset = CONFIG_PMECC_INDEX_TABLE_OFFSET;
+
+ printk(KERN_INFO "Initialize PMECC params, cap: %d, sector: %d\n",
+ cap, sector_size);
+
+ host->pmecc = (struct pmecc_regs __iomem *) ATMEL_BASE_PMECC;
+ host->pmerrloc = (struct pmecc_errloc_regs __iomem *)
+ ATMEL_BASE_PMERRLOC;
+ host->pmecc_rom_base = (void __iomem *) ATMEL_BASE_ROM;
+
+ /* ECC is calculated for the whole page (1 step) */
+ nand->ecc.size = mtd->writesize;
+
+ /* set ECC page size and oob layout */
+ switch (mtd->writesize) {
+ case 2048:
+ case 4096:
+ host->pmecc_degree = PMECC_GF_DIMENSION_13;
+ host->pmecc_cw_len = (1 << host->pmecc_degree) - 1;
+ host->pmecc_sector_number = mtd->writesize / sector_size;
+ host->pmecc_bytes_per_sector = pmecc_get_ecc_bytes(
+ cap, sector_size);
+ host->pmecc_alpha_to = pmecc_get_alpha_to(host);
+ host->pmecc_index_of = host->pmecc_rom_base +
+ host->pmecc_index_table_offset;
+
+ nand->ecc.steps = 1;
+ nand->ecc.bytes = host->pmecc_bytes_per_sector *
+ host->pmecc_sector_number;
+ if (nand->ecc.bytes > mtd->oobsize - 2) {
+ printk(KERN_ERR "No room for ECC bytes\n");
+ return -EINVAL;
+ }
+ pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
+ mtd->oobsize,
+ nand->ecc.bytes);
+ nand->ecc.layout = &atmel_pmecc_oobinfo;
+ break;
+ case 512:
+ case 1024:
+ /* TODO */
+ printk(KERN_ERR "Unsupported page size for PMECC, use Software ECC\n");
+ default:
+ /* page size not handled by HW ECC */
+ /* switching back to soft ECC */
+ nand->ecc.mode = NAND_ECC_SOFT;
+ nand->ecc.read_page = NULL;
+ nand->ecc.postpad = 0;
+ nand->ecc.prepad = 0;
+ nand->ecc.bytes = 0;
+ return 0;
+ }
+
+ nand->ecc.read_page = atmel_nand_pmecc_read_page;
+ nand->ecc.write_page = atmel_nand_pmecc_write_page;
+
+ atmel_pmecc_core_init(mtd);
+
+ return 0;
+}
+
+#else
+
/* oob layout for large page size
* bad block info is on bytes 0 and 1
* the bytes have to be consecutives to avoid
@@ -285,7 +957,9 @@ int atmel_hwecc_nand_init_param(struct nand_chip *nand, struct mtd_info *mtd)
return 0;
}
-#endif
+#endif /* CONFIG_ATMEL_NAND_HW_PMECC */
+
+#endif /* CONFIG_ATMEL_NAND_HWECC */
static void at91_nand_hwcontrol(struct mtd_info *mtd,
int cmd, unsigned int ctrl)
@@ -350,7 +1024,11 @@ int atmel_nand_chip_init(int devnum, ulong base_addr)
return ret;
#ifdef CONFIG_ATMEL_NAND_HWECC
+#ifdef CONFIG_ATMEL_NAND_HW_PMECC
+ ret = atmel_pmecc_nand_init_params(nand, mtd);
+#else
ret = atmel_hwecc_nand_init_param(nand, mtd);
+#endif
if (ret)
return ret;
#endif
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
index 1ee7f99..4732582 100644
--- a/drivers/mtd/nand/atmel_nand_ecc.h
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -33,4 +33,117 @@
#define ATMEL_ECC_NPR 0x10 /* NParity register */
#define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */
+/* Register access macros for PMECC */
+#define pmecc_readl(addr, reg) \
+ readl(&addr->reg)
+
+#define pmecc_writel(addr, reg, value) \
+ writel((value), &addr->reg)
+
+/* PMECC Register Definitions */
+#define PMECC_MAX_SECTOR_NUM 8
+struct pmecc_regs {
+ u32 cfg; /* 0x00 PMECC Configuration Register */
+ u32 sarea; /* 0x04 PMECC Spare Area Size Register */
+ u32 saddr; /* 0x08 PMECC Start Address Register */
+ u32 eaddr; /* 0x0C PMECC End Address Register */
+ u32 clk; /* 0x10 PMECC Clock Control Register */
+ u32 ctrl; /* 0x14 PMECC Control Register */
+ u32 sr; /* 0x18 PMECC Status Register */
+ u32 ier; /* 0x1C PMECC Interrupt Enable Register */
+ u32 idr; /* 0x20 PMECC Interrupt Disable Register */
+ u32 imr; /* 0x24 PMECC Interrupt Mask Register */
+ u32 isr; /* 0x28 PMECC Interrupt Status Register */
+ u32 reserved0[5]; /* 0x2C-0x3C Reserved */
+
+ /* 0x40 + sector_num * (0x40), Redundancy Registers */
+ struct {
+ u8 ecc[44]; /* PMECC Generated Redundancy Byte Per Sector */
+ u32 reserved1[5];
+ } ecc_port[PMECC_MAX_SECTOR_NUM];
+
+ /* 0x240 + sector_num * (0x40) Remainder Registers */
+ struct {
+ u32 rem[12];
+ u32 reserved2[4];
+ } rem_port[PMECC_MAX_SECTOR_NUM];
+ u32 reserved3[16]; /* 0x440-0x47C Reserved */
+};
+
+/* For PMECC Configuration Register */
+#define PMECC_CFG_BCH_ERR2 (0 << 0)
+#define PMECC_CFG_BCH_ERR4 (1 << 0)
+#define PMECC_CFG_BCH_ERR8 (2 << 0)
+#define PMECC_CFG_BCH_ERR12 (3 << 0)
+#define PMECC_CFG_BCH_ERR24 (4 << 0)
+
+#define PMECC_CFG_SECTOR512 (0 << 4)
+#define PMECC_CFG_SECTOR1024 (1 << 4)
+
+#define PMECC_CFG_PAGE_1SECTOR (0 << 8)
+#define PMECC_CFG_PAGE_2SECTORS (1 << 8)
+#define PMECC_CFG_PAGE_4SECTORS (2 << 8)
+#define PMECC_CFG_PAGE_8SECTORS (3 << 8)
+
+#define PMECC_CFG_READ_OP (0 << 12)
+#define PMECC_CFG_WRITE_OP (1 << 12)
+
+#define PMECC_CFG_SPARE_ENABLE (1 << 16)
+#define PMECC_CFG_SPARE_DISABLE (0 << 16)
+
+#define PMECC_CFG_AUTO_ENABLE (1 << 20)
+#define PMECC_CFG_AUTO_DISABLE (0 << 20)
+
+/* For PMECC Clock Control Register */
+#define PMECC_CLK_133MHZ (2 << 0)
+
+/* For PMECC Control Register */
+#define PMECC_CTRL_RST (1 << 0)
+#define PMECC_CTRL_DATA (1 << 1)
+#define PMECC_CTRL_USER (1 << 2)
+#define PMECC_CTRL_ENABLE (1 << 4)
+#define PMECC_CTRL_DISABLE (1 << 5)
+
+/* For PMECC Status Register */
+#define PMECC_SR_BUSY (1 << 0)
+#define PMECC_SR_ENABLE (1 << 4)
+
+/* PMERRLOC Register Definitions */
+struct pmecc_errloc_regs {
+ u32 elcfg; /* 0x00 Error Location Configuration Register */
+ u32 elprim; /* 0x04 Error Location Primitive Register */
+ u32 elen; /* 0x08 Error Location Enable Register */
+ u32 eldis; /* 0x0C Error Location Disable Register */
+ u32 elsr; /* 0x10 Error Location Status Register */
+ u32 elier; /* 0x14 Error Location Interrupt Enable Register */
+ u32 elidr; /* 0x08 Error Location Interrupt Disable Register */
+ u32 elimr; /* 0x0C Error Location Interrupt Mask Register */
+ u32 elisr; /* 0x20 Error Location Interrupt Status Register */
+ u32 reserved0; /* 0x24 Reserved */
+ u32 sigma[25]; /* 0x28-0x88 Error Location Sigma Registers */
+ u32 el[24]; /* 0x8C-0xE8 Error Location Registers */
+ u32 reserved1[5]; /* 0xEC-0xFC Reserved */
+};
+
+/* For Error Location Configuration Register */
+#define PMERRLOC_ELCFG_SECTOR_512 (0 << 0)
+#define PMERRLOC_ELCFG_SECTOR_1024 (1 << 0)
+#define PMERRLOC_ELCFG_NUM_ERRORS(n) ((n) << 16)
+
+/* For Error Location Disable Register */
+#define PMERRLOC_DISABLE (1 << 0)
+
+/* For Error Location Interrupt Status Register */
+#define PMERRLOC_ERR_NUM_MASK (0x1f << 8)
+#define PMERRLOC_CALC_DONE (1 << 0)
+
+/* Galois field dimension */
+#define PMECC_GF_DIMENSION_13 13
+#define PMECC_GF_DIMENSION_14 14
+
+#define PMECC_INDEX_TABLE_SIZE_512 0x2000
+#define PMECC_INDEX_TABLE_SIZE_1024 0x4000
+
+#define PMECC_MAX_TIMEOUT_US (100 * 1000)
+
#endif