summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
authorAlbert ARIBAUD <albert.u.boot@aribaud.net>2013-12-10 14:31:56 +0100
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2013-12-10 22:23:59 +0100
commitf15ea6e1d67782a1626d4a4922b6c20e380085e5 (patch)
tree57d78f1ee94a2060eaa591533278d2934d4f1da3 /drivers/mtd/nand
parentcb7ee1b98cac6baf244daefb1192adf5a47bc983 (diff)
parentf44483b57c49282299da0e5c10073b909cdad979 (diff)
downloadu-boot-imx-f15ea6e1d67782a1626d4a4922b6c20e380085e5.zip
u-boot-imx-f15ea6e1d67782a1626d4a4922b6c20e380085e5.tar.gz
u-boot-imx-f15ea6e1d67782a1626d4a4922b6c20e380085e5.tar.bz2
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts: arch/arm/cpu/armv7/rmobile/Makefile doc/README.scrapyard Needed manual fix: arch/arm/cpu/armv7/omap-common/Makefile board/compulab/cm_t335/u-boot.lds
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/atmel_nand.c40
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c101
-rw-r--r--drivers/mtd/nand/fsl_ifc_spl.c9
-rw-r--r--drivers/mtd/nand/omap_elm.c196
-rw-r--r--drivers/mtd/nand/omap_gpmc.c321
6 files changed, 520 insertions, 148 deletions
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index eb1eafa..e145cd1 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
+obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
obj-$(CONFIG_NAND_PLAT) += nand_plat.o
obj-$(CONFIG_NAND_DOCG4) += docg4.o
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 99fc86c..05ddfbb 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -411,7 +411,7 @@ static int pmecc_err_location(struct mtd_info *mtd)
}
if (!timeout) {
- printk(KERN_ERR "atmel_nand : Timeout to calculate PMECC error location\n");
+ dev_err(host->dev, "atmel_nand : Timeout to calculate PMECC error location\n");
return -1;
}
@@ -451,7 +451,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
*(buf + byte_pos) ^= (1 << bit_pos);
pos = sector_num * host->pmecc_sector_size + byte_pos;
- printk(KERN_INFO "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, *(buf + byte_pos));
} else {
/* Bit flip in OOB area */
@@ -461,7 +461,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
ecc[tmp] ^= (1 << bit_pos);
pos = tmp + nand_chip->ecc.layout->eccpos[0];
- printk(KERN_INFO "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, ecc[tmp]);
}
@@ -499,7 +499,7 @@ normal_check:
err_nbr = pmecc_err_location(mtd);
if (err_nbr == -1) {
- printk(KERN_ERR "PMECC: Too many errors\n");
+ dev_err(host->dev, "PMECC: Too many errors\n");
mtd->ecc_stats.failed++;
return -EIO;
} else {
@@ -543,7 +543,7 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
}
if (!timeout) {
- printk(KERN_ERR "atmel_nand : Timeout to read PMECC page\n");
+ dev_err(host->dev, "atmel_nand : Timeout to read PMECC page\n");
return -1;
}
@@ -583,7 +583,7 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
}
if (!timeout) {
- printk(KERN_ERR "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
+ dev_err(host->dev, "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
goto out;
}
@@ -826,6 +826,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
switch (mtd->writesize) {
case 2048:
case 4096:
+ case 8192:
host->pmecc_degree = (sector_size == 512) ?
PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14;
host->pmecc_cw_len = (1 << host->pmecc_degree) - 1;
@@ -839,8 +840,15 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
nand->ecc.steps = 1;
nand->ecc.bytes = host->pmecc_bytes_per_sector *
host->pmecc_sector_number;
+
+ if (nand->ecc.bytes > MTD_MAX_ECCPOS_ENTRIES_LARGE) {
+ dev_err(host->dev, "too large eccpos entries. max support ecc.bytes is %d\n",
+ MTD_MAX_ECCPOS_ENTRIES_LARGE);
+ return -EINVAL;
+ }
+
if (nand->ecc.bytes > mtd->oobsize - 2) {
- printk(KERN_ERR "No room for ECC bytes\n");
+ dev_err(host->dev, "No room for ECC bytes\n");
return -EINVAL;
}
pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
@@ -851,7 +859,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
case 512:
case 1024:
/* TODO */
- printk(KERN_ERR "Unsupported page size for PMECC, use Software ECC\n");
+ dev_err(host->dev, "Unsupported page size for PMECC, use Software ECC\n");
default:
/* page size not handled by HW ECC */
/* switching back to soft ECC */
@@ -1034,7 +1042,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
/* it doesn't seems to be a freshly
* erased block.
* We can't correct so many errors */
- printk(KERN_WARNING "atmel_nand : multiple errors detected."
+ dev_warn(host->dev, "atmel_nand : multiple errors detected."
" Unable to correct.\n");
return -EIO;
}
@@ -1044,12 +1052,12 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
/* there's nothing much to do here.
* the bit error is on the ECC itself.
*/
- printk(KERN_WARNING "atmel_nand : one bit error on ECC code."
+ dev_warn(host->dev, "atmel_nand : one bit error on ECC code."
" Nothing to correct\n");
return 0;
}
- printk(KERN_WARNING "atmel_nand : one bit error on data."
+ dev_warn(host->dev, "atmel_nand : one bit error on data."
" (word offset in the page :"
" 0x%x bit offset : 0x%x)\n",
ecc_word, ecc_bit);
@@ -1061,7 +1069,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
/* 8 bits words */
dat[ecc_word] ^= (1 << ecc_bit);
}
- printk(KERN_WARNING "atmel_nand : error corrected\n");
+ dev_warn(host->dev, "atmel_nand : error corrected\n");
return 1;
}
@@ -1176,7 +1184,11 @@ int atmel_nand_chip_init(int devnum, ulong base_addr)
mtd->priv = nand;
nand->IO_ADDR_R = nand->IO_ADDR_W = (void __iomem *)base_addr;
+#ifdef CONFIG_NAND_ECC_BCH
+ nand->ecc.mode = NAND_ECC_SOFT_BCH;
+#else
nand->ecc.mode = NAND_ECC_SOFT;
+#endif
#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
@@ -1184,7 +1196,7 @@ int atmel_nand_chip_init(int devnum, ulong base_addr)
#ifdef CONFIG_SYS_NAND_READY_PIN
nand->dev_ready = at91_nand_ready;
#endif
- nand->chip_delay = 20;
+ nand->chip_delay = 75;
ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL);
if (ret)
@@ -1212,6 +1224,6 @@ void board_nand_init(void)
int i;
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
if (atmel_nand_chip_init(i, base_addr[i]))
- printk(KERN_ERR "atmel_nand: Fail to initialize #%d chip",
+ dev_err(host->dev, "atmel_nand: Fail to initialize #%d chip",
i);
}
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 98a09c0..1808a7f 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -17,7 +17,7 @@
#include <asm/io.h>
#include <asm/errno.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
#define FSL_IFC_V1_1_0 0x01010000
#define MAX_BANKS 4
@@ -125,6 +125,69 @@ static struct nand_ecclayout oob_4096_ecc8 = {
.oobfree = { {2, 6}, {136, 82} },
};
+/* 8192-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_8192_ecc4 = {
+ .eccbytes = 128,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 64, 65, 66, 67, 68, 69, 70, 71,
+ 72, 73, 74, 75, 76, 77, 78, 79,
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127,
+ 128, 129, 130, 131, 132, 133, 134, 135,
+ },
+ .oobfree = { {2, 6}, {136, 208} },
+};
+
+/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */
+static struct nand_ecclayout oob_8192_ecc8 = {
+ .eccbytes = 256,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 64, 65, 66, 67, 68, 69, 70, 71,
+ 72, 73, 74, 75, 76, 77, 78, 79,
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127,
+ 128, 129, 130, 131, 132, 133, 134, 135,
+ 136, 137, 138, 139, 140, 141, 142, 143,
+ 144, 145, 146, 147, 148, 149, 150, 151,
+ 152, 153, 154, 155, 156, 157, 158, 159,
+ 160, 161, 162, 163, 164, 165, 166, 167,
+ 168, 169, 170, 171, 172, 173, 174, 175,
+ 176, 177, 178, 179, 180, 181, 182, 183,
+ 184, 185, 186, 187, 188, 189, 190, 191,
+ 192, 193, 194, 195, 196, 197, 198, 199,
+ 200, 201, 202, 203, 204, 205, 206, 207,
+ 208, 209, 210, 211, 212, 213, 214, 215,
+ 216, 217, 218, 219, 220, 221, 222, 223,
+ 224, 225, 226, 227, 228, 229, 230, 231,
+ 232, 233, 234, 235, 236, 237, 238, 239,
+ 240, 241, 242, 243, 244, 245, 246, 247,
+ 248, 249, 250, 251, 252, 253, 254, 255,
+ 256, 257, 258, 259, 260, 261, 262, 263,
+ },
+ .oobfree = { {2, 6}, {264, 80} },
+};
/*
* Generic flash bbt descriptors
@@ -428,20 +491,27 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
if (mtd->writesize > 512) {
nand_fcr0 =
(NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) |
- (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT);
+ (NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) |
+ (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT);
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
(IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) |
- (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fir1, 0);
+ (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT));
+ out_be32(&ifc->ifc_nand.nand_fir1,
+ (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) |
+ (IFC_FIR_OP_RDSTAT <<
+ IFC_NAND_FIR1_OP6_SHIFT) |
+ (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT));
} else {
nand_fcr0 = ((NAND_CMD_PAGEPROG <<
IFC_NAND_FCR0_CMD1_SHIFT) |
(NAND_CMD_SEQIN <<
- IFC_NAND_FCR0_CMD2_SHIFT));
+ IFC_NAND_FCR0_CMD2_SHIFT) |
+ (NAND_CMD_STATUS <<
+ IFC_NAND_FCR0_CMD3_SHIFT));
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
@@ -450,7 +520,11 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
(IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT));
out_be32(&ifc->ifc_nand.nand_fir1,
- (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT));
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) |
+ (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) |
+ (IFC_FIR_OP_RDSTAT <<
+ IFC_NAND_FIR1_OP7_SHIFT) |
+ (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT));
if (column >= mtd->writesize)
nand_fcr0 |=
@@ -902,6 +976,21 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr)
priv->bufnum_mask = 1;
break;
+ case CSOR_NAND_PGS_8K:
+ if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
+ CSOR_NAND_ECC_MODE_4) {
+ layout = &oob_8192_ecc4;
+ nand->ecc.strength = 4;
+ } else {
+ layout = &oob_8192_ecc8;
+ nand->ecc.strength = 8;
+ nand->ecc.bytes = 16;
+ }
+
+ priv->bufnum_mask = 0;
+ break;
+
+
default:
printf("ifc nand: bad csor %#x: bad page size\n", csor);
return -ENODEV;
diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c
index d462265..9de327b 100644
--- a/drivers/mtd/nand/fsl_ifc_spl.c
+++ b/drivers/mtd/nand/fsl_ifc_spl.c
@@ -9,7 +9,7 @@
#include <common.h>
#include <asm/io.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
#include <linux/mtd/nand.h>
static inline int is_blank(uchar *addr, int page_size)
@@ -112,10 +112,13 @@ static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8;
- if (csor & CSOR_NAND_PGS_4K) {
+ if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_8K) {
+ page_size = 8192;
+ bufnum_mask = 0x0;
+ } else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_4K) {
page_size = 4096;
bufnum_mask = 0x1;
- } else if (csor & CSOR_NAND_PGS_2K) {
+ } else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_2K) {
page_size = 2048;
bufnum_mask = 0x3;
} else {
diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c
new file mode 100644
index 0000000..2aa7807
--- /dev/null
+++ b/drivers/mtd/nand/omap_elm.c
@@ -0,0 +1,196 @@
+/*
+ * (C) Copyright 2010-2011 Texas Instruments, <www.ti.com>
+ * Mansoor Ahamed <mansoor.ahamed@ti.com>
+ *
+ * BCH Error Location Module (ELM) support.
+ *
+ * NOTE:
+ * 1. Supports only continuous mode. Dont see need for page mode in uboot
+ * 2. Supports only syndrome polynomial 0. i.e. poly local variable is
+ * always set to ELM_DEFAULT_POLY. Dont see need for other polynomial
+ * sets in uboot
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/cpu.h>
+#include <asm/omap_gpmc.h>
+#include <asm/omap_elm.h>
+
+#define ELM_DEFAULT_POLY (0)
+
+struct elm *elm_cfg;
+
+/**
+ * elm_load_syndromes - Load BCH syndromes based on nibble selection
+ * @syndrome: BCH syndrome
+ * @nibbles:
+ * @poly: Syndrome Polynomial set to use
+ *
+ * Load BCH syndromes based on nibble selection
+ */
+static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
+{
+ u32 *ptr;
+ u32 val;
+
+ /* reg 0 */
+ ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[0];
+ val = syndrome[0] | (syndrome[1] << 8) | (syndrome[2] << 16) |
+ (syndrome[3] << 24);
+ writel(val, ptr);
+ /* reg 1 */
+ ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[1];
+ val = syndrome[4] | (syndrome[5] << 8) | (syndrome[6] << 16) |
+ (syndrome[7] << 24);
+ writel(val, ptr);
+
+ /* BCH 8-bit with 26 nibbles (4*8=32) */
+ if (nibbles > 13) {
+ /* reg 2 */
+ ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2];
+ val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) |
+ (syndrome[11] << 24);
+ writel(val, ptr);
+ /* reg 3 */
+ ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[3];
+ val = syndrome[12] | (syndrome[13] << 8) |
+ (syndrome[14] << 16) | (syndrome[15] << 24);
+ writel(val, ptr);
+ }
+
+ /* BCH 16-bit with 52 nibbles (7*8=56) */
+ if (nibbles > 26) {
+ /* reg 4 */
+ ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4];
+ val = syndrome[16] | (syndrome[17] << 8) |
+ (syndrome[18] << 16) | (syndrome[19] << 24);
+ writel(val, ptr);
+
+ /* reg 5 */
+ ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[5];
+ val = syndrome[20] | (syndrome[21] << 8) |
+ (syndrome[22] << 16) | (syndrome[23] << 24);
+ writel(val, ptr);
+
+ /* reg 6 */
+ ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6];
+ val = syndrome[24] | (syndrome[25] << 8) |
+ (syndrome[26] << 16) | (syndrome[27] << 24);
+ writel(val, ptr);
+ }
+}
+
+/**
+ * elm_check_errors - Check for BCH errors and return error locations
+ * @syndrome: BCH syndrome
+ * @nibbles:
+ * @error_count: Returns number of errrors in the syndrome
+ * @error_locations: Returns error locations (in decimal) in this array
+ *
+ * Check the provided syndrome for BCH errors and return error count
+ * and locations in the array passed. Returns -1 if error is not correctable,
+ * else returns 0
+ */
+int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count,
+ u32 *error_locations)
+{
+ u8 poly = ELM_DEFAULT_POLY;
+ s8 i;
+ u32 location_status;
+
+ elm_load_syndromes(syndrome, nibbles, poly);
+
+ /* start processing */
+ writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6])
+ | ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID),
+ &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]);
+
+ /* wait for processing to complete */
+ while ((readl(&elm_cfg->irqstatus) & (0x1 << poly)) != 0x1)
+ ;
+ /* clear status */
+ writel((readl(&elm_cfg->irqstatus) | (0x1 << poly)),
+ &elm_cfg->irqstatus);
+
+ /* check if correctable */
+ location_status = readl(&elm_cfg->error_location[poly].location_status);
+ if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK))
+ return -1;
+
+ /* get error count */
+ *error_count = readl(&elm_cfg->error_location[poly].location_status) &
+ ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK;
+
+ for (i = 0; i < *error_count; i++) {
+ error_locations[i] =
+ readl(&elm_cfg->error_location[poly].error_location_x[i]);
+ }
+
+ return 0;
+}
+
+
+/**
+ * elm_config - Configure ELM module
+ * @level: 4 / 8 / 16 bit BCH
+ *
+ * Configure ELM module based on BCH level.
+ * Set mode as continuous mode.
+ * Currently we are using only syndrome 0 and syndromes 1 to 6 are not used.
+ * Also, the mode is set only for syndrome 0
+ */
+int elm_config(enum bch_level level)
+{
+ u32 val;
+ u8 poly = ELM_DEFAULT_POLY;
+ u32 buffer_size = 0x7FF;
+
+ /* config size and level */
+ val = (u32)(level) & ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK;
+ val |= ((buffer_size << ELM_LOCATION_CONFIG_ECC_SIZE_POS) &
+ ELM_LOCATION_CONFIG_ECC_SIZE_MASK);
+ writel(val, &elm_cfg->location_config);
+
+ /* config continous mode */
+ /* enable interrupt generation for syndrome polynomial set */
+ writel((readl(&elm_cfg->irqenable) | (0x1 << poly)),
+ &elm_cfg->irqenable);
+ /* set continuous mode for the syndrome polynomial set */
+ writel((readl(&elm_cfg->page_ctrl) & ~(0x1 << poly)),
+ &elm_cfg->page_ctrl);
+
+ return 0;
+}
+
+/**
+ * elm_reset - Do a soft reset of ELM
+ *
+ * Perform a soft reset of ELM and return after reset is done.
+ */
+void elm_reset(void)
+{
+ /* initiate reset */
+ writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET),
+ &elm_cfg->sysconfig);
+
+ /* wait for reset complete and normal operation */
+ while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) !=
+ ELM_SYSSTATUS_RESETDONE)
+ ;
+}
+
+/**
+ * elm_init - Initialize ELM module
+ *
+ * Initialize ELM support. Currently it does only base address init
+ * and ELM reset.
+ */
+void elm_init(void)
+{
+ elm_cfg = (struct elm *)ELM_BASE;
+ elm_reset();
+}
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index ec1787f..5e7e6b3 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -15,15 +15,13 @@
#include <linux/bch.h>
#include <linux/compiler.h>
#include <nand.h>
-#ifdef CONFIG_AM33XX
-#include <asm/arch/elm.h>
-#endif
+#include <asm/omap_elm.h>
+
+#define BADBLOCK_MARKER_LENGTH 2
+#define SECTOR_BYTES 512
static uint8_t cs;
-static __maybe_unused struct nand_ecclayout hw_nand_oob =
- GPMC_NAND_HW_ECC_LAYOUT;
-static __maybe_unused struct nand_ecclayout hw_bch8_nand_oob =
- GPMC_NAND_HW_BCH8_ECC_LAYOUT;
+static __maybe_unused struct nand_ecclayout omap_ecclayout;
/*
* omap_nand_hwcontrol - Set the address pointers corretly for the
@@ -233,6 +231,7 @@ struct nand_bch_priv {
uint8_t type;
uint8_t nibbles;
struct bch_control *control;
+ enum omap_ecc ecc_scheme;
};
/* bch types */
@@ -274,17 +273,15 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode)
{
uint32_t val;
uint32_t dev_width = (chip->options & NAND_BUSWIDTH_16) >> 1;
-#ifdef CONFIG_AM33XX
uint32_t unused_length = 0;
-#endif
uint32_t wr_mode = BCH_WRAPMODE_6;
struct nand_bch_priv *bch = chip->priv;
/* Clear the ecc result registers, select ecc reg as 1 */
writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control);
-#ifdef CONFIG_AM33XX
- wr_mode = BCH_WRAPMODE_1;
+ if (bch->ecc_scheme == OMAP_ECC_BCH8_CODE_HW) {
+ wr_mode = BCH_WRAPMODE_1;
switch (bch->nibbles) {
case ECC_BCH4_NIBBLES:
@@ -320,7 +317,7 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode)
val |= (unused_length << 22);
break;
}
-#else
+ } else {
/*
* This ecc_size_config setting is for BCH sw library.
*
@@ -333,7 +330,7 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode)
* size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
*/
val = (32 << 22) | (0 << 12);
-#endif
+ }
/* ecc size configuration */
writel(val, &gpmc_cfg->ecc_size_config);
@@ -376,9 +373,9 @@ static void __maybe_unused omap_ecc_disable(struct mtd_info *mtd)
}
/*
- * BCH8 support (needs ELM and thus AM33xx-only)
+ * BCH support using ELM module
*/
-#ifdef CONFIG_AM33XX
+#ifdef CONFIG_NAND_OMAP_ELM
/*
* omap_read_bch8_result - Read BCH result for BCH8 level
*
@@ -631,20 +628,20 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
}
return 0;
}
-#endif /* CONFIG_AM33XX */
+#endif /* CONFIG_NAND_OMAP_ELM */
/*
* OMAP3 BCH8 support (with BCH library)
*/
-#ifdef CONFIG_NAND_OMAP_BCH8
+#ifdef CONFIG_BCH
/*
- * omap_calculate_ecc_bch - Read BCH ECC result
+ * omap_calculate_ecc_bch_sw - Read BCH ECC result
*
* @mtd: MTD device structure
* @dat: The pointer to data on which ecc is computed (unused here)
* @ecc: The ECC output buffer
*/
-static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat,
+static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd, const uint8_t *dat,
uint8_t *ecc)
{
int ret = 0;
@@ -689,13 +686,13 @@ static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat,
}
/**
- * omap_correct_data_bch - Decode received data and correct errors
+ * omap_correct_data_bch_sw - Decode received data and correct errors
* @mtd: MTD device structure
* @data: page data
* @read_ecc: ecc read from nand flash
* @calc_ecc: ecc read from HW ECC registers
*/
-static int omap_correct_data_bch(struct mtd_info *mtd, u_char *data,
+static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data,
u_char *read_ecc, u_char *calc_ecc)
{
int i, count;
@@ -752,7 +749,150 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
chip_priv->control = NULL;
}
}
-#endif /* CONFIG_NAND_OMAP_BCH8 */
+#endif /* CONFIG_BCH */
+
+/**
+ * omap_select_ecc_scheme - configures driver for particular ecc-scheme
+ * @nand: NAND chip device structure
+ * @ecc_scheme: ecc scheme to configure
+ * @pagesize: number of main-area bytes per page of NAND device
+ * @oobsize: number of OOB/spare bytes per page of NAND device
+ */
+static int omap_select_ecc_scheme(struct nand_chip *nand,
+ enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) {
+ struct nand_bch_priv *bch = nand->priv;
+ struct nand_ecclayout *ecclayout = nand->ecc.layout;
+ int eccsteps = pagesize / SECTOR_BYTES;
+ int i;
+
+ switch (ecc_scheme) {
+ case OMAP_ECC_HAM1_CODE_SW:
+ debug("nand: selected OMAP_ECC_HAM1_CODE_SW\n");
+ /* For this ecc-scheme, ecc.bytes, ecc.layout, ... are
+ * initialized in nand_scan_tail(), so just set ecc.mode */
+ bch_priv.control = NULL;
+ bch_priv.type = 0;
+ nand->ecc.mode = NAND_ECC_SOFT;
+ nand->ecc.layout = NULL;
+ nand->ecc.size = pagesize;
+ bch->ecc_scheme = OMAP_ECC_HAM1_CODE_SW;
+ break;
+
+ case OMAP_ECC_HAM1_CODE_HW:
+ debug("nand: selected OMAP_ECC_HAM1_CODE_HW\n");
+ /* check ecc-scheme requirements before updating ecc info */
+ if ((3 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+ printf("nand: error: insufficient OOB: require=%d\n", (
+ (3 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+ return -EINVAL;
+ }
+ bch_priv.control = NULL;
+ bch_priv.type = 0;
+ /* populate ecc specific fields */
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.strength = 1;
+ nand->ecc.size = SECTOR_BYTES;
+ nand->ecc.bytes = 3;
+ nand->ecc.hwctl = omap_enable_hwecc;
+ nand->ecc.correct = omap_correct_data;
+ nand->ecc.calculate = omap_calculate_ecc;
+ /* define ecc-layout */
+ ecclayout->eccbytes = nand->ecc.bytes * eccsteps;
+ for (i = 0; i < ecclayout->eccbytes; i++)
+ ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
+ BADBLOCK_MARKER_LENGTH;
+ bch->ecc_scheme = OMAP_ECC_HAM1_CODE_HW;
+ break;
+
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+#ifdef CONFIG_BCH
+ debug("nand: selected OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
+ /* check ecc-scheme requirements before updating ecc info */
+ if ((13 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+ printf("nand: error: insufficient OOB: require=%d\n", (
+ (13 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+ return -EINVAL;
+ }
+ /* check if BCH S/W library can be used for error detection */
+ bch_priv.control = init_bch(13, 8, 0x201b);
+ if (!bch_priv.control) {
+ printf("nand: error: could not init_bch()\n");
+ return -ENODEV;
+ }
+ bch_priv.type = ECC_BCH8;
+ /* populate ecc specific fields */
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.strength = 8;
+ nand->ecc.size = SECTOR_BYTES;
+ nand->ecc.bytes = 13;
+ nand->ecc.hwctl = omap_enable_ecc_bch;
+ nand->ecc.correct = omap_correct_data_bch_sw;
+ nand->ecc.calculate = omap_calculate_ecc_bch_sw;
+ /* define ecc-layout */
+ ecclayout->eccbytes = nand->ecc.bytes * eccsteps;
+ ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH;
+ for (i = 1; i < ecclayout->eccbytes; i++) {
+ if (i % nand->ecc.bytes)
+ ecclayout->eccpos[i] =
+ ecclayout->eccpos[i - 1] + 1;
+ else
+ ecclayout->eccpos[i] =
+ ecclayout->eccpos[i - 1] + 2;
+ }
+ ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
+ BADBLOCK_MARKER_LENGTH;
+ omap_hwecc_init_bch(nand, NAND_ECC_READ);
+ bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+ break;
+#else
+ printf("nand: error: CONFIG_BCH required for ECC\n");
+ return -EINVAL;
+#endif
+
+ case OMAP_ECC_BCH8_CODE_HW:
+#ifdef CONFIG_NAND_OMAP_ELM
+ debug("nand: selected OMAP_ECC_BCH8_CODE_HW\n");
+ /* check ecc-scheme requirements before updating ecc info */
+ if ((14 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+ printf("nand: error: insufficient OOB: require=%d\n", (
+ (14 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+ return -EINVAL;
+ }
+ /* intialize ELM for ECC error detection */
+ elm_init();
+ bch_priv.type = ECC_BCH8;
+ /* populate ecc specific fields */
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.strength = 8;
+ nand->ecc.size = SECTOR_BYTES;
+ nand->ecc.bytes = 14;
+ nand->ecc.hwctl = omap_enable_ecc_bch;
+ nand->ecc.correct = omap_correct_data_bch;
+ nand->ecc.calculate = omap_calculate_ecc_bch;
+ nand->ecc.read_page = omap_read_page_bch;
+ /* define ecc-layout */
+ ecclayout->eccbytes = nand->ecc.bytes * eccsteps;
+ for (i = 0; i < ecclayout->eccbytes; i++)
+ ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
+ BADBLOCK_MARKER_LENGTH;
+ bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW;
+ break;
+#else
+ printf("nand: error: CONFIG_NAND_OMAP_ELM required for ECC\n");
+ return -EINVAL;
+#endif
+
+ default:
+ debug("nand: error: ecc scheme not enabled or supported\n");
+ return -EINVAL;
+ }
+ return 0;
+}
#ifndef CONFIG_SPL_BUILD
/*
@@ -763,77 +903,45 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
* @eccstrength - the number of bits that could be corrected
* (1 - hamming, 4 - BCH4, 8 - BCH8, 16 - BCH16)
*/
-void omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength)
+int __maybe_unused omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength)
{
struct nand_chip *nand;
struct mtd_info *mtd;
+ int err = 0;
if (nand_curr_device < 0 ||
nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
!nand_info[nand_curr_device].name) {
- printf("Error: Can't switch ecc, no devices available\n");
- return;
+ printf("nand: error: no NAND devices found\n");
+ return -ENODEV;
}
mtd = &nand_info[nand_curr_device];
nand = mtd->priv;
-
nand->options |= NAND_OWN_BUFFERS;
-
- /* Reset ecc interface */
- nand->ecc.mode = NAND_ECC_NONE;
- nand->ecc.read_page = NULL;
- nand->ecc.write_page = NULL;
- nand->ecc.read_oob = NULL;
- nand->ecc.write_oob = NULL;
- nand->ecc.hwctl = NULL;
- nand->ecc.correct = NULL;
- nand->ecc.calculate = NULL;
- nand->ecc.strength = eccstrength;
-
/* Setup the ecc configurations again */
if (hardware) {
if (eccstrength == 1) {
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.layout = &hw_nand_oob;
- nand->ecc.size = 512;
- nand->ecc.bytes = 3;
- nand->ecc.hwctl = omap_enable_hwecc;
- nand->ecc.correct = omap_correct_data;
- nand->ecc.calculate = omap_calculate_ecc;
- omap_hwecc_init(nand);
- printf("1-bit hamming HW ECC selected\n");
- }
-#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8)
- else if (eccstrength == 8) {
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.layout = &hw_bch8_nand_oob;
- nand->ecc.size = 512;
-#ifdef CONFIG_AM33XX
- nand->ecc.bytes = 14;
- nand->ecc.read_page = omap_read_page_bch;
-#else
- nand->ecc.bytes = 13;
-#endif
- nand->ecc.hwctl = omap_enable_ecc_bch;
- nand->ecc.correct = omap_correct_data_bch;
- nand->ecc.calculate = omap_calculate_ecc_bch;
- omap_hwecc_init_bch(nand, NAND_ECC_READ);
- printf("8-bit BCH HW ECC selected\n");
+ err = omap_select_ecc_scheme(nand,
+ OMAP_ECC_HAM1_CODE_HW,
+ mtd->writesize, mtd->oobsize);
+ } else if (eccstrength == 8) {
+ err = omap_select_ecc_scheme(nand,
+ OMAP_ECC_BCH8_CODE_HW,
+ mtd->writesize, mtd->oobsize);
+ } else {
+ printf("nand: error: unsupported ECC scheme\n");
+ return -EINVAL;
}
-#endif
} else {
- nand->ecc.mode = NAND_ECC_SOFT;
- /* Use mtd default settings */
- nand->ecc.layout = NULL;
- nand->ecc.size = 0;
- printf("SW ECC selected\n");
+ err = omap_select_ecc_scheme(nand, OMAP_ECC_HAM1_CODE_SW,
+ mtd->writesize, mtd->oobsize);
}
/* Update NAND handling after ECC mode switch */
- nand_scan_tail(mtd);
-
- nand->options &= ~NAND_OWN_BUFFERS;
+ if (!err)
+ err = nand_scan_tail(mtd);
+ return err;
}
#endif /* CONFIG_SPL_BUILD */
@@ -856,7 +964,7 @@ int board_nand_init(struct nand_chip *nand)
{
int32_t gpmc_config = 0;
cs = 0;
-
+ int err = 0;
/*
* xloader/Uboot's gpmc configuration would have configured GPMC for
* nand type of memory. The following logic scans and latches on to the
@@ -873,7 +981,7 @@ int board_nand_init(struct nand_chip *nand)
cs++;
}
if (cs >= GPMC_MAX_CS) {
- printf("NAND: Unable to find NAND settings in "
+ printf("nand: error: Unable to find NAND settings in "
"GPMC Configuration - quitting\n");
return -ENODEV;
}
@@ -885,64 +993,27 @@ int board_nand_init(struct nand_chip *nand)
nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat;
nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd;
-
- nand->cmd_ctrl = omap_nand_hwcontrol;
- nand->options = NAND_NO_PADDING | NAND_CACHEPRG;
+ nand->priv = &bch_priv;
+ nand->cmd_ctrl = omap_nand_hwcontrol;
+ nand->options |= NAND_NO_PADDING | NAND_CACHEPRG;
/* If we are 16 bit dev, our gpmc config tells us that */
if ((readl(&gpmc_cfg->cs[cs].config1) & 0x3000) == 0x1000)
nand->options |= NAND_BUSWIDTH_16;
nand->chip_delay = 100;
+ nand->ecc.layout = &omap_ecclayout;
-#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8)
-#ifdef CONFIG_AM33XX
- /* AM33xx uses the ELM */
- /* required in case of BCH */
- elm_init();
-#else
- /*
- * Whereas other OMAP based SoC do not have the ELM, they use the BCH
- * SW library.
- */
- bch_priv.control = init_bch(13, 8, 0x201b /* hw polynominal */);
- if (!bch_priv.control) {
- puts("Could not init_bch()\n");
- return -ENODEV;
- }
-#endif
- /* BCH info that will be correct for SPL or overridden otherwise. */
- nand->priv = &bch_priv;
-#endif
-
- /* Default ECC mode */
-#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8)
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.layout = &hw_bch8_nand_oob;
- nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
- nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
- nand->ecc.strength = 8;
- nand->ecc.hwctl = omap_enable_ecc_bch;
- nand->ecc.correct = omap_correct_data_bch;
- nand->ecc.calculate = omap_calculate_ecc_bch;
-#ifdef CONFIG_AM33XX
- nand->ecc.read_page = omap_read_page_bch;
-#endif
- omap_hwecc_init_bch(nand, NAND_ECC_READ);
-#else
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_NAND_SOFTECC)
- nand->ecc.mode = NAND_ECC_SOFT;
+ /* select ECC scheme */
+#if defined(CONFIG_NAND_OMAP_ECCSCHEME)
+ err = omap_select_ecc_scheme(nand, CONFIG_NAND_OMAP_ECCSCHEME,
+ CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE);
#else
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.layout = &hw_nand_oob;
- nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
- nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
- nand->ecc.hwctl = omap_enable_hwecc;
- nand->ecc.correct = omap_correct_data;
- nand->ecc.calculate = omap_calculate_ecc;
- nand->ecc.strength = 1;
- omap_hwecc_init(nand);
-#endif
+ /* pagesize and oobsize are not required to configure sw ecc-scheme */
+ err = omap_select_ecc_scheme(nand, OMAP_ECC_HAM1_CODE_SW,
+ 0, 0);
#endif
+ if (err)
+ return err;
#ifdef CONFIG_SPL_BUILD
if (nand->options & NAND_BUSWIDTH_16)