summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
authorScott Wood <scottwood@freescale.com>2010-08-25 17:42:49 -0500
committerScott Wood <scottwood@freescale.com>2010-10-11 15:10:35 -0500
commit5b8e6bb517ea4f6d8ba9fa11c84e0373bc7ead2c (patch)
tree7163fa332c56e404374cffa5723db3a8cd8de289 /drivers/mtd/nand
parent8c5659a6daa2a3af75ec762d25f40dd053bed26f (diff)
downloadu-boot-imx-5b8e6bb517ea4f6d8ba9fa11c84e0373bc7ead2c.zip
u-boot-imx-5b8e6bb517ea4f6d8ba9fa11c84e0373bc7ead2c.tar.gz
u-boot-imx-5b8e6bb517ea4f6d8ba9fa11c84e0373bc7ead2c.tar.bz2
nand: remove dead code and suspend/resume
Get rid of the several "#if 0" sections that were keeping around Linux code that isn't relevant to U-Boot. Besides cluttering the code, these sections make tracking upstream changes harder, rather than easier. It's easy to discard obviously irrelevant diff hunks that patch rejects, but it's not as easy to notice hunks that apply cleanly to the #if 0 section, but *are* relevant to U-Boot and require modification elsewhere. Also remove suspend/resume, as this is not applicable to U-Boot. Removal saves 232 bytes on powerpc. Signed-off-by: Scott Wood <scottwood@freescale.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/nand_base.c238
-rw-r--r--drivers/mtd/nand/nand_bbt.c19
-rw-r--r--drivers/mtd/nand/nand_ecc.c17
-rw-r--r--drivers/mtd/nand/nand_util.c35
4 files changed, 1 insertions, 308 deletions
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 276dbfd..21cc5a3 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -32,30 +32,6 @@
*
*/
-/* XXX U-BOOT XXX */
-#if 0
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/compatmac.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/leds.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-
-#endif
-
#include <common.h>
#define ENOTSUPP 524 /* Operation is not supported */
@@ -75,10 +51,6 @@
#include <asm/io.h>
#include <asm/errno.h>
-#ifdef CONFIG_JFFS2_NAND
-#include <jffs2/jffs2.h>
-#endif
-
/*
* CONFIG_SYS_NAND_RESET_CNT is used as a timeout mechanism when resetting
* a flash. NAND flash is initialized prior to interrupts so standard timers
@@ -143,44 +115,17 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
static int nand_wait(struct mtd_info *mtd, struct nand_chip *this);
-/*
- * For devices which display every fart in the system on a separate LED. Is
- * compiled away when LED support is disabled.
- */
-/* XXX U-BOOT XXX */
-#if 0
-DEFINE_LED_TRIGGER(nand_led_trigger);
-#endif
-
/**
* nand_release_device - [GENERIC] release chip
* @mtd: MTD device structure
*
* Deselect, release chip lock and wake up anyone waiting on the device
*/
-/* XXX U-BOOT XXX */
-#if 0
-static void nand_release_device(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- /* De-select the NAND device */
- chip->select_chip(mtd, -1);
-
- /* Release the controller and the chip */
- spin_lock(&chip->controller->lock);
- chip->controller->active = NULL;
- chip->state = FL_READY;
- wake_up(&chip->controller->wq);
- spin_unlock(&chip->controller->lock);
-}
-#else
static void nand_release_device (struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
this->select_chip(mtd, -1); /* De-select the NAND device */
}
-#endif
/**
* nand_read_byte - [DEFAULT] read one byte from the chip
@@ -490,24 +435,6 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
* Wait for the ready pin, after a command
* The timeout is catched later.
*/
-/* XXX U-BOOT XXX */
-#if 0
-void nand_wait_ready(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
- unsigned long timeo = jiffies + 2;
-
- led_trigger_event(nand_led_trigger, LED_FULL);
- /* wait until command is processed or timeout occures */
- do {
- if (chip->dev_ready(mtd))
- break;
- touch_softlockup_watchdog();
- } while (time_before(jiffies, timeo));
- led_trigger_event(nand_led_trigger, LED_OFF);
-}
-EXPORT_SYMBOL_GPL(nand_wait_ready);
-#else
void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
@@ -522,7 +449,6 @@ void nand_wait_ready(struct mtd_info *mtd)
break;
}
}
-#endif
/**
* nand_command - [DEFAULT] Send command to NAND device
@@ -759,45 +685,11 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
*
* Get the device and lock it for exclusive access
*/
-/* XXX U-BOOT XXX */
-#if 0
-static int
-nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
-{
- spinlock_t *lock = &chip->controller->lock;
- wait_queue_head_t *wq = &chip->controller->wq;
- DECLARE_WAITQUEUE(wait, current);
- retry:
- spin_lock(lock);
-
- /* Hardware controller shared among independend devices */
- /* Hardware controller shared among independend devices */
- if (!chip->controller->active)
- chip->controller->active = chip;
-
- if (chip->controller->active == chip && chip->state == FL_READY) {
- chip->state = new_state;
- spin_unlock(lock);
- return 0;
- }
- if (new_state == FL_PM_SUSPENDED) {
- spin_unlock(lock);
- return (chip->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN;
- }
- set_current_state(TASK_UNINTERRUPTIBLE);
- add_wait_queue(wq, &wait);
- spin_unlock(lock);
- schedule();
- remove_wait_queue(wq, &wait);
- goto retry;
-}
-#else
static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state)
{
this->state = new_state;
return 0;
}
-#endif
/**
* nand_wait - [DEFAULT] wait until the command is done
@@ -808,46 +700,6 @@ static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int ne
* Erase can take up to 400ms and program up to 20ms according to
* general NAND and SmartMedia specs
*/
-/* XXX U-BOOT XXX */
-#if 0
-static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
-{
-
- unsigned long timeo = jiffies;
- int status, state = chip->state;
-
- if (state == FL_ERASING)
- timeo += (HZ * 400) / 1000;
- else
- timeo += (HZ * 20) / 1000;
-
- led_trigger_event(nand_led_trigger, LED_FULL);
-
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
- ndelay(100);
-
- if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
- chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
- else
- chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-
- while (time_before(jiffies, timeo)) {
- if (chip->dev_ready) {
- if (chip->dev_ready(mtd))
- break;
- } else {
- if (chip->read_byte(mtd) & NAND_STATUS_READY)
- break;
- }
- cond_resched();
- }
- led_trigger_event(nand_led_trigger, LED_OFF);
-
- status = (int)chip->read_byte(mtd);
- return status;
-}
-#else
static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
{
unsigned long timeo;
@@ -886,7 +738,6 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
return this->read_byte(mtd);
}
-#endif
/**
* nand_read_page_raw - [Intern] read raw page data without ecc
@@ -2516,32 +2367,6 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
return chip->block_markbad(mtd, ofs);
}
-/**
- * nand_suspend - [MTD Interface] Suspend the NAND flash
- * @mtd: MTD device structure
- */
-static int nand_suspend(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- return nand_get_device(chip, mtd, FL_PM_SUSPENDED);
-}
-
-/**
- * nand_resume - [MTD Interface] Resume the NAND flash
- * @mtd: MTD device structure
- */
-static void nand_resume(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (chip->state == FL_PM_SUSPENDED)
- nand_release_device(mtd);
- else
- printk(KERN_ERR "nand_resume() called for a chip which is not "
- "in suspended state\n");
-}
-
/*
* Set default functions
*/
@@ -2577,17 +2402,8 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
if (!chip->scan_bbt)
chip->scan_bbt = nand_default_bbt;
-
- if (!chip->controller) {
+ if (!chip->controller)
chip->controller = &chip->hwcontrol;
-
- /* XXX U-BOOT XXX */
-#if 0
- spin_lock_init(&chip->controller->lock);
- init_waitqueue_head(&chip->controller->wq);
-#endif
- }
-
}
/*
@@ -3021,8 +2837,6 @@ int nand_scan_tail(struct mtd_info *mtd)
mtd->sync = nand_sync;
mtd->lock = NULL;
mtd->unlock = NULL;
- mtd->suspend = nand_suspend;
- mtd->resume = nand_resume;
mtd->block_isbad = nand_block_isbad;
mtd->block_markbad = nand_block_markbad;
@@ -3036,16 +2850,6 @@ int nand_scan_tail(struct mtd_info *mtd)
return 0;
}
-/* module_text_address() isn't exported, and it's mostly a pointless
- test if this is a module _anyway_ -- they'd have to try _really_ hard
- to call us from in-kernel code if the core NAND support is modular. */
-#ifdef MODULE
-#define caller_is_module() (1)
-#else
-#define caller_is_module() \
- module_text_address((unsigned long)__builtin_return_address(0))
-#endif
-
/**
* nand_scan - [NAND Interface] Scan for the NAND device
* @mtd: MTD device structure
@@ -3062,15 +2866,6 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
{
int ret;
- /* Many callers got this wrong, so check for it for a while... */
- /* XXX U-BOOT XXX */
-#if 0
- if (!mtd->owner && caller_is_module()) {
- printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n");
- BUG();
- }
-#endif
-
ret = nand_scan_ident(mtd, maxchips);
if (!ret)
ret = nand_scan_tail(mtd);
@@ -3089,40 +2884,9 @@ void nand_release(struct mtd_info *mtd)
/* Deregister partitions */
del_mtd_partitions(mtd);
#endif
- /* Deregister the device */
- /* XXX U-BOOT XXX */
-#if 0
- del_mtd_device(mtd);
-#endif
/* Free bad block table memory */
kfree(chip->bbt);
if (!(chip->options & NAND_OWN_BUFFERS))
kfree(chip->buffers);
}
-
-/* XXX U-BOOT XXX */
-#if 0
-EXPORT_SYMBOL_GPL(nand_scan);
-EXPORT_SYMBOL_GPL(nand_scan_ident);
-EXPORT_SYMBOL_GPL(nand_scan_tail);
-EXPORT_SYMBOL_GPL(nand_release);
-
-static int __init nand_base_init(void)
-{
- led_trigger_register_simple("nand-disk", &nand_led_trigger);
- return 0;
-}
-
-static void __exit nand_base_exit(void)
-{
- led_trigger_unregister_simple(nand_led_trigger);
-}
-
-module_init(nand_base_init);
-module_exit(nand_base_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
-MODULE_DESCRIPTION("Generic NAND flash driver code");
-#endif
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 2fe68ab..521ddde 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -58,19 +58,6 @@
#include <asm/errno.h>
-/* XXX U-BOOT XXX */
-#if 0
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/compatmac.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/vmalloc.h>
-#endif
-
/**
* check_pattern - [GENERIC] check if a pattern is in the buffer
* @buf: the buffer to search
@@ -1231,9 +1218,3 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
}
return 1;
}
-
-/* XXX U-BOOT XXX */
-#if 0
-EXPORT_SYMBOL(nand_scan_bbt);
-EXPORT_SYMBOL(nand_default_bbt);
-#endif
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 463f9cb..52bc916 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -37,14 +37,6 @@
#include <common.h>
-/* XXX U-BOOT XXX */
-#if 0
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mtd/nand_ecc.h>
-#endif
-
#include <asm/errno.h>
#include <linux/mtd/mtd.h>
@@ -140,10 +132,6 @@ int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
return 0;
}
-/* XXX U-BOOT XXX */
-#if 0
-EXPORT_SYMBOL(nand_calculate_ecc);
-#endif
#endif /* CONFIG_NAND_SPL */
static inline int countbits(uint32_t byte)
@@ -212,8 +200,3 @@ int nand_correct_data(struct mtd_info *mtd, u_char *dat,
return -EBADMSG;
}
-
-/* XXX U-BOOT XXX */
-#if 0
-EXPORT_SYMBOL(nand_correct_data);
-#endif
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 6a5dd37..22c7411 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -211,41 +211,6 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
return 0;
}
-/* XXX U-BOOT XXX */
-#if 0
-
-#define MAX_PAGE_SIZE 2048
-#define MAX_OOB_SIZE 64
-
-/*
- * buffer array used for writing data
- */
-static unsigned char data_buf[MAX_PAGE_SIZE];
-static unsigned char oob_buf[MAX_OOB_SIZE];
-
-/* OOB layouts to pass into the kernel as default */
-static struct nand_ecclayout none_ecclayout = {
- .useecc = MTD_NANDECC_OFF,
-};
-
-static struct nand_ecclayout jffs2_ecclayout = {
- .useecc = MTD_NANDECC_PLACE,
- .eccbytes = 6,
- .eccpos = { 0, 1, 2, 3, 6, 7 }
-};
-
-static struct nand_ecclayout yaffs_ecclayout = {
- .useecc = MTD_NANDECC_PLACE,
- .eccbytes = 6,
- .eccpos = { 8, 9, 10, 13, 14, 15}
-};
-
-static struct nand_ecclayout autoplace_ecclayout = {
- .useecc = MTD_NANDECC_AUTOPLACE
-};
-#endif
-
-/* XXX U-BOOT XXX */
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
/******************************************************************************