diff options
author | Chris Packham <judge.packham@gmail.com> | 2016-05-13 15:19:31 +1200 |
---|---|---|
committer | Heiko Schocher <hs@denx.de> | 2016-05-17 08:32:02 +0200 |
commit | d6b7757e41d22e08f21f58d3fe9183a150582f61 (patch) | |
tree | b476033fedb3cdd1be2b8facfa49b189ead172b3 /drivers/i2c/mvtwsi.c | |
parent | 3a3705280d1d06e4d9a62fbe895dbe03939ad00e (diff) | |
download | u-boot-imx-d6b7757e41d22e08f21f58d3fe9183a150582f61.zip u-boot-imx-d6b7757e41d22e08f21f58d3fe9183a150582f61.tar.gz u-boot-imx-d6b7757e41d22e08f21f58d3fe9183a150582f61.tar.bz2 |
i2c: mvtwsi: Eliminate twsi_control_flags
In a system where the initial u-boot location is genuinely NOR flash (as
opposed to RAM or a cache-line setup by a pre-bootloader) writes to the
data section are problematic. At best these writes have no effect, at
worst they put the flash memory into a status mode which changes the
executable code underneath us.
Pass around a stack variable from the top of the twsi i2c driver to
avoid writing to global data.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Diffstat (limited to 'drivers/i2c/mvtwsi.c')
-rw-r--r-- | drivers/i2c/mvtwsi.c | 62 |
1 files changed, 29 insertions, 33 deletions
diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c index 221ff4f..bf44432 100644 --- a/drivers/i2c/mvtwsi.c +++ b/drivers/i2c/mvtwsi.c @@ -185,26 +185,17 @@ static int twsi_wait(struct i2c_adapter *adap, int expected_status) } /* - * These flags are ORed to any write to the control register - * They allow global setting of TWSIEN and ACK. - * By default none are set. - * twsi_start() sets TWSIEN (in case the controller was disabled) - * twsi_recv() sets ACK or resets it depending on expected status. - */ -static u8 twsi_control_flags = MVTWSI_CONTROL_TWSIEN; - -/* * Assert the START condition, either in a single I2C transaction * or inside back-to-back ones (repeated starts). */ -static int twsi_start(struct i2c_adapter *adap, int expected_status) +static int twsi_start(struct i2c_adapter *adap, int expected_status, u8 *flags) { struct mvtwsi_registers *twsi = twsi_get_base(adap); /* globally set TWSIEN in case it was not */ - twsi_control_flags |= MVTWSI_CONTROL_TWSIEN; + *flags |= MVTWSI_CONTROL_TWSIEN; /* assert START */ - writel(twsi_control_flags | MVTWSI_CONTROL_START | + writel(*flags | MVTWSI_CONTROL_START | MVTWSI_CONTROL_CLEAR_IFLG, &twsi->control); /* wait for controller to process START */ return twsi_wait(adap, expected_status); @@ -213,14 +204,15 @@ static int twsi_start(struct i2c_adapter *adap, int expected_status) /* * Send a byte (i2c address or data). */ -static int twsi_send(struct i2c_adapter *adap, u8 byte, int expected_status) +static int twsi_send(struct i2c_adapter *adap, u8 byte, int expected_status, + u8 *flags) { struct mvtwsi_registers *twsi = twsi_get_base(adap); /* put byte in data register for sending */ writel(byte, &twsi->data); /* clear any pending interrupt -- that'll cause sending */ - writel(twsi_control_flags | MVTWSI_CONTROL_CLEAR_IFLG, &twsi->control); + writel(*flags | MVTWSI_CONTROL_CLEAR_IFLG, &twsi->control); /* wait for controller to receive byte and check ACK */ return twsi_wait(adap, expected_status); } @@ -229,18 +221,18 @@ static int twsi_send(struct i2c_adapter *adap, u8 byte, int expected_status) * Receive a byte. * Global mvtwsi_control_flags variable says if we should ack or nak. */ -static int twsi_recv(struct i2c_adapter *adap, u8 *byte) +static int twsi_recv(struct i2c_adapter *adap, u8 *byte, u8 *flags) { struct mvtwsi_registers *twsi = twsi_get_base(adap); int expected_status, status; /* compute expected status based on ACK bit in global control flags */ - if (twsi_control_flags & MVTWSI_CONTROL_ACK) + if (*flags & MVTWSI_CONTROL_ACK) expected_status = MVTWSI_STATUS_DATA_R_ACK; else expected_status = MVTWSI_STATUS_DATA_R_NAK; /* acknowledge *previous state* and launch receive */ - writel(twsi_control_flags | MVTWSI_CONTROL_CLEAR_IFLG, &twsi->control); + writel(*flags | MVTWSI_CONTROL_CLEAR_IFLG, &twsi->control); /* wait for controller to receive byte and assert ACK or NAK */ status = twsi_wait(adap, expected_status); /* if we did receive expected byte then store it */ @@ -296,8 +288,7 @@ static unsigned int twsi_calc_freq(const int n, const int m) static void twsi_reset(struct i2c_adapter *adap) { struct mvtwsi_registers *twsi = twsi_get_base(adap); - /* ensure controller will be enabled by any twsi*() function */ - twsi_control_flags = MVTWSI_CONTROL_TWSIEN; + /* reset controller */ writel(0, &twsi->soft_reset); /* wait 2 ms -- this is what the Marvell LSP does */ @@ -353,7 +344,7 @@ static void twsi_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) * Expected address status will derive from direction bit (bit 0) in addr. */ static int i2c_begin(struct i2c_adapter *adap, int expected_start_status, - u8 addr) + u8 addr, u8 *flags) { int status, expected_addr_status; @@ -363,10 +354,11 @@ static int i2c_begin(struct i2c_adapter *adap, int expected_start_status, else /* writing */ expected_addr_status = MVTWSI_STATUS_ADDR_W_ACK; /* assert START */ - status = twsi_start(adap, expected_start_status); + status = twsi_start(adap, expected_start_status, flags); /* send out the address if the start went well */ if (status == 0) - status = twsi_send(adap, addr, expected_addr_status); + status = twsi_send(adap, addr, expected_addr_status, + flags); /* return ok or status of first failure to caller */ return status; } @@ -378,13 +370,14 @@ static int i2c_begin(struct i2c_adapter *adap, int expected_start_status, static int twsi_i2c_probe(struct i2c_adapter *adap, uchar chip) { u8 dummy_byte; + u8 flags = 0; int status; /* begin i2c read */ - status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1) | 1); + status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1) | 1, &flags); /* dummy read was accepted: receive byte but NAK it. */ if (status == 0) - status = twsi_recv(adap, &dummy_byte); + status = twsi_recv(adap, &dummy_byte, &flags); /* Stop transaction */ twsi_stop(adap, 0); /* return 0 or status of first failure */ @@ -405,27 +398,28 @@ static int twsi_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, int alen, uchar *data, int length) { int status; + u8 flags = 0; /* begin i2c write to send the address bytes */ - status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1)); + status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1), &flags); /* send addr bytes */ while ((status == 0) && alen--) status = twsi_send(adap, addr >> (8*alen), - MVTWSI_STATUS_DATA_W_ACK); + MVTWSI_STATUS_DATA_W_ACK, &flags); /* begin i2c read to receive eeprom data bytes */ if (status == 0) status = i2c_begin(adap, MVTWSI_STATUS_REPEATED_START, - (chip << 1) | 1); + (chip << 1) | 1, &flags); /* prepare ACK if at least one byte must be received */ if (length > 0) - twsi_control_flags |= MVTWSI_CONTROL_ACK; + flags |= MVTWSI_CONTROL_ACK; /* now receive actual bytes */ while ((status == 0) && length--) { /* reset NAK if we if no more to read now */ if (length == 0) - twsi_control_flags &= ~MVTWSI_CONTROL_ACK; + flags &= ~MVTWSI_CONTROL_ACK; /* read current byte */ - status = twsi_recv(adap, data++); + status = twsi_recv(adap, data++, &flags); } /* Stop transaction */ status = twsi_stop(adap, status); @@ -441,16 +435,18 @@ static int twsi_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, int alen, uchar *data, int length) { int status; + u8 flags = 0; /* begin i2c write to send the eeprom adress bytes then data bytes */ - status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1)); + status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1), &flags); /* send addr bytes */ while ((status == 0) && alen--) status = twsi_send(adap, addr >> (8*alen), - MVTWSI_STATUS_DATA_W_ACK); + MVTWSI_STATUS_DATA_W_ACK, &flags); /* send data bytes */ while ((status == 0) && (length-- > 0)) - status = twsi_send(adap, *(data++), MVTWSI_STATUS_DATA_W_ACK); + status = twsi_send(adap, *(data++), MVTWSI_STATUS_DATA_W_ACK, + &flags); /* Stop transaction */ status = twsi_stop(adap, status); /* return 0 or status of first failure */ |