diff options
| author | Stefan Roese <sr@denx.de> | 2015-12-10 15:02:38 +0100 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2016-01-14 14:08:59 +0100 |
| commit | 698ffab239609e75b8de8f7009c06311e8b0b21a (patch) | |
| tree | e0f126720e8bcae796da79efdc45c2014a6989ed /drivers/ddr/marvell/axp | |
| parent | bf0db8b82a0f2e1abcb073fe0b72e6b4ba7c5fe0 (diff) | |
| download | u-boot-imx-698ffab239609e75b8de8f7009c06311e8b0b21a.zip u-boot-imx-698ffab239609e75b8de8f7009c06311e8b0b21a.tar.gz u-boot-imx-698ffab239609e75b8de8f7009c06311e8b0b21a.tar.bz2 | |
arm: mvebu: Make ECC support configurable on Armada XP
Currently, ECC support is enabled for all Armada XP boards. So the
DDR3 driver tries to configure the controller with ECC support, even
on boards without ECC. This patch makes this ECC optional which now
can be configured on a board-per-board basis.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Phil Sutter <phil@nwl.cc>
Diffstat (limited to 'drivers/ddr/marvell/axp')
| -rw-r--r-- | drivers/ddr/marvell/axp/ddr3_axp.h | 3 | ||||
| -rw-r--r-- | drivers/ddr/marvell/axp/ddr3_axp_config.h | 5 |
2 files changed, 8 insertions, 0 deletions
diff --git a/drivers/ddr/marvell/axp/ddr3_axp.h b/drivers/ddr/marvell/axp/ddr3_axp.h index d9e33f7..75d315a 100644 --- a/drivers/ddr/marvell/axp/ddr3_axp.h +++ b/drivers/ddr/marvell/axp/ddr3_axp.h @@ -33,7 +33,10 @@ #define SAR1_CPU_CORE_MASK 0x00000018 #define SAR1_CPU_CORE_OFFSET 3 +/* Only enable ECC if the board selects it */ +#ifdef CONFIG_BOARD_ECC_SUPPORT #define ECC_SUPPORT +#endif #define NEW_FABRIC_TWSI_ADDR 0x4E #ifdef CONFIG_DB_784MP_GP #define BUS_WIDTH_ECC_TWSI_ADDR 0x4E diff --git a/drivers/ddr/marvell/axp/ddr3_axp_config.h b/drivers/ddr/marvell/axp/ddr3_axp_config.h index a672044..25c34fb 100644 --- a/drivers/ddr/marvell/axp/ddr3_axp_config.h +++ b/drivers/ddr/marvell/axp/ddr3_axp_config.h @@ -44,7 +44,12 @@ * DDR3_TRAINING_DEBUG - Debug prints of internal code */ #define DDR_TARGET_FABRIC 5 +/* Only enable ECC if the board selects it */ +#ifdef CONFIG_BOARD_ECC_SUPPORT #define DRAM_ECC 1 +#else +#define DRAM_ECC 0 +#endif #ifdef MV_DDR_32BIT #define BUS_WIDTH 32 |