summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.(none)>2005-09-25 02:00:47 +0200
committerWolfgang Denk <wd@pollux.(none)>2005-09-25 02:00:47 +0200
commitfe7eb5d88bd593a35a13a0a84997ab6c41397bac (patch)
treedd5040f7031de8efb5f562f826b3ee8f0d929158 /doc
parent74f4304ee717d0f4b3a27e7fd4a64944749b8783 (diff)
downloadu-boot-imx-fe7eb5d88bd593a35a13a0a84997ab6c41397bac.zip
u-boot-imx-fe7eb5d88bd593a35a13a0a84997ab6c41397bac.tar.gz
u-boot-imx-fe7eb5d88bd593a35a13a0a84997ab6c41397bac.tar.bz2
Cleanup
Diffstat (limited to 'doc')
-rw-r--r--doc/README-integrator23
1 files changed, 10 insertions, 13 deletions
diff --git a/doc/README-integrator b/doc/README-integrator
index 93d7688..c435c88 100644
--- a/doc/README-integrator
+++ b/doc/README-integrator
@@ -12,7 +12,7 @@ Overview :
--------
There are two Integrator variants - Integrator/AP and Integrator/CP.
Each may be fitted with a variety of core modules (CMs).
-Each CM consists of a ARM processor core and associated hardware e.g
+Each CM consists of a ARM processor core and associated hardware e.g
FPGA implementing various controllers and/or register
SSRAM
SDRAM
@@ -26,29 +26,29 @@ a) Run ARM boot monitor, manually run U-Boot image from flash
b) Run ARM boot monitor, automatically run U-Boot image from flash
c) Run U-Boot image direct from flash.
-In cases a) and b) the ARM boot monitor will have configured the CM and mapped
+In cases a) and b) the ARM boot monitor will have configured the CM and mapped
writeable memory to 0x00000000 in the Integrator address space.
U-Boot has to carry out minimal configration before standard code is run.
In case c) it may be necessary for U-Boot to perform CM dependent initialization.
Configuring U-Boot :
-------------------
+------------------
The makefile contains targets for Integrator platforms of both types
-fitted with all current variants of CM. If these targets are to be used with
-boot process c) above then CONFIG_INIT_CRITICAL may need to be defined to ensure
+fitted with all current variants of CM. If these targets are to be used with
+boot process c) above then CONFIG_INIT_CRITICAL may need to be defined to ensure
that the CM is correctly configured.
There are also targets independent of CM. These may not be suitable for
-boot process c) above. They have been preserved for backward compatibility with
+boot process c) above. They have been preserved for backward compatibility with
existing build processes.
Code Hierarchy Applied :
----------------------
-Code specific to initialization of a particular ARM processor has been placed in
+Code specific to initialization of a particular ARM processor has been placed in
cpu/arm<>/start.S so that it may be used by other boards.
-However, to avoid duplicating code through all processor files, a generic core
+However, to avoid duplicating code through all processor files, a generic core
for ARM Integrator CMs has been added
cpu/arm_intcm
@@ -57,10 +57,7 @@ Otherwise. for example, the standard CM reset via the CM control register would
need placing in each CM processor file......
Code specific to the initialization of the CM, rather than the cpu, and initialization
-of the Integrator board itself, has been placed in
+of the Integrator board itself, has been placed in
- board/integrator<>/platform.S
+ board/integrator<>/platform.S
board/integrator<>/integrator<>.c
-
-
-