summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorMichael Kurz <michi.kurz@gmail.com>2017-01-22 16:04:23 +0100
committerTom Rini <trini@konsulko.com>2017-01-28 14:04:42 -0500
commitb1a8de7e07a6b40e7c5920566836862cd07df08a (patch)
tree3071e082130d761e38d0c8811277d50891700050 /doc
parent797c3c13a9b8fcedf134e30491496733becc3560 (diff)
downloadu-boot-imx-b1a8de7e07a6b40e7c5920566836862cd07df08a.zip
u-boot-imx-b1a8de7e07a6b40e7c5920566836862cd07df08a.tar.gz
u-boot-imx-b1a8de7e07a6b40e7c5920566836862cd07df08a.tar.bz2
ARM: DTS: stm32: add stm32f746-disco device tree files
This patch adds the DTS source files needed for stm32f746-disco board The files are based on the stm32f429/469 files from current linux kernel. Source for "arch/arm/dts/armv7-m.dtsi": Linux: "arch/arm/boot/dts/armv7-m.dtsi" Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
Diffstat (limited to 'doc')
-rw-r--r--doc/device-tree-bindings/spi/spi-stm32-qspi.txt39
1 files changed, 39 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/spi/spi-stm32-qspi.txt b/doc/device-tree-bindings/spi/spi-stm32-qspi.txt
new file mode 100644
index 0000000..6c7da1d
--- /dev/null
+++ b/doc/device-tree-bindings/spi/spi-stm32-qspi.txt
@@ -0,0 +1,39 @@
+STM32 QSPI controller device tree bindings
+--------------------------------------------
+
+Required properties:
+- compatible : should be "st,stm32-qspi".
+- reg : 1. Physical base address and size of SPI registers map.
+ 2. Physical base address & size of mapped NOR Flash.
+- spi-max-frequency : Max supported spi frequency.
+- status : enable in requried dts.
+
+Connected flash properties
+--------------------------
+- spi-max-frequency : Max supported spi frequency.
+- spi-tx-bus-width : Bus width (number of lines) for writing (1-4)
+- spi-rx-bus-width : Bus width (number of lines) for reading (1-4)
+- memory-map : Address and size for memory-mapping the flash
+
+Example:
+ qspi: quadspi@A0001000 {
+ compatible = "st,stm32-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <92>;
+ spi-max-frequency = <108000000>;
+ status = "okay";
+
+ qflash0: n25q128a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q128a13", "spi-flash";
+ spi-max-frequency = <108000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ memory-map = <0x90000000 0x1000000>;
+ reg = <0>;
+ };
+ };