summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorHaavard Skinnemoen <haavard.skinnemoen@atmel.com>2009-03-23 10:22:41 +0100
committerHaavard Skinnemoen <haavard.skinnemoen@atmel.com>2009-03-23 10:22:41 +0100
commit8206bfae3ab7f99965136384360ba2de0c6f4c3b (patch)
treee11bf0fad2e418e6771e8db7dbcb6630a6053f0c /doc
parentee1702d75a30d076139d1841383a1fa7220a0e11 (diff)
parent58a518c3d8a2c7de11d414e8b903495daee7dc7e (diff)
downloadu-boot-imx-8206bfae3ab7f99965136384360ba2de0c6f4c3b.zip
u-boot-imx-8206bfae3ab7f99965136384360ba2de0c6f4c3b.tar.gz
u-boot-imx-8206bfae3ab7f99965136384360ba2de0c6f4c3b.tar.bz2
Merge branch 'mimc200'
Diffstat (limited to 'doc')
-rw-r--r--doc/README.AVR3224
-rw-r--r--doc/README.AVR32-port-muxing208
2 files changed, 216 insertions, 16 deletions
diff --git a/doc/README.AVR32 b/doc/README.AVR32
index abec872..632cc05 100644
--- a/doc/README.AVR32
+++ b/doc/README.AVR32
@@ -1,10 +1,3 @@
-From: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Wed, 30 Aug 2006 17:01:46 +0200
-Subject: [PATCH] AVR32 architecture support
-
-This patch adds common infrastructure code for the Atmel AVR32
-architecture.
-
AVR32 is a new high-performance 32-bit RISC microprocessor core,
designed for cost-sensitive embedded applications, with particular
emphasis on low power consumption and high code density. The AVR32
@@ -16,18 +9,17 @@ by the AVR32 Architecture Manual, available from
http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
-A GNU toolchain with support for AVR32 is included with the ATSTK1000
-BSP, which can be downloaded as an ISO image from
+A GNU toolchain with support for AVR32, along with non-GNU programming
+and debugging support, can be downloaded from
-http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
+http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4118
-Alternatively, you can build it yourself by following the
-Getting Started guide at avr32linux.org, which also provides links
-to the necessary sources and patches you need to download:
+A full set of u-boot, kernel and filesystem images can be built using
+buildroot. This will also produce a working toolchain which can be
+used instead of the official GNU toolchain above. A customized version
+of buildroot for AVR32 can be downloaded here:
-http://avr32linux.org/twiki/bin/view/Main/GettingStarted
+http://www.atmel.no/buildroot/
The AVR32 ports of u-boot, the Linux kernel, the GNU toolchain and
other associated software are actively supported by Atmel Corporation.
-
-Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
diff --git a/doc/README.AVR32-port-muxing b/doc/README.AVR32-port-muxing
new file mode 100644
index 0000000..b53799d
--- /dev/null
+++ b/doc/README.AVR32-port-muxing
@@ -0,0 +1,208 @@
+AVR32 Port multiplexer configuration
+====================================
+
+On AVR32 chips, most external I/O pins are routed through a port
+multiplexer. There are currently two kinds of port multiplexer
+hardware around with different register interfaces:
+
+ * PIO (AT32AP700x; this is also used on ARM AT91 chips)
+ * GPIO (all other AVR32 chips)
+
+The "PIO" variant supports multiplexing up to two peripherals per pin
+in addition to GPIO (software control). Each pin has configurable
+pull-up, glitch filter, interrupt and multi-drive capabilities.
+
+The "GPIO" variant supports multiplexing up to four peripherals per
+pin in addition to GPIO. Each pin has configurable
+pull-up/pull-down/buskeeper, glitch filter, interrupt, open-drain and
+schmitt-trigger capabilities, as well as configurable drive strength
+and slew rate control.
+
+Both controllers are configured using the same API, but the functions
+may accept different values for some parameters depending on the
+actual portmux implementation, and some parameters may be ignored by
+one of the implementation (e.g. the "PIO" implementation will ignore
+the drive strength flags since the hardware doesn't support
+configurable drive strength.)
+
+Selecting the portmux implementation
+------------------------------------
+Since u-boot is lacking a Kconfig-style configuration engine, the
+portmux implementation must be selected manually by defining one of
+the following symbols:
+
+ CONFIG_PORTMUX_PIO
+ CONFIG_PORTMUX_GPIO
+
+depending on which implementation the chip in question uses.
+
+Identifying pins
+----------------
+The portmux configuration functions described below identify the pins
+to act on based on two parameters: A "port" (i.e. a block of pins
+that somehow belong together) and a pin mask. Both are defined in an
+implementation-specific manner.
+
+The available ports are defined on the form
+
+ #define PORTMUX_PORT_A (something)
+
+where "A" matches the identifier given in the chip's data sheet, and
+"something" is whatever the portmux implementation needs to identify
+the port (usually a memory address).
+
+The pin mask is a bitmask where each '1' bit indicates a pin to apply
+the current operation to. The width of the bitmask may vary from port
+to port, but it is never wider than 32 bits (which is the width of
+'unsigned long' on avr32).
+
+Selecting functions
+-------------------
+Each pin can either be assigned to one of a predefined set of on-chip
+peripherals, or it can be set up to be controlled by software. For the
+former case, the portmux implementation defines an enum containing all
+the possible peripheral functions that can be selected. For example,
+the PIO implementation, which allows multiplexing two peripherals per
+pin, defines it like this:
+
+ enum portmux_function {
+ PORTMUX_FUNC_A,
+ PORTMUX_FUNC_B,
+ };
+
+To configure a set of pins to be connected to a given peripheral
+function, the following function is used.
+
+ void portmux_select_peripheral(void *port, unsigned long pin_mask,
+ enum portmux_function func, unsigned long flags);
+
+To configure a set of pins to be controlled by software (GPIO), the
+following function is used. In this case, no "function" argument is
+required since "GPIO" is a function in its own right.
+
+ void portmux_select_gpio(void *port, unsigned int pin_mask,
+ unsigned long flags);
+
+Both of these functions take a "flags" parameter which may be used to
+alter the default configuration of the pin. This is a bitmask of
+various flags defined in an implementation-specific way, but the names
+of the flags are the same on all implementations.
+
+ PORTMUX_DIR_OUTPUT
+ PORTMUX_DIR_INPUT
+
+These mutually-exlusive flags configure the initial direction of the
+pins. PORTMUX_DIR_OUTPUT means that the pins are driven by the CPU,
+while PORTMUX_DIR_INPUT means that the pins are tristated by the CPU.
+These flags are ignored by portmux_select_peripheral().
+
+ PORTMUX_INIT_HIGH
+ PORTMUX_INIT_LOW
+
+These mutually-exclusive flags configure the initial state of the
+pins: High (Vdd) or low (Vss). They are only effective when
+portmux_select_gpio() is called with the PORTMUX_DIR_OUTPUT flag set.
+
+ PORTMUX_PULL_UP
+ PORTMUX_PULL_DOWN
+ PORTMUX_BUSKEEPER
+
+These mutually-exclusive flags are used to enable any on-chip CMOS
+resistors connected to the pins. PORTMUX_PULL_UP causes the pins to be
+pulled up to Vdd, PORTMUX_PULL_DOWN causes the pins to be pulled down
+to Vss, and PORTMUX_BUSKEEPER will keep the pins in whatever state
+they were left in by whatever was driving them last. If none of the
+flags are specified, the pins are left floating if no one are driving
+them; this is only recommended for always-output pins (e.g. extern
+address and control lines driven by the CPU.)
+
+Note that the "PIO" implementation will silently ignore the
+PORTMUX_PULL_DOWN flag and interpret PORTMUX_BUSKEEPER as
+PORTMUX_PULL_UP.
+
+ PORTMUX_DRIVE_MIN
+ PORTMUX_DRIVE_LOW
+ PORTMUX_DRIVE_HIGH
+ PORTMUX_DRIVE_MAX
+
+These mutually-exlusive flags determine the drive strength of the
+pins. PORTMUX_DRIVE_MIN will give low power-consumption, but may cause
+corruption of high-speed signals. PORTMUX_DRIVE_MAX will give high
+power-consumption, but may be necessary on pins toggling at very high
+speeds. PORTMUX_DRIVE_LOW and PORTMUX_DRIVE_HIGH specify something in
+between the other two.
+
+Note that setting the drive strength too high may cause excessive
+overshoot and EMI problems, which may in turn cause signal corruption.
+Also note that the "PIO" implementation will silently ignore these
+flags.
+
+ PORTMUX_OPEN_DRAIN
+
+This flag will configure the pins as "open drain", i.e. setting the
+pin state to 0 will drive it low, while setting it to 1 will leave it
+floating (or, in most cases, let it be pulled high by an internal or
+external pull-up resistor.) In the data sheet for chips using the
+"PIO" variant, this mode is called "multi-driver".
+
+Enabling specific peripherals
+-----------------------------
+In addition to the above functions, each chip provides a set of
+functions for setting up the port multiplexer to use a given
+peripheral. The following are some of the functions available.
+
+All the functions below take a "drive_strength" parameter, which must
+be one of the PORTMUX_DRIVE_x flags specified above. Any other
+portmux flags will be silently filtered out.
+
+To set up the External Bus Interface (EBI), call
+
+ void portmux_enable_ebi(unsigned int bus_width,
+ unsigned long flags, unsigned long drive_strength)
+
+where "bus_width" must be either 16 or 32. "flags" can be any
+combination of the following flags.
+
+ PORTMUX_EBI_CS(x) /* Enable chip select x */
+ PORTMUX_EBI_NAND /* Enable NAND flash interface */
+ PORTMUX_EBI_CF(x) /* Enable CompactFlash interface x */
+ PORTMUX_EBI_NWAIT /* Enable NWAIT signal */
+
+To set up a USART, call
+
+ void portmux_enable_usartX(unsigned long drive_strength);
+
+where X is replaced by the USART instance to be configured.
+
+To set up an ethernet MAC:
+
+ void portmux_enable_macbX(unsigned long flags,
+ unsigned long drive_strength);
+
+where X is replaced by the MACB instance to be configured. "flags" can
+be any combination of the following flags.
+
+ PORTMUX_MACB_RMII /* Just set up the RMII interface */
+ PORTMUX_MACB_MII /* Set up full MII interface */
+ PORTMUX_MACB_SPEED /* Enable the SPEED pin */
+
+To set up the MMC controller:
+
+ void portmux_enable_mmci(unsigned long slot, unsigned long flags
+ unsigned long drive_strength);
+
+where "slot" identifies which of the alternative SD card slots to
+enable. "flags" can be any combination of the following flags:
+
+ PORTMUX_MMCI_4BIT /* Enable 4-bit SD card interface */
+ PORTMUX_MMCI_8BIT /* Enable 8-bit MMC+ interface */
+ PORTMUX_MMCI_EXT_PULLUP /* Board has external pull-ups */
+
+To set up a SPI controller:
+
+ void portmux_enable_spiX(unsigned long cs_mask,
+ unsigned long drive_strength);
+
+where X is replaced by the SPI instance to be configured. "cs_mask" is
+a 4-bit bitmask specifying which of the four standard chip select
+lines to set up as GPIOs.