diff options
author | Michal Simek <michal.simek@xilinx.com> | 2015-07-22 10:47:33 +0200 |
---|---|---|
committer | Michal Simek <michal.simek@xilinx.com> | 2015-07-28 11:56:22 +0200 |
commit | 40b383fa84cf5d54bfe79ecb6d5387c791f79421 (patch) | |
tree | 18ee498a2e937c2a58bc50c19d38189061ec8ff4 /doc | |
parent | 3ffcdc7aafe98627418dffbd9dd90eebcfc1deac (diff) | |
download | u-boot-imx-40b383fa84cf5d54bfe79ecb6d5387c791f79421.zip u-boot-imx-40b383fa84cf5d54bfe79ecb6d5387c791f79421.tar.gz u-boot-imx-40b383fa84cf5d54bfe79ecb6d5387c791f79421.tar.bz2 |
spi: Fix zynq SPI binding
Zynq is using Cadence IP where binding is documented in the Linux kernel
and there is no reason to use different binding.
Synchronize it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Diffstat (limited to 'doc')
-rw-r--r-- | doc/device-tree-bindings/spi/spi-zynq.txt | 35 |
1 files changed, 19 insertions, 16 deletions
diff --git a/doc/device-tree-bindings/spi/spi-zynq.txt b/doc/device-tree-bindings/spi/spi-zynq.txt index f397a36..cb29457 100644 --- a/doc/device-tree-bindings/spi/spi-zynq.txt +++ b/doc/device-tree-bindings/spi/spi-zynq.txt @@ -1,29 +1,32 @@ -Zynq SPI controller Device Tree Bindings ----------------------------------------- +Cadence SPI controller Device Tree Bindings +------------------------------------------- Required properties: -- compatible : Should be "xlnx,spi-zynq". +- compatible : Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6". - reg : Physical base address and size of SPI registers map. -- status : Status will be disabled in dtsi and enabled in required dts. -- interrupt-parent : Must be core interrupt controller. - interrupts : Property with a value describing the interrupt number. -- clocks : Clock phandles (see clock bindings for details). +- interrupt-parent : Must be core interrupt controller - clock-names : List of input clock names - "ref_clk", "pclk" (See clock bindings for details). +- clocks : Clock phandles (see clock bindings for details). - spi-max-frequency : Maximum SPI clocking speed of device in Hz +Optional properties: +- num-cs : Number of chip selects used. + If a decoder is used, this will be the number of + chip selects after the decoder. +- is-decoded-cs : Flag to indicate whether decoder is used or not. + Example: - spi@e0006000 { - compatible = "xlnx,zynq-spi"; - reg = <0xe0006000 0x1000>; - status = "disabled"; - interrupt-parent = <&intc>; - interrupts = <0 26 4>; - clocks = <&clkc 25>, <&clkc 34>; + spi@e0007000 { + compatible = "xlnx,zynq-spi-r1p6"; clock-names = "ref_clk", "pclk"; - spi-max-frequency = <166666700>; - #address-cells = <1>; - #size-cells = <0>; + clocks = <&clkc 26>, <&clkc 35>; + interrupt-parent = <&intc>; + interrupts = <0 49 4>; + num-cs = <4>; + is-decoded-cs = <0>; + reg = <0xe0007000 0x1000>; } ; |