Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

* 'master' of git://git.denx.de/u-boot-mpc85xx:
  powerpc/p3060: Add SoC related support for P3060 platform
  powerpc/85xx: Add support for setting up RAID engine liodns on P5020
  powerpc/85xx: Refactor some defines out of corenet_ds.h
  fm-eth: Add ability for board code to disable a port
  powerpc/mpc8548: Add workaround for erratum NMG_LBC103
  powerpc/mpc8548: Add workaround for erratum NMG_DDR120
  powerpc/mpc85xxcds: Fix PCI speed
  powerpc/mpc8548cds: Fix booting message
  powerpc/p4080: Add support for secure boot flow
  powerpc/85xx: Add Secure Boot support on P1010RDB for NOR, NAND & SPIFLASH
  powerpc/85xx: Add PBL & SECUREBOOT support on P3041/P5020DS boards
  powerpc/p2041rdb: remove watch dog related codes
  powerpc/p2041rdb: updated description of cpld command
  powerpc/p2041rdb: add more ddr frequencies support
  powerpc/p2041rdb: set sysclk according to status of physical switch SW1
  powerpc/p2041rdb: update cpld reset command according to CPLD 2.0
  powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver
  powerpc/mpc83xx: Migrate from spd_sdram to unified DDR driver
  powerpc/mpc8xxx: Add DDR2 to unified DDR driver
  powerpc/mpc8xxx: Fix picos_to_mclk() and get_memory_clk_period_ps()
  powerpc/mpc8xxx: Add SPD EEPROM address for single controller 2 slots
  powerpc/mpc8xxx: Fix DDR code for empty first DIMM slot and enable DQS_en
  powerpc/85xx: Refactor P2041RDB to use common p_corenet files
  powerpc/85xx: refactor common P-Series CoreNet files for FSL boards
  powerpc/85xx: Enable CMD_REGINFO on corenet boards
  powerpc/85xx: p2041rdb - Remove unused 'execute' perm in TLB entries
  powerpc/85xx: Fix USB protocol definitions for P1020RDB
  powerpc/corenet_ds: Use separated speed tables for UDIMM and RDIMM
  powerpc/mpc8xxx: Move DDR RCW overriding to common code
  powerpc/mpc8xxx: Extend CWL table
  powerpc/85xx: Cleanup how SVR_MAJ() is defined on MPC8536
  powerpc/85xx: Cleanup extern in corenet_ds board code
  powerpc/p2041rdb: Add ethernet support on P2041RDB board
  powerpc/85xx: Add networking support to P1023RDS
  powerpc/hydra: Add ethernet support on P5020/P3041 DS boards
  powerpc/85xx: Add FMan ethernet support to P4080DS
  powerpc/85xx: Add support for FMan ethernet in Independent mode
  powerpc/mpc8548cds: Cleanup mpc8548cds.c
  powerpc/mp: add support for discontiguous cores
  powerpc/85xx: corenet_ds - Remove unused 'execute' perm in TLB entries
  fdt: Add new fdt_create_phandle helper
  fdt: Rename fdt_create_phandle to fdt_set_phandle
  powerpc/85xx: Fix compile warnings/errors if CONFIG_SYS_DPAA_FMAN isn't set
  fsl_ifc: Add the workaround for erratum IFC A-003399(enabled on P1010)
  powerpc/P1010: Add workaround for erratum P1010-A003549 (related to IFC)
  fsl_ifc: Add the workaround for erratum IFC-A002769 (enable on P1010)
  powerpc/85xx: Expanding the window of CCSRBAR in AS=1 from 4k to 1M
  powerpc/85xx: Add NAND/NAND_SPL support to P1010RDB
  nand: Freescale Integrated Flash Controller NAND support
  powerpc/85xx: Add basic support for P1010RDB
  powerpc/85xx: Add support for new P102x/P2020 RDB style boards
  powerpc/85xx: relocate CCSR before creating the initial RAM area
  powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros
  powerpc/85xx: Enable internal USB UTMI PHY on p204x/p3041/p50x0
  powerpc/85xx: Add ULPI and UTMI USB Phy support for P1010/P1014

2 files changed, 98 insertions, 0 deletions

diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr
index c1ee0a6..abfb7f1 100644
--- a/doc/README.fsl-ddr
+++ b/doc/README.fsl-ddr
@@ -170,3 +170,55 @@ Single slot system
 
 Reference http://www.xrosstalkmag.com/mag_issues/xrosstalk_oct08_final.pdf
 	  http://download.micron.com/pdf/technotes/ddr3/tn4108_ddr3_design_guide.pdf
+
+
+Table for ODT for DDR2
+======================
+Two slots system
++-----------------------+----------+---------------+-----------------------------+-----------------------------+
+|     Configuration     |          |DRAM controller|           Slot 1            |            Slot 2           |
++-----------+-----------+----------+-------+-------+--------------+--------------+--------------+--------------+
+|           |           |          |       |       |     Rank 1   |     Rank 2   |   Rank 1     |    Rank 2    |
++  Slot 1   |   Slot 2  |Write/Read| Write | Read  |-------+------+-------+------+-------+------+-------+------+
+|           |           |          |       |       | Write | Read | Write | Read | Write | Read | Write | Read |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|           |           |  Slot 1  |  off  | 150   | off   | off  | off   | off  | 75    | 75   | off   | off  |
+| Dual Rank | Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|           |           |  Slot 2  |  off  | 150   | 75    | 75   | off   | off  | off   | off  | off   | off  |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|           |           |  Slot 1  |  off  | 150   | off   | off  | off   | off  | 75    | 75   |       |      |
+| Dual Rank |Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|           |           |  Slot 2  |  off  | 150   | 75    | 75   | off   | off  | off   | off  |       |      |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|           |           |  Slot 1  |  off  | 150   | off   | off  |       |      | 75    | 75   | off   | off  |
+|Single Rank| Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|           |           |  Slot 2  |  off  | 150   | 75    | 75   |       |      | off   | off  | off   | off  |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|           |           |  Slot 1  |  off  | 150   | off   | off  |       |      | 75    | 75   |       |      |
+|Single Rank|Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|           |           |  Slot 2  |  off  | 150   | 75    | 75   |       |      | off   | off  |       |      |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| Dual Rank |   Empty   |  Slot 1  |  off  | 75    | 150   | off  | off   | off  |       |      |       |      |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|   Empty   | Dual Rank |  Slot 2  |  off  | 75    |       |      |       |      | 150   | off  | off   | off  |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|Single Rank|   Empty   |  Slot 1  |  off  | 75    | 150   | off  |       |      |       |      |       |      |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|   Empty   |Single Rank|  Slot 2  |  off  | 75    |       |      |       |      | 150   | off  |       |      |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+
+Single slot system
++-------------+------------+---------------+-----------------------------+
+|             |            |DRAM controller|     Rank 1   |    Rank 2    |
+|Configuration| Write/Read |-------+-------+-------+------+-------+------+
+|             |            | Write | Read  | Write | Read | Write | Read |
++-------------+------------+-------+-------+-------+------+-------+------+
+|             |   R1       | off   | 75    | 150   | off  | off   | off  |
+|  Dual Rank  |------------+-------+-------+-------+------+-------+------+
+|             |   R2       | off   | 75    | 150   | off  | off   | off  |
++-------------+------------+-------+-------+-------+------+-------+------+
+| Single Rank |   R1       | off   | 75    | 150   | off  |
++-------------+------------+-------+-------+-------+------+
+
+Reference http://www.samsung.com/global/business/semiconductor/products/dram/downloads/applicationnote/ddr2_odt_control_200603.pdf
+
diff --git a/doc/README.p1_p2_rdb_pc b/doc/README.p1_p2_rdb_pc
new file mode 100644
index 0000000..4437731
--- /dev/null
+++ b/doc/README.p1_p2_rdb_pc
@@ -0,0 +1,46 @@
+Overview
+--------
+P1_P2_RDB_PC represents a set of boards including
+    P1020MSBG-PC
+    P1020RDB-PC
+    P1020UTM-PC
+    P1021RDB-PC
+    P1024RDB
+    P1025RDB
+    P2020RDB-PC
+
+They have similar design of P1020RDB but have DDR3 instead of DDR2. P2020RDB-PC
+has 64-bit DDR. All others have 32-bit DDR.
+
+Key features on these boards include:
+    * DDR3
+    * NOR flash
+    * NAND flash (on RDB's only)
+    * SPI flash (on RDB's only)
+    * SDHC/MMC card slot
+    * VSC7385 Ethernet switch (on P1020MBG, P1020RDB, & P1021RDB)
+    * PCIE slot and mini-PCIE slots
+
+As these boards use soldered DDR chips not regular DIMMs, an on-board EEPROM
+is used to store SPD data. In case of absent or corrupted SPD, falling back
+to timing data embedded in the source code will be used. Raw timing data is
+extracted from DDR chip datasheet. Different speeds of DDR are supported with
+this approach. ODT option is forced to fit this set of boards, again because
+they don't have regular DIMMs.
+
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS is defined as 5ms to meet specification
+for writing timing.
+
+VSC firmware Address is defined by default in config file for eTSEC1.
+
+SD width is based off DIP switch. DIP switch is detected on the
+board by reading i2c bus and setting the appropriate mux values.
+
+Some boards have QE module in the silicon (P1021 and P1025). QE and eLBC have
+pins multiplexing. QE function needs to be disabled to access Nor Flash and
+CPLD. QE-UEC and QE-UART can be enabled for linux kernel by setting "qe"
+in hwconfig. In addition, QE-UEC and QE-TDM also have pins multiplexing, to
+enable QE-TDM for linux kernel, set "qe;tdm" in hwconfig. Syntax is as below
+
+'setenv hwconfig qe' to enable QE UEC/UART and disable Nor-Flash/CPLD.
+'setenv hwconfig 'qe;tdm'' to enalbe QE TDM and disable Nor-Flash/CPLD.