diff options
| author | Fabio Estevam <fabio.estevam@freescale.com> | 2014-11-14 11:27:23 -0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2014-11-20 10:30:19 +0100 |
| commit | cdbdde3f56e1752d7a3f479693251f0ab459431a (patch) | |
| tree | debac2e248e34f431c0504308137eaabb98b43aa /doc/README.ppc440 | |
| parent | 573960aca5c420c7c62ff49c0ab13a4a9c50c7b3 (diff) | |
| download | u-boot-imx-cdbdde3f56e1752d7a3f479693251f0ab459431a.zip u-boot-imx-cdbdde3f56e1752d7a3f479693251f0ab459431a.tar.gz u-boot-imx-cdbdde3f56e1752d7a3f479693251f0ab459431a.tar.bz2 | |
mx6qsabreauto: Add parallel NOR flash support
mx6sabreauto boards come with 32 MiB of parallel NOR flash.
Add support for it:
U-Boot 2015.01-rc1-18107-g1543636-dirty (Nov 14 2014 - 11:11:04)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: MX6Q-Sabreauto revA
I2C: ready
DRAM: 2 GiB
Flash: 32 MiB
NAND: 0 MiB
Due to pin conflict with I2C3, only define configure I2C3 IOMUX when flash is
not used.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Diffstat (limited to 'doc/README.ppc440')
0 files changed, 0 insertions, 0 deletions