diff options
| author | Peng Fan <Peng.Fan@freescale.com> | 2015-07-20 19:28:35 +0800 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2015-08-02 11:05:09 +0200 |
| commit | f0ff57b0b272388f24d3dc313f0f97456ee78335 (patch) | |
| tree | 5c68c56d0ea4fe2868c4c7e3eb810ee564aafa3f /doc/README.mpc74xx | |
| parent | 6f4b65eda919a81a02e6acb769060bb8fb121d89 (diff) | |
| download | u-boot-imx-f0ff57b0b272388f24d3dc313f0f97456ee78335.zip u-boot-imx-f0ff57b0b272388f24d3dc313f0f97456ee78335.tar.gz u-boot-imx-f0ff57b0b272388f24d3dc313f0f97456ee78335.tar.bz2 | |
imx: mx6ul_14x14_evk add basic board support
1. Add USDHC, I2C, UART, 74LV, USB, QSPI support.
2. Support SPL
3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default
supports sd for usdhc2, but can do hardware rework to make usdhc2 support
emmc.
Boot Log:
U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59)
reading u-boot.img
reading u-boot.img
U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800)
CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0
- invalid sensor device
Reset cause: POR
Board: MX6UL 14x14 EVK
I2C: ready
DRAM: 512 MiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Diffstat (limited to 'doc/README.mpc74xx')
0 files changed, 0 insertions, 0 deletions