diff options
| author | Ben Gardiner <bengardiner@nanometrics.ca> | 2011-04-28 11:03:21 +0000 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2011-05-12 23:34:02 +0200 |
| commit | 7124015adad59dea5e72103f63531f3367c6df80 (patch) | |
| tree | c0e88980d6512a06d82f17c9eb8111cbdcffc3de /doc/README.arm-relocation | |
| parent | f4379ceff0876f9e4c7c90796d64b6dd5351512a (diff) | |
| download | u-boot-imx-7124015adad59dea5e72103f63531f3367c6df80.zip u-boot-imx-7124015adad59dea5e72103f63531f3367c6df80.tar.gz u-boot-imx-7124015adad59dea5e72103f63531f3367c6df80.tar.bz2 | |
README.arm-relocation: get relocated address in gdb
When your emulator is connected at reset (or is used to load u-boot)
it is possible to get the relocation address from the gd->relocaddr
since gd is always in r8 (on ARM) it is addressable before the
gdb has remapped symbols.
Document this alternate method in-line with the original method
written by Heiko Schocher.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Heiko Schocher <hs@denx.de>
CC: Wolfgang Denk <wd@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'doc/README.arm-relocation')
| -rw-r--r-- | doc/README.arm-relocation | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation index 8bfb500..45f5ea7 100644 --- a/doc/README.arm-relocation +++ b/doc/README.arm-relocation @@ -164,6 +164,7 @@ Program received signal SIGSTOP, Stopped (signal). add-symbol-file u-boot 0x8ff08000 ^^^^^^^^^^ get this address from u-boot bdinfo command + or get it from gd->relocaddr in gdb => bdinfo rch_number = XXXXXXXXXX @@ -182,4 +183,11 @@ irq_sp = XXXXXXXXXX sp start = XXXXXXXXXX FB base = XXXXXXXXXX +or interrupt execution by any means and re-load the symbols at the location +specified by gd->relocaddr -- this is only valid after board_init_f. + +(gdb) set $s = gd->relocaddr +(gdb) symbol-file +(gdb) add-symbol-file u-boot $s + Now you can use gdb as usual :-) |