diff options
author | Peter Tyser <ptyser@xes-inc.com> | 2010-04-12 22:28:13 -0500 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2010-04-13 09:13:25 +0200 |
commit | c6fb83d21729321426308c3acff2a3dfb20d250b (patch) | |
tree | 85b569582345fdd9361d8524df08e92251c84a59 /cpu | |
parent | a4145534851bf74619cb373a942613a74547bb82 (diff) | |
download | u-boot-imx-c6fb83d21729321426308c3acff2a3dfb20d250b.zip u-boot-imx-c6fb83d21729321426308c3acff2a3dfb20d250b.tar.gz u-boot-imx-c6fb83d21729321426308c3acff2a3dfb20d250b.tar.bz2 |
blackfin: Move cpu/blackfin/* to arch/blackfin/cpu/*
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Diffstat (limited to 'cpu')
-rw-r--r-- | cpu/blackfin/.gitignore | 1 | ||||
-rw-r--r-- | cpu/blackfin/Makefile | 73 | ||||
-rwxr-xr-x | cpu/blackfin/bootrom-asm-offsets.awk | 41 | ||||
-rw-r--r-- | cpu/blackfin/bootrom-asm-offsets.c.in | 12 | ||||
-rw-r--r-- | cpu/blackfin/cache.S | 87 | ||||
-rw-r--r-- | cpu/blackfin/cpu.c | 112 | ||||
-rw-r--r-- | cpu/blackfin/cpu.h | 38 | ||||
-rw-r--r-- | cpu/blackfin/initcode.c | 687 | ||||
-rw-r--r-- | cpu/blackfin/interrupt.S | 152 | ||||
-rw-r--r-- | cpu/blackfin/interrupts.c | 159 | ||||
-rw-r--r-- | cpu/blackfin/jtag-console.c | 132 | ||||
-rw-r--r-- | cpu/blackfin/os_log.c | 30 | ||||
-rw-r--r-- | cpu/blackfin/reset.c | 106 | ||||
-rw-r--r-- | cpu/blackfin/serial.c | 193 | ||||
-rw-r--r-- | cpu/blackfin/serial.h | 263 | ||||
-rw-r--r-- | cpu/blackfin/start.S | 238 | ||||
-rw-r--r-- | cpu/blackfin/traps.c | 410 | ||||
-rw-r--r-- | cpu/blackfin/watchdog.c | 23 |
18 files changed, 0 insertions, 2757 deletions
diff --git a/cpu/blackfin/.gitignore b/cpu/blackfin/.gitignore deleted file mode 100644 index 0ec9d56..0000000 --- a/cpu/blackfin/.gitignore +++ /dev/null @@ -1 +0,0 @@ -bootrom-asm-offsets.[chs] diff --git a/cpu/blackfin/Makefile b/cpu/blackfin/Makefile deleted file mode 100644 index 211b8d5..0000000 --- a/cpu/blackfin/Makefile +++ /dev/null @@ -1,73 +0,0 @@ -# -# U-boot - Makefile -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Licensed under the GPL-2 or later. -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(CPU).a - -EXTRA := -CEXTRA := initcode.o -SEXTRA := start.o -SOBJS := interrupt.o cache.o -COBJS-y += cpu.o -COBJS-y += interrupts.o -COBJS-$(CONFIG_JTAG_CONSOLE) += jtag-console.o -COBJS-y += os_log.o -COBJS-y += reset.o -COBJS-y += serial.o -COBJS-y += traps.o -COBJS-$(CONFIG_HW_WATCHDOG) += watchdog.o - -ifeq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS) -COBJS-y += initcode.o -endif - -SRCS := $(SEXTRA:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS)) -EXTRA := $(addprefix $(obj),$(EXTRA)) -CEXTRA := $(addprefix $(obj),$(CEXTRA)) -SEXTRA := $(addprefix $(obj),$(SEXTRA)) - -all: $(obj).depend $(LIB) $(obj).depend $(EXTRA) $(CEXTRA) $(SEXTRA) check_initcode - -$(LIB): $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -$(OBJS): $(obj)bootrom-asm-offsets.h -$(obj)bootrom-asm-offsets.c: bootrom-asm-offsets.c.in bootrom-asm-offsets.awk - echo '#include <asm/mach-common/bits/bootrom.h>' | $(CPP) $(CPPFLAGS) - | gawk -f ./bootrom-asm-offsets.awk > $@.tmp - mv $@.tmp $@ -$(obj)bootrom-asm-offsets.s: $(obj)bootrom-asm-offsets.c - $(CC) $(CFLAGS) -S $^ -o $@.tmp - mv $@.tmp $@ -$(obj)bootrom-asm-offsets.h: $(obj)bootrom-asm-offsets.s - sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}" $^ > $@ - -# make sure our initcode (which goes into LDR) does not -# have relocs or external references -$(obj)initcode.o: CFLAGS += -fno-function-sections -fno-data-sections -READINIT = env LC_ALL=C $(CROSS_COMPILE)readelf -s $< -check_initcode: $(obj)initcode.o -ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS) - @if $(READINIT) | grep '\<GLOBAL\>.*\<UND\>' ; then \ - echo "$< contains external references!" 1>&2 ; \ - exit 1 ; \ - fi -endif - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/cpu/blackfin/bootrom-asm-offsets.awk b/cpu/blackfin/bootrom-asm-offsets.awk deleted file mode 100755 index 1d61824..0000000 --- a/cpu/blackfin/bootrom-asm-offsets.awk +++ /dev/null @@ -1,41 +0,0 @@ -#!/usr/bin/gawk -f -BEGIN { - print "/* DO NOT EDIT: AUTOMATICALLY GENERATED" - print " * Input files: bootrom-asm-offsets.awk bootrom-asm-offsets.c.in" - print " * DO NOT EDIT: AUTOMATICALLY GENERATED" - print " */" - print "" - system("cat bootrom-asm-offsets.c.in") - print "{" -} - -{ - /* find a structure definition */ - if ($0 ~ /typedef struct .* {/) { - delete members; - i = 0; - - /* extract each member of the structure */ - while (1) { - getline - if ($1 == "}") - break; - gsub(/[*;]/, ""); - members[i++] = $NF; - } - - /* grab the structure's name */ - struct = $NF; - sub(/;$/, "", struct); - - /* output the DEFINE() macros */ - while (i-- > 0) - print "\tDEFINE(" struct ", " members[i] ");" - print "" - } -} - -END { - print "\treturn 0;" - print "}" -} diff --git a/cpu/blackfin/bootrom-asm-offsets.c.in b/cpu/blackfin/bootrom-asm-offsets.c.in deleted file mode 100644 index 3146e46..0000000 --- a/cpu/blackfin/bootrom-asm-offsets.c.in +++ /dev/null @@ -1,12 +0,0 @@ -/* A little trick taken from the kernel asm-offsets.h where we convert - * the C structures automatically into a bunch of defines for use in - * the assembly files. - */ - -#include <linux/stddef.h> -#include <asm/mach-common/bits/bootrom.h> - -#define _DEFINE(sym, val) asm volatile("\n->" #sym " %0 " #val : : "i" (val)) -#define DEFINE(s, m) _DEFINE(offset_##s##_##m, offsetof(s, m)) - -int main(int argc, char *argv[]) diff --git a/cpu/blackfin/cache.S b/cpu/blackfin/cache.S deleted file mode 100644 index 6ed655a..0000000 --- a/cpu/blackfin/cache.S +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Blackfin cache control code - * - * Copyright 2003-2008 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - */ - -#include <asm/linkage.h> -#include <config.h> -#include <asm/blackfin.h> - -.text -/* Since all L1 caches work the same way, we use the same method for flushing - * them. Only the actual flush instruction differs. We write this in asm as - * GCC can be hard to coax into writing nice hardware loops. - * - * Also, we assume the following register setup: - * R0 = start address - * R1 = end address - */ -.macro do_flush flushins:req optflushins optnopins label - - R2 = -L1_CACHE_BYTES; - - /* start = (start & -L1_CACHE_BYTES) */ - R0 = R0 & R2; - - /* end = ((end - 1) & -L1_CACHE_BYTES) + L1_CACHE_BYTES; */ - R1 += -1; - R1 = R1 & R2; - R1 += L1_CACHE_BYTES; - - /* count = (end - start) >> L1_CACHE_SHIFT */ - R2 = R1 - R0; - R2 >>= L1_CACHE_SHIFT; - P1 = R2; - -.ifnb \label -\label : -.endif - P0 = R0; - LSETUP (1f, 2f) LC1 = P1; -1: -.ifnb \optflushins - \optflushins [P0]; -.endif -#if ANOMALY_05000443 -.ifb \optnopins -2: -.endif - \flushins [P0++]; -.ifnb \optnopins -2: \optnopins; -.endif -#else -2: \flushins [P0++]; -#endif - - RTS; -.endm - -/* Invalidate all instruction cache lines assocoiated with this memory area */ -ENTRY(_blackfin_icache_flush_range) - do_flush IFLUSH, , nop -ENDPROC(_blackfin_icache_flush_range) - -/* Flush all cache lines assocoiated with this area of memory. */ -ENTRY(_blackfin_icache_dcache_flush_range) - do_flush FLUSH, IFLUSH -ENDPROC(_blackfin_icache_dcache_flush_range) - -/* Throw away all D-cached data in specified region without any obligation to - * write them back. Since the Blackfin ISA does not have an "invalidate" - * instruction, we use flush/invalidate. Perhaps as a speed optimization we - * could bang on the DTEST MMRs ... - */ -ENTRY(_blackfin_dcache_flush_invalidate_range) - do_flush FLUSHINV -ENDPROC(_blackfin_dcache_flush_invalidate_range) - -/* Flush all data cache lines assocoiated with this memory area */ -ENTRY(_blackfin_dcache_flush_range) - do_flush FLUSH, , , .Ldfr -ENDPROC(_blackfin_dcache_flush_range) diff --git a/cpu/blackfin/cpu.c b/cpu/blackfin/cpu.c deleted file mode 100644 index 2c8fd86..0000000 --- a/cpu/blackfin/cpu.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * U-boot - cpu.c CPU specific functions - * - * Copyright (c) 2005-2008 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <command.h> -#include <asm/blackfin.h> -#include <asm/cplb.h> -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/trace.h> - -#include "cpu.h" -#include "serial.h" - -ulong bfin_poweron_retx; - -__attribute__ ((__noreturn__)) -void cpu_init_f(ulong bootflag, ulong loaded_from_ldr) -{ -#ifndef CONFIG_BFIN_BOOTROM_USES_EVT1 - /* Build a NOP slide over the LDR jump block. Whee! */ - char nops[0xC]; - serial_early_puts("NOP Slide\n"); - memset(nops, 0x00, sizeof(nops)); - memcpy((void *)L1_INST_SRAM, nops, sizeof(nops)); -#endif - - if (!loaded_from_ldr) { - /* Relocate sections into L1 if the LDR didn't do it -- don't - * check length because the linker script does the size - * checking at build time. - */ - serial_early_puts("L1 Relocate\n"); - extern char _stext_l1[], _text_l1_lma[], _text_l1_len[]; - memcpy(&_stext_l1, &_text_l1_lma, (unsigned long)_text_l1_len); - extern char _sdata_l1[], _data_l1_lma[], _data_l1_len[]; - memcpy(&_sdata_l1, &_data_l1_lma, (unsigned long)_data_l1_len); - } -#if defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) - /* The BF537 bootrom will reset the EBIU_AMGCTL register on us - * after it has finished loading the LDR. So configure it again. - */ - else - bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); -#endif - - /* Save RETX so we can pass it while booting Linux */ - bfin_poweron_retx = bootflag; - -#ifdef CONFIG_DEBUG_DUMP - /* Turn on hardware trace buffer */ - bfin_write_TBUFCTL(TBUFPWR | TBUFEN); -#endif - -#ifndef CONFIG_PANIC_HANG - /* Reset upon a double exception rather than just hanging. - * Do not do bfin_read on SWRST as that will reset status bits. - */ - bfin_write_SWRST(DOUBLE_FAULT); -#endif - - serial_early_puts("Board init flash\n"); - board_init_f(bootflag); -} - -int exception_init(void) -{ - bfin_write_EVT3(trap); - return 0; -} - -int irq_init(void) -{ -#ifdef SIC_IMASK0 - bfin_write_SIC_IMASK0(0); - bfin_write_SIC_IMASK1(0); -# ifdef SIC_IMASK2 - bfin_write_SIC_IMASK2(0); -# endif -#elif defined(SICA_IMASK0) - bfin_write_SICA_IMASK0(0); - bfin_write_SICA_IMASK1(0); -#else - bfin_write_SIC_IMASK(0); -#endif - bfin_write_EVT2(evt_default); /* NMI */ - bfin_write_EVT5(evt_default); /* hardware error */ - bfin_write_EVT6(evt_default); /* core timer */ - bfin_write_EVT7(evt_default); - bfin_write_EVT8(evt_default); - bfin_write_EVT9(evt_default); - bfin_write_EVT10(evt_default); - bfin_write_EVT11(evt_default); - bfin_write_EVT12(evt_default); - bfin_write_EVT13(evt_default); - bfin_write_EVT14(evt_default); - bfin_write_EVT15(evt_default); - bfin_write_ILAT(0); - CSYNC(); - /* enable hardware error irq */ - irq_flags = 0x3f; - local_irq_enable(); - return 0; -} diff --git a/cpu/blackfin/cpu.h b/cpu/blackfin/cpu.h deleted file mode 100644 index 0a13c28..0000000 --- a/cpu/blackfin/cpu.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * U-boot - cpu.h - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _CPU_H_ -#define _CPU_H_ - -#include <command.h> - -void board_reset(void) __attribute__((__weak__)); -void bfin_reset_or_hang(void) __attribute__((__noreturn__)); -void bfin_panic(struct pt_regs *reg); -void dump(struct pt_regs *regs); - -asmlinkage void trap(void); -asmlinkage void evt_default(void); - -#endif diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c deleted file mode 100644 index 5f80ad6..0000000 --- a/cpu/blackfin/initcode.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * initcode.c - Initialize the processor. This is usually entails things - * like external memory, voltage regulators, etc... Note that this file - * cannot make any function calls as it may be executed all by itself by - * the Blackfin's bootrom in LDR format. - * - * Copyright (c) 2004-2008 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#define BFIN_IN_INITCODE - -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mach-common/bits/bootrom.h> -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> - -#include "serial.h" - -__attribute__((always_inline)) -static inline void serial_init(void) -{ -#ifdef __ADSPBF54x__ -# ifdef BFIN_BOOT_UART_USE_RTS -# define BFIN_UART_USE_RTS 1 -# else -# define BFIN_UART_USE_RTS 0 -# endif - if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { - size_t i; - - /* force RTS rather than relying on auto RTS */ - bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) | FCPOL); - - /* Wait for the line to clear up. We cannot rely on UART - * registers as none of them reflect the status of the RSR. - * Instead, we'll sleep for ~10 bit times at 9600 baud. - * We can precalc things here by assuming boot values for - * PLL rather than loading registers and calculating. - * baud = SCLK / (16 ^ (1 - EDBO) * Divisor) - * EDB0 = 0 - * Divisor = (SCLK / baud) / 16 - * SCLK = baud * 16 * Divisor - * SCLK = (0x14 * CONFIG_CLKIN_HZ) / 5 - * CCLK = (16 * Divisor * 5) * (9600 / 10) - * In reality, this will probably be just about 1 second delay, - * so assuming 9600 baud is OK (both as a very low and too high - * speed as this will buffer things enough). - */ -#define _NUMBITS (10) /* how many bits to delay */ -#define _LOWBAUD (9600) /* low baud rate */ -#define _SCLK ((0x14 * CONFIG_CLKIN_HZ) / 5) /* SCLK based on PLL */ -#define _DIVISOR ((_SCLK / _LOWBAUD) / 16) /* UART DLL/DLH */ -#define _NUMINS (3) /* how many instructions in loop */ -#define _CCLK (((16 * _DIVISOR * 5) * (_LOWBAUD / _NUMBITS)) / _NUMINS) - i = _CCLK; - while (i--) - asm volatile("" : : : "memory"); - } -#endif - - if (BFIN_DEBUG_EARLY_SERIAL) { - int ucen = bfin_read16(&pUART->gctl) & UCEN; - serial_early_init(); - - /* If the UART is off, that means we need to program - * the baud rate ourselves initially. - */ - if (ucen != UCEN) - serial_early_set_baud(CONFIG_BAUDRATE); - } -} - -__attribute__((always_inline)) -static inline void serial_deinit(void) -{ -#ifdef __ADSPBF54x__ - if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { - /* clear forced RTS rather than relying on auto RTS */ - bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) & ~FCPOL); - } -#endif -} - -__attribute__((always_inline)) -static inline void serial_putc(char c) -{ - if (!BFIN_DEBUG_EARLY_SERIAL) - return; - - if (c == '\n') - serial_putc('\r'); - - bfin_write16(&pUART->thr, c); - - while (!(bfin_read16(&pUART->lsr) & TEMT)) - continue; -} - - -/* Max SCLK can be 133MHz ... dividing that by (2*4) gives - * us a freq of 16MHz for SPI which should generally be - * slow enough for the slow reads the bootrom uses. - */ -#if !defined(CONFIG_SPI_FLASH_SLOW_READ) && \ - ((defined(__ADSPBF52x__) && __SILICON_REVISION__ >= 2) || \ - (defined(__ADSPBF54x__) && __SILICON_REVISION__ >= 1)) -# define BOOTROM_SUPPORTS_SPI_FAST_READ 1 -#else -# define BOOTROM_SUPPORTS_SPI_FAST_READ 0 -#endif -#ifndef CONFIG_SPI_BAUD_INITBLOCK -# define CONFIG_SPI_BAUD_INITBLOCK (BOOTROM_SUPPORTS_SPI_FAST_READ ? 2 : 4) -#endif -#ifdef SPI0_BAUD -# define bfin_write_SPI_BAUD bfin_write_SPI0_BAUD -#endif - -/* PLL_DIV defines */ -#ifndef CONFIG_PLL_DIV_VAL -# if (CONFIG_CCLK_DIV == 1) -# define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -# elif (CONFIG_CCLK_DIV == 2) -# define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -# elif (CONFIG_CCLK_DIV == 4) -# define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -# elif (CONFIG_CCLK_DIV == 8) -# define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -# else -# define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -# endif -# define CONFIG_PLL_DIV_VAL (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV) -#endif - -#ifndef CONFIG_PLL_LOCKCNT_VAL -# define CONFIG_PLL_LOCKCNT_VAL 0x0300 -#endif - -#ifndef CONFIG_PLL_CTL_VAL -# define CONFIG_PLL_CTL_VAL (SPORT_HYST | (CONFIG_VCO_MULT << 9) | CONFIG_CLKIN_HALF) -#endif - -#ifndef CONFIG_EBIU_RSTCTL_VAL -# define CONFIG_EBIU_RSTCTL_VAL 0 /* only MDDRENABLE is useful */ -#endif -#if ((CONFIG_EBIU_RSTCTL_VAL & 0xFFFFFFC4) != 0) -# error invalid EBIU_RSTCTL value: must not set reserved bits -#endif - -#ifndef CONFIG_EBIU_MBSCTL_VAL -# define CONFIG_EBIU_MBSCTL_VAL 0 -#endif - -#if defined(CONFIG_EBIU_DDRQUE_VAL) && ((CONFIG_EBIU_DDRQUE_VAL & 0xFFFF8000) != 0) -# error invalid EBIU_DDRQUE value: must not set reserved bits -#endif - -/* Make sure our voltage value is sane so we don't blow up! */ -#ifndef CONFIG_VR_CTL_VAL -# define BFIN_CCLK ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_CCLK_DIV) -# if defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__) -# define CCLK_VLEV_120 400000000 -# define CCLK_VLEV_125 533000000 -# elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) -# define CCLK_VLEV_120 401000000 -# define CCLK_VLEV_125 401000000 -# elif defined(__ADSPBF561__) -# define CCLK_VLEV_120 300000000 -# define CCLK_VLEV_125 501000000 -# endif -# if BFIN_CCLK < CCLK_VLEV_120 -# define CONFIG_VR_CTL_VLEV VLEV_120 -# elif BFIN_CCLK < CCLK_VLEV_125 -# define CONFIG_VR_CTL_VLEV VLEV_125 -# else -# define CONFIG_VR_CTL_VLEV VLEV_130 -# endif -# if defined(__ADSPBF52x__) /* TBD; use default */ -# undef CONFIG_VR_CTL_VLEV -# define CONFIG_VR_CTL_VLEV VLEV_110 -# elif defined(__ADSPBF54x__) /* TBD; use default */ -# undef CONFIG_VR_CTL_VLEV -# define CONFIG_VR_CTL_VLEV VLEV_120 -# elif defined(__ADSPBF538__) || defined(__ADSPBF539__) /* TBD; use default */ -# undef CONFIG_VR_CTL_VLEV -# define CONFIG_VR_CTL_VLEV VLEV_125 -# endif - -# ifdef CONFIG_BFIN_MAC -# define CONFIG_VR_CTL_CLKBUF CLKBUFOE -# else -# define CONFIG_VR_CTL_CLKBUF 0 -# endif - -# if defined(__ADSPBF52x__) -# define CONFIG_VR_CTL_FREQ FREQ_1000 -# else -# define CONFIG_VR_CTL_FREQ (GAIN_20 | FREQ_1000) -# endif - -# define CONFIG_VR_CTL_VAL (CONFIG_VR_CTL_CLKBUF | CONFIG_VR_CTL_VLEV | CONFIG_VR_CTL_FREQ) -#endif - -/* some parts do not have an on-chip voltage regulator */ -#if defined(__ADSPBF51x__) -# define CONFIG_HAS_VR 0 -# undef CONFIG_VR_CTL_VAL -# define CONFIG_VR_CTL_VAL 0 -#else -# define CONFIG_HAS_VR 1 -#endif - -#if CONFIG_MEM_SIZE -#ifndef EBIU_RSTCTL -/* Blackfin with SDRAM */ -#ifndef CONFIG_EBIU_SDBCTL_VAL -# if CONFIG_MEM_SIZE == 16 -# define CONFIG_EBSZ_VAL EBSZ_16 -# elif CONFIG_MEM_SIZE == 32 -# define CONFIG_EBSZ_VAL EBSZ_32 -# elif CONFIG_MEM_SIZE == 64 -# define CONFIG_EBSZ_VAL EBSZ_64 -# elif CONFIG_MEM_SIZE == 128 -# define CONFIG_EBSZ_VAL EBSZ_128 -# elif CONFIG_MEM_SIZE == 256 -# define CONFIG_EBSZ_VAL EBSZ_256 -# elif CONFIG_MEM_SIZE == 512 -# define CONFIG_EBSZ_VAL EBSZ_512 -# else -# error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_SIZE -# endif -# if CONFIG_MEM_ADD_WDTH == 8 -# define CONFIG_EBCAW_VAL EBCAW_8 -# elif CONFIG_MEM_ADD_WDTH == 9 -# define CONFIG_EBCAW_VAL EBCAW_9 -# elif CONFIG_MEM_ADD_WDTH == 10 -# define CONFIG_EBCAW_VAL EBCAW_10 -# elif CONFIG_MEM_ADD_WDTH == 11 -# define CONFIG_EBCAW_VAL EBCAW_11 -# else -# error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_ADD_WDTH -# endif -# define CONFIG_EBIU_SDBCTL_VAL (CONFIG_EBCAW_VAL | CONFIG_EBSZ_VAL | EBE) -#endif -#endif -#endif - -/* Conflicting Column Address Widths Causes SDRAM Errors: - * EB2CAW and EB3CAW must be the same - */ -#if ANOMALY_05000362 -# if ((CONFIG_EBIU_SDBCTL_VAL & 0x30000000) >> 8) != (CONFIG_EBIU_SDBCTL_VAL & 0x00300000) -# error "Anomaly 05000362: EB2CAW and EB3CAW must be the same" -# endif -#endif - -__attribute__((always_inline)) static inline void -program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) -{ - serial_putc('a'); - - /* Save the clock pieces that are used in baud rate calculation */ - if (BFIN_DEBUG_EARLY_SERIAL || CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { - serial_putc('b'); - *sdivB = bfin_read_PLL_DIV() & 0xf; - *vcoB = (bfin_read_PLL_CTL() >> 9) & 0x3f; - *divB = serial_early_get_div(); - serial_putc('c'); - } - - serial_putc('d'); - -#ifdef CONFIG_HW_WATCHDOG -# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE -# define CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE 20000 -# endif - /* Program the watchdog with an initial timeout of ~20 seconds. - * Hopefully that should be long enough to load the u-boot LDR - * (from wherever) and then the common u-boot code can take over. - * In bypass mode, the start.S would have already set a much lower - * timeout, so don't clobber that. - */ - if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) { - serial_putc('e'); - bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE)); - bfin_write_WDOG_CTL(0); - serial_putc('f'); - } -#endif - - serial_putc('g'); - - /* Blackfin bootroms use the SPI slow read opcode instead of the SPI - * fast read, so we need to slow down the SPI clock a lot more during - * boot. Once we switch over to u-boot's SPI flash driver, we'll - * increase the speed appropriately. - */ - if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) { - serial_putc('h'); - if (BOOTROM_SUPPORTS_SPI_FAST_READ && CONFIG_SPI_BAUD_INITBLOCK < 4) - bs->dFlags |= BFLAG_FASTREAD; - bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK); - serial_putc('i'); - } - - serial_putc('j'); -} - -__attribute__((always_inline)) static inline bool -maybe_self_refresh(ADI_BOOT_DATA *bs) -{ - serial_putc('a'); - - if (!CONFIG_MEM_SIZE) - return false; - - /* If external memory is enabled, put it into self refresh first. */ -#ifdef EBIU_RSTCTL - if (bfin_read_EBIU_RSTCTL() & DDR_SRESET) { - serial_putc('b'); - bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | SRREQ); - return true; - } -#else - if (bfin_read_EBIU_SDBCTL() & EBE) { - serial_putc('b'); - bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS); - return true; - } -#endif - - serial_putc('c'); - - return false; -} - -__attribute__((always_inline)) static inline u16 -program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs) -{ - u16 vr_ctl; - - serial_putc('a'); - - vr_ctl = bfin_read_VR_CTL(); - - serial_putc('b'); - - /* If we're entering self refresh, make sure it has happened. */ - if (put_into_srfs) -#ifdef EBIU_RSTCTL - while (!(bfin_read_EBIU_RSTCTL() & SRACK)) -#else - while (!(bfin_read_EBIU_SDSTAT() & SDSRA)) -#endif - continue; - - serial_putc('c'); - - /* With newer bootroms, we use the helper function to set up - * the memory controller. Older bootroms lacks such helpers - * so we do it ourselves. - */ - if (!ANOMALY_05000386) { - serial_putc('d'); - - /* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */ - ADI_SYSCTRL_VALUES memory_settings; - uint32_t actions = SYSCTRL_WRITE | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT; - if (CONFIG_HAS_VR) { - actions |= SYSCTRL_VRCTL; - if (CONFIG_VR_CTL_VAL & FREQ_MASK) - actions |= SYSCTRL_INTVOLTAGE; - else - actions |= SYSCTRL_EXTVOLTAGE; - memory_settings.uwVrCtl = CONFIG_VR_CTL_VAL; - } else - actions |= SYSCTRL_EXTVOLTAGE; - memory_settings.uwPllCtl = CONFIG_PLL_CTL_VAL; - memory_settings.uwPllDiv = CONFIG_PLL_DIV_VAL; - memory_settings.uwPllLockCnt = CONFIG_PLL_LOCKCNT_VAL; -#if ANOMALY_05000432 - bfin_write_SIC_IWR1(0); -#endif - serial_putc('e'); - bfrom_SysControl(actions, &memory_settings, NULL); - serial_putc('f'); -#if ANOMALY_05000432 - bfin_write_SIC_IWR1(-1); -#endif -#if ANOMALY_05000171 - bfin_write_SICA_IWR0(-1); - bfin_write_SICA_IWR1(-1); -#endif - serial_putc('g'); - } else { - serial_putc('h'); - - /* Disable all peripheral wakeups except for the PLL event. */ -#ifdef SIC_IWR0 - bfin_write_SIC_IWR0(1); - bfin_write_SIC_IWR1(0); -# ifdef SIC_IWR2 - bfin_write_SIC_IWR2(0); -# endif -#elif defined(SICA_IWR0) - bfin_write_SICA_IWR0(1); - bfin_write_SICA_IWR1(0); -#else - bfin_write_SIC_IWR(1); -#endif - - serial_putc('i'); - - /* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */ - bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL); - - serial_putc('j'); - - /* Only reprogram when needed to avoid triggering unnecessary - * PLL relock sequences. - */ - if (vr_ctl != CONFIG_VR_CTL_VAL) { - serial_putc('?'); - bfin_write_VR_CTL(CONFIG_VR_CTL_VAL); - asm("idle;"); - serial_putc('!'); - } - - serial_putc('k'); - - bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL); - - serial_putc('l'); - - /* Only reprogram when needed to avoid triggering unnecessary - * PLL relock sequences. - */ - if (ANOMALY_05000242 || bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) { - serial_putc('?'); - bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL); - asm("idle;"); - serial_putc('!'); - } - - serial_putc('m'); - - /* Restore all peripheral wakeups. */ -#ifdef SIC_IWR0 - bfin_write_SIC_IWR0(-1); - bfin_write_SIC_IWR1(-1); -# ifdef SIC_IWR2 - bfin_write_SIC_IWR2(-1); -# endif -#elif defined(SICA_IWR0) - bfin_write_SICA_IWR0(-1); - bfin_write_SICA_IWR1(-1); -#else - bfin_write_SIC_IWR(-1); -#endif - - serial_putc('n'); - } - - serial_putc('o'); - - return vr_ctl; -} - -__attribute__((always_inline)) static inline void -update_serial_clocks(ADI_BOOT_DATA *bs, uint sdivB, uint divB, uint vcoB) -{ - serial_putc('a'); - - /* Since we've changed the SCLK above, we may need to update - * the UART divisors (UART baud rates are based on SCLK). - * Do the division by hand as there are no native instructions - * for dividing which means we'd generate a libgcc reference. - */ - if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { - serial_putc('b'); - unsigned int sdivR, vcoR; - sdivR = bfin_read_PLL_DIV() & 0xf; - vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f; - int dividend = sdivB * divB * vcoR; - int divisor = vcoB * sdivR; - unsigned int quotient; - for (quotient = 0; dividend > 0; ++quotient) - dividend -= divisor; - serial_early_put_div(quotient - ANOMALY_05000230); - serial_putc('c'); - } - - serial_putc('d'); -} - -__attribute__((always_inline)) static inline void -program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs) -{ - serial_putc('a'); - - if (!CONFIG_MEM_SIZE) - return; - - serial_putc('b'); - - /* Program the external memory controller before we come out of - * self-refresh. This only works with our SDRAM controller. - */ -#ifndef EBIU_RSTCTL -# ifdef CONFIG_EBIU_SDRRC_VAL - bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL); -# endif -# ifdef CONFIG_EBIU_SDBCTL_VAL - bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL); -# endif -# ifdef CONFIG_EBIU_SDGCTL_VAL - bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL); -# endif -#endif - - serial_putc('c'); - - /* Now that we've reprogrammed, take things out of self refresh. */ - if (put_into_srfs) -#ifdef EBIU_RSTCTL - bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ)); -#else - bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() & ~(SRFS)); -#endif - - serial_putc('d'); - - /* Our DDR controller sucks and cannot be programmed while in - * self-refresh. So we have to pull it out before programming. - */ -#ifdef EBIU_RSTCTL -# ifdef CONFIG_EBIU_RSTCTL_VAL - bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1 /*DDRSRESET*/ | CONFIG_EBIU_RSTCTL_VAL); -# endif -# ifdef CONFIG_EBIU_DDRCTL0_VAL - bfin_write_EBIU_DDRCTL0(CONFIG_EBIU_DDRCTL0_VAL); -# endif -# ifdef CONFIG_EBIU_DDRCTL1_VAL - bfin_write_EBIU_DDRCTL1(CONFIG_EBIU_DDRCTL1_VAL); -# endif -# ifdef CONFIG_EBIU_DDRCTL2_VAL - bfin_write_EBIU_DDRCTL2(CONFIG_EBIU_DDRCTL2_VAL); -# endif -# ifdef CONFIG_EBIU_DDRCTL3_VAL - /* default is disable, so don't need to force this */ - bfin_write_EBIU_DDRCTL3(CONFIG_EBIU_DDRCTL3_VAL); -# endif -# ifdef CONFIG_EBIU_DDRQUE_VAL - bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | CONFIG_EBIU_DDRQUE_VAL); -# endif -#endif - - serial_putc('e'); -} - -__attribute__((always_inline)) static inline void -check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs) -{ - serial_putc('a'); - - if (!CONFIG_MEM_SIZE) - return; - - serial_putc('b'); - - /* Are we coming out of hibernate (suspend to memory) ? - * The memory layout is: - * 0x0: hibernate magic for anomaly 307 (0xDEADBEEF) - * 0x4: return address - * 0x8: stack pointer - * - * SCKELOW is unreliable on older parts (anomaly 307) - */ - if (ANOMALY_05000307 || vr_ctl & 0x8000) { - uint32_t *hibernate_magic = 0; - __builtin_bfin_ssync(); /* make sure memory controller is done */ - if (hibernate_magic[0] == 0xDEADBEEF) { - serial_putc('c'); - bfin_write_EVT15(hibernate_magic[1]); - bfin_write_IMASK(EVT_IVG15); - __asm__ __volatile__ ( - /* load reti early to avoid anomaly 281 */ - "reti = %0;" - /* clear hibernate magic */ - "[%0] = %1;" - /* load stack pointer */ - "SP = [%0 + 8];" - /* lower ourselves from reset ivg to ivg15 */ - "raise 15;" - "rti;" - : - : "p"(hibernate_magic), "d"(0x2000 /* jump.s 0 */) - ); - } - serial_putc('d'); - } - - serial_putc('e'); -} - -__attribute__((always_inline)) static inline void -program_async_controller(ADI_BOOT_DATA *bs) -{ - serial_putc('a'); - - /* Program the async banks controller. */ - bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL); - bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL); - bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); - - serial_putc('b'); - - /* Not all parts have these additional MMRs. */ -#ifdef EBIU_MODE -# ifdef CONFIG_EBIU_MBSCTL_VAL - bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL); -# endif -# ifdef CONFIG_EBIU_MODE_VAL - bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL); -# endif -# ifdef CONFIG_EBIU_FCTL_VAL - bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL); -# endif -#endif - - serial_putc('c'); -} - -BOOTROM_CALLED_FUNC_ATTR -void initcode(ADI_BOOT_DATA *bs) -{ - ADI_BOOT_DATA bootstruct_scratch; - - serial_init(); - - serial_putc('A'); - - /* If the bootstruct is NULL, then it's because we're loading - * dynamically and not via LDR (bootrom). So set the struct to - * some scratch space. - */ - if (!bs) - bs = &bootstruct_scratch; - - serial_putc('B'); - bool put_into_srfs = maybe_self_refresh(bs); - - serial_putc('C'); - uint sdivB, divB, vcoB; - program_early_devices(bs, &sdivB, &divB, &vcoB); - - serial_putc('D'); - u16 vr_ctl = program_clocks(bs, put_into_srfs); - - serial_putc('E'); - update_serial_clocks(bs, sdivB, divB, vcoB); - - serial_putc('F'); - program_memory_controller(bs, put_into_srfs); - - serial_putc('G'); - check_hibernation(bs, vr_ctl, put_into_srfs); - - serial_putc('H'); - program_async_controller(bs); - -#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1 - serial_putc('I'); - /* tell the bootrom where our entry point is */ - if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) - bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE); -#endif - - serial_putc('>'); - serial_putc('\n'); - - serial_deinit(); -} diff --git a/cpu/blackfin/interrupt.S b/cpu/blackfin/interrupt.S deleted file mode 100644 index 69bba3f..0000000 --- a/cpu/blackfin/interrupt.S +++ /dev/null @@ -1,152 +0,0 @@ -/* - * interrupt.S - trampoline default exceptions/interrupts to C handlers - * - * Copyright (c) 2005-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. - */ - -#include <config.h> -#include <asm/blackfin.h> -#include <asm/entry.h> -#include <asm/ptrace.h> -#include <asm/deferred.h> -#include <asm/mach-common/bits/core.h> - -.text - -/* default entry point for exceptions */ -ENTRY(_trap) - CONFIG_BFIN_SCRATCH_REG = sp; - sp.l = LO(L1_SRAM_SCRATCH_END - 20); - sp.h = HI(L1_SRAM_SCRATCH_END - 20); - SAVE_ALL_SYS - - r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ - r1 = 3; /* EVT3 space */ - sp += -12; - call _trap_c; - sp += 12; - -#ifdef CONFIG_EXCEPTION_DEFER - CC = R0 == 0; - IF CC JUMP .Lexit_trap; - - /* To avoid double faults, lower our priority to IRQ5 */ - p4.l = lo(COREMMR_BASE); - p4.h = hi(COREMMR_BASE); - - r7.h = _exception_to_level5; - r7.l = _exception_to_level5; - [p4 + (EVT5 - COREMMR_BASE)] = r7; - - /* - * Save these registers, as they are only valid in exception context - * (where we are now - as soon as we defer to IRQ5, they can change) - */ - p5.l = _deferred_regs; - p5.h = _deferred_regs; - r6 = [p4 + (DCPLB_FAULT_ADDR - COREMMR_BASE)]; - [p5 + (deferred_regs_DCPLB_FAULT_ADDR * 4)] = r6; - - r6 = [p4 + (ICPLB_FAULT_ADDR - COREMMR_BASE)]; - [p5 + (deferred_regs_ICPLB_FAULT_ADDR * 4)] = r6; - - /* Save the state of single stepping */ - r6 = SYSCFG; - [p5 + (deferred_regs_SYSCFG * 4)] = r6; - /* Clear it while we handle the exception in IRQ5 mode - * RESTORE_ALL_SYS will load it, so all we need to do is store it - * in the right place - */ - BITCLR(r6, SYSCFG_SSSTEP_P); - [SP + PT_SYSCFG] = r6; - - /* Since we are going to clobber RETX, we need to save it */ - r6 = retx; - [p5 + (deferred_regs_retx * 4)] = r6; - - /* Save the current IMASK, since we change in order to jump to level 5 */ - cli r6; - [p5 + (deferred_regs_IMASK * 4)] = r6; - - /* Disable all interrupts, but make sure level 5 is enabled so - * we can switch to that level. - */ - r6 = 0x3f; - sti r6; - - /* Clobber RETX so we don't end up back at a faulting instruction */ - [sp + PT_RETX] = r7; - - /* In case interrupts are disabled IPEND[4] (global interrupt disable bit) - * clear it (re-enabling interrupts again) by the special sequence of pushing - * RETI onto the stack. This way we can lower ourselves to IVG5 even if the - * exception was taken after the interrupt handler was called but before it - * got a chance to enable global interrupts itself. - */ - [--sp] = reti; - sp += 4; - - RAISE 5; -.Lexit_trap: -#endif - -#if ANOMALY_05000257 - R7 = LC0; - LC0 = R7; - R7 = LC1; - LC1 = R7; -#endif - - RESTORE_ALL_SYS - sp = CONFIG_BFIN_SCRATCH_REG; - rtx; -ENDPROC(_trap) - -#ifdef CONFIG_EXCEPTION_DEFER -/* Deferred (IRQ5) exceptions */ -ENTRY(_exception_to_level5) - SAVE_ALL_SYS - - /* Now we have to fix things up */ - p4.l = lo(EVT5); - p4.h = hi(EVT5); - r0.l = _evt_default; - r0.h = _evt_default; - [p4] = r0; - csync; - - p4.l = _deferred_regs; - p4.h = _deferred_regs; - r0 = [p4 + (deferred_regs_retx * 4)]; - [sp + PT_PC] = r0; - - r0 = [p4 + (deferred_regs_SYSCFG * 4)]; - [sp + PT_SYSCFG] = r0; - - r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ - r1 = 5; /* EVT5 space */ - sp += -12; - call _trap_c; - sp += 12; - - /* Restore IMASK */ - r0 = [p4 + (deferred_regs_IMASK * 4)]; - sti r0; - - RESTORE_ALL_SYS - - rti; -ENDPROC(_exception_to_level5) -#endif - -/* default entry point for interrupts */ -ENTRY(_evt_default) - SAVE_ALL_SYS - r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ - sp += -12; - call _bfin_panic; - sp += 12; - RESTORE_ALL_SYS - rti; -ENDPROC(_evt_default) diff --git a/cpu/blackfin/interrupts.c b/cpu/blackfin/interrupts.c deleted file mode 100644 index 54a67b4..0000000 --- a/cpu/blackfin/interrupts.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * U-boot - interrupts.c Interrupt related routines - * - * Copyright (c) 2005-2008 Analog Devices Inc. - * - * This file is based on interrupts.c - * Copyright 1996 Roman Zippel - * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> - * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> - * Copyright 2003 Metrowerks/Motorola - * Copyright 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <config.h> -#include <watchdog.h> -#include <asm/blackfin.h> -#include "cpu.h" - -static ulong timestamp; -static ulong last_time; -static int int_flag; - -int irq_flags; /* needed by asm-blackfin/system.h */ - -/* Functions just to satisfy the linker */ - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On Blackfin it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On Blackfin it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - ulong tbclk; - - tbclk = CONFIG_SYS_HZ; - return tbclk; -} - -void enable_interrupts(void) -{ - local_irq_restore(int_flag); -} - -int disable_interrupts(void) -{ - local_irq_save(int_flag); - return 1; -} - -void __udelay(unsigned long usec) -{ - unsigned long delay, start, stop; - unsigned long cclk; - cclk = (CONFIG_CCLK_HZ); - - while (usec > 1) { - WATCHDOG_RESET(); - - /* - * how many clock ticks to delay? - * - request(in useconds) * clock_ticks(Hz) / useconds/second - */ - if (usec < 1000) { - delay = (usec * (cclk / 244)) >> 12; - usec = 0; - } else { - delay = (1000 * (cclk / 244)) >> 12; - usec -= 1000; - } - - asm volatile (" %0 = CYCLES;" : "=r" (start)); - do { - asm volatile (" %0 = CYCLES; " : "=r" (stop)); - } while (stop - start < delay); - } - - return; -} - -#define MAX_TIM_LOAD 0xFFFFFFFF -int timer_init(void) -{ - bfin_write_TCNTL(0x1); - CSYNC(); - bfin_write_TSCALE(0x0); - bfin_write_TCOUNT(MAX_TIM_LOAD); - bfin_write_TPERIOD(MAX_TIM_LOAD); - bfin_write_TCNTL(0x7); - CSYNC(); - - timestamp = 0; - last_time = 0; - - return 0; -} - -/* - * Any network command or flash - * command is started get_timer shall - * be called before TCOUNT gets reset, - * to implement the accurate timeouts. - * - * How ever milliconds doesn't return - * the number that has been elapsed from - * the last reset. - * - * As get_timer is used in the u-boot - * only for timeouts this should be - * sufficient - */ -ulong get_timer(ulong base) -{ - ulong milisec; - - /* Number of clocks elapsed */ - ulong clocks = (MAX_TIM_LOAD - bfin_read_TCOUNT()); - - /* - * Find if the TCOUNT is reset - * timestamp gives the number of times - * TCOUNT got reset - */ - if (clocks < last_time) - timestamp++; - last_time = clocks; - - /* Get the number of milliseconds */ - milisec = clocks / (CONFIG_CCLK_HZ / 1000); - - /* - * Find the number of millisonds that - * got elapsed before this TCOUNT cycle - */ - milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000)); - - return (milisec - base); -} - -void reset_timer(void) -{ - timer_init(); -} diff --git a/cpu/blackfin/jtag-console.c b/cpu/blackfin/jtag-console.c deleted file mode 100644 index 1cd619f..0000000 --- a/cpu/blackfin/jtag-console.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * jtag-console.c - console driver over Blackfin JTAG - * - * Copyright (c) 2008 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <stdio_dev.h> -#include <asm/blackfin.h> - -#ifndef CONFIG_JTAG_CONSOLE_TIMEOUT -# define CONFIG_JTAG_CONSOLE_TIMEOUT 500 -#endif - -/* The Blackfin tends to be much much faster than the JTAG hardware. */ -static void jtag_write_emudat(uint32_t emudat) -{ - static bool overflowed = false; - ulong timeout = get_timer(0) + CONFIG_JTAG_CONSOLE_TIMEOUT; - while (bfin_read_DBGSTAT() & 0x1) { - if (overflowed) - return; - if (timeout < get_timer(0)) - overflowed = true; - } - overflowed = false; - __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); -} -/* Transmit a buffer. The format is: - * [32bit length][actual data] - */ -static void jtag_send(const char *c, uint32_t len) -{ - uint32_t i; - - if (len == 0) - return; - - /* First send the length */ - jtag_write_emudat(len); - - /* Then send the data */ - for (i = 0; i < len; i += 4) - jtag_write_emudat((c[i] << 0) | (c[i+1] << 8) | (c[i+2] << 16) | (c[i+3] << 24)); -} -static void jtag_putc(const char c) -{ - jtag_send(&c, 1); -} -static void jtag_puts(const char *s) -{ - jtag_send(s, strlen(s)); -} - -static size_t inbound_len, leftovers_len; - -/* Lower layers want to know when jtag has data */ -static int jtag_tstc_dbg(void) -{ - return (bfin_read_DBGSTAT() & 0x2); -} - -/* Higher layers want to know when any data is available */ -static int jtag_tstc(void) -{ - return jtag_tstc_dbg() || leftovers_len; -} - -/* Receive a buffer. The format is: - * [32bit length][actual data] - */ -static uint32_t leftovers; -static int jtag_getc(void) -{ - int ret; - uint32_t emudat; - - /* see if any data is left over */ - if (leftovers_len) { - --leftovers_len; - ret = leftovers & 0xff; - leftovers >>= 8; - return ret; - } - - /* wait for new data ! */ - while (!jtag_tstc_dbg()) - continue; - __asm__("%0 = emudat;" : "=d"(emudat)); - - if (inbound_len == 0) { - /* grab the length */ - inbound_len = emudat; - } else { - /* store the bytes */ - leftovers_len = min(4, inbound_len); - inbound_len -= leftovers_len; - leftovers = emudat; - } - - return jtag_getc(); -} - -int drv_jtag_console_init(void) -{ - struct stdio_dev dev; - int ret; - - memset(&dev, 0x00, sizeof(dev)); - strcpy(dev.name, "jtag"); - dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM; - dev.putc = jtag_putc; - dev.puts = jtag_puts; - dev.tstc = jtag_tstc; - dev.getc = jtag_getc; - - ret = stdio_register(&dev); - return (ret == 0 ? 1 : ret); -} - -#ifdef CONFIG_UART_CONSOLE_IS_JTAG -/* Since the JTAG is always available (at power on), allow it to fake a UART */ -void serial_set_baud(uint32_t baud) {} -void serial_setbrg(void) {} -int serial_init(void) { return 0; } -void serial_putc(const char c) __attribute__((alias("jtag_putc"))); -void serial_puts(const char *s) __attribute__((alias("jtag_puts"))); -int serial_tstc(void) __attribute__((alias("jtag_tstc"))); -int serial_getc(void) __attribute__((alias("jtag_getc"))); -#endif diff --git a/cpu/blackfin/os_log.c b/cpu/blackfin/os_log.c deleted file mode 100644 index e1c8e29..0000000 --- a/cpu/blackfin/os_log.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * functions for handling OS log buffer - * - * Copyright (c) 2009 Analog Devices Inc. - * - * Licensed under the 2-clause BSD. - */ - -#include <common.h> - -#define OS_LOG_MAGIC 0xDEADBEEF -#define OS_LOG_MAGIC_ADDR ((unsigned long *)0x4f0) -#define OS_LOG_PTR_ADDR ((char **)0x4f4) - -bool bfin_os_log_check(void) -{ - if (*OS_LOG_MAGIC_ADDR != OS_LOG_MAGIC) - return false; - *OS_LOG_MAGIC_ADDR = 0; - return true; -} - -void bfin_os_log_dump(void) -{ - char *log = *OS_LOG_PTR_ADDR; - while (*log) { - puts(log); - log += strlen(log) + 1; - } -} diff --git a/cpu/blackfin/reset.c b/cpu/blackfin/reset.c deleted file mode 100644 index e3be740..0000000 --- a/cpu/blackfin/reset.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * reset.c - logic for resetting the cpu - * - * Copyright (c) 2005-2008 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <command.h> -#include <asm/blackfin.h> -#include "cpu.h" - -/* A system soft reset makes external memory unusable so force - * this function into L1. We use the compiler ssync here rather - * than SSYNC() because it's safe (no interrupts and such) and - * we save some L1. We do not need to force sanity in the SYSCR - * register as the BMODE selection bit is cleared by the soft - * reset while the Core B bit (on dual core parts) is cleared by - * the core reset. - */ -__attribute__ ((__l1_text__, __noreturn__)) -static void bfin_reset(void) -{ - /* Wait for completion of "system" events such as cache line - * line fills so that we avoid infinite stalls later on as - * much as possible. This code is in L1, so it won't trigger - * any such event after this point in time. - */ - __builtin_bfin_ssync(); - - /* The bootrom checks to see how it was reset and will - * automatically perform a software reset for us when - * it starts executing after the core reset. - */ - if (ANOMALY_05000353 || ANOMALY_05000386) { - /* Initiate System software reset. */ - bfin_write_SWRST(0x7); - - /* Due to the way reset is handled in the hardware, we need - * to delay for 10 SCLKS. The only reliable way to do this is - * to calculate the CCLK/SCLK ratio and multiply 10. For now, - * we'll assume worse case which is a 1:15 ratio. - */ - asm( - "LSETUP (1f, 1f) LC0 = %0\n" - "1: nop;" - : - : "a" (15 * 10) - : "LC0", "LB0", "LT0" - ); - - /* Clear System software reset */ - bfin_write_SWRST(0); - - /* The BF526 ROM will crash during reset */ -#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__) - bfin_read_SWRST(); -#endif - - /* Wait for the SWRST write to complete. Cannot rely on SSYNC - * though as the System state is all reset now. - */ - asm( - "LSETUP (1f, 1f) LC1 = %0\n" - "1: nop;" - : - : "a" (15 * 1) - : "LC1", "LB1", "LT1" - ); - } - - while (1) - /* Issue core reset */ - asm("raise 1"); -} - -/* We need to trampoline ourselves up into L1 since our linker - * does not have relaxtion support and will only generate a - * PC relative call with a 25 bit immediate. This is not enough - * to get us from the top of SDRAM into L1. - */ -__attribute__ ((__noreturn__)) -static inline void bfin_reset_trampoline(void) -{ - if (board_reset) - board_reset(); - while (1) - asm("jump (%0);" : : "a" (bfin_reset)); -} - -__attribute__ ((__noreturn__)) -void bfin_reset_or_hang(void) -{ -#ifdef CONFIG_PANIC_HANG - hang(); -#else - bfin_reset_trampoline(); -#endif -} - -int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - bfin_reset_trampoline(); - return 0; -} diff --git a/cpu/blackfin/serial.c b/cpu/blackfin/serial.c deleted file mode 100644 index 901cb97..0000000 --- a/cpu/blackfin/serial.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * U-boot - serial.c Blackfin Serial Driver - * - * Copyright (c) 2005-2008 Analog Devices Inc. - * - * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) - * - * Based heavily on: - * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. - * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> - * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> - * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> - * - * Based on code from 68328 version serial driver imlpementation which was: - * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Licensed under the GPL-2 or later. - */ - -/* Anomaly notes: - * 05000086 - we don't support autobaud - * 05000099 - we only use DR bit, so losing others is not a problem - * 05000100 - we don't use the UART_IIR register - * 05000215 - we poll the uart (no dma/interrupts) - * 05000225 - no workaround possible, but this shouldnt cause errors ... - * 05000230 - we tweak the baud rate calculation slightly - * 05000231 - we always use 1 stop bit - * 05000309 - we always enable the uart before we modify it in anyway - * 05000350 - we always enable the uart regardless of boot mode - * 05000363 - we don't support break signals, so don't generate one - */ - -#include <common.h> -#include <watchdog.h> -#include <asm/blackfin.h> -#include <asm/mach-common/bits/uart.h> - -#ifdef CONFIG_UART_CONSOLE - -#include "serial.h" - -#ifdef CONFIG_DEBUG_SERIAL -uint16_t cached_lsr[256]; -uint16_t cached_rbr[256]; -size_t cache_count; - -/* The LSR is read-to-clear on some parts, so we have to make sure status - * bits aren't inadvertently lost when doing various tests. This also - * works around anomaly 05000099 at the same time by keeping a cumulative - * tally of all the status bits. - */ -static uint16_t uart_lsr_save; -static uint16_t uart_lsr_read(void) -{ - uint16_t lsr = bfin_read16(&pUART->lsr); - uart_lsr_save |= (lsr & (OE|PE|FE|BI)); - return lsr | uart_lsr_save; -} -/* Just do the clear for everyone since it can't hurt. */ -static void uart_lsr_clear(void) -{ - uart_lsr_save = 0; - bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1); -} -#else -/* When debugging is disabled, we only care about the DR bit, so if other - * bits get set/cleared, we don't really care since we don't read them - * anyways (and thus anomaly 05000099 is irrelevant). - */ -static uint16_t uart_lsr_read(void) -{ - return bfin_read16(&pUART->lsr); -} -static void uart_lsr_clear(void) -{ - bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1); -} -#endif - -/* Symbol for our assembly to call. */ -void serial_set_baud(uint32_t baud) -{ - serial_early_set_baud(baud); -} - -/* Symbol for common u-boot code to call. - * Setup the baudrate (brg: baudrate generator). - */ -void serial_setbrg(void) -{ - DECLARE_GLOBAL_DATA_PTR; - serial_set_baud(gd->baudrate); -} - -/* Symbol for our assembly to call. */ -void serial_initialize(void) -{ - serial_early_init(); -} - -/* Symbol for common u-boot code to call. */ -int serial_init(void) -{ - serial_initialize(); - serial_setbrg(); - uart_lsr_clear(); -#ifdef CONFIG_DEBUG_SERIAL - cache_count = 0; - memset(cached_lsr, 0x00, sizeof(cached_lsr)); - memset(cached_rbr, 0x00, sizeof(cached_rbr)); -#endif - return 0; -} - -void serial_putc(const char c) -{ - /* send a \r for compatibility */ - if (c == '\n') - serial_putc('\r'); - - WATCHDOG_RESET(); - - /* wait for the hardware fifo to clear up */ - while (!(uart_lsr_read() & THRE)) - continue; - - /* queue the character for transmission */ - bfin_write16(&pUART->thr, c); - SSYNC(); - - WATCHDOG_RESET(); -} - -int serial_tstc(void) -{ - WATCHDOG_RESET(); - return (uart_lsr_read() & DR) ? 1 : 0; -} - -int serial_getc(void) -{ - uint16_t uart_rbr_val; - - /* wait for data ! */ - while (!serial_tstc()) - continue; - - /* grab the new byte */ - uart_rbr_val = bfin_read16(&pUART->rbr); - -#ifdef CONFIG_DEBUG_SERIAL - /* grab & clear the LSR */ - uint16_t uart_lsr_val = uart_lsr_read(); - - cached_lsr[cache_count] = uart_lsr_val; - cached_rbr[cache_count] = uart_rbr_val; - cache_count = (cache_count + 1) % ARRAY_SIZE(cached_lsr); - - if (uart_lsr_val & (OE|PE|FE|BI)) { - uint16_t dll, dlh; - printf("\n[SERIAL ERROR]\n"); - ACCESS_LATCH(); - dll = bfin_read16(&pUART->dll); - dlh = bfin_read16(&pUART->dlh); - ACCESS_PORT_IER(); - printf("\tDLL=0x%x DLH=0x%x\n", dll, dlh); - do { - --cache_count; - printf("\t%3i: RBR=0x%02x LSR=0x%02x\n", cache_count, - cached_rbr[cache_count], cached_lsr[cache_count]); - } while (cache_count > 0); - return -1; - } -#endif - uart_lsr_clear(); - - return uart_rbr_val; -} - -void serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - -#endif diff --git a/cpu/blackfin/serial.h b/cpu/blackfin/serial.h deleted file mode 100644 index 5f9be86..0000000 --- a/cpu/blackfin/serial.h +++ /dev/null @@ -1,263 +0,0 @@ -/* - * serial.h - common serial defines for early debug and serial driver. - * any functions defined here must be always_inline since - * initcode cannot have function calls. - * - * Copyright (c) 2004-2007 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __BFIN_CPU_SERIAL_H__ -#define __BFIN_CPU_SERIAL_H__ - -#include <asm/blackfin.h> -#include <asm/mach-common/bits/uart.h> - -#ifndef CONFIG_UART_CONSOLE -# define CONFIG_UART_CONSOLE 0 -#endif - -#ifdef CONFIG_DEBUG_EARLY_SERIAL -# define BFIN_DEBUG_EARLY_SERIAL 1 -#else -# define BFIN_DEBUG_EARLY_SERIAL 0 -#endif - -#ifndef __ASSEMBLY__ - -#define LOB(x) ((x) & 0xFF) -#define HIB(x) (((x) >> 8) & 0xFF) - -/* - * All Blackfin system MMRs are padded to 32bits even if the register - * itself is only 16bits. So use a helper macro to streamline this. - */ -#define __BFP(m) u16 m; u16 __pad_##m -struct bfin_mmr_serial { -#ifdef __ADSPBF54x__ - __BFP(dll); - __BFP(dlh); - __BFP(gctl); - __BFP(lcr); - __BFP(mcr); - __BFP(lsr); - __BFP(msr); - __BFP(scr); - __BFP(ier_set); - __BFP(ier_clear); - __BFP(thr); - __BFP(rbr); -#else - union { - u16 dll; - u16 thr; - const u16 rbr; - }; - const u16 __spad0; - union { - u16 dlh; - u16 ier; - }; - const u16 __spad1; - const __BFP(iir); - __BFP(lcr); - __BFP(mcr); - __BFP(lsr); - __BFP(msr); - __BFP(scr); - const u32 __spad2; - __BFP(gctl); -#endif -}; -#undef __BFP - -#ifndef UART_LSR -# if (CONFIG_UART_CONSOLE == 3) -# define UART_BASE UART3_DLL -# elif (CONFIG_UART_CONSOLE == 2) -# define UART_BASE UART2_DLL -# elif (CONFIG_UART_CONSOLE == 1) -# define UART_BASE UART1_DLL -# elif (CONFIG_UART_CONSOLE == 0) -# define UART_BASE UART0_DLL -# endif -#else -# if CONFIG_UART_CONSOLE != 0 -# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART -# endif -# define UART_BASE UART_DLL -#endif -#define pUART ((volatile struct bfin_mmr_serial *)UART_BASE) - -#ifdef __ADSPBF54x__ -# define ACCESS_LATCH() -# define ACCESS_PORT_IER() -#else -# define ACCESS_LATCH() \ - bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) | DLAB) -# define ACCESS_PORT_IER() \ - bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) & ~DLAB) -#endif - -__attribute__((always_inline)) -static inline void serial_do_portmux(void) -{ -#if defined(__ADSPBF51x__) -# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \ - bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_2 | PORT_x_MUX_##mux_rx##_FUNC_2); \ - bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); - switch (CONFIG_UART_CONSOLE) { - case 0: DO_MUX(G, 5, 5, 9, 10); break; /* Port G; mux 5; PG9 and PG10 */ - case 1: DO_MUX(F, 2, 3, 14, 15); break; /* Port H; mux 2/3; PH14 and PH15 */ - } - SSYNC(); -#elif defined(__ADSPBF52x__) -# define DO_MUX(port, mux, tx, rx) \ - bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_3); \ - bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); - switch (CONFIG_UART_CONSOLE) { - case 0: DO_MUX(G, 2, 7, 8); break; /* Port G; mux 2; PG2 and PG8 */ - case 1: DO_MUX(F, 5, 14, 15); break; /* Port F; mux 5; PF14 and PF15 */ - } - SSYNC(); -#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) -# define DO_MUX(func, tx, rx) \ - bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~(func)); \ - bfin_write_PORTF_FER(bfin_read_PORTF_FER() | PF##tx | PF##rx); - switch (CONFIG_UART_CONSOLE) { - case 0: DO_MUX(PFDE, 0, 1); break; - case 1: DO_MUX(PFTE, 2, 3); break; - } - SSYNC(); -#elif defined(__ADSPBF54x__) -# define DO_MUX(port, tx, rx) \ - bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##tx##_MASK | PORT_x_MUX_##rx##_MASK)) | PORT_x_MUX_##tx##_FUNC_1 | PORT_x_MUX_##rx##_FUNC_1); \ - bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); - switch (CONFIG_UART_CONSOLE) { - case 0: DO_MUX(E, 7, 8); break; /* Port E; PE7 and PE8 */ - case 1: DO_MUX(H, 0, 1); break; /* Port H; PH0 and PH1 */ - case 2: DO_MUX(B, 4, 5); break; /* Port B; PB4 and PB5 */ - case 3: DO_MUX(B, 6, 7); break; /* Port B; PB6 and PB7 */ - } - SSYNC(); -#endif -} - -__attribute__((always_inline)) -static inline void serial_early_init(void) -{ - /* handle portmux crap on different Blackfins */ - serial_do_portmux(); - - /* always enable UART -- avoids anomalies 05000309 and 05000350 */ - bfin_write16(&pUART->gctl, UCEN); - - /* Set LCR to Word Lengh 8-bit word select */ - bfin_write16(&pUART->lcr, WLS_8); - - SSYNC(); -} - -__attribute__((always_inline)) -static inline void serial_early_put_div(uint16_t divisor) -{ - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH(); - SSYNC(); - - /* Program the divisor to get the baud rate we want */ - bfin_write16(&pUART->dll, LOB(divisor)); - bfin_write16(&pUART->dlh, HIB(divisor)); - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER(); - SSYNC(); -} - -__attribute__((always_inline)) -static inline uint16_t serial_early_get_div(void) -{ - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH(); - SSYNC(); - - uint8_t dll = bfin_read16(&pUART->dll); - uint8_t dlh = bfin_read16(&pUART->dlh); - uint16_t divisor = (dlh << 8) | dll; - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER(); - SSYNC(); - - return divisor; -} - -/* We cannot use get_sclk() early on as it uses caches in external memory */ -#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL) -# define get_sclk() (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV) -#endif - -__attribute__((always_inline)) -static inline void serial_early_set_baud(uint32_t baud) -{ - /* Translate from baud into divisor in terms of SCLK. The - * weird multiplication is to make sure we over sample just - * a little rather than under sample the incoming signals. - */ - serial_early_put_div((get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230); -} - -#ifndef BFIN_IN_INITCODE -__attribute__((always_inline)) -static inline void serial_early_puts(const char *s) -{ - if (BFIN_DEBUG_EARLY_SERIAL) { - serial_puts("Early: "); - serial_puts(s); - } -} -#endif - -#else - -.macro serial_early_init -#ifdef CONFIG_DEBUG_EARLY_SERIAL - call _serial_initialize; -#endif -.endm - -.macro serial_early_set_baud -#ifdef CONFIG_DEBUG_EARLY_SERIAL - R0.L = LO(CONFIG_BAUDRATE); - R0.H = HI(CONFIG_BAUDRATE); - call _serial_set_baud; -#endif -.endm - -/* Since we embed the string right into our .text section, we need - * to find its address. We do this by getting our PC and adding 2 - * bytes (which is the length of the jump instruction). Then we - * pass this address to serial_puts(). - */ -#ifdef CONFIG_DEBUG_EARLY_SERIAL -# define serial_early_puts(str) \ - call _get_pc; \ - jump 1f; \ - .ascii "Early:"; \ - .ascii __FILE__; \ - .ascii ": "; \ - .ascii str; \ - .asciz "\n"; \ - .align 4; \ -1: \ - R0 += 2; \ - call _serial_puts; -#else -# define serial_early_puts(str) -#endif - -#endif - -#endif diff --git a/cpu/blackfin/start.S b/cpu/blackfin/start.S deleted file mode 100644 index 7a3abba..0000000 --- a/cpu/blackfin/start.S +++ /dev/null @@ -1,238 +0,0 @@ -/* - * U-boot - start.S Startup file for Blackfin u-boot - * - * Copyright (c) 2005-2008 Analog Devices Inc. - * - * This file is based on head.S - * Copyright (c) 2003 Metrowerks/Motorola - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * (c) 1995, Dionne & Associates - * (c) 1995, DKG Display Tech. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <config.h> -#include <asm/blackfin.h> -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/dma.h> -#include <asm/mach-common/bits/pll.h> - -#include "serial.h" - -/* It may seem odd that we make calls to functions even though we haven't - * relocated ourselves yet out of {flash,ram,wherever}. This is OK because - * the "call" instruction in the Blackfin architecture is actually PC - * relative. So we can call functions all we want and not worry about them - * not being relocated yet. - */ - -.text -ENTRY(_start) - - /* Set our initial stack to L1 scratch space */ - sp.l = LO(L1_SRAM_SCRATCH_END - 20); - sp.h = HI(L1_SRAM_SCRATCH_END - 20); - -#ifdef CONFIG_HW_WATCHDOG -# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START -# define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000 -# endif - /* Program the watchdog with an initial timeout of ~5 seconds. - * That should be long enough to bootstrap ourselves up and - * then the common u-boot code can take over. - */ - P0.L = LO(WDOG_CNT); - P0.H = HI(WDOG_CNT); - R0.L = 0; - R0.H = HI(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_START)); - [P0] = R0; - /* fire up the watchdog - R0.L above needs to be 0x0000 */ - W[P0 + (WDOG_CTL - WDOG_CNT)] = R0; -#endif - - /* Turn on the serial for debugging the init process */ - serial_early_init - serial_early_set_baud - - serial_early_puts("Init Registers"); - - /* Disable self-nested interrupts and enable CYCLES for udelay() */ - R0 = CCEN | 0x30; - SYSCFG = R0; - - /* Zero out registers required by Blackfin ABI. - * http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface - */ - r1 = 0 (x); - /* Disable circular buffers */ - l0 = r1; - l1 = r1; - l2 = r1; - l3 = r1; - /* Disable hardware loops in case we were started by 'go' */ - lc0 = r1; - lc1 = r1; - - /* Save RETX so we can pass it while booting Linux */ - r7 = RETX; - -#if CONFIG_MEM_SIZE - /* Figure out where we are currently executing so that we can decide - * how to best reprogram and relocate things. We'll pass below: - * R4: load address of _start - * R5: current (not load) address of _start - */ - serial_early_puts("Find ourselves"); - - call _get_pc; -.Loffset: - r1.l = .Loffset; - r1.h = .Loffset; - r4.l = _start; - r4.h = _start; - r3 = r1 - r4; - r5 = r0 - r3; - - /* Inform upper layers if we had to do the relocation ourselves. - * This allows us to detect whether we were loaded by 'go 0x1000' - * or by the bootrom from an LDR. "R6" is "loaded_from_ldr". - */ - r6 = 1 (x); - cc = r4 == r5; - if cc jump .Lnorelocate; - r6 = 0 (x); - - /* In bypass mode, we don't have an LDR with an init block - * so we need to explicitly call it ourselves. This will - * reprogram our clocks, memory, and setup our async banks. - */ - serial_early_puts("Program Clocks"); - - /* if we're executing >=0x20000000, then we dont need to dma */ - r3 = 0x0; - r3.h = 0x2000; - cc = r5 < r3 (iu); - if cc jump .Ldma_and_reprogram; -#else - r6 = 1 (x); /* fake loaded_from_ldr = 1 */ -#endif - r0 = 0 (x); /* set bootstruct to NULL */ - call _initcode; - jump .Lprogrammed; - - /* we're sitting in external memory, so dma into L1 and reprogram */ -.Ldma_and_reprogram: - r0.l = LO(L1_INST_SRAM); - r0.h = HI(L1_INST_SRAM); - r1.l = __initcode_lma; - r1.h = __initcode_lma; - r2.l = __initcode_len; - r2.h = __initcode_len; - r1 = r1 - r4; /* convert r1 from load address of initcode ... */ - r1 = r1 + r5; /* ... to current (not load) address of initcode */ - p3 = r0; - call _dma_memcpy_nocache; - r0 = 0 (x); /* set bootstruct to NULL */ - call (p3); - - /* Since we reprogrammed SCLK, we need to update the serial divisor */ -.Lprogrammed: - serial_early_set_baud - -#if CONFIG_MEM_SIZE - /* Relocate from wherever we are (FLASH/RAM/etc...) to the hardcoded - * monitor location in the end of RAM. We know that memcpy() only - * uses registers, so it is safe to call here. Note that this only - * copies to external memory ... we do not start executing out of - * it yet (see "lower to 15" below). - */ - serial_early_puts("Relocate"); - r0 = r4; - r1 = r5; - r2.l = LO(CONFIG_SYS_MONITOR_LEN); - r2.h = HI(CONFIG_SYS_MONITOR_LEN); - call _memcpy_ASM; -#endif - - /* Initialize BSS section ... we know that memset() does not - * use the BSS, so it is safe to call here. The bootrom LDR - * takes care of clearing things for us. - */ - serial_early_puts("Zero BSS"); - r0.l = __bss_vma; - r0.h = __bss_vma; - r1 = 0 (x); - r2.l = __bss_len; - r2.h = __bss_len; - call _memset; - -.Lnorelocate: - - /* Setup the actual stack in external memory */ - sp.h = HI(CONFIG_STACKBASE); - sp.l = LO(CONFIG_STACKBASE); - fp = sp; - - /* Now lower ourselves from the highest interrupt level to - * the lowest. We do this by masking all interrupts but 15, - * setting the 15 handler to ".Lenable_nested", raising the 15 - * interrupt, and then returning from the highest interrupt - * level to the dummy "jump" until the interrupt controller - * services the pending 15 interrupt. If executing out of - * flash, these steps also changes the code flow from flash - * to external memory. - */ - serial_early_puts("Lower to 15"); - r0 = r7; - r1 = r6; - p0.l = LO(EVT15); - p0.h = HI(EVT15); - p1.l = .Lenable_nested; - p1.h = .Lenable_nested; - [p0] = p1; - r7 = EVT_IVG15 (z); - sti r7; - raise 15; - p4.l = .LWAIT_HERE; - p4.h = .LWAIT_HERE; - reti = p4; - rti; - - /* Enable nested interrupts before continuing with cpu init */ -.Lenable_nested: - cli r7; - [--sp] = reti; - jump.l _cpu_init_f; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(_start) - -LENTRY(_get_pc) - r0 = rets; -#if ANOMALY_05000371 - NOP; - NOP; - NOP; -#endif - rts; -ENDPROC(_get_pc) diff --git a/cpu/blackfin/traps.c b/cpu/blackfin/traps.c deleted file mode 100644 index caaea94..0000000 --- a/cpu/blackfin/traps.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * U-boot - traps.c Routines related to interrupts and exceptions - * - * Copyright (c) 2005-2008 Analog Devices Inc. - * - * This file is based on - * No original Copyright holder listed, - * Probabily original (C) Roman Zippel (assigned DJD, 1999) - * - * Copyright 2003 Metrowerks - for Blackfin - * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca> - * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org> - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <kgdb.h> -#include <linux/types.h> -#include <asm/traps.h> -#include <asm/cplb.h> -#include <asm/io.h> -#include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/mpu.h> -#include <asm/mach-common/bits/trace.h> -#include <asm/deferred.h> -#include "cpu.h" - -#define trace_buffer_save(x) \ - do { \ - (x) = bfin_read_TBUFCTL(); \ - bfin_write_TBUFCTL((x) & ~TBUFEN); \ - } while (0) - -#define trace_buffer_restore(x) \ - bfin_write_TBUFCTL((x)) - -/* The purpose of this map is to provide a mapping of address<->cplb settings - * rather than an exact map of what is actually addressable on the part. This - * map covers all current Blackfin parts. If you try to access an address that - * is in this map but not actually on the part, you won't get an exception and - * reboot, you'll get an external hardware addressing error and reboot. Since - * only the ends matter (you did something wrong and the board reset), the means - * are largely irrelevant. - */ -struct memory_map { - uint32_t start, end; - uint32_t data_flags, inst_flags; -}; -const struct memory_map const bfin_memory_map[] = { - { /* external memory */ - .start = 0x00000000, - .end = 0x20000000, - .data_flags = SDRAM_DGENERIC, - .inst_flags = SDRAM_IGENERIC, - }, - { /* async banks */ - .start = 0x20000000, - .end = 0x30000000, - .data_flags = SDRAM_EBIU, - .inst_flags = SDRAM_INON_CHBL, - }, - { /* everything on chip */ - .start = 0xE0000000, - .end = 0xFFFFFFFF, - .data_flags = L1_DMEMORY, - .inst_flags = L1_IMEMORY, - } -}; - -#ifdef CONFIG_EXCEPTION_DEFER -unsigned int deferred_regs[deferred_regs_last]; -#endif - -/* - * Handle all exceptions while running in EVT3 or EVT5 - */ -int trap_c(struct pt_regs *regs, uint32_t level) -{ - uint32_t ret = 0; - uint32_t trapnr = (regs->seqstat & EXCAUSE); - bool data = false; - - switch (trapnr) { - /* 0x26 - Data CPLB Miss */ - case VEC_CPLB_M: - - if (ANOMALY_05000261) { - static uint32_t last_cplb_fault_retx; - /* - * Work around an anomaly: if we see a new DCPLB fault, - * return without doing anything. Then, - * if we get the same fault again, handle it. - */ - if (last_cplb_fault_retx != regs->retx) { - last_cplb_fault_retx = regs->retx; - return ret; - } - } - - data = true; - /* fall through */ - - /* 0x27 - Instruction CPLB Miss */ - case VEC_CPLB_I_M: { - volatile uint32_t *CPLB_ADDR_BASE, *CPLB_DATA_BASE, *CPLB_ADDR, *CPLB_DATA; - uint32_t new_cplb_addr = 0, new_cplb_data = 0; - static size_t last_evicted; - size_t i; - unsigned long tflags; - -#ifdef CONFIG_EXCEPTION_DEFER - /* This should never happen */ - if (level == 5) - bfin_panic(regs); -#endif - - /* - * Keep the trace buffer so that a miss here points people - * to the right place (their code). Crashes here rarely - * happen. If they do, only the Blackfin maintainer cares. - */ - trace_buffer_save(tflags); - - new_cplb_addr = (data ? bfin_read_DCPLB_FAULT_ADDR() : bfin_read_ICPLB_FAULT_ADDR()) & ~(4 * 1024 * 1024 - 1); - - for (i = 0; i < ARRAY_SIZE(bfin_memory_map); ++i) { - /* if the exception is inside this range, lets use it */ - if (new_cplb_addr >= bfin_memory_map[i].start && - new_cplb_addr < bfin_memory_map[i].end) - break; - } - if (i == ARRAY_SIZE(bfin_memory_map)) { - printf("%cCPLB exception outside of memory map at 0x%p\n", - (data ? 'D' : 'I'), (void *)new_cplb_addr); - bfin_panic(regs); - } else - debug("CPLB addr %p matches map 0x%p - 0x%p\n", new_cplb_addr, bfin_memory_map[i].start, bfin_memory_map[i].end); - new_cplb_data = (data ? bfin_memory_map[i].data_flags : bfin_memory_map[i].inst_flags); - - if (data) { - CPLB_ADDR_BASE = (uint32_t *)DCPLB_ADDR0; - CPLB_DATA_BASE = (uint32_t *)DCPLB_DATA0; - } else { - CPLB_ADDR_BASE = (uint32_t *)ICPLB_ADDR0; - CPLB_DATA_BASE = (uint32_t *)ICPLB_DATA0; - } - - /* find the next unlocked entry and evict it */ - i = last_evicted & 0xF; - debug("last evicted = %i\n", i); - CPLB_DATA = CPLB_DATA_BASE + i; - while (*CPLB_DATA & CPLB_LOCK) { - debug("skipping %i %p - %08X\n", i, CPLB_DATA, *CPLB_DATA); - i = (i + 1) & 0xF; /* wrap around */ - CPLB_DATA = CPLB_DATA_BASE + i; - } - CPLB_ADDR = CPLB_ADDR_BASE + i; - - debug("evicting entry %i: 0x%p 0x%08X\n", i, *CPLB_ADDR, *CPLB_DATA); - last_evicted = i + 1; - - /* need to turn off cplbs whenever we muck with the cplb table */ -#if ENDCPLB != ENICPLB -# error cplb enable bit violates my sanity -#endif - uint32_t mem_control = (data ? DMEM_CONTROL : IMEM_CONTROL); - bfin_write32(mem_control, bfin_read32(mem_control) & ~ENDCPLB); - *CPLB_ADDR = new_cplb_addr; - *CPLB_DATA = new_cplb_data; - bfin_write32(mem_control, bfin_read32(mem_control) | ENDCPLB); - SSYNC(); - - /* dump current table for debugging purposes */ - CPLB_ADDR = CPLB_ADDR_BASE; - CPLB_DATA = CPLB_DATA_BASE; - for (i = 0; i < 16; ++i) - debug("%2i 0x%p 0x%08X\n", i, *CPLB_ADDR++, *CPLB_DATA++); - - trace_buffer_restore(tflags); - break; - } -#ifdef CONFIG_CMD_KGDB - /* Single step - * if we are in IRQ5, just ignore, otherwise defer, and handle it in kgdb - */ - case VEC_STEP: - if (level == 3) { - /* If we just returned from an interrupt, the single step - * event is for the RTI instruction. - */ - if (regs->retx == regs->pc) - break; - /* we just return if we are single stepping through IRQ5 */ - if (regs->ipend & 0x20) - break; - /* Otherwise, turn single stepping off & fall through, - * which defers to IRQ5 - */ - regs->syscfg &= ~1; - } - /* fall through */ -#endif - default: -#ifdef CONFIG_CMD_KGDB - if (level == 3) { - /* We need to handle this at EVT5, so try again */ - ret = 1; - break; - } - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return 0; -#endif - bfin_panic(regs); - } - return ret; -} - -#ifdef CONFIG_DEBUG_DUMP -# define ENABLE_DUMP 1 -#else -# define ENABLE_DUMP 0 -#endif - -#ifndef CONFIG_KALLSYMS -const char *symbol_lookup(unsigned long addr, unsigned long *caddr) -{ - *caddr = addr; - return "N/A"; -} -#endif - -static void decode_address(char *buf, unsigned long address) -{ - unsigned long sym_addr; - void *paddr = (void *)address; - const char *sym = symbol_lookup(address, &sym_addr); - - if (sym) { - sprintf(buf, "<0x%p> { %s + 0x%lx }", paddr, sym, address - sym_addr); - return; - } - - if (!address) - sprintf(buf, "<0x%p> /* Maybe null pointer? */", paddr); - else if (address >= CONFIG_SYS_MONITOR_BASE && - address < CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - sprintf(buf, "<0x%p> /* somewhere in u-boot */", paddr); - else - sprintf(buf, "<0x%p> /* unknown address */", paddr); -} - -static char *strhwerrcause(uint16_t hwerrcause) -{ - switch (hwerrcause) { - case 0x02: return "system mmr error"; - case 0x03: return "external memory addressing error"; - case 0x12: return "performance monitor overflow"; - case 0x18: return "raise 5 instruction"; - default: return "undef"; - } -} - -static char *strexcause(uint16_t excause) -{ - switch (excause) { - case 0x00 ... 0xf: return "custom exception"; - case 0x10: return "single step"; - case 0x11: return "trace buffer full"; - case 0x21: return "undef inst"; - case 0x22: return "illegal inst"; - case 0x23: return "dcplb prot violation"; - case 0x24: return "misaligned data"; - case 0x25: return "unrecoverable event"; - case 0x26: return "dcplb miss"; - case 0x27: return "multiple dcplb hit"; - case 0x28: return "emulation watchpoint"; - case 0x2a: return "misaligned inst"; - case 0x2b: return "icplb prot violation"; - case 0x2c: return "icplb miss"; - case 0x2d: return "multiple icplb hit"; - case 0x2e: return "illegal use of supervisor resource"; - default: return "undef"; - } -} - -void dump(struct pt_regs *fp) -{ - char buf[150]; - int i; - uint16_t hwerrcause, excause; - - if (!ENABLE_DUMP) - return; - -#ifndef CONFIG_CMD_KGDB - /* fp->ipend is normally garbage, so load it ourself */ - fp->ipend = bfin_read_IPEND(); -#endif - - hwerrcause = (fp->seqstat & HWERRCAUSE) >> HWERRCAUSE_P; - excause = (fp->seqstat & EXCAUSE) >> EXCAUSE_P; - - printf("SEQUENCER STATUS:\n"); - printf(" SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", - fp->seqstat, fp->ipend, fp->syscfg); - printf(" HWERRCAUSE: 0x%x: %s\n", hwerrcause, strhwerrcause(hwerrcause)); - printf(" EXCAUSE : 0x%x: %s\n", excause, strexcause(excause)); - for (i = 6; i <= 15; ++i) { - if (fp->ipend & (1 << i)) { - decode_address(buf, bfin_read32(EVT0 + 4*i)); - printf(" physical IVG%i asserted : %s\n", i, buf); - } - } - decode_address(buf, fp->rete); - printf(" RETE: %s\n", buf); - decode_address(buf, fp->retn); - printf(" RETN: %s\n", buf); - decode_address(buf, fp->retx); - printf(" RETX: %s\n", buf); - decode_address(buf, fp->rets); - printf(" RETS: %s\n", buf); - /* we lie and store RETI in "pc" */ - decode_address(buf, fp->pc); - printf(" RETI: %s\n", buf); - - if (fp->seqstat & EXCAUSE) { - decode_address(buf, bfin_read_DCPLB_FAULT_ADDR()); - printf("DCPLB_FAULT_ADDR: %s\n", buf); - decode_address(buf, bfin_read_ICPLB_FAULT_ADDR()); - printf("ICPLB_FAULT_ADDR: %s\n", buf); - } - - printf("\nPROCESSOR STATE:\n"); - printf(" R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", - fp->r0, fp->r1, fp->r2, fp->r3); - printf(" R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", - fp->r4, fp->r5, fp->r6, fp->r7); - printf(" P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n", - fp->p0, fp->p1, fp->p2, fp->p3); - printf(" P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n", - fp->p4, fp->p5, fp->fp, (unsigned long)fp); - printf(" LB0: %08lx LT0: %08lx LC0: %08lx\n", - fp->lb0, fp->lt0, fp->lc0); - printf(" LB1: %08lx LT1: %08lx LC1: %08lx\n", - fp->lb1, fp->lt1, fp->lc1); - printf(" B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n", - fp->b0, fp->l0, fp->m0, fp->i0); - printf(" B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n", - fp->b1, fp->l1, fp->m1, fp->i1); - printf(" B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n", - fp->b2, fp->l2, fp->m2, fp->i2); - printf(" B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n", - fp->b3, fp->l3, fp->m3, fp->i3); - printf("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", - fp->a0w, fp->a0x, fp->a1w, fp->a1x); - - printf("USP : %08lx ASTAT: %08lx\n", - fp->usp, fp->astat); - - printf("\n"); -} - -void dump_bfin_trace_buffer(void) -{ - char buf[150]; - unsigned long tflags; - int i = 0; - - if (!ENABLE_DUMP) - return; - - trace_buffer_save(tflags); - - printf("Hardware Trace:\n"); - - if (bfin_read_TBUFSTAT() & TBUFCNT) { - for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { - decode_address(buf, bfin_read_TBUF()); - printf("%4i Target : %s\n", i, buf); - decode_address(buf, bfin_read_TBUF()); - printf(" Source : %s\n", buf); - } - } - - trace_buffer_restore(tflags); -} - -void bfin_panic(struct pt_regs *regs) -{ - if (ENABLE_DUMP) { - unsigned long tflags; - trace_buffer_save(tflags); - } - - puts( - "\n" - "\n" - "\n" - "Ack! Something bad happened to the Blackfin!\n" - "\n" - ); - dump(regs); - dump_bfin_trace_buffer(); - puts("\n"); - bfin_reset_or_hang(); -} diff --git a/cpu/blackfin/watchdog.c b/cpu/blackfin/watchdog.c deleted file mode 100644 index 1886bda..0000000 --- a/cpu/blackfin/watchdog.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * watchdog.c - driver for Blackfin on-chip watchdog - * - * Copyright (c) 2007-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <watchdog.h> -#include <asm/blackfin.h> - -void hw_watchdog_reset(void) -{ - bfin_write_WDOG_STAT(0); -} - -void hw_watchdog_init(void) -{ - bfin_write_WDOG_CNT(5 * get_sclk()); /* 5 second timeout */ - hw_watchdog_reset(); - bfin_write_WDOG_CTL(0x0); -} |