summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-02-23 19:30:57 +0000
committerwdenk <wdenk>2004-02-23 19:30:57 +0000
commit2d1a537d87727907bf4d888760cba4abc0b52ad3 (patch)
tree29deb37d04cc84308f57ec4274bea7efad743536 /cpu
parent3f85ce27858c44ee75d3650a53154ebcec0e24f2 (diff)
downloadu-boot-imx-2d1a537d87727907bf4d888760cba4abc0b52ad3.zip
u-boot-imx-2d1a537d87727907bf4d888760cba4abc0b52ad3.tar.gz
u-boot-imx-2d1a537d87727907bf4d888760cba4abc0b52ad3.tar.bz2
* Patch by Thomas Elste, 10 Feb 2004:
Add support for NET+50 CPU and ModNET50 board * Patch by Sam Song, 10 Feb 2004: Fix typos in cfi_flash.c * Patch by Leon Kukovec, 10 Feb 2004 Fixed long dir entry slot id calculation in get_vfatname * Patch by Robin Gilks, 10 Feb 2004: add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==, !=, <>, <, >, <=, >=)
Diffstat (limited to 'cpu')
-rw-r--r--cpu/arm720t/Makefile2
-rw-r--r--cpu/arm720t/cpu.c4
-rw-r--r--cpu/arm720t/interrupts.c25
-rw-r--r--cpu/arm720t/serial.c4
-rw-r--r--cpu/arm720t/serial_netarm.c185
-rw-r--r--cpu/arm720t/start.S72
6 files changed, 288 insertions, 4 deletions
diff --git a/cpu/arm720t/Makefile b/cpu/arm720t/Makefile
index 8c950da..f273d92 100644
--- a/cpu/arm720t/Makefile
+++ b/cpu/arm720t/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(CPU).a
START = start.o
-OBJS = serial.o interrupts.o cpu.o
+OBJS = serial.o serial_netarm.o interrupts.o cpu.o
all: .depend $(START) $(LIB)
diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c
index 5637eb6..0ad5481 100644
--- a/cpu/arm720t/cpu.c
+++ b/cpu/arm720t/cpu.c
@@ -106,7 +106,9 @@ int cleanup_before_linux (void)
unsigned long i;
disable_interrupts ();
-
+#ifdef CONFIG_NETARM
+ return 0;
+#endif
/* turn off I-cache */
asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
i &= ~0x1000;
diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c
index b1ee188..0291193 100644
--- a/cpu/arm720t/interrupts.c
+++ b/cpu/arm720t/interrupts.c
@@ -30,14 +30,24 @@
#include <clps7111.h>
#include <asm/proc-armv/ptrace.h>
+#ifdef CONFIG_NETARM
+#include <asm/arch/netarm_registers.h>
+#endif
extern void reset_cpu(ulong addr);
+#ifndef CONFIG_NETARM
/* we always count down the max. */
#define TIMER_LOAD_VAL 0xffff
-
/* macro to read the 16 bit timer */
#define READ_TIMER (IO_TC1D & 0xffff)
+#else
+#define IRQEN (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE))
+#define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL))
+#define TM2STAT (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_STATUS))
+#define TIMER_LOAD_VAL NETARM_GEN_TSTAT_CTC_MASK
+#define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK)
+#endif
#ifdef CONFIG_USE_IRQ
/* enable IRQ/FIQ interrupts */
@@ -177,6 +187,18 @@ static ulong lastdec;
int interrupt_init (void)
{
+#ifdef CONFIG_NETARM
+ /* disable all interrupts */
+ IRQEN = 0;
+
+ /* operate timer 2 in non-prescale mode */
+ TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CFG_HZ) |
+ NETARM_GEN_TCTL_ENABLE |
+ NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL));
+
+ /* set timer 2 counter */
+ lastdec = TIMER_LOAD_VAL;
+#else
/* disable all interrupts */
IO_INTMR1 = 0;
@@ -188,6 +210,7 @@ int interrupt_init (void)
/* set timer 1 counter */
lastdec = IO_TC1D = TIMER_LOAD_VAL;
+#endif
timestamp = 0;
return (0);
diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c
index d38ac39..5c6a0cc 100644
--- a/cpu/arm720t/serial.c
+++ b/cpu/arm720t/serial.c
@@ -31,6 +31,8 @@
#include <common.h>
#include <clps7111.h>
+#ifndef CONFIG_NETARM
+
void serial_setbrg (void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -124,3 +126,5 @@ serial_puts (const char *s)
serial_putc (*s++);
}
}
+
+#endif /* CONFIG_NETARM */
diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c
new file mode 100644
index 0000000..8cfe049
--- /dev/null
+++ b/cpu/arm720t/serial_netarm.c
@@ -0,0 +1,185 @@
+/*
+ * Serial Port stuff - taken from Linux
+ *
+ * (C) Copyright 2002
+ * MAZeT GmbH <www.mazet.de>
+ * Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
+ *
+ * (c) 2004
+ * IMMS gGmbH <www.imms.de>
+ * Thomas Elste <info@elste.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/netarm_registers.h>
+
+#ifdef CONFIG_NETARM
+
+#define PORTA (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA))
+#define PORTB (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB))
+
+/* wait until transmitter is ready for another character */
+#define TXWAITRDY(registers) \
+{ \
+ ulong tmo = get_timer(0) + 1 * CFG_HZ; \
+ while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 ) { \
+ if (get_timer(0) > tmo) \
+ break; \
+ } \
+}
+
+
+volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0);
+volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1);
+
+extern void _netarm_led_FAIL1(void);
+
+/*
+ * Setup both serial i/f with given baudrate
+ */
+void serial_setbrg (void)
+{
+ /* get the gd pointer */
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* set 0 ... make sure pins are configured for serial */
+ PORTA = PORTB =
+ NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
+
+ /* first turn em off */
+ serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = 0;
+
+ /* clear match register, we don't need it */
+ serial_reg_ch1->rx_match = serial_reg_ch2->rx_match = 0;
+
+ /* setup bit rate generator and rx buffer gap timer (1 byte only) */
+ if ((gd->baudrate >= MIN_BAUD_RATE)
+ && (gd->baudrate <= MAX_BAUD_RATE)) {
+ serial_reg_ch1->bitrate = serial_reg_ch2->bitrate =
+ NETARM_SER_BR_X16 (gd->baudrate);
+ serial_reg_ch1->rx_buf_timer = serial_reg_ch2->rx_buf_timer =
+ 0;
+ serial_reg_ch1->rx_char_timer = serial_reg_ch2->rx_char_timer =
+ NETARM_SER_RXGAP (gd->baudrate);
+ } else {
+ hang ();
+ }
+
+ /* setup port mode */
+ serial_reg_ch1->ctrl_b = serial_reg_ch2->ctrl_b =
+ ( NETARM_SER_CTLB_RCGT_EN |
+ NETARM_SER_CTLB_UART_MODE);
+ serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a =
+ ( NETARM_SER_CTLA_ENABLE |
+ NETARM_SER_CTLA_P_NONE |
+ /* see errata */
+ NETARM_SER_CTLA_2STOP |
+ NETARM_SER_CTLA_8BITS |
+ NETARM_SER_CTLA_DTR_EN |
+ NETARM_SER_CTLA_RTS_EN);
+}
+
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+int serial_init (void)
+{
+ serial_setbrg ();
+ return 0;
+}
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+ volatile unsigned char *fifo;
+
+ /* If \n, also do \r */
+ if (c == '\n')
+ serial_putc ('\r');
+
+ fifo = (volatile unsigned char *) &(serial_reg_ch1->fifo);
+ TXWAITRDY (serial_reg_ch1);
+ *fifo = c;
+}
+
+/*
+ * Test of a single byte from the serial port. Returns 1 on success, 0
+ * otherwise.
+ */
+int serial_tstc(void)
+{
+ return serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY;
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise.
+ */
+int serial_getc (void)
+{
+ unsigned int ch_uint;
+ volatile unsigned int *fifo;
+ volatile unsigned char *fifo_char = NULL;
+ int buf_count = 0;
+
+ while (!(serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY))
+ /* NOP */ ;
+
+ fifo = (volatile unsigned int *) &(serial_reg_ch1->fifo);
+ fifo_char = (unsigned char *) &ch_uint;
+ ch_uint = *fifo;
+
+ buf_count = NETARM_SER_STATA_RXFDB (serial_reg_ch1->status_a);
+ switch (buf_count) {
+ case NETARM_SER_STATA_RXFDB_4BYTES:
+ buf_count = 4;
+ break;
+ case NETARM_SER_STATA_RXFDB_3BYTES:
+ buf_count = 3;
+ break;
+ case NETARM_SER_STATA_RXFDB_2BYTES:
+ buf_count = 2;
+ break;
+ case NETARM_SER_STATA_RXFDB_1BYTES:
+ buf_count = 1;
+ break;
+ default:
+ /* panic, be never here */
+ }
+
+ serial_reg_ch1->status_a |= NETARM_SER_STATA_RX_CLOSED;
+
+ return ch_uint & 0xff;
+}
+
+void serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+
+#endif /* CONFIG_NETARM */
diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S
index 7fe36c6..791049a 100644
--- a/cpu/arm720t/start.S
+++ b/cpu/arm720t/start.S
@@ -26,7 +26,9 @@
#include <config.h>
#include <version.h>
-
+#ifdef CONFIG_NETARM
+#include <asm/arch/netarm_registers.h>
+#endif
/*
*************************************************************************
@@ -195,6 +197,7 @@ SYSCON3: .word 0x80002200
#define CLKCTL_73 0x6 /* 73.728 MHz */
cpu_init_crit:
+#ifndef CONFIG_NETARM
/*
* mask all IRQs by clearing all bits in the INTMRs
*/
@@ -221,6 +224,54 @@ cpu_init_crit:
bic r0, r0, #0x0000008f @ clear bits 7, 3:0 (B--- WCAM)
orr r0, r0, #0x00000002 @ set bit 2 (A) Align
mcr p15,0,r0,c1,c0
+#else /* CONFIG_NETARM */
+ /*
+ * prior to software reset : need to set pin PORTC4 to be *HRESET
+ */
+ ldr r0, =NETARM_GEN_MODULE_BASE
+ ldr r1, =(NETARM_GEN_PORT_MODE(0x10) | \
+ NETARM_GEN_PORT_DIR(0x10))
+ str r1, [r0, #+NETARM_GEN_PORTC]
+ /*
+ * software reset : see HW Ref. Guide 8.2.4 : Software Service register
+ * for an explanation of this process
+ */
+ ldr r0, =NETARM_GEN_MODULE_BASE
+ ldr r1, =NETARM_GEN_SW_SVC_RESETA
+ str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
+ ldr r1, =NETARM_GEN_SW_SVC_RESETB
+ str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
+ ldr r1, =NETARM_GEN_SW_SVC_RESETA
+ str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
+ ldr r1, =NETARM_GEN_SW_SVC_RESETB
+ str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
+ /*
+ * setup PLL and System Config
+ */
+ ldr r0, =NETARM_GEN_MODULE_BASE
+
+ ldr r1, =( NETARM_GEN_SYS_CFG_LENDIAN | \
+ NETARM_GEN_SYS_CFG_BUSFULL | \
+ NETARM_GEN_SYS_CFG_USER_EN | \
+ NETARM_GEN_SYS_CFG_ALIGN_ABORT | \
+ NETARM_GEN_SYS_CFG_BUSARB_INT | \
+ NETARM_GEN_SYS_CFG_BUSMON_EN )
+
+ str r1, [r0, #+NETARM_GEN_SYSTEM_CONTROL]
+
+ ldr r1, =( NETARM_GEN_PLL_CTL_PLLCNT(NETARM_PLL_COUNT_VAL) | \
+ NETARM_GEN_PLL_CTL_POLTST_DEF | \
+ NETARM_GEN_PLL_CTL_INDIV(1) | \
+ NETARM_GEN_PLL_CTL_ICP_DEF | \
+ NETARM_GEN_PLL_CTL_OUTDIV(2) )
+ str r1, [r0, #+NETARM_GEN_PLL_CONTROL]
+ /*
+ * mask all IRQs by clearing all bits in the INTMRs
+ */
+ mov r1, #0
+ ldr r0, =NETARM_GEN_MODULE_BASE
+ str r1, [r0, #+NETARM_GEN_INTR_ENABLE]
+#endif /* CONFIG_NETARM */
#ifdef CONFIG_ARM7_REVD
/* set clock speed */
@@ -415,6 +466,7 @@ fiq:
.align 5
.globl reset_cpu
reset_cpu:
+#ifndef CONFIG_NETARM
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4)
@@ -423,3 +475,21 @@ reset_cpu:
bic ip, ip, #0x2100 @ ..v....s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+#else
+ ldr r1, =NETARM_MEM_MODULE_BASE
+ ldr r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR]
+ ldr r1, =0xFFFFF000
+ and r0, r1, r0
+ ldr r1, =(relocate-TEXT_BASE)
+ add r0, r1, r0
+ ldr r4, =NETARM_GEN_MODULE_BASE
+ ldr r1, =NETARM_GEN_SW_SVC_RESETA
+ str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
+ ldr r1, =NETARM_GEN_SW_SVC_RESETB
+ str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
+ ldr r1, =NETARM_GEN_SW_SVC_RESETA
+ str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
+ ldr r1, =NETARM_GEN_SW_SVC_RESETB
+ str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
+ mov pc, r0
+#endif