Merge branch 'master' of git://git.denx.de/u-boot-arm

1 files changed, 284 insertions, 0 deletions

diff --git a/cpu/arm_cortexa8/omap3/mem.c b/cpu/arm_cortexa8/omap3/mem.c
new file mode 100644
index 0000000..3cc22c4
--- /dev/null
+++ b/cpu/arm_cortexa8/omap3/mem.c
@@ -0,0 +1,284 @@
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *     Manikandan Pillai <mani.pillai@ti.com>
+ *
+ * Initial Code from:
+ *     Richard Woodruff <r-woodruff2@ti.com>
+ *     Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <command.h>
+
+/*
+ * Only One NAND allowed on board at a time.
+ * The GPMC CS Base for the same
+ */
+unsigned int boot_flash_base;
+unsigned int boot_flash_off;
+unsigned int boot_flash_sec;
+unsigned int boot_flash_type;
+volatile unsigned int boot_flash_env_addr;
+
+#if defined(CONFIG_CMD_NAND)
+static u32 gpmc_m_nand[GPMC_MAX_REG] = {
+	M_NAND_GPMC_CONFIG1,
+	M_NAND_GPMC_CONFIG2,
+	M_NAND_GPMC_CONFIG3,
+	M_NAND_GPMC_CONFIG4,
+	M_NAND_GPMC_CONFIG5,
+	M_NAND_GPMC_CONFIG6, 0
+};
+
+gpmc_csx_t *nand_cs_base;
+gpmc_t *gpmc_cfg_base;
+
+#if defined(CONFIG_ENV_IS_IN_NAND)
+#define GPMC_CS 0
+#else
+#define GPMC_CS 1
+#endif
+
+#endif
+
+#if defined(CONFIG_CMD_ONENAND)
+static u32 gpmc_onenand[GPMC_MAX_REG] = {
+	ONENAND_GPMC_CONFIG1,
+	ONENAND_GPMC_CONFIG2,
+	ONENAND_GPMC_CONFIG3,
+	ONENAND_GPMC_CONFIG4,
+	ONENAND_GPMC_CONFIG5,
+	ONENAND_GPMC_CONFIG6, 0
+};
+
+gpmc_csx_t *onenand_cs_base;
+
+#if defined(CONFIG_ENV_IS_IN_ONENAND)
+#define GPMC_CS 0
+#else
+#define GPMC_CS 1
+#endif
+
+#endif
+
+static sdrc_t *sdrc_base = (sdrc_t *)OMAP34XX_SDRC_BASE;
+
+/**************************************************************************
+ * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
+ *  command line mem=xyz use all memory with out discontinuous support
+ *  compiled in.  Could do it at the ATAG, but there really is two banks...
+ * Called as part of 2nd phase DDR init.
+ **************************************************************************/
+void make_cs1_contiguous(void)
+{
+	u32 size, a_add_low, a_add_high;
+
+	size = get_sdr_cs_size(CS0);
+	size /= SZ_32M;			/* find size to offset CS1 */
+	a_add_high = (size & 3) << 8;	/* set up low field */
+	a_add_low = (size & 0x3C) >> 2;	/* set up high field */
+	writel((a_add_high | a_add_low), &sdrc_base->cs_cfg);
+
+}
+
+/********************************************************
+ *  mem_ok() - test used to see if timings are correct
+ *             for a part. Helps in guessing which part
+ *             we are currently using.
+ *******************************************************/
+u32 mem_ok(u32 cs)
+{
+	u32 val1, val2, addr;
+	u32 pattern = 0x12345678;
+
+	addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs);
+
+	writel(0x0, addr + 0x400);	/* clear pos A */
+	writel(pattern, addr);		/* pattern to pos B */
+	writel(0x0, addr + 4);		/* remove pattern off the bus */
+	val1 = readl(addr + 0x400);	/* get pos A value */
+	val2 = readl(addr);		/* get val2 */
+
+	if ((val1 != 0) || (val2 != pattern))	/* see if pos A val changed */
+		return 0;
+	else
+		return 1;
+}
+
+/********************************************************
+ *  sdrc_init() - init the sdrc chip selects CS0 and CS1
+ *  - early init routines, called from flash or
+ *  SRAM.
+ *******************************************************/
+void sdrc_init(void)
+{
+	/* only init up first bank here */
+	do_sdrc_init(CS0, EARLY_INIT);
+}
+
+/*************************************************************************
+ * do_sdrc_init(): initialize the SDRAM for use.
+ *  -code sets up SDRAM basic SDRC timings for CS0
+ *  -optimal settings can be placed here, or redone after i2c
+ *      inspection of board info
+ *
+ *  - code called once in C-Stack only context for CS0 and a possible 2nd
+ *      time depending on memory configuration from stack+global context
+ **************************************************************************/
+
+void do_sdrc_init(u32 cs, u32 early)
+{
+	sdrc_actim_t *sdrc_actim_base;
+
+	if(cs)
+		sdrc_actim_base = (sdrc_actim_t *)SDRC_ACTIM_CTRL1_BASE;
+	else
+		sdrc_actim_base = (sdrc_actim_t *)SDRC_ACTIM_CTRL0_BASE;
+
+	if (early) {
+		/* reset sdrc controller */
+		writel(SOFTRESET, &sdrc_base->sysconfig);
+		wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status,
+			      12000000);
+		writel(0, &sdrc_base->sysconfig);
+
+		/* setup sdrc to ball mux */
+		writel(SDP_SDRC_SHARING, &sdrc_base->sharing);
+
+		/* Disable Power Down of CKE cuz of 1 CKE on combo part */
+		writel(SRFRONRESET | PAGEPOLICY_HIGH, &sdrc_base->power);
+
+		writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl);
+		sdelay(0x20000);
+	}
+
+	writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY |
+		RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 |
+		DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg);
+	writel(ARCV | ARE_ARCV_1, &sdrc_base->cs[cs].rfr_ctrl);
+	writel(V_ACTIMA_165, &sdrc_actim_base->ctrla);
+	writel(V_ACTIMB_165, &sdrc_actim_base->ctrlb);
+
+	writel(CMD_NOP, &sdrc_base ->cs[cs].manual);
+	writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
+	writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+	writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+
+	/*
+	 * CAS latency 3, Write Burst = Read Burst, Serial Mode,
+	 * Burst length = 4
+	 */
+	writel(CASL3 | BURSTLENGTH4, &sdrc_base->cs[cs].mr);
+
+	if (!mem_ok(cs))
+		writel(0, &sdrc_base->cs[cs].mcfg);
+}
+
+void enable_gpmc_config(u32 *gpmc_config, gpmc_csx_t *gpmc_cs_base, u32 base,
+			u32 size)
+{
+	writel(0, &gpmc_cs_base->config7);
+	sdelay(1000);
+	/* Delay for settling */
+	writel(gpmc_config[0], &gpmc_cs_base->config1);
+	writel(gpmc_config[1], &gpmc_cs_base->config2);
+	writel(gpmc_config[2], &gpmc_cs_base->config3);
+	writel(gpmc_config[3], &gpmc_cs_base->config4);
+	writel(gpmc_config[4], &gpmc_cs_base->config5);
+	writel(gpmc_config[5], &gpmc_cs_base->config6);
+	/* Enable the config */
+	writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) |
+		(1 << 6)), &gpmc_cs_base->config7);
+	sdelay(2000);
+}
+
+/*****************************************************
+ * gpmc_init(): init gpmc bus
+ * Init GPMC for x16, MuxMode (SDRAM in x32).
+ * This code can only be executed from SRAM or SDRAM.
+ *****************************************************/
+void gpmc_init(void)
+{
+	/* putting a blanket check on GPMC based on ZeBu for now */
+	u32 *gpmc_config = NULL;
+	gpmc_t *gpmc_base = (gpmc_t *)GPMC_BASE;
+	gpmc_csx_t *gpmc_cs_base = (gpmc_csx_t *)GPMC_CONFIG_CS0_BASE;
+	u32 base = 0;
+	u32 size = 0;
+	u32 f_off = CONFIG_SYS_MONITOR_LEN;
+	u32 f_sec = 0;
+	u32 config = 0;
+
+	/* global settings */
+	writel(0, &gpmc_base->irqenable); /* isr's sources masked */
+	writel(0, &gpmc_base->timeout_control);/* timeout disable */
+
+	config = readl(&gpmc_base->config);
+	config &= (~0xf00);
+	writel(config, &gpmc_base->config);
+
+	/*
+	 * Disable the GPMC0 config set by ROM code
+	 * It conflicts with our MPDB (both at 0x08000000)
+	 */
+	writel(0, &gpmc_cs_base->config7);
+	sdelay(1000);
+
+#if defined(CONFIG_CMD_NAND)	/* CS 0 */
+	gpmc_config = gpmc_m_nand;
+	gpmc_cfg_base = gpmc_base;
+	nand_cs_base = (gpmc_csx_t *)(GPMC_CONFIG_CS0_BASE +
+					(GPMC_CS * GPMC_CONFIG_WIDTH));
+	base = PISMO1_NAND_BASE;
+	size = PISMO1_NAND_SIZE;
+	enable_gpmc_config(gpmc_config, nand_cs_base, base, size);
+#if defined(CONFIG_ENV_IS_IN_NAND)
+	f_off = SMNAND_ENV_OFFSET;
+	f_sec = SZ_128K;
+	/* env setup */
+	boot_flash_base = base;
+	boot_flash_off = f_off;
+	boot_flash_sec = f_sec;
+	boot_flash_env_addr = f_off;
+#endif
+#endif
+
+#if defined(CONFIG_CMD_ONENAND)
+	gpmc_config = gpmc_onenand;
+	onenand_cs_base = (gpmc_csx_t *)(GPMC_CONFIG_CS0_BASE +
+					(GPMC_CS * GPMC_CONFIG_WIDTH));
+	base = PISMO1_ONEN_BASE;
+	size = PISMO1_ONEN_SIZE;
+	enable_gpmc_config(gpmc_config, onenand_cs_base, base, size);
+#if defined(CONFIG_ENV_IS_IN_ONENAND)
+	f_off = ONENAND_ENV_OFFSET;
+	f_sec = SZ_128K;
+	/* env setup */
+	boot_flash_base = base;
+	boot_flash_off = f_off;
+	boot_flash_sec = f_sec;
+	boot_flash_env_addr = f_off;
+#endif
+#endif
+}