* Code cleanup

* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)

1 files changed, 0 insertions, 97 deletions

diff --git a/cpu/arm920t/speed.c b/cpu/arm920t/speed.c
deleted file mode 100644
index 1f43543..0000000
--- a/cpu/arm920t/speed.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * (C) Copyright 2001-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* This code should work for both the S3C2400 and the S3C2410
- * as they seem to have the same PLL and clock machinery inside.
- * The different address mapping is handled by the s3c24xx.h files below.
- */
-
-#include <common.h>
-#if defined(CONFIG_S3C2400)
-#include <s3c2400.h>
-#elif defined(CONFIG_S3C2410)
-#include <s3c2410.h>
-#endif
-
-#define MPLL 0
-#define UPLL 1
-
-/* ------------------------------------------------------------------------- */
-/* NOTE: This describes the proper use of this file.
- *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
- *
- * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
- * the specified bus in HZ.
- */
-/* ------------------------------------------------------------------------- */
-
-static ulong get_PLLCLK(int pllreg)
-{
-    S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-    ulong r, m, p, s;
-
-    if (pllreg == MPLL)
-	r = clk_power->MPLLCON;
-    else if (pllreg == UPLL)
-	r = clk_power->UPLLCON;
-    else
-	hang();
-
-    m = ((r & 0xFF000) >> 12) + 8;
-    p = ((r & 0x003F0) >> 4) + 2;
-    s = r & 0x3;
-
-    return((CONFIG_SYS_CLK_FREQ * m) / (p << s));
-}
-
-/* return FCLK frequency */
-ulong get_FCLK(void)
-{
-    return(get_PLLCLK(MPLL));
-}
-
-/* return HCLK frequency */
-ulong get_HCLK(void)
-{
-    S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-
-    return((clk_power->CLKDIVN & 0x2) ? get_FCLK()/2 : get_FCLK());
-}
-
-/* return PCLK frequency */
-ulong get_PCLK(void)
-{
-    S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-
-    return((clk_power->CLKDIVN & 0x1) ? get_HCLK()/2 : get_HCLK());
-}
-
-/* return UCLK frequency */
-ulong get_UCLK(void)
-{
-    return(get_PLLCLK(UPLL));
-}