diff options
| author | Jagan Teki <jagan@amarulasolutions.com> | 2016-10-08 18:00:13 +0530 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2016-10-26 16:53:16 +0200 |
| commit | 584133665affa0963ca1025a8ad1feae015dee06 (patch) | |
| tree | 627ffcac32fca2cbdc144bed748e7de962947dcd /configs/imx6qdl_icore_mmc_defconfig | |
| parent | 97d29ca3a825d81c87a9b071013e8fb30ed40ecf (diff) | |
| download | u-boot-imx-584133665affa0963ca1025a8ad1feae015dee06.zip u-boot-imx-584133665affa0963ca1025a8ad1feae015dee06.tar.gz u-boot-imx-584133665affa0963ca1025a8ad1feae015dee06.tar.bz2 | |
imx6: icorem6: Add ENET support
Add enet support for engicam icorem6 qdl starter kit.
- Add pinmux settings
- Add board_eth_init
TFTP log:
--------
Net: FEC [PRIME]
Hit any key to stop autoboot: 0
icorem6qdl> tftpboot {fdt_addr} imx6dl-icore.dtb
Using FEC device
TFTP from server 192.168.2.96; our IP address is 192.168.2.75
Filename 'imx6dl-icore.dtb'.
Load address: 0x0
Loading: ######
1.3 MiB/s
done
Bytes transferred = 28976 (7130 hex)
CACHE: Misaligned operation at range [00000000, 00007130]
icorem6qdl>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Diffstat (limited to 'configs/imx6qdl_icore_mmc_defconfig')
| -rw-r--r-- | configs/imx6qdl_icore_mmc_defconfig | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index ced6b10..c2c2fe8 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -14,6 +14,8 @@ CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_IMLS is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MMC=y CONFIG_CMD_CACHE=y @@ -23,7 +25,9 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_LIBFDT=y +CONFIG_FEC_MXC=y CONFIG_MXC_UART=y +CONFIG_NETDEVICES=y CONFIG_IMX_THERMAL=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y |