summaryrefslogtreecommitdiff
path: root/configs/afeb9260_defconfig
diff options
context:
space:
mode:
authorSiarhei Siamashka <siarhei.siamashka@gmail.com>2014-08-03 05:32:46 +0300
committerHans de Goede <hdegoede@redhat.com>2014-08-12 08:42:33 +0200
commit5c18384dea60a9acbbc6f2f95a5e291089db7e94 (patch)
tree4594f7dd4d9cfee94ad857627e29f977cffbf347 /configs/afeb9260_defconfig
parent94cd3019881523b7776138f93f9e6b9849adc4d4 (diff)
downloadu-boot-imx-5c18384dea60a9acbbc6f2f95a5e291089db7e94.zip
u-boot-imx-5c18384dea60a9acbbc6f2f95a5e291089db7e94.tar.gz
u-boot-imx-5c18384dea60a9acbbc6f2f95a5e291089db7e94.tar.bz2
sunxi: dram: Re-introduce the impedance calibration ond ODT
The DRAM controller allows to configure impedance either by using the calibration against an external high precision 240 ohm resistor, or by skipping the calibration and loading pre-defined data. The DRAM controller register guide is available here: http://linux-sunxi.org/A10_DRAM_Controller_Register_Guide#SDR_ZQCR0 The new code supports both of the impedance configuration modes: - If the higher bits of the 'zq' parameter in the 'dram_para' struct are zero, then the lowest 8 bits are used as the ZPROG value, where two divisors encoded in lower and higher 4 bits. One divisor is used for calibrating the termination impedance, and another is used for the output impedance. - If bits 27:8 in the 'zq' parameters are non-zero, then they are used as the pre-defined ZDATA value instead of performing the ZQ calibration. Two lowest bits in the 'odt_en' parameter enable ODT for the DQ and DQS lines individually. Enabling ODT for both DQ and DQS means that the 'odt_en' parameter needs to be set to 3. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Diffstat (limited to 'configs/afeb9260_defconfig')
0 files changed, 0 insertions, 0 deletions