summaryrefslogtreecommitdiff
path: root/common/cmd_i2c.c
diff options
context:
space:
mode:
authorLarry Johnson <lrj@acm.org>2008-01-10 22:23:39 -0500
committerWolfgang Denk <wd@denx.de>2008-01-12 20:58:15 +0100
commit0df6b8446c4721b91ce311548114891130371083 (patch)
tree16096d7f0a03ba5dcaa8fb3e4ae8c084a8ea6805 /common/cmd_i2c.c
parent64134f011254123618798ff77c42ba196b2ec485 (diff)
downloadu-boot-imx-0df6b8446c4721b91ce311548114891130371083.zip
u-boot-imx-0df6b8446c4721b91ce311548114891130371083.tar.gz
u-boot-imx-0df6b8446c4721b91ce311548114891130371083.tar.bz2
Fix "i2c sdram" command for DDR2 DIMMs
Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the "i2c sdram" command. This patch provides correct alternative interpretations when DDR2 memory is detected. Signed-off-by: Larry Johnson <lrj@acm.org>
Diffstat (limited to 'common/cmd_i2c.c')
-rw-r--r--common/cmd_i2c.c615
1 files changed, 496 insertions, 119 deletions
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 10cab46..988f91d 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -662,6 +662,7 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
*/
int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
+ enum {unknown, EDO, SDRAM, DDR2} type;
u_char chip;
u_char data[128];
u_char cksum;
@@ -696,10 +697,22 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
printf("Serial memory size 0x%02X\n", 1 << data[1]);
puts ("Memory type ");
switch(data[2]) {
- case 2: puts ("EDO\n"); break;
- case 4: puts ("SDRAM\n"); break;
- case 8: puts ("DDR2\n"); break;
- default: puts ("unknown\n"); break;
+ case 2:
+ type = EDO;
+ puts ("EDO\n");
+ break;
+ case 4:
+ type = SDRAM;
+ puts ("SDRAM\n");
+ break;
+ case 8:
+ type = DDR2;
+ puts ("DDR2\n");
+ break;
+ default:
+ type = unknown;
+ puts ("unknown\n");
+ break;
}
puts ("Row address bits ");
if ((data[3] & 0x00F0) == 0)
@@ -711,22 +724,89 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
printf("%d\n", data[4] & 0x0F);
else
printf("%d/%d\n", data[4] & 0x0F, (data[4] >> 4) & 0x0F);
- printf("Module rows %d\n", data[5]);
- printf("Module data width %d bits\n", (data[7] << 8) | data[6]);
+
+ switch (type) {
+ case DDR2:
+ printf("Number of ranks %d\n",
+ (data[5] & 0x07) + 1);
+ break;
+ default:
+ printf("Module rows %d\n", data[5]);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf("Module data width %d bits\n", data[6]);
+ break;
+ default:
+ printf("Module data width %d bits\n",
+ (data[7] << 8) | data[6]);
+ break;
+ }
+
puts ("Interface signal levels ");
switch(data[8]) {
- case 0: puts ("5.0v/TTL\n"); break;
+ case 0: puts ("TTL 5.0 V\n"); break;
case 1: puts ("LVTTL\n"); break;
- case 2: puts ("HSTL 1.5\n"); break;
- case 3: puts ("SSTL 3.3\n"); break;
- case 4: puts ("SSTL 2.5\n"); break;
- case 5: puts ("SSTL 1.8\n"); break;
+ case 2: puts ("HSTL 1.5 V\n"); break;
+ case 3: puts ("SSTL 3.3 V\n"); break;
+ case 4: puts ("SSTL 2.5 V\n"); break;
+ case 5: puts ("SSTL 1.8 V\n"); break;
default: puts ("unknown\n"); break;
}
- printf("SDRAM cycle time %d.%d nS\n",
- (data[9] >> 4) & 0x0F, data[9] & 0x0F);
- printf("SDRAM access time %d.%d nS\n",
- (data[10] >> 4) & 0x0F, data[10] & 0x0F);
+
+ switch (type) {
+ case DDR2:
+ printf("SDRAM cycle time %d.",
+ (data[9] >> 4) & 0x0F);
+ switch (data[9] & 0x0F) {
+ case 0x0:
+ case 0x1:
+ case 0x2:
+ case 0x3:
+ case 0x4:
+ case 0x5:
+ case 0x6:
+ case 0x7:
+ case 0x8:
+ case 0x9:
+ printf("%d ns\n", data[9] & 0x0F);
+ break;
+ case 0xA:
+ puts("25 ns\n");
+ break;
+ case 0xB:
+ puts("33 ns\n");
+ break;
+ case 0xC:
+ puts("66 ns\n");
+ break;
+ case 0xD:
+ puts("75 ns\n");
+ break;
+ default:
+ puts("?? ns\n");
+ break;
+ }
+ break;
+ default:
+ printf("SDRAM cycle time %d.%d nS\n",
+ (data[9] >> 4) & 0x0F, data[9] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf("SDRAM access time 0.%d%d ns\n",
+ (data[10] >> 4) & 0x0F, data[10] & 0x0F);
+ break;
+ default:
+ printf("SDRAM access time %d.%d nS\n",
+ (data[10] >> 4) & 0x0F, data[10] & 0x0F);
+ break;
+ }
+
puts ("EDC configuration ");
switch(data[11]) {
case 0: puts ("None\n"); break;
@@ -739,28 +819,51 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else
puts ("Self refresh, rate ");
switch(data[12] & 0x7F) {
- case 0: puts ("15.625uS\n"); break;
- case 1: puts ("3.9uS\n"); break;
- case 2: puts ("7.8uS\n"); break;
- case 3: puts ("31.3uS\n"); break;
- case 4: puts ("62.5uS\n"); break;
- case 5: puts ("125uS\n"); break;
+ case 0: puts ("15.625 uS\n"); break;
+ case 1: puts ("3.9 uS\n"); break;
+ case 2: puts ("7.8 uS \n"); break;
+ case 3: puts ("31.3 uS\n"); break;
+ case 4: puts ("62.5 uS\n"); break;
+ case 5: puts ("125 uS\n"); break;
default: puts ("unknown\n"); break;
}
- printf("SDRAM width (primary) %d\n", data[13] & 0x7F);
- if ((data[13] & 0x80) != 0) {
- printf(" (second bank) %d\n",
- 2 * (data[13] & 0x7F));
- }
- if (data[14] != 0) {
- printf("EDC width %d\n",
- data[14] & 0x7F);
- if ((data[14] & 0x80) != 0)
+
+ switch (type) {
+ case DDR2:
+ printf("SDRAM width (primary) %d\n", data[13]);
+ break;
+ default:
+ printf("SDRAM width (primary) %d\n", data[13] & 0x7F);
+ if ((data[13] & 0x80) != 0) {
printf(" (second bank) %d\n",
- 2 * (data[14] & 0x7F));
+ 2 * (data[13] & 0x7F));
+ }
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ if (data[14] != 0)
+ printf("EDC width %d\n", data[14]);
+ break;
+ default:
+ if (data[14] != 0) {
+ printf("EDC width %d\n",
+ data[14] & 0x7F);
+
+ if ((data[14] & 0x80) != 0) {
+ printf(" (second bank) %d\n",
+ 2 * (data[14] & 0x7F));
+ }
+ }
+ break;
}
- printf("Min clock delay, back-to-back random column addresses %d\n",
- data[15]);
+
+ if (DDR2 != type ) {
+ printf("Min clock delay, back-to-back random column addresses "
+ "%d\n", data[15]);
+ }
+
puts ("Burst length(s) ");
if (data[16] & 0x80) puts (" Page");
if (data[16] & 0x08) puts (" 8");
@@ -769,91 +872,363 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (data[16] & 0x01) puts (" 1");
putc ('\n');
printf("Number of banks %d\n", data[17]);
- puts ("CAS latency(s) ");
- if (data[18] & 0x80) puts (" TBD");
- if (data[18] & 0x40) puts (" 7");
- if (data[18] & 0x20) puts (" 6");
- if (data[18] & 0x10) puts (" 5");
- if (data[18] & 0x08) puts (" 4");
- if (data[18] & 0x04) puts (" 3");
- if (data[18] & 0x02) puts (" 2");
- if (data[18] & 0x01) puts (" 1");
- putc ('\n');
- puts ("CS latency(s) ");
- if (data[19] & 0x80) puts (" TBD");
- if (data[19] & 0x40) puts (" 6");
- if (data[19] & 0x20) puts (" 5");
- if (data[19] & 0x10) puts (" 4");
- if (data[19] & 0x08) puts (" 3");
- if (data[19] & 0x04) puts (" 2");
- if (data[19] & 0x02) puts (" 1");
- if (data[19] & 0x01) puts (" 0");
- putc ('\n');
- puts ("WE latency(s) ");
- if (data[20] & 0x80) puts (" TBD");
- if (data[20] & 0x40) puts (" 6");
- if (data[20] & 0x20) puts (" 5");
- if (data[20] & 0x10) puts (" 4");
- if (data[20] & 0x08) puts (" 3");
- if (data[20] & 0x04) puts (" 2");
- if (data[20] & 0x02) puts (" 1");
- if (data[20] & 0x01) puts (" 0");
- putc ('\n');
- puts ("Module attributes:\n");
- if (!data[21]) puts (" (none)\n");
- if (data[21] & 0x80) puts (" TBD (bit 7)\n");
- if (data[21] & 0x40) puts (" Redundant row address\n");
- if (data[21] & 0x20) puts (" Differential clock input\n");
- if (data[21] & 0x10) puts (" Registerd DQMB inputs\n");
- if (data[21] & 0x08) puts (" Buffered DQMB inputs\n");
- if (data[21] & 0x04) puts (" On-card PLL\n");
- if (data[21] & 0x02) puts (" Registered address/control lines\n");
- if (data[21] & 0x01) puts (" Buffered address/control lines\n");
- puts ("Device attributes:\n");
- if (data[22] & 0x80) puts (" TBD (bit 7)\n");
- if (data[22] & 0x40) puts (" TBD (bit 6)\n");
- if (data[22] & 0x20) puts (" Upper Vcc tolerance 5%\n");
- else puts (" Upper Vcc tolerance 10%\n");
- if (data[22] & 0x10) puts (" Lower Vcc tolerance 5%\n");
- else puts (" Lower Vcc tolerance 10%\n");
- if (data[22] & 0x08) puts (" Supports write1/read burst\n");
- if (data[22] & 0x04) puts (" Supports precharge all\n");
- if (data[22] & 0x02) puts (" Supports auto precharge\n");
- if (data[22] & 0x01) puts (" Supports early RAS# precharge\n");
- printf("SDRAM cycle time (2nd highest CAS latency) %d.%d nS\n",
- (data[23] >> 4) & 0x0F, data[23] & 0x0F);
- printf("SDRAM access from clock (2nd highest CAS latency) %d.%d nS\n",
- (data[24] >> 4) & 0x0F, data[24] & 0x0F);
- printf("SDRAM cycle time (3rd highest CAS latency) %d.%d nS\n",
- (data[25] >> 4) & 0x0F, data[25] & 0x0F);
- printf("SDRAM access from clock (3rd highest CAS latency) %d.%d nS\n",
- (data[26] >> 4) & 0x0F, data[26] & 0x0F);
- printf("Minimum row precharge %d nS\n", data[27]);
- printf("Row active to row active min %d nS\n", data[28]);
- printf("RAS to CAS delay min %d nS\n", data[29]);
+
+ switch (type) {
+ case DDR2:
+ puts ("CAS latency(s) ");
+ if (data[18] & 0x83) puts (" TBD");
+ if (data[18] & 0x40) puts (" 6");
+ if (data[18] & 0x20) puts (" 5");
+ if (data[18] & 0x10) puts (" 4");
+ if (data[18] & 0x08) puts (" 3");
+ if (data[18] & 0x04) puts (" 2");
+ putc ('\n');
+ break;
+ default:
+ puts ("CAS latency(s) ");
+ if (data[18] & 0x80) puts (" TBD");
+ if (data[18] & 0x40) puts (" 7");
+ if (data[18] & 0x20) puts (" 6");
+ if (data[18] & 0x10) puts (" 5");
+ if (data[18] & 0x08) puts (" 4");
+ if (data[18] & 0x04) puts (" 3");
+ if (data[18] & 0x02) puts (" 2");
+ if (data[18] & 0x01) puts (" 1");
+ putc ('\n');
+ break;
+ }
+
+ if (DDR2 != type) {
+ puts ("CS latency(s) ");
+ if (data[19] & 0x80) puts (" TBD");
+ if (data[19] & 0x40) puts (" 6");
+ if (data[19] & 0x20) puts (" 5");
+ if (data[19] & 0x10) puts (" 4");
+ if (data[19] & 0x08) puts (" 3");
+ if (data[19] & 0x04) puts (" 2");
+ if (data[19] & 0x02) puts (" 1");
+ if (data[19] & 0x01) puts (" 0");
+ putc ('\n');
+ }
+
+ if (DDR2 != type) {
+ puts ("WE latency(s) ");
+ if (data[20] & 0x80) puts (" TBD");
+ if (data[20] & 0x40) puts (" 6");
+ if (data[20] & 0x20) puts (" 5");
+ if (data[20] & 0x10) puts (" 4");
+ if (data[20] & 0x08) puts (" 3");
+ if (data[20] & 0x04) puts (" 2");
+ if (data[20] & 0x02) puts (" 1");
+ if (data[20] & 0x01) puts (" 0");
+ putc ('\n');
+ }
+
+ switch (type) {
+ case DDR2:
+ puts ("Module attributes:\n");
+ if (data[21] & 0x80)
+ puts (" TBD (bit 7)\n");
+ if (data[21] & 0x40)
+ puts (" Analysis probe installed\n");
+ if (data[21] & 0x20)
+ puts (" TBD (bit 5)\n");
+ if (data[21] & 0x10)
+ puts (" FET switch external enable\n");
+ printf(" %d PLLs on DIMM\n", (data[21] >> 2) & 0x03);
+ if (data[20] & 0x11) {
+ printf(" %d active registers on DIMM\n",
+ (data[21] & 0x03) + 1);
+ }
+ break;
+ default:
+ puts ("Module attributes:\n");
+ if (!data[21])
+ puts (" (none)\n");
+ if (data[21] & 0x80)
+ puts (" TBD (bit 7)\n");
+ if (data[21] & 0x40)
+ puts (" Redundant row address\n");
+ if (data[21] & 0x20)
+ puts (" Differential clock input\n");
+ if (data[21] & 0x10)
+ puts (" Registerd DQMB inputs\n");
+ if (data[21] & 0x08)
+ puts (" Buffered DQMB inputs\n");
+ if (data[21] & 0x04)
+ puts (" On-card PLL\n");
+ if (data[21] & 0x02)
+ puts (" Registered address/control lines\n");
+ if (data[21] & 0x01)
+ puts (" Buffered address/control lines\n");
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ if (data[22] & 0x80) puts (" TBD (bit 7)\n");
+ if (data[22] & 0x40) puts (" TBD (bit 6)\n");
+ if (data[22] & 0x20) puts (" TBD (bit 5)\n");
+ if (data[22] & 0x10) puts (" TBD (bit 4)\n");
+ if (data[22] & 0x08) puts (" TBD (bit 3)\n");
+ if (data[22] & 0x04)
+ puts (" Supports parital array self refresh\n");
+ if (data[22] & 0x02)
+ puts (" Supports 50 ohm ODT\n");
+ if (data[22] & 0x01)
+ puts (" Supports weak driver\n");
+ break;
+ default:
+ puts ("Device attributes:\n");
+ if (data[22] & 0x80) puts (" TBD (bit 7)\n");
+ if (data[22] & 0x40) puts (" TBD (bit 6)\n");
+ if (data[22] & 0x20) puts (" Upper Vcc tolerance 5%\n");
+ else puts (" Upper Vcc tolerance 10%\n");
+ if (data[22] & 0x10) puts (" Lower Vcc tolerance 5%\n");
+ else puts (" Lower Vcc tolerance 10%\n");
+ if (data[22] & 0x08) puts (" Supports write1/read burst\n");
+ if (data[22] & 0x04) puts (" Supports precharge all\n");
+ if (data[22] & 0x02) puts (" Supports auto precharge\n");
+ if (data[22] & 0x01) puts (" Supports early RAS# precharge\n");
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf("SDRAM cycle time (2nd highest CAS latency) %d.",
+ (data[23] >> 4) & 0x0F);
+
+ switch (data[23] & 0x0F) {
+ case 0x0:
+ case 0x1:
+ case 0x2:
+ case 0x3:
+ case 0x4:
+ case 0x5:
+ case 0x6:
+ case 0x7:
+ case 0x8:
+ case 0x9:
+ printf("%d ns\n", data[23] & 0x0F);
+ break;
+ case 0xA:
+ puts("25 ns\n");
+ break;
+ case 0xB:
+ puts("33 ns\n");
+ break;
+ case 0xC:
+ puts("66 ns\n");
+ break;
+ case 0xD:
+ puts("75 ns\n");
+ break;
+ default:
+ puts("?? ns\n");
+ break;
+ }
+ break;
+ default:
+ printf("SDRAM cycle time (2nd highest CAS latency) %d."
+ "%d nS\n", (data[23] >> 4) & 0x0F, data[23] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf("SDRAM access from clock (2nd highest CAS latency) 0."
+ "%d%d ns\n", (data[24] >> 4) & 0x0F, data[24] & 0x0F);
+ break;
+ default:
+ printf("SDRAM access from clock (2nd highest CAS latency) %d."
+ "%d nS\n", (data[24] >> 4) & 0x0F, data[24] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf("SDRAM cycle time (3rd highest CAS latency) %d.",
+ (data[25] >> 4) & 0x0F);
+
+ switch (data[25] & 0x0F) {
+ case 0x0:
+ case 0x1:
+ case 0x2:
+ case 0x3:
+ case 0x4:
+ case 0x5:
+ case 0x6:
+ case 0x7:
+ case 0x8:
+ case 0x9:
+ printf("%d ns\n", data[25] & 0x0F);
+ break;
+ case 0xA:
+ puts("25 ns\n");
+ break;
+ case 0xB:
+ puts("33 ns\n");
+ break;
+ case 0xC:
+ puts("66 ns\n");
+ break;
+ case 0xD:
+ puts("75 ns\n");
+ break;
+ default:
+ puts("?? ns\n");
+ break;
+ }
+ break;
+ default:
+ printf("SDRAM cycle time (3rd highest CAS latency) %d."
+ "%d nS\n", (data[25] >> 4) & 0x0F, data[25] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf("SDRAM access from clock (3rd highest CAS latency) 0."
+ "%d%d ns\n", (data[26] >> 4) & 0x0F, data[26] & 0x0F);
+ break;
+ default:
+ printf("SDRAM access from clock (3rd highest CAS latency) %d."
+ "%d nS\n", (data[26] >> 4) & 0x0F, data[26] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf("Minimum row precharge %d", data[27] >> 2);
+ switch (data[27] & 0x03) {
+ case 0x0: puts(".00 ns\n"); break;
+ case 0x1: puts(".25 ns\n"); break;
+ case 0x2: puts(".50 ns\n"); break;
+ case 0x3: puts(".75 ns\n"); break;
+ }
+ break;
+ default:
+ printf("Minimum row precharge %d nS\n", data[27]);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf("Row active to row active min %d", data[28] >> 2);
+ switch (data[28] & 0x03) {
+ case 0x0: puts(".00 ns\n"); break;
+ case 0x1: puts(".25 ns\n"); break;
+ case 0x2: puts(".50 ns\n"); break;
+ case 0x3: puts(".75 ns\n"); break;
+ }
+ break;
+ default:
+ printf("Row active to row active min %d nS\n", data[28]);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf("RAS to CAS delay min %d", data[29] >> 2);
+ switch (data[29] & 0x03) {
+ case 0x0: puts(".00 ns\n"); break;
+ case 0x1: puts(".25 ns\n"); break;
+ case 0x2: puts(".50 ns\n"); break;
+ case 0x3: puts(".75 ns\n"); break;
+ }
+ break;
+ default:
+ printf("RAS to CAS delay min %d nS\n", data[29]);
+ break;
+ }
+
printf("Minimum RAS pulse width %d nS\n", data[30]);
- puts ("Density of each row ");
- if (data[31] & 0x80) puts (" 512");
- if (data[31] & 0x40) puts (" 256");
- if (data[31] & 0x20) puts (" 128");
- if (data[31] & 0x10) puts (" 64");
- if (data[31] & 0x08) puts (" 32");
- if (data[31] & 0x04) puts (" 16");
- if (data[31] & 0x02) puts (" 8");
- if (data[31] & 0x01) puts (" 4");
- puts ("MByte\n");
- printf("Command and Address setup %c%d.%d nS\n",
- (data[32] & 0x80) ? '-' : '+',
- (data[32] >> 4) & 0x07, data[32] & 0x0F);
- printf("Command and Address hold %c%d.%d nS\n",
- (data[33] & 0x80) ? '-' : '+',
- (data[33] >> 4) & 0x07, data[33] & 0x0F);
- printf("Data signal input setup %c%d.%d nS\n",
- (data[34] & 0x80) ? '-' : '+',
- (data[34] >> 4) & 0x07, data[34] & 0x0F);
- printf("Data signal input hold %c%d.%d nS\n",
- (data[35] & 0x80) ? '-' : '+',
- (data[35] >> 4) & 0x07, data[35] & 0x0F);
+
+ switch (type) {
+ case DDR2:
+ puts ("Density of each row ");
+ if (data[31] & 0x80) puts (" 512 MiB\n");
+ if (data[31] & 0x40) puts (" 256 MiB\n");
+ if (data[31] & 0x20) puts (" 128 MiB\n");
+ if (data[31] & 0x10) puts (" 16 GiB\n");
+ if (data[31] & 0x08) puts (" 8 GiB\n");
+ if (data[31] & 0x04) puts (" 4 GiB\n");
+ if (data[31] & 0x02) puts (" 2 GiB\n");
+ if (data[31] & 0x01) puts (" 1 GiB\n");
+ break;
+ default:
+ puts ("Density of each row ");
+ if (data[31] & 0x80) puts (" 512 MiB\n");
+ if (data[31] & 0x40) puts (" 256 MiB\n");
+ if (data[31] & 0x20) puts (" 128 MiB\n");
+ if (data[31] & 0x10) puts (" 64 MiB\n");
+ if (data[31] & 0x08) puts (" 32 MiB\n");
+ if (data[31] & 0x04) puts (" 16 MiB\n");
+ if (data[31] & 0x02) puts (" 8 MiB\n");
+ if (data[31] & 0x01) puts (" 4 MiB\n");
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ puts("Command and Address setup ");
+ if (data[32] >= 0xA0) {
+ printf("1.%d%d ns\n",
+ ((data[32] >> 4) & 0x0F) - 10, data[32] & 0x0F);
+ } else {
+ printf("0.%d%d ns\n",
+ ((data[32] >> 4) & 0x0F), data[32] & 0x0F);
+ }
+ break;
+ default:
+ printf("Command and Address setup %c%d.%d nS\n",
+ (data[32] & 0x80) ? '-' : '+',
+ (data[32] >> 4) & 0x07, data[32] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ puts("Command and Address hold ");
+ if (data[33] >= 0xA0) {
+ printf("1.%d%d ns\n",
+ ((data[33] >> 4) & 0x0F) - 10, data[33] & 0x0F);
+ } else {
+ printf("0.%d%d ns\n",
+ ((data[33] >> 4) & 0x0F), data[33] & 0x0F);
+ }
+ break;
+ default:
+ printf("Command and Address hold %c%d.%d nS\n",
+ (data[33] & 0x80) ? '-' : '+',
+ (data[33] >> 4) & 0x07, data[33] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf("Data signal input setup 0.%d%d ns\n",
+ (data[34] >> 4) & 0x0F, data[34] & 0x0F);
+ break;
+ default:
+ printf("Data signal input setup %c%d.%d nS\n",
+ (data[34] & 0x80) ? '-' : '+',
+ (data[34] >> 4) & 0x07, data[34] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf("Data signal input hold 0.%d%d ns\n",
+ (data[35] >> 4) & 0x0F, data[35] & 0x0F);
+ break;
+ default:
+ printf("Data signal input hold %c%d.%d nS\n",
+ (data[35] & 0x80) ? '-' : '+',
+ (data[35] >> 4) & 0x07, data[35] & 0x0F);
+ break;
+ }
+
puts ("Manufacturer's JEDEC ID ");
for (j = 64; j <= 71; j++)
printf("%02X ", data[j]);
@@ -869,9 +1244,11 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
for (j = 95; j <= 98; j++)
printf("%02X ", data[j]);
putc ('\n');
- printf("Speed rating PC%d\n",
- data[126] == 0x66 ? 66 : data[126]);
+ if (DDR2 != type) {
+ printf("Speed rating PC%d\n",
+ data[126] == 0x66 ? 66 : data[126]);
+ }
return 0;
}
#endif