Move all command code into its own directory

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>

1 files changed, 0 insertions, 586 deletions

diff --git a/common/Kconfig b/common/Kconfig
index 9d446bf..067545d 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -1,522 +1,3 @@
-menu "Command line interface"
-
-config HUSH_PARSER
-	bool "Use hush shell"
-	select SYS_HUSH_PARSER
-	help
-	  This option enables the "hush" shell (from Busybox) as command line
-	  interpreter, thus enabling powerful command line syntax like
-	  if...then...else...fi conditionals or `&&' and '||'
-	  constructs ("shell scripts").
-
-	  If disabled, you get the old, much simpler behaviour with a somewhat
-	  smaller memory footprint.
-
-config SYS_HUSH_PARSER
-	bool
-	help
-	  Backward compatibility.
-
-config SYS_PROMPT
-	string "Shell prompt"
-	default "=> "
-	help
-	  This string is displayed in the command line to the left of the
-	  cursor.
-
-menu "Autoboot options"
-
-config AUTOBOOT_KEYED
-	bool "Stop autobooting via specific input key / string"
-	default n
-	help
-	  This option enables stopping (aborting) of the automatic
-	  boot feature only by issuing a specific input key or
-	  string. If not enabled, any input key will abort the
-	  U-Boot automatic booting process and bring the device
-	  to the U-Boot prompt for user input.
-
-config AUTOBOOT_PROMPT
-	string "Autoboot stop prompt"
-	depends on AUTOBOOT_KEYED
-	default "Autoboot in %d seconds\\n"
-	help
-	  This string is displayed before the boot delay selected by
-	  CONFIG_BOOTDELAY starts. If it is not defined	there is no
-	  output indicating that autoboot is in progress.
-
-	  Note that this define is used as the (only) argument to a
-	  printf() call, so it may contain '%' format specifications,
-	  provided that it also includes, sepearated by commas exactly
-	  like in a printf statement, the required arguments. It is
-	  the responsibility of the user to select only such arguments
-	  that are valid in the given context.
-
-config AUTOBOOT_ENCRYPTION
-	bool "Enable encryption in autoboot stopping"
-	depends on AUTOBOOT_KEYED
-	default n
-
-config AUTOBOOT_DELAY_STR
-	string "Delay autobooting via specific input key / string"
-	depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
-	help
-	  This option delays the automatic boot feature by issuing
-	  a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
-	  or the environment variable "bootdelaykey" is specified
-	  and this string is received from console input before
-	  autoboot starts booting, U-Boot gives a command prompt. The
-	  U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
-	  used, otherwise it never times out.
-
-config AUTOBOOT_STOP_STR
-	string "Stop autobooting via specific input key / string"
-	depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
-	help
-	  This option enables stopping (aborting) of the automatic
-	  boot feature only by issuing a specific input key or
-	  string. If CONFIG_AUTOBOOT_STOP_STR or the environment
-	  variable "bootstopkey" is specified and this string is
-	  received from console input before autoboot starts booting,
-	  U-Boot gives a command prompt. The U-Boot prompt never
-	  times out, even if CONFIG_BOOT_RETRY_TIME is used.
-
-config AUTOBOOT_KEYED_CTRLC
-	bool "Enable Ctrl-C autoboot interruption"
-	depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
-	default n
-	help
-	  This option allows for the boot sequence to be interrupted
-	  by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
-	  Setting this variable	provides an escape sequence from the
-	  limited "password" strings.
-
-config AUTOBOOT_STOP_STR_SHA256
-	string "Stop autobooting via SHA256 encrypted password"
-	depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
-	help
-	  This option adds the feature to only stop the autobooting,
-	  and therefore boot into the U-Boot prompt, when the input
-	  string / password matches a values that is encypted via
-	  a SHA256 hash and saved in the environment.
-
-endmenu
-
-comment "Commands"
-
-menu "Info commands"
-
-config CMD_BDI
-	bool "bdinfo"
-	default y
-	help
-	  Print board info
-
-config CMD_CONSOLE
-	bool "coninfo"
-	default y
-	help
-	  Print console devices and information.
-
-config CMD_CPU
-	bool "cpu"
-	help
-	  Print information about available CPUs. This normally shows the
-	  number of CPUs, type (e.g. manufacturer, architecture, product or
-	  internal name) and clock frequency. Other information may be
-	  available depending on the CPU driver.
-
-config CMD_LICENSE
-	bool "license"
-	help
-	  Print GPL license text
-
-endmenu
-
-menu "Boot commands"
-
-config CMD_BOOTD
-	bool "bootd"
-	default y
-	help
-	  Run the command stored in the environment "bootcmd", i.e.
-	  "bootd" does the same thing as "run bootcmd".
-
-config CMD_BOOTM
-	bool "bootm"
-	default y
-	help
-	  Boot an application image from the memory.
-
-config CMD_ELF
-	bool "bootelf, bootvx"
-	default y
-	help
-	  Boot an ELF/vxWorks image from the memory.
-
-config CMD_GO
-	bool "go"
-	default y
-	help
-	  Start an application at a given address.
-
-config CMD_RUN
-	bool "run"
-	default y
-	help
-	  Run the command in the given environment variable.
-
-config CMD_IMI
-	bool "iminfo"
-	default y
-	help
-	  Print header information for application image.
-
-config CMD_IMLS
-	bool "imls"
-	default y
-	help
-	  List all images found in flash
-
-config CMD_XIMG
-	bool "imxtract"
-	default y
-	help
-	  Extract a part of a multi-image.
-
-config CMD_POWEROFF
-	bool
-
-endmenu
-
-menu "Environment commands"
-
-config CMD_EXPORTENV
-	bool "env export"
-	default y
-	help
-	  Export environments.
-
-config CMD_IMPORTENV
-	bool "env import"
-	default y
-	help
-	  Import environments.
-
-config CMD_EDITENV
-	bool "editenv"
-	default y
-	help
-	  Edit environment variable.
-
-config CMD_SAVEENV
-	bool "saveenv"
-	default y
-	help
-	  Save all environment variables into the compiled-in persistent
-	  storage.
-
-config CMD_ENV_EXISTS
-	bool "env exists"
-	default y
-	help
-	  Check if a variable is defined in the environment for use in
-	  shell scripting.
-
-endmenu
-
-menu "Memory commands"
-
-config CMD_MEMORY
-	bool "md, mm, nm, mw, cp, cmp, base, loop"
-	default y
-	help
-	  Memeory commands.
-	    md - memory display
-	    mm - memory modify (auto-incrementing address)
-	    nm - memory modify (constant address)
-	    mw - memory write (fill)
-	    cp - memory copy
-	    cmp - memory compare
-	    base - print or set address offset
-	    loop - initinite loop on address range
-
-config CMD_CRC32
-	bool "crc32"
-	default y
-	help
-	  Compute CRC32.
-
-config LOOPW
-	bool "loopw"
-	help
-	  Infinite write loop on address range
-
-config CMD_MEMTEST
-	bool "memtest"
-	help
-	  Simple RAM read/write test.
-
-config CMD_MX_CYCLIC
-	bool "mdc, mwc"
-	help
-	  mdc - memory display cyclic
-	  mwc - memory write cyclic
-
-config CMD_MEMINFO
-	bool "meminfo"
-	help
-	  Display memory information.
-
-endmenu
-
-menu "Device access commands"
-
-config CMD_DM
-	bool "dm - Access to driver model information"
-	depends on DM
-	default y
-	help
-	  Provides access to driver model data structures and information,
-	  such as a list of devices, list of uclasses and the state of each
-	  device (e.g. activated). This is not required for operation, but
-	  can be useful to see the state of driver model for debugging or
-	  interest.
-
-config CMD_DEMO
-	bool "demo - Demonstration commands for driver model"
-	depends on DM
-	help
-	  Provides a 'demo' command which can be used to play around with
-	  driver model. To use this properly you will need to enable one or
-	  both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
-	  Otherwise you will always get an empty list of devices. The demo
-	  devices are defined in the sandbox device tree, so the easiest
-	  option is to use sandbox and pass the -d point to sandbox's
-	  u-boot.dtb file.
-
-config CMD_LOADB
-	bool "loadb"
-	default y
-	help
-	  Load a binary file over serial line.
-
-config CMD_LOADS
-	bool "loads"
-	default y
-	help
-	  Load an S-Record file over serial line
-
-config CMD_FLASH
-	bool "flinfo, erase, protect"
-	default y
-	help
-	  NOR flash support.
-	    flinfo - print FLASH memory information
-	    erase - FLASH memory
-	    protect - enable or disable FLASH write protection
-
-config CMD_ARMFLASH
-	depends on FLASH_CFI_DRIVER
-	bool "armflash"
-	help
-	  ARM Ltd reference designs flash partition access
-
-config CMD_NAND
-	bool "nand"
-	help
-	  NAND support.
-
-config CMD_SF
-	bool "sf"
-	help
-	  SPI Flash support
-
-config CMD_SPI
-	bool "sspi"
-	help
-	  SPI utility command.
-
-config CMD_I2C
-	bool "i2c"
-	help
-	  I2C support.
-
-config CMD_USB
-	bool "usb"
-	help
-	  USB support.
-
-config CMD_FPGA
-	bool "fpga"
-	default y
-	help
-	  FPGA support.
-
-config CMD_REMOTEPROC
-	bool "remoteproc"
-	depends on REMOTEPROC
-	help
-	  Support for Remote Processor control
-
-config CMD_GPIO
-	bool "gpio"
-	help
-	  GPIO support.
-
-endmenu
-
-
-menu "Shell scripting commands"
-
-config CMD_ECHO
-	bool "echo"
-	default y
-	help
-	  Echo args to console
-
-config CMD_ITEST
-	bool "itest"
-	default y
-	help
-	  Return true/false on integer compare.
-
-config CMD_SOURCE
-	bool "source"
-	default y
-	help
-	  Run script from memory
-
-config CMD_SETEXPR
-	bool "setexpr"
-	default y
-	help
-	  Evaluate boolean and math expressions and store the result in an env
-	    variable.
-	  Also supports loading the value at a memory location into a variable.
-	  If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
-
-endmenu
-
-menu "Network commands"
-
-config CMD_NET
-	bool "bootp, tftpboot"
-        select NET
-	default y
-	help
-	  Network commands.
-	  bootp - boot image via network using BOOTP/TFTP protocol
-	  tftpboot - boot image via network using TFTP protocol
-
-config CMD_TFTPPUT
-	bool "tftp put"
-	help
-	  TFTP put command, for uploading files to a server
-
-config CMD_TFTPSRV
-	bool "tftpsrv"
-	help
-	  Act as a TFTP server and boot the first received file
-
-config CMD_RARP
-	bool "rarpboot"
-	help
-	  Boot image via network using RARP/TFTP protocol
-
-config CMD_DHCP
-	bool "dhcp"
-	help
-	  Boot image via network using DHCP/TFTP protocol
-
-config CMD_NFS
-	bool "nfs"
-	default y
-	help
-	  Boot image via network using NFS protocol.
-
-config CMD_PING
-	bool "ping"
-	help
-	  Send ICMP ECHO_REQUEST to network host
-
-config CMD_CDP
-	bool "cdp"
-	help
-	  Perform CDP network configuration
-
-config CMD_SNTP
-	bool "sntp"
-	help
-	  Synchronize RTC via network
-
-config CMD_DNS
-	bool "dns"
-	help
-	  Lookup the IP of a hostname
-
-config CMD_LINK_LOCAL
-	bool "linklocal"
-	help
-	  Acquire a network IP address using the link-local protocol
-
-endmenu
-
-menu "Misc commands"
-
-config CMD_AMBAPP
-	bool "ambapp"
-	depends on LEON3
-	default y
-	help
-	  Lists AMBA Plug-n-Play information.
-
-config SYS_AMBAPP_PRINT_ON_STARTUP
-	bool "Show AMBA PnP info on startup"
-	depends on CMD_AMBAPP
-	default n
-	help
-	  Show AMBA Plug-n-Play information on startup.
-
-config CMD_TIME
-	bool "time"
-	help
-	  Run commands and summarize execution time.
-
-# TODO: rename to CMD_SLEEP
-config CMD_MISC
-	bool "sleep"
-	default y
-	help
-	  Delay execution for some time
-
-config CMD_TIMER
-	bool "timer"
-	help
-	  Access the system timer.
-
-config CMD_SETGETDCR
-	bool "getdcr, setdcr, getidcr, setidcr"
-	depends on 4xx
-	default y
-	help
-	  getdcr - Get an AMCC PPC 4xx DCR's value
-	  setdcr - Set an AMCC PPC 4xx DCR's value
-	  getidcr - Get a register value via indirect DCR addressing
-	  setidcr - Set a register value via indirect DCR addressing
-
-config CMD_SOUND
-	bool "sound"
-	depends on SOUND
-	help
-	  This provides basic access to the U-Boot's sound support. The main
-	  feature is to play a beep.
-
-	     sound init   - set up sound system
-	     sound play   - play a sound
-
-endmenu
-
 menu "Boot timing"
 
 config BOOTSTAGE
@@ -565,13 +46,6 @@ config BOOTSTAGE_USER_COUNT
 	  a new ID will be allocated from this stash. If you exceed
 	  the limit, recording will stop.
 
-config CMD_BOOTSTAGE
-	bool "Enable the 'bootstage' command"
-	depends on BOOTSTAGE
-	help
-	  Add a 'bootstage' command which supports printing a report
-	  and un/stashing of bootstage data.
-
 config BOOTSTAGE_FDT
 	bool "Store boot timing information in the OS device tree"
 	depends on BOOTSTAGE
@@ -623,66 +97,6 @@ config BOOTSTAGE_STASH_SIZE
 
 endmenu
 
-menu "Power commands"
-config CMD_PMIC
-	bool "Enable Driver Model PMIC command"
-	depends on DM_PMIC
-	help
-	  This is the pmic command, based on a driver model pmic's API.
-	  Command features are unchanged:
-	  - list               - list pmic devices
-	  - pmic dev <id>      - show or [set] operating pmic device (NEW)
-	  - pmic dump          - dump registers
-	  - pmic read address  - read byte of register at address
-	  - pmic write address - write byte to register at address
-	  The only one change for this command is 'dev' subcommand.
-
-config CMD_REGULATOR
-	bool "Enable Driver Model REGULATOR command"
-	depends on DM_REGULATOR
-	help
-	  This command is based on driver model regulator's API.
-	  User interface features:
-	  - list               - list regulator devices
-	  - regulator dev <id> - show or [set] operating regulator device
-	  - regulator info     - print constraints info
-	  - regulator status   - print operating status
-	  - regulator value <val] <-f> - print/[set] voltage value [uV]
-	  - regulator current <val>    - print/[set] current value [uA]
-	  - regulator mode <id>        - print/[set] operating mode id
-	  - regulator enable           - enable the regulator output
-	  - regulator disable          - disable the regulator output
-
-	  The '-f' (force) option can be used for set the value which exceeds
-	  the limits, which are found in device-tree and are kept in regulator's
-	  uclass platdata structure.
-
-endmenu
-
-menu "Security commands"
-config CMD_TPM
-	bool "Enable the 'tpm' command"
-	depends on TPM
-	help
-	  This provides a means to talk to a TPM from the command line. A wide
-	  range of commands if provided - see 'tpm help' for details. The
-	  command requires a suitable TPM on your board and the correct driver
-	  must be enabled.
-
-config CMD_TPM_TEST
-	bool "Enable the 'tpm test' command"
-	depends on CMD_TPM
-	help
-	  This provides a a series of tests to confirm that the TPM is working
-	  correctly. The tests cover initialisation, non-volatile RAM, extend,
-	  global lock and checking that timing is within expectations. The
-	  tests pass correctly on Infineon TPMs but may need to be adjusted
-	  for other devices.
-
-endmenu
-
-endmenu
-
 config CONSOLE_RECORD
 	bool "Console recording"
 	help