summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2009-05-24 17:06:54 +0200
committerWolfgang Denk <wd@denx.de>2009-06-12 20:47:16 +0200
commita89c33db96a1e55319a286dd4c3c05ca64ac6bfd (patch)
tree512938dbd159b7262aad30e4304cfc05c350226c /board
parent94796d8544d4248028141bad11c6a74b840e9d6e (diff)
downloadu-boot-imx-a89c33db96a1e55319a286dd4c3c05ca64ac6bfd.zip
u-boot-imx-a89c33db96a1e55319a286dd4c3c05ca64ac6bfd.tar.gz
u-boot-imx-a89c33db96a1e55319a286dd4c3c05ca64ac6bfd.tar.bz2
General help message cleanup
Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'board')
-rw-r--r--board/BuS/EB+MCF-EV123/EB+MCF-EV123.c2
-rw-r--r--board/ads5121/ads5121_diu.c2
-rw-r--r--board/amcc/acadia/cmd_acadia.c4
-rw-r--r--board/amcc/canyonlands/bootstrap.c4
-rw-r--r--board/amcc/katmai/cmd_katmai.c4
-rw-r--r--board/amcc/kilauea/cmd_pll.c4
-rw-r--r--board/amcc/luan/luan.c4
-rw-r--r--board/amcc/makalu/cmd_pll.c4
-rw-r--r--board/amcc/sequoia/cmd_sequoia.c4
-rw-r--r--board/amcc/taihu/lcd.c16
-rw-r--r--board/amcc/taihu/taihu.c8
-rw-r--r--board/amcc/taihu/update.c4
-rw-r--r--board/amcc/taishan/lcd.c14
-rw-r--r--board/amcc/taishan/showinfo.c6
-rw-r--r--board/amcc/taishan/update.c2
-rw-r--r--board/amcc/yucca/cmd_yucca.c2
-rw-r--r--board/amirix/ap1000/ap1000.c10
-rw-r--r--board/amirix/ap1000/powerspan.c2
-rw-r--r--board/barco/barco.c6
-rw-r--r--board/bc3450/cmd_bc3450.c23
-rw-r--r--board/bf537-stamp/cmd_bf537led.c4
-rw-r--r--board/cm5200/cmd_cm5200.c2
-rw-r--r--board/delta/delta.c2
-rw-r--r--board/esd/ar405/ar405.c13
-rw-r--r--board/esd/cms700/cms700.c5
-rw-r--r--board/esd/common/auto_update.c2
-rw-r--r--board/esd/common/cmd_loadpci.c4
-rw-r--r--board/esd/common/lcd.c2
-rw-r--r--board/esd/common/xilinx_jtag/micro.c2
-rw-r--r--board/esd/cpci2dp/cpci2dp.c4
-rw-r--r--board/esd/cpci405/cpci405.c12
-rw-r--r--board/esd/cpci5200/cpci5200.c4
-rw-r--r--board/esd/cpci750/cpci750.c4
-rw-r--r--board/esd/dasa_sim/cmd_dasa_sim.c2
-rw-r--r--board/esd/du440/du440.c33
-rw-r--r--board/esd/hh405/hh405.c5
-rw-r--r--board/esd/ocrtc/cmd_ocrtc.c4
-rw-r--r--board/esd/pci405/cmd_pci405.c2
-rw-r--r--board/esd/pci405/pci405.c4
-rw-r--r--board/esd/pf5200/pf5200.c10
-rw-r--r--board/esd/plu405/plu405.c5
-rw-r--r--board/esd/pmc440/cmd_pmc440.c35
-rw-r--r--board/esd/tasreg/tasreg.c24
-rw-r--r--board/esd/voh405/voh405.c5
-rw-r--r--board/evb64260/zuma_pbb.c4
-rw-r--r--board/freescale/common/pixis.c28
-rw-r--r--board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c4
-rw-r--r--board/g2000/g2000.c6
-rw-r--r--board/hymod/bsp.c4
-rw-r--r--board/inka4x0/inkadiag.c10
-rw-r--r--board/keymile/common/keymile_hdlc_enet.c4
-rw-r--r--board/lwmon/lwmon.c6
-rw-r--r--board/lwmon5/kbd.c2
-rw-r--r--board/lwmon5/lwmon5.c2
-rw-r--r--board/micronas/vct/smc_eeprom.c6
-rw-r--r--board/mpl/mip405/cmd_mip405.c2
-rw-r--r--board/mpl/pati/cmd_pati.c2
-rw-r--r--board/mpl/pip405/cmd_pip405.c2
-rw-r--r--board/mpl/vcma9/cmd_vcma9.c2
-rw-r--r--board/pcippc2/pcippc2.c2
-rw-r--r--board/pcs440ep/pcs440ep.c4
-rw-r--r--board/pn62/cmd_pn62.c6
-rw-r--r--board/prodrive/pdnb3/pdnb3.c2
-rw-r--r--board/pxa255_idp/pxa_idp.c2
-rw-r--r--board/r360mpi/r360mpi.c2
-rw-r--r--board/renesas/sh7785lcr/rtl8169_mac.c4
-rw-r--r--board/renesas/sh7785lcr/selfcheck.c2
-rw-r--r--board/renesas/sh7785lcr/sh7785lcr.c2
-rw-r--r--board/sandburst/common/ppc440gx_i2c.c2
-rw-r--r--board/sandburst/karef/karef.c4
-rw-r--r--board/sandburst/metrobox/metrobox.c4
-rw-r--r--board/siemens/common/fpga.c2
-rw-r--r--board/siemens/pcu_e/pcu_e.c8
-rw-r--r--board/ssv/common/cmd_sled.c2
-rw-r--r--board/ssv/common/wd_pio.c2
-rw-r--r--board/tqc/tqm5200/cmd_stk52xx.c13
-rw-r--r--board/tqc/tqm5200/cmd_tb5200.c4
-rw-r--r--board/tqc/tqm8272/tqm8272.c2
-rw-r--r--board/trab/cmd_trab.c12
-rw-r--r--board/trab/trab.c2
-rw-r--r--board/trizepsiv/eeprom.c3
-rw-r--r--board/w7o/cmd_vpd.c2
-rw-r--r--board/zeus/update.c2
-rw-r--r--board/zeus/zeus.c4
84 files changed, 252 insertions, 240 deletions
diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
index 02a095e..73dfb3d 100644
--- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
+++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
@@ -156,7 +156,7 @@ int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
vcimage, 2, 0, do_vcimage,
"loads an image to Display",
- "vcimage addr\n"
+ "vcimage addr"
);
/* EOF EB+MCF-EV123c */
diff --git a/board/ads5121/ads5121_diu.c b/board/ads5121/ads5121_diu.c
index 41a1353..1dd60af 100644
--- a/board/ads5121/ads5121_diu.c
+++ b/board/ads5121/ads5121_diu.c
@@ -131,7 +131,7 @@ U_BOOT_CMD(
diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp,
"Init or Display BMP file",
"init\n - initialize DIU\n"
- "addr\n - display bmp at address 'addr'\n"
+ "addr\n - display bmp at address 'addr'"
);
diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
index d47cf1a..c427f9e 100644
--- a/board/amcc/acadia/cmd_acadia.c
+++ b/board/amcc/acadia/cmd_acadia.c
@@ -97,5 +97,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 3, 0, do_bootstrap,
"program the I2C bootstrap EEPROM",
- "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n"
- );
+ "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM"
+);
diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c
index 30046fe..6dc2cca 100644
--- a/board/amcc/canyonlands/bootstrap.c
+++ b/board/amcc/canyonlands/bootstrap.c
@@ -191,5 +191,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap,
"program the I2C bootstrap EEPROM",
- "<nand|nor> - strap to boot from NAND or NOR flash\n"
- );
+ "<nand|nor> - strap to boot from NAND or NOR flash"
+);
diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c
index 2c2849b..335d30c 100644
--- a/board/amcc/katmai/cmd_katmai.c
+++ b/board/amcc/katmai/cmd_katmai.c
@@ -214,5 +214,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 3, 1, do_bootstrap,
"program the serial device strap",
- "wrclk [prom0|prom1] - program the serial device strap\n"
- );
+ "wrclk [prom0|prom1] - program the serial device strap"
+);
diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c
index 6b38493..9bae67e 100644
--- a/board/amcc/kilauea/cmd_pll.c
+++ b/board/amcc/kilauea/cmd_pll.c
@@ -291,7 +291,7 @@ U_BOOT_CMD(
RCONF: Read current eeprom configuration. \n\
-----------------------------------------------\n\
WTEST: Test EEPROM write with predefined values\n\
- -----------------------------------------------\n"
- );
+ -----------------------------------------------"
+);
#endif /* CONFIG_CMD_EEPROM */
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index d2a3b9e..7d02d90 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -331,5 +331,5 @@ U_BOOT_CMD(
l2cache, 2, 1, do_l2cache,
"enable or disable L2 cache",
"[on, off]\n"
- " - enable or disable L2 cache\n"
- );
+ " - enable or disable L2 cache"
+);
diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c
index 6b38493..9bae67e 100644
--- a/board/amcc/makalu/cmd_pll.c
+++ b/board/amcc/makalu/cmd_pll.c
@@ -291,7 +291,7 @@ U_BOOT_CMD(
RCONF: Read current eeprom configuration. \n\
-----------------------------------------------\n\
WTEST: Test EEPROM write with predefined values\n\
- -----------------------------------------------\n"
- );
+ -----------------------------------------------"
+);
#endif /* CONFIG_CMD_EEPROM */
diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c
index 6dfd8ba..01dd97c 100644
--- a/board/amcc/sequoia/cmd_sequoia.c
+++ b/board/amcc/sequoia/cmd_sequoia.c
@@ -227,5 +227,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap,
"program the I2C bootstrap EEPROM",
- "<nand|nor> - strap to boot from NAND or NOR flash\n"
- );
+ "<nand|nor> - strap to boot from NAND or NOR flash"
+);
diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c
index 6b68f33..c3dc983 100644
--- a/board/amcc/taihu/lcd.c
+++ b/board/amcc/taihu/lcd.c
@@ -233,25 +233,25 @@ static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
lcd_cls, 1, 1, do_lcd_clear,
"lcd clear display",
- NULL
- );
+ ""
+);
U_BOOT_CMD(
lcd_puts, 2, 1, do_lcd_puts,
"display string on lcd",
- "<string> - <string> to be displayed\n"
- );
+ "<string> - <string> to be displayed"
+);
U_BOOT_CMD(
lcd_putc, 2, 1, do_lcd_putc,
"display char on lcd",
- "<char> - <char> to be displayed\n"
- );
+ "<char> - <char> to be displayed"
+);
U_BOOT_CMD(
lcd_cur, 3, 1, do_lcd_cur,
"shift cursor on lcd",
"<count> <dir> - shift cursor on lcd <count> times, direction is <dir> \n"
" <count> - 0..31\n"
- " <dir> - 0=backward 1=forward\n"
- );
+ " <dir> - 0=backward 1=forward"
+);
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index 669429b..d8806ac 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -94,8 +94,8 @@ static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[])
U_BOOT_CMD (
sw2_stat, 1, 1, do_sw_stat,
"show status of switch 2",
- NULL
- );
+ ""
+);
static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[])
{
@@ -134,8 +134,8 @@ U_BOOT_CMD (
led_ctl, 3, 1, do_led_ctl,
"make led 1 or 2 on or off",
"<led_no> <on/off> - make led <led_no> on/off,\n"
- "\tled_no is 1 or 2\t"
- );
+ "\tled_no is 1 or 2"
+);
#define SPI_CS_GPIO0 0
#define SPI_SCLK_GPIO14 14
diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c
index 8e96905..f9c31b3 100644
--- a/board/amcc/taihu/update.c
+++ b/board/amcc/taihu/update.c
@@ -128,5 +128,5 @@ static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[]
U_BOOT_CMD (
update_boot_eeprom, 1, 1, update_boot_eeprom,
"update boot eeprom content",
- NULL
- );
+ ""
+);
diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c
index e4d0705..d432cc3 100644
--- a/board/amcc/taishan/lcd.c
+++ b/board/amcc/taishan/lcd.c
@@ -254,18 +254,18 @@ static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return 0;
}
-U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", NULL);
-U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", NULL);
+U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", "");
+U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", "");
U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts,
"display string on lcd",
- "<string> - <string> to be displayed\n");
+ "<string> - <string> to be displayed");
U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc,
"display char on lcd",
- "<char> - <char> to be displayed\n");
+ "<char> - <char> to be displayed");
U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur,
"shift cursor on lcd",
"<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n"
- " <count> - 0~31\n" " <dir> - 0,backward; 1, forward\n");
+ " <count> - 0~31\n" " <dir> - 0,backward; 1, forward");
#if 0 /* test-only */
void set_phy_loopback_mode(void)
@@ -373,8 +373,8 @@ static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(ledon, 1, 1, do_led_test_on,
- "led test light on", NULL);
+ "led test light on", "");
U_BOOT_CMD(ledoff, 1, 1, do_led_test_off,
- "led test light off", NULL);
+ "led test light off", "");
#endif
diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c
index b471c95..2a78a22 100644
--- a/board/amcc/taishan/showinfo.c
+++ b/board/amcc/taishan/showinfo.c
@@ -168,7 +168,7 @@ int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info,
- "Show PCIX bridge info", NULL);
+ "Show PCIX bridge info", "");
#define TAISHAN_PCI_DEV_ID0 0x800
#define TAISHAN_PCI_DEV_ID1 0x1000
@@ -222,7 +222,7 @@ int do_show_pcix_device_info(cmd_tbl_t * cmdtp, int flag, int argc,
}
U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info,
- "Show PCIX Device info", NULL);
+ "Show PCIX Device info", "");
extern void show_reset_reg(void);
@@ -233,4 +233,4 @@ int do_show_reset_reg_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info,
- "Show Reset REG info", NULL);
+ "Show Reset REG info", "");
diff --git a/board/amcc/taishan/update.c b/board/amcc/taishan/update.c
index 63f8744..aab3a65 100644
--- a/board/amcc/taishan/update.c
+++ b/board/amcc/taishan/update.c
@@ -74,5 +74,5 @@ int do_update_boot_eeprom(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom,
- "update bootstrap eeprom content", NULL);
+ "update bootstrap eeprom content", "");
#endif
diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c
index d2ca257..ed6daa3 100644
--- a/board/amcc/yucca/cmd_yucca.c
+++ b/board/amcc/yucca/cmd_yucca.c
@@ -282,5 +282,5 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
U_BOOT_CMD(
evb440spe, 3, 1, do_evb440spe,
"program the serial device strap",
- "wrclk [prom0|prom1] - program the serial device strap\n"
+ "wrclk [prom0|prom1] - program the serial device strap"
);
diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c
index fcf2698..cadfe0b 100644
--- a/board/amirix/ap1000/ap1000.c
+++ b/board/amirix/ap1000/ap1000.c
@@ -670,14 +670,14 @@ U_BOOT_CMD (temp, 6, 0, do_temp_sensor,
" - Set config options.\n"
"\n"
"All values can be decimal or hex (hex preceded with 0x).\n"
- "Only whole numbers are supported for external limits.\n");
+ "Only whole numbers are supported for external limits.");
#if 0
U_BOOT_CMD (loadace, 2, 0, do_loadace,
"load fpga configuration from System ACE compact flash",
"N\n"
" - Load configuration N (0-7) from System ACE compact flash\n"
- "loadace\n" " - loads default configuration\n");
+ "loadace\n" " - loads default configuration");
#endif
U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte,
@@ -685,19 +685,19 @@ U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte,
"N [ADDRESS]\n"
" - set software configuration byte to N, optionally use ADDRESS as\n"
" location of buffer for flash copy\n"
- "swconfig\n" " - display software configuration byte\n");
+ "swconfig\n" " - display software configuration byte");
U_BOOT_CMD (pause, 2, 0, do_pause,
"sleep processor until any key is pressed with poll time of N seconds",
"N\n"
" - sleep processor until any key is pressed with poll time of N seconds\n"
"pause\n"
- " - sleep processor until any key is pressed with poll time of 1 second\n");
+ " - sleep processor until any key is pressed with poll time of 1 second");
U_BOOT_CMD (swrecon, 1, 0, do_swreconfig,
"trigger a board reconfigure to the software selected configuration",
"\n"
- " - trigger a board reconfigure to the software selected configuration\n");
+ " - trigger a board reconfigure to the software selected configuration");
int board_eth_init(bd_t *bis)
{
diff --git a/board/amirix/ap1000/powerspan.c b/board/amirix/ap1000/powerspan.c
index f727061..28e2bbc 100644
--- a/board/amirix/ap1000/powerspan.c
+++ b/board/amirix/ap1000/powerspan.c
@@ -487,7 +487,7 @@ U_BOOT_CMD (eeprom, 4, 0, do_eeprom,
" - store contents of eeprom at address ADD\n"
"eeprom p ADD\n"
" - put data stored at address ADD into the eeprom\n"
- "eeprom d\n" " - return eeprom to default contents\n");
+ "eeprom d\n" " - return eeprom to default contents");
unsigned int PowerSpanRead (unsigned int theOffset)
{
diff --git a/board/barco/barco.c b/board/barco/barco.c
index a19e1ed..d7a0078 100644
--- a/board/barco/barco.c
+++ b/board/barco/barco.c
@@ -307,19 +307,19 @@ int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (
try_working, 1, 1, barcobcd_boot_image,
"check flash value and boot the appropriate image",
- "\n"
+ ""
);
U_BOOT_CMD (
boot_working, 1, 1, barcobcd_boot_image,
"check flash value and boot the appropriate image",
- "\n"
+ ""
);
U_BOOT_CMD (
boot_default, 1, 1, barcobcd_boot_image,
"check flash value and boot the appropriate image",
- "\n"
+ ""
);
/*
* We are not using serial communication, so just provide empty functions
diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c
index aa46e58..271ffb1 100644
--- a/board/bc3450/cmd_bc3450.c
+++ b/board/bc3450/cmd_bc3450.c
@@ -198,7 +198,7 @@ U_BOOT_CMD (dip, 1, 1, cmd_dip,
"\n"
" - prints the state of the dip switch and/or\n"
" external configuration inputs as hex value.\n"
- " - \"Config 1\" is the LSB\n");
+ " - \"Config 1\" is the LSB");
/*
@@ -229,7 +229,7 @@ static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (buz, 2, 1, cmd_buz,
"turns buzzer on/off",
- "\n" "buz <on/off>\n" " - turns the buzzer on or off\n");
+ "\n" "buz <on/off>\n" " - turns the buzzer on or off");
#endif /* CONFIG_BC3450_BUZZER */
@@ -326,14 +326,14 @@ U_BOOT_CMD (fp, 3, 1, cmd_fp,
"\n"
"fp bl <on/off>\n"
" - turns the CCFL backlight of the display on/off\n"
- "fp <on/off>\n" " - turns the whole display on/off\n"
+ "fp <on/off>\n" " - turns the whole display on/off"
#ifdef CONFIG_BC3450_CRT
+ "\n"
"fp crt <on/off>\n"
- " - enables/disables the crt output (debug only)\n"
+ " - enables/disables the crt output (debug only)"
#endif /* CONFIG_BC3450_CRT */
);
-
/*
* temp - DS1620 thermometer
*/
@@ -524,7 +524,7 @@ static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (temp, 3, 1, cmd_temp,
"print current temperature",
- "\n" "temp\n" " - print current temperature\n");
+ "\n" "temp\n" " - print current temperature");
#ifdef CONFIG_BC3450_CAN
/*
@@ -818,10 +818,11 @@ int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n"
#ifdef CONFIG_BC3450_CAN
- "test can\n"
- " - connect CAN1 (X8) with CAN2 (X9) for this test\n"
+ "test can\n"
+ " - connect CAN1 (X8) with CAN2 (X9) for this test\n"
#endif /* CONFIG_BC3450_CAN */
- "test unit-off\n"
- " - turns off the BC3450 unit\n"
- " WARNING: Unsaved environment variables will be lost!\n");
+ "test unit-off\n"
+ " - turns off the BC3450 unit\n"
+ " WARNING: Unsaved environment variables will be lost!"
+);
#endif
diff --git a/board/bf537-stamp/cmd_bf537led.c b/board/bf537-stamp/cmd_bf537led.c
index e77bb0c..e65c4f8 100644
--- a/board/bf537-stamp/cmd_bf537led.c
+++ b/board/bf537-stamp/cmd_bf537led.c
@@ -33,7 +33,7 @@
"led <number> <action>\n" \
" <number> - Index (0-5) of LED to change, or \"all\"\n" \
" <action> - Must be one of:\n" \
- " on off toggle\n"
+ " on off toggle"
/* Number of LEDs supported by the board */
#define NUMBER_LEDS 6
@@ -191,7 +191,7 @@ void set_led_state(int index, int state)
/* Display usage information */
void show_cmd_usage()
{
- printf("Usage:\n%s", USAGE_LONG);
+ printf("Usage:\n%s\n", USAGE_LONG);
}
/* Register information for u-boot to find this command */
diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
index f009eed..cd98ae2 100644
--- a/board/cm5200/cmd_cm5200.c
+++ b/board/cm5200/cmd_cm5200.c
@@ -443,6 +443,6 @@ U_BOOT_CMD(
"fkt rs232 number\n"
" - Test RS232 (loopback plug(s) for RS232 required)\n"
"fkt usb\n"
- " - Test USB communication\n"
+ " - Test USB communication"
);
#endif /* CONFIG_CMD_BSP */
diff --git a/board/delta/delta.c b/board/delta/delta.c
index 73e6c3e..84ff47e 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -260,7 +260,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
- NULL
+ ""
);
#endif /* DELTA_CHECK_KEYBD */
diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c
index 14520e1..9d1b6d2 100644
--- a/board/esd/ar405/ar405.c
+++ b/board/esd/ar405/ar405.c
@@ -247,9 +247,8 @@ int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
digtest, 3, 1, do_digtest,
"Test digital in-/output",
- NULL
- );
-
+ ""
+);
#define ERROR_DELTA 256
@@ -341,8 +340,8 @@ int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
anatest, 2, 1, do_anatest,
"Test analog in-/output",
- NULL
- );
+ ""
+);
int counter = 0;
@@ -408,6 +407,6 @@ int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
inctest, 3, 1, do_inctest,
"Test incremental encoder inputs",
- NULL
- );
+ ""
+);
#endif
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
index 658a267..01b1223 100644
--- a/board/esd/cms700/cms700.c
+++ b/board/esd/cms700/cms700.c
@@ -189,8 +189,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "Enable / disable / query EEPROM write access",
- NULL);
+ "Enable / disable / query EEPROM write access",
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
/* ------------------------------------------------------------------------- */
diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c
index 8593125..33aeb46 100644
--- a/board/esd/common/auto_update.c
+++ b/board/esd/common/auto_update.c
@@ -551,6 +551,6 @@ int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
autoupd, 1, 1, auto_update,
"Automatically update images",
- NULL
+ ""
);
#endif /* CONFIG_AUTO_UPDATE */
diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c
index c779f79..47e946f 100644
--- a/board/esd/common/cmd_loadpci.c
+++ b/board/esd/common/cmd_loadpci.c
@@ -124,7 +124,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
loadpci, 1, 1, do_loadpci,
"Wait for pci bootcmd and boot it",
- NULL
- );
+ ""
+);
#endif
diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c
index 066df74..5c50b4c 100644
--- a/board/esd/common/lcd.c
+++ b/board/esd/common/lcd.c
@@ -373,5 +373,5 @@ int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
esdbmp, 2, 1, do_esdbmp,
"display BMP image",
- "<imageAddr> - display image\n"
+ "<imageAddr> - display image"
);
diff --git a/board/esd/common/xilinx_jtag/micro.c b/board/esd/common/xilinx_jtag/micro.c
index 37ac0cc..414e821 100644
--- a/board/esd/common/xilinx_jtag/micro.c
+++ b/board/esd/common/xilinx_jtag/micro.c
@@ -1869,4 +1869,4 @@ U_BOOT_CMD(
cpld, 2, 1, do_cpld,
"program onboard CPLD",
"<xsvf-addr>"
- );
+);
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index aba240f..cd57ed4 100644
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -183,6 +183,6 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
eepwren, 2, 0, do_eep_wren,
"Enable / disable / query EEPROM write access",
- NULL
- );
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index ccbe245..a677c62 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -690,8 +690,8 @@ int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
onewire, 1, 1, do_onewire,
"Read 1-write ID",
- NULL
- );
+ ""
+);
#define CONFIG_SYS_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT24WC32 */
#define CONFIG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars */
@@ -751,8 +751,8 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
getbpip, 1, 1, do_get_bpip,
"Update IP-Address with Backplane IP-Address",
- NULL
- );
+ ""
+);
/*
* Set and print backplane ip...
@@ -787,7 +787,7 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
setbpip, 2, 1, do_set_bpip,
"Write Backplane IP-Address",
- NULL
- );
+ ""
+);
#endif /* CONFIG_CPCI405AB */
diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c
index b6b50fb..36fcf7f 100644
--- a/board/esd/cpci5200/cpci5200.c
+++ b/board/esd/cpci5200/cpci5200.c
@@ -295,4 +295,6 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(writepci, 3, 1, do_writepci,
"Write some data to pcibus",
- "<addr> <size>\n" " - Write some data to pcibus.\n");
+ "<addr> <size>\n"
+ ""
+);
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index 4826633..258d8b2 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -994,5 +994,5 @@ int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
show_config, 1, 1, do_show_config,
"Show Marvell strapping register",
- "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n"
- );
+ "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)"
+);
diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c
index 0310c47..675e507 100644
--- a/board/esd/dasa_sim/cmd_dasa_sim.c
+++ b/board/esd/dasa_sim/cmd_dasa_sim.c
@@ -230,7 +230,7 @@ U_BOOT_CMD(
pci9054, 3, 1, do_pci9054,
"PLX PCI9054 EEPROM access",
"pci9054 info - print EEPROM values\n"
- "pci9054 update - updates EEPROM with default values\n"
+ "pci9054 update - updates EEPROM with default values"
);
/* ------------------------------------------------------------------------- */
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index 45dfa6f..0ec519b 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -607,8 +607,8 @@ int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dcf77, 1, 1, do_dcf77,
"Check DCF77 receiver",
- NULL
- );
+ ""
+);
/*
* initialize USB hub via I2C1
@@ -657,8 +657,8 @@ int do_hubinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
hubinit, 1, 1, do_hubinit,
"Initialize USB hub",
- NULL
- );
+ ""
+);
#endif /* CONFIG_I2C_MULTI_BUS */
#define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3
@@ -790,8 +790,8 @@ int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
sbe, 2, 0, do_setup_boot_eeprom,
"setup boot eeprom",
- NULL
- );
+ ""
+);
#if defined(CONFIG_SYS_EEPROM_WREN)
/*
@@ -863,8 +863,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "Enable / disable / query EEPROM write access",
- NULL);
+ "Enable / disable / query EEPROM write access",
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
static int got_pldirq;
@@ -916,8 +917,8 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
wpi, 1, 1, do_waitpwrirq,
"Wait for power change interrupt",
- NULL
- );
+ ""
+);
/*
* initialize DVI panellink transmitter
@@ -961,8 +962,8 @@ int do_dviinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dviinit, 1, 1, do_dviinit,
"Initialize DVI Panellink transmitter",
- NULL
- );
+ ""
+);
/*
* TODO: 'time' command might be useful for others as well.
@@ -1001,8 +1002,8 @@ int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
time, CONFIG_SYS_MAXARGS, 1, do_time,
"run command and output execution time",
- NULL
- );
+ ""
+);
extern void video_hw_rectfill (
unsigned int bpp, /* bytes per pixel */
@@ -1051,5 +1052,5 @@ int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
gfxdemo, CONFIG_SYS_MAXARGS, 1, do_gfxdemo,
"demo",
- NULL
- );
+ ""
+);
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index eab952c..5ae4c75 100644
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -769,8 +769,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "Enable / disable / query EEPROM write access",
- NULL);
+ "Enable / disable / query EEPROM write access",
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/ocrtc/cmd_ocrtc.c b/board/esd/ocrtc/cmd_ocrtc.c
index db2c548..5f3254d 100644
--- a/board/esd/ocrtc/cmd_ocrtc.c
+++ b/board/esd/ocrtc/cmd_ocrtc.c
@@ -55,7 +55,7 @@ int do_setdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
setdevice, 1, 1, do_setdevice,
"Set device number on pci adapter boards",
- NULL
+ ""
);
@@ -78,7 +78,7 @@ int do_getdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
getdevice, 1, 1, do_getdevice,
"Get device number and set slot env variable",
- NULL
+ ""
);
#endif
diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c
index a0d1f3f..1d14611 100644
--- a/board/esd/pci405/cmd_pci405.c
+++ b/board/esd/pci405/cmd_pci405.c
@@ -109,6 +109,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
loadpci, 1, 1, do_loadpci,
"Wait for pci-image and boot it",
- NULL
+ ""
);
#endif
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index 8973f97..56184ca 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -381,5 +381,5 @@ U_BOOT_CMD(
"wpeeprom 1\n"
" - enable I2C EEPROM write protection\n"
"wpeeprom 0\n"
- " - disable I2C EEPROM write protection\n"
- );
+ " - disable I2C EEPROM write protection"
+);
diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c
index f225f0e..4e64e83 100644
--- a/board/esd/pf5200/pf5200.c
+++ b/board/esd/pf5200/pf5200.c
@@ -294,7 +294,7 @@ int do_poweroff(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return (0);
}
-U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", NULL);
+U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", "");
int phypower(int flag)
{
@@ -338,7 +338,7 @@ int do_phypower(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(phypower, 2, 2, do_phypower,
- "Switch power of ethernet phy", NULL);
+ "Switch power of ethernet phy", "");
int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
@@ -369,5 +369,7 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(writepci, 3, 1, do_writepci,
- "Write some data to pcibus",
- "<addr> <size>\n" " - Write some data to pcibus.\n");
+ "Write some data to pcibus",
+ "<addr> <size>\n"
+ ""
+);
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index a94604a..fdacbf6 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -333,6 +333,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "Enable / disable / query EEPROM write access",
- NULL);
+ "Enable / disable / query EEPROM write access",
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
index 0fbc3dc..1af431b 100644
--- a/board/esd/pmc440/cmd_pmc440.c
+++ b/board/esd/pmc440/cmd_pmc440.c
@@ -99,8 +99,8 @@ int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
waithci, 1, 1, do_waithci,
"Wait for host control interrupt",
- NULL
- );
+ ""
+);
void dump_fifo(pmc440_fpga_t *fpga, int f, int *n)
{
@@ -266,8 +266,8 @@ U_BOOT_CMD(
" - with 'wait' argument: interrupt driven read from all fifos\n"
" - with 'read' argument: read current contents from all fifos\n"
" - with 'write' argument: write 'data' 'cnt' times to "
- "'fifo' or 'address'\n"
- );
+ "'fifo' or 'address'"
+);
int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -338,7 +338,7 @@ U_BOOT_CMD(
sbe, 4, 0, do_setup_bootstrap_eeprom,
"setup bootstrap eeprom",
"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
- );
+);
#if defined(CONFIG_PRAM)
#include <environment.h>
@@ -400,8 +400,8 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
painit, 1, 1, do_painit,
"prepare PciAccess system",
- NULL
- );
+ ""
+);
#endif /* CONFIG_PRAM */
int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -412,8 +412,8 @@ int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
selfreset, 1, 1, do_selfreset,
"assert self-reset# signal",
- NULL
- );
+ ""
+);
int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -449,8 +449,8 @@ int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
resetout, 2, 1, do_resetout,
"assert PMC-RESETOUT# signal",
- NULL
- );
+ ""
+);
int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -481,8 +481,8 @@ int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
inta, 2, 1, do_inta,
"Assert/Deassert or query INTA# state in non-monarch mode",
- NULL
- );
+ ""
+);
/* test-only */
int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -514,8 +514,8 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
pmm, 2, 1, do_pmm,
"Setup pmm[1] registers",
- "<pciaddr> (pciaddr will be aligned to 256MB)\n"
- );
+ "<pciaddr> (pciaddr will be aligned to 256MB)"
+);
#if defined(CONFIG_SYS_EEPROM_WREN)
int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -549,8 +549,9 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return state;
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "Enable / disable / query EEPROM write access",
- NULL);
+ "Enable / disable / query EEPROM write access",
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
#endif /* CONFIG_CMD_BSP */
diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c
index 9602ee5..1844442 100644
--- a/board/esd/tasreg/tasreg.c
+++ b/board/esd/tasreg/tasreg.c
@@ -250,8 +250,8 @@ int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
iploop, 2, 1, do_iploop,
"i2c probe loop <addr>",
- NULL
- );
+ ""
+);
/*
*/
@@ -303,8 +303,8 @@ int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
codec, 1, 1, do_codec,
"Enable codec",
- NULL
- );
+ ""
+);
/*
*/
@@ -336,8 +336,8 @@ int do_saa(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
saa, 5, 1, do_saa,
"Write to SAA1064 <addr> <instr> <cntrl> <data>",
- NULL
- );
+ ""
+);
/*
*/
@@ -375,8 +375,8 @@ int do_iwrite(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
iwrite, 6, 1, do_iwrite,
"Write n bytes to I2C-device",
- "addr cnt data0 ... datan\n"
- );
+ "addr cnt data0 ... datan"
+);
/*
*/
@@ -407,8 +407,8 @@ int do_iread(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
iread, 3, 1, do_iread,
"Read from I2C <addr> <cnt>",
- NULL
- );
+ ""
+);
/*
*/
@@ -445,6 +445,6 @@ int do_ireadl(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
ireadl, 2, 1, do_ireadl,
"Read-loop from I2C <addr>",
- NULL
- );
+ ""
+);
#endif
diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c
index 96a04b3..9127550 100644
--- a/board/esd/voh405/voh405.c
+++ b/board/esd/voh405/voh405.c
@@ -392,6 +392,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "Enable / disable / query EEPROM write access",
- NULL);
+ "Enable / disable / query EEPROM write access",
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/evb64260/zuma_pbb.c b/board/evb64260/zuma_pbb.c
index aef9c27..cab4fca 100644
--- a/board/evb64260/zuma_pbb.c
+++ b/board/evb64260/zuma_pbb.c
@@ -204,19 +204,17 @@ U_BOOT_CMD(
zinit, 1, 0, do_zuma_init_pbb,
"init zuma pbb",
"\n"
- " - init zuma pbb\n"
);
U_BOOT_CMD(
zdtest, 3, 1, do_zuma_test_dma,
"run dma test",
"[cmd [count]]\n"
- " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n"
+ " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes"
);
U_BOOT_CMD(
zminit, 1, 0, do_zuma_init_mbox,
"init zuma mbox",
"\n"
- " - init zuma mbox\n"
);
#endif
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
index eb76d93..4851f06 100644
--- a/board/freescale/common/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -279,9 +279,10 @@ int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp,
}
U_BOOT_CMD(
- diswd, 1, 0, pixis_disable_watchdog_cmd,
- "Disable watchdog timer",
- NULL);
+ diswd, 1, 0, pixis_disable_watchdog_cmd,
+ "Disable watchdog timer",
+ ""
+);
#ifdef CONFIG_PIXIS_SGMII_CMD
int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -343,14 +344,15 @@ int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(
- pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii,
- "pixis_set_sgmii"
- " - Enable or disable SGMII mode for a given TSEC \n",
- "\npixis_set_sgmii [TSEC num] <on|off|switch>\n"
- " TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n"
- " on - enables SGMII\n"
- " off - disables SGMII\n"
- " switch - use switch settings\n");
+ pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii,
+ "pixis_set_sgmii"
+ " - Enable or disable SGMII mode for a given TSEC \n",
+ "\npixis_set_sgmii [TSEC num] <on|off|switch>\n"
+ " TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n"
+ " on - enables SGMII\n"
+ " off - disables SGMII\n"
+ " switch - use switch settings"
+);
#endif
/*
@@ -544,5 +546,5 @@ U_BOOT_CMD(
" pixis_reset [altbank]\n"
" pixis_reset altbank wd\n"
" pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
- " pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
- );
+ " pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>"
+);
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
index 2b2d5d7..0ad878c 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
@@ -140,8 +140,8 @@ U_BOOT_CMD(
diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp,
"Init or Display BMP file",
"init\n - initialize DIU\n"
- "addr\n - display bmp at address 'addr'\n"
- );
+ "addr\n - display bmp at address 'addr'"
+);
#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c
index b35038d..218f1be 100644
--- a/board/g2000/g2000.c
+++ b/board/g2000/g2000.c
@@ -186,7 +186,7 @@ int do_dumpebc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dumpebc, 1, 1, do_dumpebc,
"Dump all EBC registers",
- NULL
+ ""
);
@@ -208,7 +208,7 @@ int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dumpdcr, 1, 1, do_dumpdcr,
"Dump all DCR registers",
- NULL
+ ""
);
@@ -272,6 +272,6 @@ int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dumpspr, 1, 1, do_dumpspr,
"Dump all SPR registers",
- NULL
+ ""
);
#endif
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c
index 092d368..262070f 100644
--- a/board/hymod/bsp.c
+++ b/board/hymod/bsp.c
@@ -297,7 +297,7 @@ U_BOOT_CMD(
"fpga info\n"
" - print information about the Hymod FPGA, namely the\n"
" memory addresses at which the four FPGA local bus\n"
- " address spaces appear in the physical address space\n"
+ " address spaces appear in the physical address space"
);
/* ------------------------------------------------------------------------- */
int
@@ -340,7 +340,7 @@ U_BOOT_CMD(
"[type]\n"
" - write zeroes into the EEPROM on the board of type `type'\n"
" (`type' is either `main' or `mezz' - default `main')\n"
- " Note: the EEPROM write enable jumper must be installed\n"
+ " Note: the EEPROM write enable jumper must be installed"
);
/* ------------------------------------------------------------------------- */
diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c
index 12c0a85..3761ef6 100644
--- a/board/inka4x0/inkadiag.c
+++ b/board/inka4x0/inkadiag.c
@@ -439,14 +439,14 @@ static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
cmd_tbl_t cmd_inkadiag_sub[] = {
U_BOOT_CMD_MKENT(io, 1, 1, do_inkadiag_io, "read digital input",
- "<drawer1|drawer2|other> [value] - get or set specified signal\n"),
+ "<drawer1|drawer2|other> [value] - get or set specified signal"),
U_BOOT_CMD_MKENT(serial, 4, 1, do_inkadiag_serial, "test serial port",
"<num> <mode> <baudrate> <msg> - test uart num [0..11] in mode\n"
- "and baudrate with msg\n"),
+ "and baudrate with msg"),
U_BOOT_CMD_MKENT(buzzer, 2, 1, do_inkadiag_buzzer, "activate buzzer",
- "<period> <freq> - turn buzzer on for period ms with freq hz\n"),
+ "<period> <freq> - turn buzzer on for period ms with freq hz"),
U_BOOT_CMD_MKENT(help, 4, 1, do_inkadiag_help, "get help",
- "[command] - get help for command\n"),
+ "[command] - get help for command"),
};
static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag,
@@ -483,7 +483,7 @@ U_BOOT_CMD(inkadiag, 6, 1, do_inkadiag,
"inkadiag - inka diagnosis\n",
"[inkadiag what ...]\n"
" - perform a diagnosis on inka hardware\n"
- "'inkadiag' performs hardware tests.\n\n");
+ "'inkadiag' performs hardware tests.");
/* Relocate the command table function pointers when running in RAM */
int inkadiag_init_r (void) {
diff --git a/board/keymile/common/keymile_hdlc_enet.c b/board/keymile/common/keymile_hdlc_enet.c
index 5797880..2e913ad 100644
--- a/board/keymile/common/keymile_hdlc_enet.c
+++ b/board/keymile/common/keymile_hdlc_enet.c
@@ -591,7 +591,7 @@ int hdlc_enet_stest(struct cmd_tbl_s *a, int b, int c, char **d)
U_BOOT_CMD(
stest, 1, 1, hdlc_enet_stest,
"simple send test for hdlc_enet",
- "no arguments\n"
+ ""
);
/* simple receive test routine */
int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d)
@@ -613,7 +613,7 @@ int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d)
U_BOOT_CMD(
rtest, 1, 1, hdlc_enet_rtest,
"simple receive test for hdlc_enet",
- "no arguments\n"
+ ""
);
#endif
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index 1b665a9..75b3209 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -853,7 +853,7 @@ U_BOOT_CMD(
pic, 4, 1, do_pic,
"read and write PIC registers",
"read reg - read PIC register `reg'\n"
- "pic write reg val - write value `val' to PIC register `reg'\n"
+ "pic write reg val - write value `val' to PIC register `reg'"
);
/***********************************************************************
@@ -911,7 +911,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
- NULL
+ ""
);
/* Read and set LSB switch */
@@ -985,7 +985,7 @@ U_BOOT_CMD(
"check and set LSB switch",
"on - switch LSB on\n"
"lsb off - switch LSB off\n"
- "lsb - print current setting\n"
+ "lsb - print current setting"
);
#endif
diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c
index bafd39c..be1a1df 100644
--- a/board/lwmon5/kbd.c
+++ b/board/lwmon5/kbd.c
@@ -433,7 +433,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
- NULL
+ ""
);
/*----------------------------- Utilities -----------------------------*/
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index 4c04b98..9b76e76 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -487,7 +487,7 @@ int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
eepromwp, 2, 0, do_eeprom_wp,
"eeprom write protect off/on",
- "<on|off> - enable (on) or disable (off) I2C EEPROM write protect\n"
+ "<on|off> - enable (on) or disable (off) I2C EEPROM write protect"
);
#if defined(CONFIG_VIDEO)
diff --git a/board/micronas/vct/smc_eeprom.c b/board/micronas/vct/smc_eeprom.c
index 2bc7ad4..6587f13 100644
--- a/board/micronas/vct/smc_eeprom.c
+++ b/board/micronas/vct/smc_eeprom.c
@@ -384,11 +384,11 @@ static int do_eeprom_save_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]
}
U_BOOT_CMD(smcee, 1, 0, do_eeprom_erase_all,
- "smcee - Erase content of SMC EEPROM\n",);
+ "smcee - Erase content of SMC EEPROM",);
U_BOOT_CMD(smced, 1, 0, do_eeprom_dump,
- "smced - Dump content of SMC EEPROM\n",);
+ "smced - Dump content of SMC EEPROM",);
U_BOOT_CMD(smcew, 2, 0, do_eeprom_save_mac,
"smcew - Write MAC address to SMC EEPROM\n",
- "aa:bb:cc:dd:ee:ff new mac address\n");
+ "aa:bb:cc:dd:ee:ff new mac address");
diff --git a/board/mpl/mip405/cmd_mip405.c b/board/mpl/mip405/cmd_mip405.c
index dc13804..cd93a7c 100644
--- a/board/mpl/mip405/cmd_mip405.c
+++ b/board/mpl/mip405/cmd_mip405.c
@@ -60,7 +60,7 @@ U_BOOT_CMD(
"mip405 flash mps - updates U-Boot with image from MPS\n"
"mip405 info - displays board information\n"
"mip405 led <on> - switches LED on (on=1) or off (on=0)\n"
- "mip405 mem [cnt] - Memory Test <cnt>-times, <cnt> = -1 loop forever\n"
+ "mip405 mem [cnt] - Memory Test <cnt>-times, <cnt> = -1 loop forever"
);
/* ------------------------------------------------------------------------- */
diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c
index 95bfdcc..0682323 100644
--- a/board/mpl/pati/cmd_pati.c
+++ b/board/mpl/pati/cmd_pati.c
@@ -443,7 +443,7 @@ U_BOOT_CMD(
" era - erase PCI EEPROM (write all word to 0xffff)\n"
" reload- Reload PCI Bridge with EEPROM Values\n"
" NOTE: <addr> must start on word boundary\n"
- " <offset> and <size> must be even byte values\n"
+ " <offset> and <size> must be even byte values"
);
/* ------------------------------------------------------------------------- */
diff --git a/board/mpl/pip405/cmd_pip405.c b/board/mpl/pip405/cmd_pip405.c
index ad5e0a1..6bbae89 100644
--- a/board/mpl/pip405/cmd_pip405.c
+++ b/board/mpl/pip405/cmd_pip405.c
@@ -63,7 +63,7 @@ U_BOOT_CMD(
"PIP405 specific Cmds",
"flash mem [SrcAddr] - updates U-Boot with image in memory\n"
"pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n"
- "pip405 flash mps - updates U-Boot with image from MPS\n"
+ "pip405 flash mps - updates U-Boot with image from MPS"
);
/* ------------------------------------------------------------------------- */
diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c
index cbe7fe2..0160774 100644
--- a/board/mpl/vcma9/cmd_vcma9.c
+++ b/board/mpl/vcma9/cmd_vcma9.c
@@ -174,5 +174,5 @@ int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
vcma9, 6, 1, do_vcma9,
"VCMA9 specific commands",
- "flash mem [SrcAddr]\n - updates U-Boot with image in memory\n"
+ "flash mem [SrcAddr]\n - updates U-Boot with image in memory"
);
diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c
index 80c2cb5..7985f7d 100644
--- a/board/pcippc2/pcippc2.c
+++ b/board/pcippc2/pcippc2.c
@@ -239,7 +239,7 @@ U_BOOT_CMD(
"check and set watchdog",
"on - switch watchDog on\n"
"wd off - switch watchdog off\n"
- "wd - print current status\n"
+ "wd - print current status"
);
#endif
diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c
index 9cc3f5b..47d6391 100644
--- a/board/pcs440ep/pcs440ep.c
+++ b/board/pcs440ep/pcs440ep.c
@@ -763,7 +763,7 @@ U_BOOT_CMD(
" 0x02 = DIAG 2 on\n"
" 0x04 = DIAG 3 on\n"
" 0x08 = DIAG 4 on\n"
- " > 0x100 set the LED, who are on, to state blinking\n"
+ " > 0x100 set the LED, who are on, to state blinking"
);
#if defined(CONFIG_SHA1_CHECK_UB_IMG)
@@ -823,7 +823,7 @@ U_BOOT_CMD(
"calculate the SHA1 Sum",
"address len [addr] calculate the SHA1 sum [save at addr]\n"
" -p calculate the SHA1 sum from the U-Boot image in flash and print\n"
- " -c check the U-Boot image in flash\n"
+ " -c check the U-Boot image in flash"
);
#endif
diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c
index ff5d63e..a989351 100644
--- a/board/pn62/cmd_pn62.c
+++ b/board/pn62/cmd_pn62.c
@@ -54,8 +54,8 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
led , 3, 1, do_led,
"set LED 0..11 on the PN62 board",
- "i fun\n"
- " - set 'i'th LED to function 'fun'\n"
+ "i fun"
+ " - set 'i'th LED to function 'fun'"
);
/*
@@ -177,7 +177,7 @@ U_BOOT_CMD(
loadpci, 2, 1, do_loadpci,
"load binary file over PCI",
"[addr]\n"
- " - load binary file over PCI to address 'addr'\n"
+ " - load binary file over PCI to address 'addr'"
);
#endif
diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c
index 8777284..c323456 100644
--- a/board/prodrive/pdnb3/pdnb3.c
+++ b/board/prodrive/pdnb3/pdnb3.c
@@ -228,7 +228,7 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
fpga, 2, 0, do_fpga,
"boot FPGA",
- "address size\n - boot FPGA with gzipped image at <address>\n"
+ "address size\n - boot FPGA with gzipped image at <address>"
);
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c
index aa598aa..e9e479c 100644
--- a/board/pxa255_idp/pxa_idp.c
+++ b/board/pxa255_idp/pxa_idp.c
@@ -129,7 +129,7 @@ int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd,
"custom IDP command",
- "no args at this time\n"
+ "no args at this time"
);
#endif
diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c
index 1871984..703af73 100644
--- a/board/r360mpi/r360mpi.c
+++ b/board/r360mpi/r360mpi.c
@@ -415,5 +415,5 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
- NULL
+ ""
);
diff --git a/board/renesas/sh7785lcr/rtl8169_mac.c b/board/renesas/sh7785lcr/rtl8169_mac.c
index 6d0bbc0..634efb4 100644
--- a/board/renesas/sh7785lcr/rtl8169_mac.c
+++ b/board/renesas/sh7785lcr/rtl8169_mac.c
@@ -325,7 +325,7 @@ U_BOOT_CMD(
setmac, 2, 1, do_set_mac,
"write MAC address for RTL8110SCL",
"\n"
- "setmac <mac address> - write MAC address for RTL8110SCL\n"
+ "setmac <mac address> - write MAC address for RTL8110SCL"
);
int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -344,5 +344,5 @@ U_BOOT_CMD(
printmac, 1, 1, do_print_mac,
"print MAC address for RTL8110",
"\n"
- " - print MAC address for RTL8110\n"
+ " - print MAC address for RTL8110"
);
diff --git a/board/renesas/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c
index 6dbb784..e803b3c 100644
--- a/board/renesas/sh7785lcr/selfcheck.c
+++ b/board/renesas/sh7785lcr/selfcheck.c
@@ -168,5 +168,5 @@ U_BOOT_CMD(
"hwtest sm107 - output SM107 version\n"
"hwtest net - check RTL8110 ID\n"
"hwtest sata - check SiI3512 ID\n"
- "hwtest pci - output PCI slot device ID\n"
+ "hwtest pci - output PCI slot device ID"
);
diff --git a/board/renesas/sh7785lcr/sh7785lcr.c b/board/renesas/sh7785lcr/sh7785lcr.c
index 6bdf3c0..9948d04 100644
--- a/board/renesas/sh7785lcr/sh7785lcr.c
+++ b/board/renesas/sh7785lcr/sh7785lcr.c
@@ -82,6 +82,6 @@ U_BOOT_CMD(
pmb, 1, 1, do_pmb,
"pmb - PMB setting\n",
"\n"
- " - PMB setting for all SDRAM mapping\n"
+ " - PMB setting for all SDRAM mapping"
);
#endif
diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c
index c1af70c..bc88e5a 100644
--- a/board/sandburst/common/ppc440gx_i2c.c
+++ b/board/sandburst/common/ppc440gx_i2c.c
@@ -501,7 +501,7 @@ int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
iprobe1, 1, 1, do_i2c1_probe,
"probe to discover valid I2C chip addresses",
- "\n -discover valid I2C chip addresses\n"
+ ""
);
#endif /* CONFIG_I2C_BUS1 */
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c
index b8ae68f..92f5247 100644
--- a/board/sandburst/karef/karef.c
+++ b/board/sandburst/karef/karef.c
@@ -611,7 +611,7 @@ int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(kasetup, 1, 1, karefSetupVars,
- "Set environment to factory defaults", NULL);
+ "Set environment to factory defaults", "");
U_BOOT_CMD(karecover, 1, 1, karefRecover,
- "Set environment to allow for fs recovery", NULL);
+ "Set environment to allow for fs recovery", "");
diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c
index fc136c8..27d7f74 100644
--- a/board/sandburst/metrobox/metrobox.c
+++ b/board/sandburst/metrobox/metrobox.c
@@ -577,7 +577,7 @@ int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars,
- "Set environment to factory defaults", NULL);
+ "Set environment to factory defaults", "");
U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover,
- "Set environment to allow for fs recovery", NULL);
+ "Set environment to allow for fs recovery", "");
diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c
index c9a93e1..4b45902 100644
--- a/board/siemens/common/fpga.c
+++ b/board/siemens/common/fpga.c
@@ -295,7 +295,7 @@ U_BOOT_CMD(
"access FPGA(s)",
"fpga status [name] - print FPGA status\n"
"fpga reset [name] - reset FPGA\n"
- "fpga load [name] addr - load FPGA configuration data\n"
+ "fpga load [name] addr - load FPGA configuration data"
);
#endif
diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c
index f87d6bc..827578c 100644
--- a/board/siemens/pcu_e/pcu_e.c
+++ b/board/siemens/pcu_e/pcu_e.c
@@ -404,10 +404,10 @@ int do_puma (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD (puma, 4, 1, do_puma,
- "access PUMA FPGA",
- "status - print PUMA status\n"
- "puma load addr len - load PUMA configuration data\n");
-
+ "access PUMA FPGA",
+ "status - print PUMA status\n"
+ "puma load addr len - load PUMA configuration data"
+);
#endif
/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c
index 99ff507..449c1a4 100644
--- a/board/ssv/common/cmd_sled.c
+++ b/board/ssv/common/cmd_sled.c
@@ -157,6 +157,6 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (sled, 3, 0, do_sled,
"check and set status led",
- "sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n");
+ "sled [name [state]]\n" __NAME_STR " - state: on|off|blink");
#endif
#endif /* CONFIG_STATUS_LED */
diff --git a/board/ssv/common/wd_pio.c b/board/ssv/common/wd_pio.c
index 9b38425..eaf1d25 100644
--- a/board/ssv/common/wd_pio.c
+++ b/board/ssv/common/wd_pio.c
@@ -154,7 +154,7 @@ U_BOOT_CMD(
"check and set watchdog",
"on - switch watchDog on\n"
"wd off - switch watchdog off\n"
- "wd - print current status\n"
+ "wd - print current status"
);
#endif
#endif /* CONFIG_HW_WATCHDOG */
diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c
index 20632a7..e309beb 100644
--- a/board/tqc/tqm5200/cmd_stk52xx.c
+++ b/board/tqc/tqm5200/cmd_stk52xx.c
@@ -1201,21 +1201,21 @@ U_BOOT_CMD(
"sound square [duration] [freq] [channel]\n"
" - generate squarewave for 'duration' ms with frequency 'freq'\n"
" on left \"l\" or right \"r\" channel\n"
- "pcm1772 reg val\n"
+ "pcm1772 reg val"
);
U_BOOT_CMD(
wav , 3, 1, cmd_wav,
"play wav file",
"[addr] [bytes]\n"
- " - play wav file at address 'addr' with length 'bytes'\n"
+ " - play wav file at address 'addr' with length 'bytes'"
);
U_BOOT_CMD(
beep , 2, 1, cmd_beep,
"play short beep",
"[channel]\n"
- " - play short beep on \"l\"eft or \"r\"ight channel\n"
+ " - play short beep on \"l\"eft or \"r\"ight channel"
);
#endif /* CONFIG_STK52XX || CONFIG_FO300 */
@@ -1228,10 +1228,11 @@ U_BOOT_CMD(
"fkt can\n"
" - loopback plug for X83 required\n"
"fkt rs232 number\n"
- " - loopback plug(s) for X2 required\n"
+ " - loopback plug(s) for X2 required"
#ifndef CONFIG_TQM5200S
+ "\n"
"fkt backlight on/off\n"
- " - switch backlight on or off\n"
+ " - switch backlight on or off"
#endif /* !CONFIG_TQM5200S */
);
#elif defined(CONFIG_FO300)
@@ -1241,7 +1242,7 @@ U_BOOT_CMD(
"fkt can\n"
" - loopback plug for X16/X29 required\n"
"fkt rs232 number\n"
- " - loopback plug(s) for X21/X22 required\n"
+ " - loopback plug(s) for X21/X22 required"
);
#endif
#endif
diff --git a/board/tqc/tqm5200/cmd_tb5200.c b/board/tqc/tqm5200/cmd_tb5200.c
index b9c9e7e..578e716 100644
--- a/board/tqc/tqm5200/cmd_tb5200.c
+++ b/board/tqc/tqm5200/cmd_tb5200.c
@@ -91,13 +91,13 @@ int cmd_backlight(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
led , 2, 1, cmd_led,
"switch status LED on or off",
- "on/off\n"
+ "on/off"
);
U_BOOT_CMD(
backlight , 2, 1, cmd_backlight,
"switch backlight on or off",
- "on/off\n"
+ "on/off"
);
#endif /* CONFIG_STK52XX */
diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c
index 5bc080f..92f74a3 100644
--- a/board/tqc/tqm8272/tqm8272.c
+++ b/board/tqc/tqm8272/tqm8272.c
@@ -867,7 +867,7 @@ int do_hwib_dump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
hwib, 1, 1, do_hwib_dump,
"dump HWIB'",
- "\n"
+ ""
);
#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index 7e2a672..d0465fb 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -262,7 +262,7 @@ U_BOOT_CMD(
"\n"
" - start burn-in test application\n"
" The burn-in test could took a while to finish!\n"
- " The content of the onboard EEPROM is modified!\n"
+ " The content of the onboard EEPROM is modified!"
);
@@ -295,7 +295,7 @@ U_BOOT_CMD(
"read dip switch on TRAB",
"\n"
" - read state of dip switch (S1) on TRAB board\n"
- " read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n"
+ " read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\""
);
@@ -323,7 +323,7 @@ U_BOOT_CMD(
vcc5v, 1, 1, do_vcc5v,
"read VCC5V on TRAB",
"\n"
- " - read actual value of voltage VCC5V\n"
+ " - read actual value of voltage VCC5V"
);
@@ -347,7 +347,7 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
c_temp, 1, 1, do_contact_temp,
"read contact temperature on TRAB",
- "\n"
+ ""
" - reads the onboard temperature (=contact temperature)\n"
);
@@ -401,7 +401,7 @@ U_BOOT_CMD(
"print burn in status on TRAB",
"\n"
" - prints the status variables of the last burn in test\n"
- " stored in the onboard EEPROM on TRAB board\n"
+ " stored in the onboard EEPROM on TRAB board"
);
static int read_dip (void)
@@ -890,7 +890,7 @@ U_BOOT_CMD(
"delay\n"
" - contact temperature [1/100 C] is printed endlessly to console\n"
" <delay> specifies the seconds to wait between two measurements\n"
- " For each measurment a timestamp is printeted\n"
+ " For each measurment a timestamp is printeted"
);
#endif
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 5359065..ddf6abf 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -323,7 +323,7 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
- NULL
+ ""
);
#ifdef CONFIG_MODEM_SUPPORT
diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c
index 9fa7aef..b6b16bf 100644
--- a/board/trizepsiv/eeprom.c
+++ b/board/trizepsiv/eeprom.c
@@ -81,4 +81,5 @@ U_BOOT_CMD(
"\tdm9000ee read \n"
"\tword:\t\t00-02 : MAC Address\n"
"\t\t\t03-07 : DM9000 Configuration\n"
- "\t\t\t08-63 : User data\n");
+ "\t\t\t08-63 : User data"
+);
diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c
index eaec940..013fc79 100644
--- a/board/w7o/cmd_vpd.c
+++ b/board/w7o/cmd_vpd.c
@@ -60,7 +60,7 @@ U_BOOT_CMD(
vpd, 2, 1, do_vpd,
"Read Vital Product Data",
"[dev_addr]\n"
- " - Read VPD Data from default address, or device address 'dev_addr'.\n"
+ " - Read VPD Data from default address, or device address 'dev_addr'."
);
#endif
diff --git a/board/zeus/update.c b/board/zeus/update.c
index ce1f34f..c8487e5 100644
--- a/board/zeus/update.c
+++ b/board/zeus/update.c
@@ -99,7 +99,7 @@ int do_update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
U_BOOT_CMD (
update_boot_eeprom, 1, 1, do_update_boot_eeprom,
"update boot eeprom content",
- NULL
+ ""
);
#endif
diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c
index 3f329c2..9bc390f 100644
--- a/board/zeus/zeus.c
+++ b/board/zeus/zeus.c
@@ -328,7 +328,7 @@ int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
setdef, 4, 1, do_set_default,
"write board-specific values to EEPROM (ethaddr...)",
- "ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n"
+ "ethaddr eth1addr serial#\n - write board-specific values to EEPROM"
);
static inline int sw_reset_pressed(void)
@@ -419,7 +419,7 @@ int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
U_BOOT_CMD (
chkreset, 1, 1, do_chkreset,
"Check for status of SW-reset button and act accordingly",
- NULL
+ ""
);
#if defined(CONFIG_POST)