summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorPeng Fan <Peng.Fan@freescale.com>2015-04-28 10:35:01 +0800
committerPeng Fan <Peng.Fan@freescale.com>2015-04-29 14:56:07 +0800
commit080be535aae3fd94a53863cb0a855acca6760445 (patch)
treeedbd600d8c24cc5e801635ae53b2b48c5fc6d63c /board
parent01f62726fbb93b226691823ffb88cd4294bc9b89 (diff)
downloadu-boot-imx-080be535aae3fd94a53863cb0a855acca6760445.zip
u-boot-imx-080be535aae3fd94a53863cb0a855acca6760445.tar.gz
u-boot-imx-080be535aae3fd94a53863cb0a855acca6760445.tar.bz2
MLK-10774-19 imx:mx6qsabreauto update bsp
Update bsp and add configuration file Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Diffstat (limited to 'board')
-rw-r--r--board/freescale/mx6qsabreauto/mx6dl.cfg28
-rw-r--r--board/freescale/mx6qsabreauto/mx6qsabreauto.c410
-rw-r--r--board/freescale/mx6qsabreauto/mx6solo.cfg125
3 files changed, 461 insertions, 102 deletions
diff --git a/board/freescale/mx6qsabreauto/mx6dl.cfg b/board/freescale/mx6qsabreauto/mx6dl.cfg
index 89078e5..f7f4062 100644
--- a/board/freescale/mx6qsabreauto/mx6dl.cfg
+++ b/board/freescale/mx6qsabreauto/mx6dl.cfg
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2013-2015 Freescale Semiconductor, Inc.
* Jason Liu <r64343@freescale.com>
*
* SPDX-License-Identifier: GPL-2.0+
@@ -11,13 +11,34 @@
*/
/* image version */
+#define __ASSEMBLY__
+#include <config.h>
+
IMAGE_VERSION 2
/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
+ * Boot Device : one of spi, sd, eimnor, nand, sata:
+ * spinor: flash_offset: 0x0400
+ * nand: flash_offset: 0x0400
+ * sata: flash_offset: 0x0400
+ * sd/mmc: flash_offset: 0x0400
+ * eimnor: flash_offset: 0x1000
*/
+
+#if defined(CONFIG_SYS_BOOT_EIMNOR)
+BOOT_FROM nor
+#else /* others has the same flash_offset as sd */
BOOT_FROM sd
+#endif
+
+#ifdef CONFIG_USE_PLUGIN
+/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/
+PLUGIN board/freescale/mx6qsabreauto/plugin.bin 0x00907000
+#else
+
+#ifdef CONFIG_SECURE_BOOT
+CSF 0x2000
+#endif
/*
* Device Configuration Data (DCD)
@@ -128,3 +149,4 @@ DATA 4 0x020e0010 0xF00000CF
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4 0x020e0018 0x007F007F
DATA 4 0x020e001c 0x007F007F
+#endif
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index b76e4eb..27f3087 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012-2015 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
@@ -27,13 +27,28 @@
#include <asm/arch/mxc_hdmi.h>
#include <asm/imx-common/video.h>
#include <asm/arch/crm_regs.h>
-#include <pca953x.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
#include "../common/pfuze.h"
+#ifdef CONFIG_CMD_SATA
+#include <asm/imx-common/sata.h>
+#endif
+#ifdef CONFIG_FASTBOOT
+#include <fastboot.h>
+#ifdef CONFIG_ANDROID_RECOVERY
+#include <recovery.h>
+#endif
+#endif /*CONFIG_FASTBOOT*/
+
+#ifdef CONFIG_MAX7310_IOEXP
+#include <gpio_exp.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
+#define I2C_EXP_RST IMX_GPIO_NR(1, 15)
+#define I2C3_STEER IMX_GPIO_NR(5, 4)
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
@@ -42,6 +57,11 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+/*Need more drive strength for SD1 slot on base board*/
+#define USDHC1_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
@@ -56,6 +76,10 @@ DECLARE_GLOBAL_DATA_PTR;
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+#define SPI_PAD_CTRL (PAD_CTL_HYS | \
+ PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
#define WEIM_NOR_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
@@ -90,6 +114,7 @@ static iomux_v3_cfg_t const enet_pads[] = {
MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
};
/* I2C2 PMIC, iPod, Tuner, Codec, Touch, HDMI EDID, MIPI CSI2 card */
@@ -106,25 +131,6 @@ static struct i2c_pads_info i2c_pad_info1 = {
}
};
-#ifndef CONFIG_SYS_FLASH_CFI
-/*
- * I2C3 MLB, Port Expanders (A, B, C), Video ADC, Light Sensor,
- * Compass Sensor, Accelerometer, Res Touch
- */
-static struct i2c_pads_info i2c_pad_info2 = {
- .scl = {
- .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
- .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC,
- .gp = IMX_GPIO_NR(1, 3)
- },
- .sda = {
- .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
- .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
- .gp = IMX_GPIO_NR(3, 18)
- }
-};
-#endif
-
static iomux_v3_cfg_t const i2c3_pads[] = {
MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
@@ -133,44 +139,7 @@ static iomux_v3_cfg_t const port_exp[] = {
MX6_PAD_SD2_DAT0__GPIO1_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
-/*Define for building port exp gpio, pin starts from 0*/
-#define PORTEXP_IO_NR(chip, pin) \
- ((chip << 5) + pin)
-
-/*Get the chip addr from a ioexp gpio*/
-#define PORTEXP_IO_TO_CHIP(gpio_nr) \
- (gpio_nr >> 5)
-
-/*Get the pin number from a ioexp gpio*/
-#define PORTEXP_IO_TO_PIN(gpio_nr) \
- (gpio_nr & 0x1f)
-
-static int port_exp_direction_output(unsigned gpio, int value)
-{
- int ret;
-
- i2c_set_bus_num(2);
- ret = i2c_probe(PORTEXP_IO_TO_CHIP(gpio));
- if (ret)
- return ret;
-
- ret = pca953x_set_dir(PORTEXP_IO_TO_CHIP(gpio),
- (1 << PORTEXP_IO_TO_PIN(gpio)),
- (PCA953X_DIR_OUT << PORTEXP_IO_TO_PIN(gpio)));
-
- if (ret)
- return ret;
-
- ret = pca953x_set_val(PORTEXP_IO_TO_CHIP(gpio),
- (1 << PORTEXP_IO_TO_PIN(gpio)),
- (value << PORTEXP_IO_TO_PIN(gpio)));
-
- if (ret)
- return ret;
-
- return 0;
-}
-
+#ifdef CONFIG_SYS_USE_EIMNOR
static iomux_v3_cfg_t const eimnor_pads[] = {
MX6_PAD_EIM_D16__EIM_DATA16 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
MX6_PAD_EIM_D17__EIM_DATA17 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
@@ -239,12 +208,26 @@ static void setup_iomux_eimnor(void)
eimnor_cs_setup();
}
+#endif
static void setup_iomux_enet(void)
{
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
}
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+ /*To avoid pin conflict with NAND, set usdhc1 to 4 pins*/
+ MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC1_PAD_CTRL),
+ MX6_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC1_PAD_CTRL),
+ MX6_PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC1_PAD_CTRL),
+ MX6_PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC1_PAD_CTRL),
+ MX6_PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC1_PAD_CTRL),
+ MX6_PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC1_PAD_CTRL),
+
+ /*CD pin*/
+ MX6_PAD_GPIO_1__GPIO1_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
static iomux_v3_cfg_t const usdhc3_pads[] = {
MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -266,22 +249,133 @@ static void setup_iomux_uart(void)
}
#ifdef CONFIG_FSL_ESDHC
-static struct fsl_esdhc_cfg usdhc_cfg[1] = {
+
+#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 1)
+#define USDHC3_CD_GPIO IMX_GPIO_NR(6, 15)
+
+static struct fsl_esdhc_cfg usdhc_cfg[2] = {
+ {USDHC1_BASE_ADDR, 0, 4},
{USDHC3_BASE_ADDR},
};
+int mmc_get_env_devno(void)
+{
+ u32 soc_sbmr = readl(SRC_BASE_ADDR + 0x4);
+ u32 dev_no;
+ u32 bootsel;
+
+ bootsel = (soc_sbmr & 0x000000FF) >> 6 ;
+
+ /* If not boot from sd/mmc, use default value */
+ if (bootsel != 1)
+ return CONFIG_SYS_MMC_ENV_DEV;
+
+ /* BOOT_CFG2[3] and BOOT_CFG2[4] */
+ dev_no = (soc_sbmr & 0x00001800) >> 11;
+
+ /* need ubstract 1 to map to the mmc3 device id
+ * see the comments in board_mmc_init function
+ */
+ if (2 == dev_no)
+ dev_no--;
+
+ return dev_no;
+}
+
+int mmc_map_to_kernel_blk(int dev_no)
+{
+ if (1 == dev_no)
+ dev_no = 2;
+
+ return dev_no;
+}
+
int board_mmc_getcd(struct mmc *mmc)
{
- gpio_direction_input(IMX_GPIO_NR(6, 15));
- return !gpio_get_value(IMX_GPIO_NR(6, 15));
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC1_BASE_ADDR:
+ gpio_direction_input(USDHC1_CD_GPIO);
+ ret = !gpio_get_value(USDHC1_CD_GPIO);
+ break;
+ case USDHC3_BASE_ADDR:
+ gpio_direction_input(USDHC3_CD_GPIO);
+ ret = !gpio_get_value(USDHC3_CD_GPIO);
+ break;
+ }
+
+ return ret;
}
int board_mmc_init(bd_t *bis)
{
- imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ int i;
+
+ /*
+ * According to the board_mmc_init() the following map is done:
+ * (U-boot device node) (Physical Port)
+ * mmc0 USDHC1
+ * mmc1 USDHC3
+ */
+ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+ switch (i) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+ gpio_direction_input(USDHC1_CD_GPIO);
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ gpio_direction_input(USDHC3_CD_GPIO);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ break;
+ default:
+ printf("Warning: you configured more USDHC controllers"
+ "(%d) than supported by the board\n", i + 1);
+ return 0;
+ }
+
+ if (fsl_esdhc_initialize(bis, &usdhc_cfg[i]))
+ printf("Warning: failed to initialize mmc dev %d\n", i);
+ }
+
+ return 0;
+}
+
+int check_mmc_autodetect(void)
+{
+ char *autodetect_str = getenv("mmcautodetect");
+
+ if ((autodetect_str != NULL) &&
+ (strcmp(autodetect_str, "yes") == 0)) {
+ return 1;
+ }
+
+ return 0;
+}
+
+void board_late_mmc_env_init(void)
+{
+ char cmd[32];
+ char mmcblk[32];
+ u32 dev_no = mmc_get_env_devno();
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+ if (!check_mmc_autodetect())
+ return;
+
+ setenv_ulong("mmcdev", dev_no);
+
+ /* Set mmcblk env */
+ sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw",
+ mmc_map_to_kernel_blk(dev_no));
+ setenv("mmcroot", mmcblk);
+
+ sprintf(cmd, "mmc dev %d", dev_no);
+ run_command(cmd, 0);
}
#endif
@@ -354,9 +448,22 @@ int board_phy_config(struct phy_device *phydev)
return 0;
}
+static int setup_fec(void)
+{
+ int ret;
+
+ imx_iomux_set_gpr_register(1, 21, 1, 1);
+ ret = enable_fec_anatop_clock(0, ENET_125MHZ);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
int board_eth_init(bd_t *bis)
{
setup_iomux_enet();
+ setup_fec();
return cpu_eth_init(bis);
}
@@ -451,15 +558,87 @@ int overwrite_console(void)
return 1;
}
+#ifdef CONFIG_MAX7310_IOEXP
+/*
+ * I2C3 MLB, Port Expanders (A, B, C), Video ADC, Light Sensor,
+ * Compass Sensor, Accelerometer, Res Touch
+ */
+static struct i2c_pads_info i2c_pad_info2 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
+ .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC,
+ .gp = IMX_GPIO_NR(1, 3)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
+ .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
+ .gp = IMX_GPIO_NR(3, 18)
+ }
+};
+
+void reset_max7310(void)
+{
+ gpio_direction_output(I2C_EXP_RST, 1);
+ imx_iomux_v3_setup_multiple_pads(port_exp,
+ ARRAY_SIZE(port_exp));
+}
+
+int setup_max7310(void)
+{
+#ifdef CONFIG_SYS_I2C_MXC
+ /*
+ * set steering config to i2c,
+ * note: this causes pin conflicts with eimnor and spinor
+ */
+ gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
+ imx_iomux_v3_setup_multiple_pads(i2c3_pads,
+ ARRAY_SIZE(i2c3_pads));
+
+ /*setup i2c info 2*/
+ setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+
+ gpio_exp_setup_port(1, 2, 0x30);
+ gpio_exp_setup_port(2, 2, 0x32);
+ gpio_exp_setup_port(3, 2, 0x34);
+
+ return 0;
+#else
+ return -EPERM;
+#endif
+}
+#endif
+
+#ifdef CONFIG_MXC_SPI
+iomux_v3_cfg_t const ecspi1_pads[] = {
+ MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* Steer logic */
+ MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+void setup_spinor(void)
+{
+ imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
+ ARRAY_SIZE(ecspi1_pads));
+ gpio_direction_output(IMX_GPIO_NR(5, 4), 0);
+ gpio_direction_output(IMX_GPIO_NR(3, 19), 0);
+}
+
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return (bus == 0 && cs == 1) ? (IMX_GPIO_NR(3, 19)) : -1;
+}
+#endif
+
int board_early_init_f(void)
{
setup_iomux_uart();
-#ifdef CONFIG_VIDEO_IPUV3
- setup_display();
-#endif
-#ifdef CONFIG_NAND_MXS
- setup_gpmi_nand();
+#ifdef CONFIG_MAX7310_IOEXP
+ /*Reset gpio expander at early stage*/
+ reset_max7310();
#endif
return 0;
@@ -470,43 +649,72 @@ int board_init(void)
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- /* I2C 2 and 3 setup - I2C 3 hw mux with EIM */
+#ifdef CONFIG_MAX7310_IOEXP
+ setup_max7310();
+#endif
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
- /* I2C 3 Steer */
- gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
- imx_iomux_v3_setup_multiple_pads(i2c3_pads, ARRAY_SIZE(i2c3_pads));
-#ifndef CONFIG_SYS_FLASH_CFI
- setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+
+#ifdef CONFIG_VIDEO_IPUV3
+ setup_display();
+#endif
+
+#ifdef CONFIG_MXC_SPI
+ setup_spinor();
+#endif
+
+#ifdef CONFIG_NAND_MXS
+ setup_gpmi_nand();
#endif
- gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
- imx_iomux_v3_setup_multiple_pads(port_exp, ARRAY_SIZE(port_exp));
+#ifdef CONFIG_CMD_SATA
+ setup_sata();
+#endif
+
+#ifdef CONFIG_SYS_USE_EIMNOR
setup_iomux_eimnor();
+#endif
return 0;
}
-#ifdef CONFIG_MXC_SPI
-int board_spi_cs_gpio(unsigned bus, unsigned cs)
+static struct pmic *pfuze;
+int power_init_board(void)
{
- return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1;
+ pfuze = pfuze_common_init(I2C_PMIC);
+ if (!pfuze)
+ return -ENODEV;
+
+ return pfuze_mode_init(pfuze, APS_PFM);
}
-#endif
-int power_init_board(void)
+#ifdef CONFIG_LDO_BYPASS_CHECK
+void ldo_mode_set(int ldo_bypass)
{
- struct pmic *p;
- unsigned int ret;
-
- p = pfuze_common_init(I2C_PMIC);
- if (!p)
- return -ENODEV;
+ unsigned int value;
+ struct pmic *p = pfuze;
- ret = pfuze_mode_init(p, APS_PFM);
- if (ret < 0)
- return ret;
+ if (!p) {
+ printf("No PMIC found!\n");
+ return;
+ }
- return 0;
+ /* increase VDDARM/VDDSOC to support 1.2G chip */
+ if (check_1_2G()) {
+ ldo_bypass = 0; /* ldo_enable on 1.2G chip */
+ printf("1.2G chip, increase VDDARM_IN/VDDSOC_IN\n");
+ /* increase VDDARM to 1.425V */
+ pmic_reg_read(p, PFUZE100_SW1ABVOL, &value);
+ value &= ~0x3f;
+ value |= 0x2d;
+ pmic_reg_write(p, PFUZE100_SW1ABVOL, value);
+
+ /* increase VDDSOC to 1.425V */
+ pmic_reg_read(p, PFUZE100_SW1CVOL, &value);
+ value &= ~0x3f;
+ value |= 0x2d;
+ pmic_reg_write(p, PFUZE100_SW1CVOL, value);
+ }
}
+#endif
#ifdef CONFIG_CMD_BMODE
static const struct boot_mode board_boot_modes[] = {
@@ -522,6 +730,10 @@ int board_late_init(void)
add_board_boot_modes(board_boot_modes);
#endif
+#ifdef CONFIG_ENV_IS_IN_MMC
+ board_late_mmc_env_init();
+#endif
+
return 0;
}
@@ -546,8 +758,8 @@ int checkboard(void)
}
#ifdef CONFIG_USB_EHCI_MX6
-#define USB_HOST1_PWR PORTEXP_IO_NR(0x32, 7)
-#define USB_OTG_PWR PORTEXP_IO_NR(0x34, 1)
+#define USB_HOST1_PWR IOEXP_GPIO_NR(2, 7)
+#define USB_OTG_PWR IOEXP_GPIO_NR(3, 1)
iomux_v3_cfg_t const usb_otg_pads[] = {
MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
@@ -580,15 +792,15 @@ int board_ehci_power(int port, int on)
switch (port) {
case 0:
if (on)
- port_exp_direction_output(USB_OTG_PWR, 1);
+ gpio_exp_direction_output(USB_OTG_PWR, 1);
else
- port_exp_direction_output(USB_OTG_PWR, 0);
+ gpio_exp_direction_output(USB_OTG_PWR, 0);
break;
case 1:
if (on)
- port_exp_direction_output(USB_HOST1_PWR, 1);
+ gpio_exp_direction_output(USB_HOST1_PWR, 1);
else
- port_exp_direction_output(USB_HOST1_PWR, 0);
+ gpio_exp_direction_output(USB_HOST1_PWR, 0);
break;
default:
printf("MXC USB port %d not yet supported\n", port);
diff --git a/board/freescale/mx6qsabreauto/mx6solo.cfg b/board/freescale/mx6qsabreauto/mx6solo.cfg
new file mode 100644
index 0000000..011042b
--- /dev/null
+++ b/board/freescale/mx6qsabreauto/mx6solo.cfg
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of spi, sd, eimnor, nand, sata:
+ * spinor: flash_offset: 0x0400
+ * nand: flash_offset: 0x0400
+ * sata: flash_offset: 0x0400
+ * sd/mmc: flash_offset: 0x0400
+ * eimnor: flash_offset: 0x1000
+ */
+
+#if defined(CONFIG_SYS_BOOT_EIMNOR)
+BOOT_FROM nor
+#else /* others has the same flash_offset as sd */
+BOOT_FROM sd
+#endif
+
+#ifdef CONFIG_USE_PLUGIN
+/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/
+PLUGIN board/freescale/mx6qsabreauto/plugin.bin 0x00907000
+#else
+
+#ifdef CONFIG_SECURE_BOOT
+CSF 0x2000
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+DATA 4, 0x020e0774, 0x000C0000
+DATA 4, 0x020e0754, 0x00000000
+DATA 4, 0x020e04ac, 0x00000030
+DATA 4, 0x020e04b0, 0x00000030
+DATA 4, 0x020e0464, 0x00000030
+DATA 4, 0x020e0490, 0x00000030
+DATA 4, 0x020e074c, 0x00000030
+DATA 4, 0x020e0494, 0x00000030
+DATA 4, 0x020e04a0, 0x00000000
+DATA 4, 0x020e04b4, 0x00000030
+DATA 4, 0x020e04b8, 0x00000030
+DATA 4, 0x020e076c, 0x00000030
+DATA 4, 0x020e0750, 0x00020000
+DATA 4, 0x020e04bc, 0x00000028
+DATA 4, 0x020e04c0, 0x00000028
+DATA 4, 0x020e04c4, 0x00000028
+DATA 4, 0x020e04c8, 0x00000028
+DATA 4, 0x020e0760, 0x00020000
+DATA 4, 0x020e0764, 0x00000028
+DATA 4, 0x020e0770, 0x00000028
+DATA 4, 0x020e0778, 0x00000028
+DATA 4, 0x020e077c, 0x00000028
+DATA 4, 0x020e0470, 0x00000028
+DATA 4, 0x020e0474, 0x00000028
+DATA 4, 0x020e0478, 0x00000028
+DATA 4, 0x020e047c, 0x00000028
+DATA 4, 0x021b0800, 0xa1390003
+DATA 4, 0x021b080c, 0x001F001F
+DATA 4, 0x021b0810, 0x001F001F
+DATA 4, 0x021b083c, 0x421C0216
+DATA 4, 0x021b0840, 0x017B017A
+DATA 4, 0x021b0848, 0x4B4A4E4C
+DATA 4, 0x021b0850, 0x3F3F3334
+DATA 4, 0x021b081c, 0x33333333
+DATA 4, 0x021b0820, 0x33333333
+DATA 4, 0x021b0824, 0x33333333
+DATA 4, 0x021b0828, 0x33333333
+DATA 4, 0x021b08b8, 0x00000800
+DATA 4, 0x021b0004, 0x00020025
+DATA 4, 0x021b0008, 0x00333030
+DATA 4, 0x021b000c, 0x676B5313
+DATA 4, 0x021b0010, 0xB66E8B63
+DATA 4, 0x021b0014, 0x01FF00DB
+DATA 4, 0x021b0018, 0x00001740
+DATA 4, 0x021b001c, 0x00008000
+DATA 4, 0x021b002c, 0x000026d2
+DATA 4, 0x021b0030, 0x006B1023
+DATA 4, 0x021b0040, 0x00000027
+DATA 4, 0x021b0000, 0x84190000
+DATA 4, 0x021b001c, 0x04008032
+DATA 4, 0x021b001c, 0x00008033
+DATA 4, 0x021b001c, 0x00048031
+DATA 4, 0x021b001c, 0x05208030
+DATA 4, 0x021b001c, 0x04008040
+DATA 4, 0x021b0020, 0x00005800
+DATA 4, 0x021b0818, 0x00011117
+DATA 4, 0x021b0004, 0x00025565
+DATA 4, 0x021b0404, 0x00011006
+DATA 4, 0x021b001c, 0x00000000
+
+/* set the default clock gate to save power */
+DATA 4, 0x020c4068, 0x00C03F3F
+DATA 4, 0x020c406c, 0x0030FC03
+DATA 4, 0x020c4070, 0x0FFFC000
+DATA 4, 0x020c4074, 0x3FF00000
+DATA 4, 0x020c4078, 0xFFFFF300
+DATA 4, 0x020c407c, 0x0F0000C3
+DATA 4, 0x020c4080, 0x00000FFF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4, 0x020e0010, 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4, 0x020e0018, 0x007F007F
+DATA 4, 0x020e001c, 0x007F007F
+#endif