MLK-12436-10: mx6sabresd: update board code and header file

Align board code and header file with imx_v2016.03.
Update pmic settings for i.MX6QP.
wrap spi code together using CONFIG_MXC_SPI macro.
To i.MX6SOLO, need to define nosmp in bootargs.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit bb35d09d140efc7ff9b74bbcd77d7827c1dd503e)
Signed-off-by: Ye Li <ye.li@nxp.com>

1 files changed, 138 insertions, 22 deletions

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 9097426..d0db0c6 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -34,6 +34,9 @@
 #include <lcd.h>
 #include <mxc_epdc_fb.h>
 #endif
+#ifdef CONFIG_CMD_SATA
+#include <asm/imx-common/sata.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -150,6 +153,7 @@ static iomux_v3_cfg_t const usdhc4_pads[] = {
 	MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 };
 
+#ifdef CONFIG_MXC_SPI
 static iomux_v3_cfg_t const ecspi1_pads[] = {
 	MX6_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
 	MX6_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
@@ -157,6 +161,18 @@ static iomux_v3_cfg_t const ecspi1_pads[] = {
 	MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
+static void setup_spi(void)
+{
+	imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
+	gpio_request(IMX_GPIO_NR(4, 9), "ECSPI1 CS");
+}
+
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+	return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1;
+}
+#endif
+
 static iomux_v3_cfg_t const rgb_pads[] = {
 	MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL),
 	MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL),
@@ -226,12 +242,7 @@ static struct i2c_pads_info i2c_pad_info1 = {
 };
 #endif
 
-static void setup_spi(void)
-{
-	imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
-	gpio_request(IMX_GPIO_NR(4, 9), "ECSPI1 CS");
-}
-
+#ifdef CONFIG_PCIE_IMX
 iomux_v3_cfg_t const pcie_pads[] = {
 	MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),	/* POWER */
 	MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),	/* RESET */
@@ -243,6 +254,7 @@ static void setup_pcie(void)
 	gpio_request(CONFIG_PCIE_IMX_POWER_GPIO, "PCIE Power Enable");
 	gpio_request(CONFIG_PCIE_IMX_PERST_GPIO, "PCIE Reset");
 }
+#endif
 
 iomux_v3_cfg_t const di0_pads[] = {
 	MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,	/* DISP0_CLK */
@@ -889,35 +901,93 @@ int board_init(void)
 	setup_epdc();
 #endif
 
+#ifdef CONFIG_CMD_SATA
+	setup_sata();
+#endif
+
 	return 0;
 }
 
 #ifdef CONFIG_POWER
 int power_init_board(void)
 {
-	struct pmic *p;
+	struct pmic *pfuze;
 	unsigned int reg;
 	int ret;
 
-	p = pfuze_common_init(I2C_PMIC);
-	if (!p)
+	pfuze = pfuze_common_init(I2C_PMIC);
+	if (!pfuze)
 		return -ENODEV;
 
-	ret = pfuze_mode_init(p, APS_PFM);
+	if (is_mx6dqp())
+		ret = pfuze_mode_init(pfuze, APS_APS);
+	else
+		ret = pfuze_mode_init(pfuze, APS_PFM);
+
 	if (ret < 0)
 		return ret;
 
 	/* Increase VGEN3 from 2.5 to 2.8V */
-	pmic_reg_read(p, PFUZE100_VGEN3VOL, &reg);
+	pmic_reg_read(pfuze, PFUZE100_VGEN3VOL, &reg);
 	reg &= ~LDO_VOL_MASK;
 	reg |= LDOB_2_80V;
-	pmic_reg_write(p, PFUZE100_VGEN3VOL, reg);
+	pmic_reg_write(pfuze, PFUZE100_VGEN3VOL, reg);
 
 	/* Increase VGEN5 from 2.8 to 3V */
-	pmic_reg_read(p, PFUZE100_VGEN5VOL, &reg);
+	pmic_reg_read(pfuze, PFUZE100_VGEN5VOL, &reg);
 	reg &= ~LDO_VOL_MASK;
 	reg |= LDOB_3_00V;
-	pmic_reg_write(p, PFUZE100_VGEN5VOL, reg);
+	pmic_reg_write(pfuze, PFUZE100_VGEN5VOL, reg);
+
+	if (is_mx6dqp()) {
+		/* set SW1C staby volatage 1.075V*/
+		pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
+		reg &= ~0x3f;
+		reg |= 0x1f;
+		pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
+
+		/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+		pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+		reg &= ~0xc0;
+		reg |= 0x40;
+		pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
+		/* set SW2/VDDARM staby volatage 0.975V*/
+		pmic_reg_read(pfuze, PFUZE100_SW2STBY, &reg);
+		reg &= ~0x3f;
+		reg |= 0x17;
+		pmic_reg_write(pfuze, PFUZE100_SW2STBY, reg);
+
+		/* set SW2/VDDARM step ramp up time to from 16us to 4us/25mV */
+		pmic_reg_read(pfuze, PFUZE100_SW2CONF, &reg);
+		reg &= ~0xc0;
+		reg |= 0x40;
+		pmic_reg_write(pfuze, PFUZE100_SW2CONF, reg);
+	} else {
+		/* set SW1AB staby volatage 0.975V*/
+		pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &reg);
+		reg &= ~0x3f;
+		reg |= 0x1b;
+		pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
+
+		/* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+		pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+		reg &= ~0xc0;
+		reg |= 0x40;
+		pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
+		/* set SW1C staby volatage 0.975V*/
+		pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
+		reg &= ~0x3f;
+		reg |= 0x1b;
+		pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
+
+		/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+		pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+		reg &= ~0xc0;
+		reg |= 0x40;
+		pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+	}
 
 	return 0;
 }
@@ -933,7 +1003,10 @@ int power_init_board(void)
 	if (!dev)
 		return -ENODEV;
 
-	ret = pfuze_mode_init(dev, APS_PFM);
+	if (is_mx6dqp())
+		ret = pfuze_mode_init(dev, APS_APS);
+	else
+		ret = pfuze_mode_init(dev, APS_PFM);
 	if (ret < 0)
 		return ret;
 
@@ -949,14 +1022,57 @@ int power_init_board(void)
 	reg |= LDOB_3_00V;
 	pmic_reg_write(dev, PFUZE100_VGEN5VOL, reg);
 
-	return 0;
-}
-#endif
+	if (is_mx6dqp()) {
+		/* set SW1C staby volatage 1.075V*/
+		reg = pmic_reg_read(dev, PFUZE100_SW1CSTBY);
+		reg &= ~0x3f;
+		reg |= 0x1f;
+		pmic_reg_write(dev, PFUZE100_SW1CSTBY, reg);
+
+		/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+		reg = pmic_reg_read(dev, PFUZE100_SW1CCONF);
+		reg &= ~0xc0;
+		reg |= 0x40;
+		pmic_reg_write(dev, PFUZE100_SW1CCONF, reg);
+
+		/* set SW2/VDDARM staby volatage 0.975V*/
+		reg = pmic_reg_read(dev, PFUZE100_SW2STBY);
+		reg &= ~0x3f;
+		reg |= 0x17;
+		pmic_reg_write(dev, PFUZE100_SW2STBY, reg);
+
+		/* set SW2/VDDARM step ramp up time to from 16us to 4us/25mV */
+		reg = pmic_reg_read(dev, PFUZE100_SW2CONF);
+		reg &= ~0xc0;
+		reg |= 0x40;
+		pmic_reg_write(dev, PFUZE100_SW2CONF, reg);
+	} else {
+		/* set SW1AB staby volatage 0.975V*/
+		reg = pmic_reg_read(dev, PFUZE100_SW1ABSTBY);
+		reg &= ~0x3f;
+		reg |= 0x1b;
+		pmic_reg_write(dev, PFUZE100_SW1ABSTBY, reg);
+
+		/* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+		reg = pmic_reg_read(dev, PFUZE100_SW1ABCONF);
+		reg &= ~0xc0;
+		reg |= 0x40;
+		pmic_reg_write(dev, PFUZE100_SW1ABCONF, reg);
+
+		/* set SW1C staby volatage 0.975V*/
+		reg = pmic_reg_read(dev, PFUZE100_SW1CSTBY);
+		reg &= ~0x3f;
+		reg |= 0x1b;
+		pmic_reg_write(dev, PFUZE100_SW1CSTBY, reg);
+
+		/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+		reg = pmic_reg_read(dev, PFUZE100_SW1CCONF);
+		reg &= ~0xc0;
+		reg |= 0x40;
+		pmic_reg_write(dev, PFUZE100_SW1CCONF, reg);
+	}
 
-#ifdef CONFIG_MXC_SPI
-int board_spi_cs_gpio(unsigned bus, unsigned cs)
-{
-	return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1;
+	return 0;
 }
 #endif