summaryrefslogtreecommitdiff
path: root/board/xilinx/common
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-09-29 22:43:59 +0000
committerwdenk <wdenk>2004-09-29 22:43:59 +0000
commita06752e36be7fc74b4a928026b63b1bf1764497e (patch)
treeb71ddbcee4e4cc03e8ea98738b605a1c3879a703 /board/xilinx/common
parentda93ed8147a000505ac7b7ed4e2fb50532596a3c (diff)
downloadu-boot-imx-a06752e36be7fc74b4a928026b63b1bf1764497e.zip
u-boot-imx-a06752e36be7fc74b4a928026b63b1bf1764497e.tar.gz
u-boot-imx-a06752e36be7fc74b4a928026b63b1bf1764497e.tar.bz2
* Patch by Sean Chang, 9 Aug 2004:
- Added I2C support for ML300. - Added support for ML300 to read out its environment information stored on the EEPROM. - Added support to use board specific parameters as part of U-Boot's environment information. - Updated MLD files to support configuration for new features above. * Patches by Travis Sawyer, 5 Aug 2004: - Remove incorrect bridge settings for eth group 6 - Add call to setup bridge in ppc_440x_eth_initialize - Fix ppc_440x_eth_init to reset the phy only if its the first time through, otherwise, just check the phy for the autonegotiated speed/duplex. This allows the use of netconsole - only print the speed/duplex the first time the phy is reset.
Diffstat (limited to 'board/xilinx/common')
-rw-r--r--board/xilinx/common/xipif_v1_23_b.c331
-rw-r--r--board/xilinx/common/xipif_v1_23_b.h53
2 files changed, 349 insertions, 35 deletions
diff --git a/board/xilinx/common/xipif_v1_23_b.c b/board/xilinx/common/xipif_v1_23_b.c
new file mode 100644
index 0000000..c7311ab
--- /dev/null
+++ b/board/xilinx/common/xipif_v1_23_b.c
@@ -0,0 +1,331 @@
+/* $Id: xipif_v1_23_b.c,v 1.1 2002/03/18 23:24:52 linnj Exp $ */
+/******************************************************************************
+*
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
+* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
+* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE.
+*
+* (c) Copyright 2002 Xilinx Inc.
+* All rights reserved.
+*
+******************************************************************************/
+/******************************************************************************
+*
+* FILENAME:
+*
+* xipif.c
+*
+* DESCRIPTION:
+*
+* This file contains the implementation of the XIpIf component. The
+* XIpIf component encapsulates the IPIF, which is the standard interface
+* that IP must adhere to when connecting to a bus. The purpose of this
+* component is to encapsulate the IPIF processing such that maintainability
+* is increased. This component does not provide a lot of abstraction from
+* from the details of the IPIF as it is considered a building block for
+* device drivers. A device driver designer must be familiar with the
+* details of the IPIF hardware to use this component.
+*
+* The IPIF hardware provides a building block for all hardware devices such
+* that each device does not need to reimplement these building blocks. The
+* IPIF contains other building blocks, such as FIFOs and DMA channels, which
+* are also common to many devices. These blocks are implemented as separate
+* hardware blocks and instantiated within the IPIF. The primary hardware of
+* the IPIF which is implemented by this software component is the interrupt
+* architecture. Since there are many blocks of a device which may generate
+* interrupts, all the interrupt processing is contained in the common part
+* of the device, the IPIF. This interrupt processing is for the device level
+* only and does not include any processing for the interrupt controller.
+*
+* A device is a mechanism such as an Ethernet MAC. The device is made
+* up of several parts which include an IPIF and the IP. The IPIF contains most
+* of the device infrastructure which is common to all devices, such as
+* interrupt processing, DMA channels, and FIFOs. The infrastructure may also
+* be referred to as IPIF internal blocks since they are part of the IPIF and
+* are separate blocks that can be selected based upon the needs of the device.
+* The IP of the device is the logic that is unique to the device and interfaces
+* to the IPIF of the device.
+*
+* In general, there are two levels of registers within the IPIF. The first
+* level, referred to as the device level, contains registers which are for the
+* entire device. The second level, referred to as the IP level, contains
+* registers which are specific to the IP of the device. The two levels of
+* registers are designed to be hierarchical such that the device level is
+* is a more general register set above the more specific registers of the IP.
+* The IP level of registers provides functionality which is typically common
+* across all devices and allows IP designers to focus on the unique aspects
+* of the IP.
+*
+* The interrupt registers of the IPIF are parameterizable such that the only
+* the number of bits necessary for the device are implemented. The functions
+* of this component do not attempt to validate that the passed in arguments are
+* valid based upon the number of implemented bits. This is necessary to
+* maintain the level of performance required for the common components. Bits
+* of the registers are assigned starting at the least significant bit of the
+* registers.
+*
+* Critical Sections
+*
+* It is the responsibility of the device driver designer to use critical
+* sections as necessary when calling functions of the IPIF. This component
+* does not use critical sections and it does access registers using
+* read-modify-write operations. Calls to IPIF functions from a main thread
+* and from an interrupt context could produce unpredictable behavior such that
+* the caller must provide the appropriate critical sections.
+*
+* Mutual Exclusion
+*
+* The functions of the IPIF are not thread safe such that the caller of all
+* functions is responsible for ensuring mutual exclusion for an IPIF. Mutual
+* exclusion across multiple IPIF components is not necessary.
+*
+* NOTES:
+*
+* None.
+*
+* MODIFICATION HISTORY:
+*
+* Ver Who Date Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.23b jhl 02/27/01 Repartioned to reduce size
+*
+******************************************************************************/
+
+/***************************** Include Files *********************************/
+
+#include "xipif_v1_23_b.h"
+#include "xio.h"
+
+/************************** Constant Definitions *****************************/
+
+/* the following constant is used to generate bit masks for register testing
+ * in the self test functions, it defines the starting bit mask that is to be
+ * shifted from the LSB to MSB in creating a register test mask
+ */
+#define XIIF_V123B_FIRST_BIT_MASK 1UL
+
+/**************************** Type Definitions *******************************/
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/************************** Variable Definitions *****************************/
+
+/************************** Function Prototypes ******************************/
+
+static XStatus IpIntrSelfTest(u32 RegBaseAddress, u32 IpRegistersWidth);
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* XIpIf_SelfTest
+*
+* DESCRIPTION:
+*
+* This function performs a self test on the specified IPIF component. Many
+* of the registers in the IPIF are tested to ensure proper operation. This
+* function is destructive because the IPIF is reset at the start of the test
+* and at the end of the test to ensure predictable results. The IPIF reset
+* also resets the entire device that uses the IPIF. This function exits with
+* all interrupts for the device disabled.
+*
+* ARGUMENTS:
+*
+* InstancePtr points to the XIpIf to operate on.
+*
+* DeviceRegistersWidth contains the number of bits in the device interrupt
+* registers. The hardware is parameterizable such that only the number of bits
+* necessary to support a device are implemented. This value must be between 0
+* and 32 with 0 indicating there are no device interrupt registers used.
+*
+* IpRegistersWidth contains the number of bits in the IP interrupt registers
+* of the device. The hardware is parameterizable such that only the number of
+* bits necessary to support a device are implemented. This value must be
+* between 0 and 32 with 0 indicating there are no IP interrupt registers used.
+*
+* RETURN VALUE:
+*
+* A value of XST_SUCCESS indicates the test was successful with no errors.
+* Any one of the following error values may also be returned.
+*
+* XST_IPIF_RESET_REGISTER_ERROR The value of a register at reset was
+* not valid
+* XST_IPIF_IP_STATUS_ERROR A write to the IP interrupt status
+* register did not read back correctly
+* XST_IPIF_IP_ACK_ERROR One or more bits in the IP interrupt
+* status register did not reset when acked
+* XST_IPIF_IP_ENABLE_ERROR The IP interrupt enable register
+* did not read back correctly based upon
+* what was written to it
+*
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+
+/* the following constant defines the maximum number of bits which may be
+ * used in the registers at the device and IP levels, this is based upon the
+ * number of bits available in the registers
+ */
+#define XIIF_V123B_MAX_REG_BIT_COUNT 32
+
+XStatus
+XIpIfV123b_SelfTest(u32 RegBaseAddress, u8 IpRegistersWidth)
+{
+ XStatus Status;
+
+ /* assert to verify arguments are valid */
+
+ XASSERT_NONVOID(IpRegistersWidth <= XIIF_V123B_MAX_REG_BIT_COUNT);
+
+ /* reset the IPIF such that it's in a known state before the test
+ * and interrupts are globally disabled
+ */
+ XIIF_V123B_RESET(RegBaseAddress);
+
+ /* perform the self test on the IP interrupt registers, if
+ * it is not successful exit with the status
+ */
+ Status = IpIntrSelfTest(RegBaseAddress, IpRegistersWidth);
+ if (Status != XST_SUCCESS) {
+ return Status;
+ }
+
+ /* reset the IPIF such that it's in a known state before exiting test */
+
+ XIIF_V123B_RESET(RegBaseAddress);
+
+ /* reaching this point means there were no errors, return success */
+
+ return XST_SUCCESS;
+}
+
+/******************************************************************************
+*
+* FUNCTION:
+*
+* IpIntrSelfTest
+*
+* DESCRIPTION:
+*
+* Perform a self test on the IP interrupt registers of the IPIF. This
+* function modifies registers of the IPIF such that they are not guaranteed
+* to be in the same state when it returns. Any bits in the IP interrupt
+* status register which are set are assumed to be set by default after a reset
+* and are not tested in the test.
+*
+* ARGUMENTS:
+*
+* InstancePtr points to the XIpIf to operate on.
+*
+* IpRegistersWidth contains the number of bits in the IP interrupt registers
+* of the device. The hardware is parameterizable such that only the number of
+* bits necessary to support a device are implemented. This value must be
+* between 0 and 32 with 0 indicating there are no IP interrupt registers used.
+*
+* RETURN VALUE:
+*
+* A status indicating XST_SUCCESS if the test was successful. Otherwise, one
+* of the following values is returned.
+*
+* XST_IPIF_RESET_REGISTER_ERROR The value of a register at reset was
+* not valid
+* XST_IPIF_IP_STATUS_ERROR A write to the IP interrupt status
+* register did not read back correctly
+* XST_IPIF_IP_ACK_ERROR One or more bits in the IP status
+* register did not reset when acked
+* XST_IPIF_IP_ENABLE_ERROR The IP interrupt enable register
+* did not read back correctly based upon
+* what was written to it
+* NOTES:
+*
+* None.
+*
+******************************************************************************/
+static XStatus
+IpIntrSelfTest(u32 RegBaseAddress, u32 IpRegistersWidth)
+{
+ /* ensure that the IP interrupt interrupt enable register is zero
+ * as it should be at reset, the interrupt status is dependent upon the
+ * IP such that it's reset value is not known
+ */
+ if (XIIF_V123B_READ_IIER(RegBaseAddress) != 0) {
+ return XST_IPIF_RESET_REGISTER_ERROR;
+ }
+
+ /* if there are any used IP interrupts, then test all of the interrupt
+ * bits in all testable registers
+ */
+ if (IpRegistersWidth > 0) {
+ u32 BitCount;
+ u32 IpInterruptMask = XIIF_V123B_FIRST_BIT_MASK;
+ u32 Mask = XIIF_V123B_FIRST_BIT_MASK; /* bits assigned MSB to LSB */
+ u32 InterruptStatus;
+
+ /* generate the register masks to be used for IP register tests, the
+ * number of bits supported by the hardware is parameterizable such
+ * that only that number of bits are implemented in the registers, the
+ * bits are allocated starting at the MSB of the registers
+ */
+ for (BitCount = 1; BitCount < IpRegistersWidth; BitCount++) {
+ Mask = Mask << 1;
+ IpInterruptMask |= Mask;
+ }
+
+ /* get the current IP interrupt status register contents, any bits
+ * already set must default to 1 at reset in the device and these
+ * bits can't be tested in the following test, remove these bits from
+ * the mask that was generated for the test
+ */
+ InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
+ IpInterruptMask &= ~InterruptStatus;
+
+ /* set the bits in the device status register and verify them by reading
+ * the register again, all bits of the register are latched
+ */
+ XIIF_V123B_WRITE_IISR(RegBaseAddress, IpInterruptMask);
+ InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
+ if ((InterruptStatus & IpInterruptMask) != IpInterruptMask)
+ {
+ return XST_IPIF_IP_STATUS_ERROR;
+ }
+
+ /* test to ensure that the bits set in the IP interrupt status register
+ * can be cleared by acknowledging them in the IP interrupt status
+ * register then read it again and verify it was cleared
+ */
+ XIIF_V123B_WRITE_IISR(RegBaseAddress, IpInterruptMask);
+ InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
+ if ((InterruptStatus & IpInterruptMask) != 0) {
+ return XST_IPIF_IP_ACK_ERROR;
+ }
+
+ /* set the IP interrupt enable set register and then read the IP
+ * interrupt enable register and verify the interrupts were enabled
+ */
+ XIIF_V123B_WRITE_IIER(RegBaseAddress, IpInterruptMask);
+ if (XIIF_V123B_READ_IIER(RegBaseAddress) != IpInterruptMask) {
+ return XST_IPIF_IP_ENABLE_ERROR;
+ }
+
+ /* clear the IP interrupt enable register and then read the
+ * IP interrupt enable register and verify the interrupts were disabled
+ */
+ XIIF_V123B_WRITE_IIER(RegBaseAddress, 0);
+ if (XIIF_V123B_READ_IIER(RegBaseAddress) != 0) {
+ return XST_IPIF_IP_ENABLE_ERROR;
+ }
+ }
+ return XST_SUCCESS;
+}
diff --git a/board/xilinx/common/xipif_v1_23_b.h b/board/xilinx/common/xipif_v1_23_b.h
index b1520e9..3ce1fff 100644
--- a/board/xilinx/common/xipif_v1_23_b.h
+++ b/board/xilinx/common/xipif_v1_23_b.h
@@ -1,39 +1,22 @@
+/* $Id: xipif_v1_23_b.h,v 1.1 2002/03/18 23:24:52 linnj Exp $ */
/******************************************************************************
*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
+* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
+* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
+* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE.
+*
+* (c) Copyright 2002 Xilinx Inc.
+* All rights reserved.
*
******************************************************************************/
/******************************************************************************
@@ -575,7 +558,7 @@
*
* RETURN VALUE:
*
-* TRUE if interrupts are enabled for the IPIF, FALSE otherwise.
+* XTRUE if interrupts are enabled for the IPIF, XFALSE otherwise.
*
* NOTES:
*