Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master

25 files changed, 682 insertions, 345 deletions

diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile
index d022831..16e0b66 100644
--- a/board/xes/common/Makefile
+++ b/board/xes/common/Makefile
@@ -32,7 +32,11 @@ LIB	= $(obj)lib$(VENDOR).a
 COBJS-$(CONFIG_FSL_PCI_INIT)	+= fsl_8xxx_pci.o
 COBJS-$(CONFIG_MPC8572)		+= fsl_8xxx_clk.o
 COBJS-$(CONFIG_MPC86xx)		+= fsl_8xxx_clk.o
+COBJS-$(CONFIG_P2020)		+= fsl_8xxx_clk.o
 COBJS-$(CONFIG_FSL_DDR2)	+= fsl_8xxx_ddr.o
+COBJS-$(CONFIG_FSL_DDR3)	+= fsl_8xxx_ddr.o
+COBJS-$(CONFIG_MPC85xx)		+= fsl_8xxx_misc.o board.o
+COBJS-$(CONFIG_MPC86xx)		+= fsl_8xxx_misc.o board.o
 COBJS-$(CONFIG_NAND_ACTL)	+= actl_nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
diff --git a/board/xes/common/board.c b/board/xes/common/board.c
new file mode 100644
index 0000000..738f0a6
--- /dev/null
+++ b/board/xes/common/board.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2009 Extreme Engineering Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include "fsl_8xxx_misc.h"
+
+int checkboard(void)
+{
+	char name[] = CONFIG_SYS_BOARD_NAME;
+	char *s;
+
+#ifdef CONFIG_SYS_FORM_CUSTOM
+	s = "Custom";
+#elif CONFIG_SYS_FORM_6U_CPCI
+	s = "6U CompactPCI";
+#elif CONFIG_SYS_FORM_ATCA_PMC
+	s = "ATCA w/PMC";
+#elif CONFIG_SYS_FORM_ATCA_AMC
+	s = "ATCA w/AMC";
+#elif CONFIG_SYS_FORM_VME
+	s = "VME";
+#elif CONFIG_SYS_FORM_6U_VPX
+	s = "6U VPX";
+#elif CONFIG_SYS_FORM_PMC
+	s = "PMC";
+#elif CONFIG_SYS_FORM_PCI
+	s = "PCI";
+#elif CONFIG_SYS_FORM_3U_CPCI
+	s = "3U CompactPCI";
+#elif CONFIG_SYS_FORM_AMC
+	s = "AdvancedMC";
+#elif CONFIG_SYS_FORM_XMC
+	s = "XMC";
+#elif CONFIG_SYS_FORM_PMC_XMC
+	s = "PMC/XMC";
+#elif CONFIG_SYS_FORM_PCI_EXPRESS
+	s = "PCI Express";
+#elif CONFIG_SYS_FORM_3U_VPX
+	s = "3U VPX";
+#else
+#error "Form factor not defined"
+#endif
+
+	name[strlen(name) - 1] += get_board_derivative();
+	printf("Board: X-ES %s %s SBC\n", name, s);
+
+	/* Display board specific information */
+	puts("       ");
+	if ((s = getenv("board_rev")))
+		printf("Rev %s, ", s);
+	if ((s = getenv("serial#")))
+		printf("Serial# %s, ", s);
+	if ((s = getenv("board_cfg")))
+		printf("Cfg %s", s);
+	puts("\n");
+
+	return 0;
+}
diff --git a/board/xes/common/fsl_8xxx_clk.c b/board/xes/common/fsl_8xxx_clk.c
index f4a17b7..20d0a30 100644
--- a/board/xes/common/fsl_8xxx_clk.c
+++ b/board/xes/common/fsl_8xxx_clk.c
@@ -38,7 +38,11 @@ unsigned long get_board_sys_clk(ulong dummy)
 	if (in_be32(&gur->gpporcr) & 0x10000)
 		return 66666666;
 	else
+#ifdef CONFIG_P2020
+		return 100000000;
+#else
 		return 50000000;
+#endif
 }
 
 #ifdef CONFIG_MPC85xx
@@ -54,6 +58,13 @@ unsigned long get_board_ddr_clk(ulong dummy)
 	if (ddr_ratio == 0x7)
 		return get_board_sys_clk(dummy);
 
+#ifdef CONFIG_P2020
+	if (in_be32(&gur->gpporcr) & 0x20000)
+		return 66666666;
+	else
+		return 100000000;
+#else
 	return 66666666;
+#endif
 }
 #endif
diff --git a/board/xes/common/fsl_8xxx_misc.c b/board/xes/common/fsl_8xxx_misc.c
new file mode 100644
index 0000000..b7fa695
--- /dev/null
+++ b/board/xes/common/fsl_8xxx_misc.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+#ifdef CONFIG_PCA953X
+#include <pca953x.h>
+
+/*
+ * Determine if a board's flashes are write protected
+ */
+int board_flash_wp_on(void)
+{
+	if (pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) &
+			CONFIG_SYS_PCA953X_NVM_WP)
+		return 1;
+
+	return 0;
+}
+#endif
+
+/*
+ * Return a board's derivative model number.  For example:
+ * return 2 for the XPedite5372 and return 1 for the XPedite5201.
+ */
+uint get_board_derivative(void)
+{
+#if defined(CONFIG_MPC85xx)
+       volatile ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+#elif defined(CONFIG_MPC86xx)
+       volatile immap_t *immap = (immap_t *)CONFIG_SYS_CCSRBAR;
+       volatile ccsr_gur_t *gur = &immap->im_gur;
+#endif
+
+       /*
+        * The top 4 lines of the local bus address are pulled low/high and
+        * can be read to determine the least significant digit of a board's
+        * model number.
+        */
+       return gur->gpporcr >> 28;
+}
+
+
diff --git a/board/xes/common/fsl_8xxx_misc.h b/board/xes/common/fsl_8xxx_misc.h
new file mode 100644
index 0000000..ecc70da
--- /dev/null
+++ b/board/xes/common/fsl_8xxx_misc.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FSL_8XXX_MISC_H___
+#define __FSL_8XXX_MISC_H___
+
+uint get_board_derivative(void);
+
+#endif /* __FSL_8XXX_MISC_H__ */
diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c
index ece7882..f425cee 100644
--- a/board/xes/common/fsl_8xxx_pci.c
+++ b/board/xes/common/fsl_8xxx_pci.c
@@ -25,10 +25,10 @@
 #include <pci.h>
 #include <asm/fsl_pci.h>
 #include <asm/io.h>
+#include <linux/compiler.h>
 #include <libfdt.h>
 #include <fdt_support.h>
 
-int first_free_busno = 0;
 
 #ifdef CONFIG_PCI1
 static struct pci_controller pci1_hose;
@@ -43,111 +43,6 @@ static struct pci_controller pcie2_hose;
 static struct pci_controller pcie3_hose;
 #endif
 
-#ifdef CONFIG_MPC8572
-/* Correlate host/agent POR bits to usable info. Table 4-14 */
-struct host_agent_cfg_t {
-	uchar pcie_root[3];
-	uchar rio_host;
-} host_agent_cfg[8] = {
-	{{0, 0, 0}, 0},
-	{{0, 1, 1}, 1},
-	{{1, 0, 1}, 0},
-	{{1, 1, 0}, 1},
-	{{0, 0, 1}, 0},
-	{{0, 1, 0}, 1},
-	{{1, 0, 0}, 0},
-	{{1, 1, 1}, 1}
-};
-
-/* Correlate port width POR bits to usable info. Table 4-15 */
-struct io_port_cfg_t {
-	uchar pcie_width[3];
-	uchar rio_width;
-} io_port_cfg[16] = {
-	{{0, 0, 0}, 0},
-	{{0, 0, 0}, 0},
-	{{4, 0, 0}, 0},
-	{{4, 4, 0}, 0},
-	{{0, 0, 0}, 0},
-	{{0, 0, 0}, 0},
-	{{0, 0, 0}, 4},
-	{{4, 2, 2}, 0},
-	{{0, 0, 0}, 0},
-	{{0, 0, 0}, 0},
-	{{0, 0, 0}, 0},
-	{{4, 0, 0}, 4},
-	{{4, 0, 0}, 4},
-	{{0, 0, 0}, 4},
-	{{0, 0, 0}, 4},
-	{{8, 0, 0}, 0},
-};
-#elif defined CONFIG_MPC8548
-/* Correlate host/agent POR bits to usable info. Table 4-12 */
-struct host_agent_cfg_t {
-	uchar pci_host[2];
-	uchar pcie_root[1];
-	uchar rio_host;
-} host_agent_cfg[8] = {
-	{{1, 1}, {0}, 0},
-	{{1, 1}, {1}, 0},
-	{{1, 1}, {0}, 1},
-	{{0, 0}, {0}, 0}, /* reserved */
-	{{0, 1}, {1}, 0},
-	{{1, 1}, {1}, 0},
-	{{0, 1}, {1}, 1},
-	{{1, 1}, {1}, 1}
-};
-
-/* Correlate port width POR bits to usable info. Table 4-13 */
-struct io_port_cfg_t {
-	uchar pcie_width[1];
-	uchar rio_width;
-} io_port_cfg[8] = {
-	{{0}, 0},
-	{{0}, 0},
-	{{0}, 0},
-	{{4}, 4},
-	{{4}, 4},
-	{{0}, 4},
-	{{0}, 4},
-	{{8}, 0},
-};
-#elif defined CONFIG_MPC86xx
-/* Correlate host/agent POR bits to usable info. Table 4-17 */
-struct host_agent_cfg_t {
-	uchar pcie_root[2];
-	uchar rio_host;
-} host_agent_cfg[8] = {
-	{{0, 0}, 0},
-	{{1, 0}, 1},
-	{{0, 1}, 0},
-	{{1, 1}, 1}
-};
-
-/* Correlate port width POR bits to usable info. Table 4-16 */
-struct io_port_cfg_t {
-	uchar pcie_width[2];
-	uchar rio_width;
-} io_port_cfg[16] = {
-	{{0, 0}, 0},
-	{{0, 0}, 0},
-	{{8, 0}, 0},
-	{{8, 8}, 0},
-	{{0, 0}, 0},
-	{{8, 0}, 4},
-	{{8, 0}, 4},
-	{{8, 0}, 4},
-	{{0, 0}, 0},
-	{{0, 0}, 4},
-	{{0, 0}, 4},
-	{{0, 0}, 4},
-	{{0, 0}, 0},
-	{{0, 0}, 0},
-	{{0, 8}, 0},
-	{{8, 8}, 0},
-};
-#endif
-
 /*
  * 85xx and 86xx share naming conventions, but different layout.
  * Correlate names to CPU-specific values to share common
@@ -173,22 +68,22 @@ struct io_port_cfg_t {
 
 void pci_init_board(void)
 {
-	struct pci_controller *hose;
-	volatile ccsr_fsl_pci_t *pci;
-	int width;
-	int host;
+	struct fsl_pci_info pci_info[3];
+	int first_free_busno = 0;
+	int num = 0;
+	int pcie_ep;
+	__maybe_unused int pcie_configured;
+
 #if defined(CONFIG_MPC85xx)
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #elif defined(CONFIG_MPC86xx)
 	immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 #endif
-	uint devdisr = in_be32(&gur->devdisr);
-	uint io_sel = (in_be32(&gur->pordevsr) & MPC8xxx_PORDEVSR_IO_SEL) >>
+	u32 devdisr = in_be32(&gur->devdisr);
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	__maybe_unused uint io_sel = (pordevsr & MPC8xxx_PORDEVSR_IO_SEL) >>
 			MPC8xxx_PORDEVSR_IO_SEL_SHIFT;
-	uint host_agent = (in_be32(&gur->porbmsr) & MPC8xxx_PORBMSR_HA) >>
-			MPC8xxx_PORBMSR_HA_SHIFT;
-	struct pci_region *r;
 
 #ifdef CONFIG_PCI1
 	uint pci_spd_norm = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_SPD;
@@ -197,49 +92,19 @@ void pci_init_board(void)
 	uint pcix = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1;
 	uint freq = CONFIG_SYS_CLK_FREQ / 1000 / 1000;
 
-	width = 0; /* Silence compiler warning... */
-	io_sel &= 0xf; /* Silence compiler warning... */
-	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
-	hose = &pci1_hose;
-	host = host_agent_cfg[host_agent].pci_host[0];
-	r = hose->regions;
-
 	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+		SET_STD_PCI_INFO(pci_info[num], 1);
+		pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
 		printf("\n    PCI1: %d bit %s, %s %d MHz, %s, %s\n",
 			pci_32 ? 32 : 64,
 			pcix ? "PCIX" : "PCI",
 			pci_spd_norm ? ">=" : "<=",
 			pcix ? freq * 2 : freq,
-			host ? "host" : "agent",
+			pcie_ep ? "agent" : "host",
 			pci_arb ? "arbiter" : "external-arbiter");
 
-		/* outbound memory */
-		pci_set_region(r++,
-				CONFIG_SYS_PCI1_MEM_BASE,
-				CONFIG_SYS_PCI1_MEM_PHYS,
-				CONFIG_SYS_PCI1_MEM_SIZE,
-				PCI_REGION_MEM);
-
-		/* outbound io */
-		pci_set_region(r++,
-				CONFIG_SYS_PCI1_IO_BASE,
-				CONFIG_SYS_PCI1_IO_PHYS,
-				CONFIG_SYS_PCI1_IO_SIZE,
-				PCI_REGION_IO);
-
-		hose->region_count = r - hose->regions;
-
-		hose->first_busno = first_free_busno;
-
-		fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
-		/* Unlock inbound PCI configuration cycles */
-		if (!host)
-			fsl_pci_config_unlock(hose);
-
-		first_free_busno = hose->last_busno + 1;
-		printf("    PCI1 on bus %02x - %02x\n",
-			hose->first_busno, hose->last_busno);
+		first_free_busno = fsl_pci_init_port(&pci_info[num++],
+					&pci1_hose, first_free_busno);
 	} else {
 		printf("    PCI1: disabled\n");
 	}
@@ -247,148 +112,53 @@ void pci_init_board(void)
 	/* PCI1 not present on MPC8572 */
 	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1);
 #endif
-#ifdef CONFIG_PCIE1
-	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
-	hose = &pcie1_hose;
-	host = host_agent_cfg[host_agent].pcie_root[0];
-	width = io_port_cfg[io_sel].pcie_width[0];
-	r = hose->regions;
-
-	if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) {
-		printf("\n    PCIE1 connected as %s (x%d)",
-			host ? "Root Complex" : "Endpoint", width);
-		if (in_be32(&pci->pme_msg_det)) {
-			out_be32(&pci->pme_msg_det, 0xffffffff);
-			debug(" with errors.  Clearing.  Now 0x%08x",
-				in_be32(&pci->pme_msg_det));
-		}
-		printf("\n");
-
-		/* outbound memory */
-		pci_set_region(r++,
-				CONFIG_SYS_PCIE1_MEM_BASE,
-				CONFIG_SYS_PCIE1_MEM_PHYS,
-				CONFIG_SYS_PCIE1_MEM_SIZE,
-				PCI_REGION_MEM);
-
-		/* outbound io */
-		pci_set_region(r++,
-				CONFIG_SYS_PCIE1_IO_BASE,
-				CONFIG_SYS_PCIE1_IO_PHYS,
-				CONFIG_SYS_PCIE1_IO_SIZE,
-				PCI_REGION_IO);
-
-		hose->region_count = r - hose->regions;
-
-		hose->first_busno = first_free_busno;
-
-		fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
 
-		/* Unlock inbound PCI configuration cycles */
-		if (!host)
-			fsl_pci_config_unlock(hose);
-
-		first_free_busno = hose->last_busno + 1;
-		printf("    PCIE1 on bus %02x - %02x\n",
-				hose->first_busno, hose->last_busno);
+#ifdef CONFIG_PCIE1
+	pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+
+	if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) {
+		SET_STD_PCIE_INFO(pci_info[num], 1);
+		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
+		printf("    PCIE1 connected as %s\n",
+			pcie_ep ? "Endpoint" : "Root Complex");
+		first_free_busno = fsl_pci_init_port(&pci_info[num++],
+					&pcie1_hose, first_free_busno);
+	} else {
+		printf("    PCIE1: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE1);
 #endif /* CONFIG_PCIE1 */
 
 #ifdef CONFIG_PCIE2
-	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
-	hose = &pcie2_hose;
-	host = host_agent_cfg[host_agent].pcie_root[1];
-	width = io_port_cfg[io_sel].pcie_width[1];
-	r = hose->regions;
-
-	if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) {
-		printf("\n    PCIE2 connected as %s (x%d)",
-			host ? "Root Complex" : "Endpoint", width);
-		if (in_be32(&pci->pme_msg_det)) {
-			out_be32(&pci->pme_msg_det, 0xffffffff);
-			debug(" with errors.  Clearing.  Now 0x%08x",
-				in_be32(&pci->pme_msg_det));
-		}
-		printf("\n");
-
-		/* outbound memory */
-		pci_set_region(r++,
-				CONFIG_SYS_PCIE2_MEM_BASE,
-				CONFIG_SYS_PCIE2_MEM_PHYS,
-				CONFIG_SYS_PCIE2_MEM_SIZE,
-				PCI_REGION_MEM);
-
-		/* outbound io */
-		pci_set_region(r++,
-				CONFIG_SYS_PCIE2_IO_BASE,
-				CONFIG_SYS_PCIE2_IO_PHYS,
-				CONFIG_SYS_PCIE2_IO_SIZE,
-				PCI_REGION_IO);
-
-		hose->region_count = r - hose->regions;
-
-		hose->first_busno = first_free_busno;
-
-		fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
-		/* Unlock inbound PCI configuration cycles */
-		if (!host)
-			fsl_pci_config_unlock(hose);
-
-		first_free_busno = hose->last_busno + 1;
-		printf("    PCIE2 on bus %02x - %02x\n",
-				hose->first_busno, hose->last_busno);
+	pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
+
+	if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) {
+		SET_STD_PCIE_INFO(pci_info[num], 2);
+		pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
+		printf("    PCIE2 connected as %s\n",
+			pcie_ep ? "Endpoint" : "Root Complex");
+		first_free_busno = fsl_pci_init_port(&pci_info[num++],
+					&pcie2_hose, first_free_busno);
+	} else {
+		printf("    PCIE2: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE2);
 #endif /* CONFIG_PCIE2 */
 
 #ifdef CONFIG_PCIE3
-	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
-	hose = &pcie3_hose;
-	host = host_agent_cfg[host_agent].pcie_root[2];
-	width = io_port_cfg[io_sel].pcie_width[2];
-	r = hose->regions;
-
-	if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) {
-		printf("\n    PCIE3 connected as %s (x%d)",
-			host ? "Root Complex" : "Endpoint", width);
-		if (in_be32(&pci->pme_msg_det)) {
-			out_be32(&pci->pme_msg_det, 0xffffffff);
-			debug(" with errors.  Clearing.  Now 0x%08x",
-				in_be32(&pci->pme_msg_det));
-		}
-		printf("\n");
-
-		/* outbound memory */
-		pci_set_region(r++,
-				CONFIG_SYS_PCIE3_MEM_BASE,
-				CONFIG_SYS_PCIE3_MEM_PHYS,
-				CONFIG_SYS_PCIE3_MEM_SIZE,
-				PCI_REGION_MEM);
-
-		/* outbound io */
-		pci_set_region(r++,
-				CONFIG_SYS_PCIE3_IO_BASE,
-				CONFIG_SYS_PCIE3_IO_PHYS,
-				CONFIG_SYS_PCIE3_IO_SIZE,
-				PCI_REGION_IO);
-
-		hose->region_count = r - hose->regions;
-
-		hose->first_busno = first_free_busno;
-
-		fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
-		/* Unlock inbound PCI configuration cycles */
-		if (!host)
-			fsl_pci_config_unlock(hose);
-
-		first_free_busno = hose->last_busno + 1;
-		printf("    PCIE3 on bus %02x - %02x\n",
-				hose->first_busno, hose->last_busno);
+	pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
+
+	if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) {
+		SET_STD_PCIE_INFO(pci_info[num], 3);
+		pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
+		printf("    PCIE3 connected as %s\n",
+			pcie_ep ? "Endpoint" : "Root Complex");
+		first_free_busno = fsl_pci_init_port(&pci_info[num++],
+					&pcie3_hose, first_free_busno);
+	} else {
+		printf("    PCIE3: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE3);
diff --git a/board/xes/xpedite5170/Makefile b/board/xes/xpedite517x/Makefile
index fea6686..fea6686 100644
--- a/board/xes/xpedite5170/Makefile
+++ b/board/xes/xpedite517x/Makefile
diff --git a/board/xes/xpedite5170/ddr.c b/board/xes/xpedite517x/ddr.c
index 1d57d09..1d57d09 100644
--- a/board/xes/xpedite5170/ddr.c
+++ b/board/xes/xpedite517x/ddr.c
diff --git a/board/xes/xpedite5170/law.c b/board/xes/xpedite517x/law.c
index 0b7d9ef..0b7d9ef 100644
--- a/board/xes/xpedite5170/law.c
+++ b/board/xes/xpedite517x/law.c
diff --git a/board/xes/xpedite5170/xpedite5170.c b/board/xes/xpedite517x/xpedite517x.c
index 5822941..0f7fa6c 100644
--- a/board/xes/xpedite5170/xpedite5170.c
+++ b/board/xes/xpedite517x/xpedite517x.c
@@ -26,30 +26,12 @@
 #include <asm/io.h>
 #include <fdt_support.h>
 #include <pca953x.h>
+#include "../common/fsl_8xxx_misc.h"
 
 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_PCI)
 extern void ft_board_pci_setup(void *blob, bd_t *bd);
 #endif
 
-int checkboard(void)
-{
-	char *s;
-
-	printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME);
-	printf("       ");
-	s = getenv("board_rev");
-	if (s)
-		printf("Rev %s, ", s);
-	s = getenv("serial#");
-	if (s)
-		printf("Serial# %s, ", s);
-	s = getenv("board_cfg");
-	if (s)
-		printf("Cfg %s", s);
-	printf("\n");
-
-	return 0;
-}
 /*
  * Print out which flash was booted from and if booting from the 2nd flash,
  * swap flash chip selects to maintain consistent flash numbering/addresses.
diff --git a/board/xes/xpedite5200/Makefile b/board/xes/xpedite520x/Makefile
index 02fe8fc..02fe8fc 100644
--- a/board/xes/xpedite5200/Makefile
+++ b/board/xes/xpedite520x/Makefile
diff --git a/board/xes/xpedite5200/ddr.c b/board/xes/xpedite520x/ddr.c
index c5616d5..c5616d5 100644
--- a/board/xes/xpedite5200/ddr.c
+++ b/board/xes/xpedite520x/ddr.c
diff --git a/board/xes/xpedite5200/law.c b/board/xes/xpedite520x/law.c
index bbfcb9d..bbfcb9d 100644
--- a/board/xes/xpedite5200/law.c
+++ b/board/xes/xpedite520x/law.c
diff --git a/board/xes/xpedite5200/tlb.c b/board/xes/xpedite520x/tlb.c
index bd7bff8..bd7bff8 100644
--- a/board/xes/xpedite5200/tlb.c
+++ b/board/xes/xpedite520x/tlb.c
diff --git a/board/xes/xpedite5200/xpedite5200.c b/board/xes/xpedite520x/xpedite520x.c
index a2627f8..dc5c965 100644
--- a/board/xes/xpedite5200/xpedite5200.c
+++ b/board/xes/xpedite520x/xpedite520x.c
@@ -36,33 +36,6 @@
 
 extern void ft_board_pci_setup(void *blob, bd_t *bd);
 
-int checkboard(void)
-{
-	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
-	char *s;
-
-	printf("Board: X-ES %s PMC\n", CONFIG_SYS_BOARD_NAME);
-	printf("       ");
-	s = getenv("board_rev");
-	if (s)
-		printf("Rev %s, ", s);
-	s = getenv("serial#");
-	if (s)
-		printf("Serial# %s, ", s);
-	s = getenv("board_cfg");
-	if (s)
-		printf("Cfg %s", s);
-	printf("\n");
-
-	out_be32(&lbc->ltesr, 0xffffffff);	/* Clear LBC error IRQs */
-	out_be32(&lbc->lteir, 0xffffffff);	/* Enable LBC error IRQs */
-	out_be32(&ecm->eedr, 0xffffffff);	/* Clear ecm errors */
-	out_be32(&ecm->eeer, 0xffffffff);	/* Enable ecm errors */
-
-	return 0;
-}
-
 static void flash_cs_fixup(void)
 {
 	int flash_sel;
diff --git a/board/xes/xpedite5370/Makefile b/board/xes/xpedite537x/Makefile
index 919397c..919397c 100644
--- a/board/xes/xpedite5370/Makefile
+++ b/board/xes/xpedite537x/Makefile
diff --git a/board/xes/xpedite5370/ddr.c b/board/xes/xpedite537x/ddr.c
index 4d3f255..4d3f255 100644
--- a/board/xes/xpedite5370/ddr.c
+++ b/board/xes/xpedite537x/ddr.c
diff --git a/board/xes/xpedite5370/law.c b/board/xes/xpedite537x/law.c
index daee676..daee676 100644
--- a/board/xes/xpedite5370/law.c
+++ b/board/xes/xpedite537x/law.c
diff --git a/board/xes/xpedite5370/tlb.c b/board/xes/xpedite537x/tlb.c
index a465ce3..a465ce3 100644
--- a/board/xes/xpedite5370/tlb.c
+++ b/board/xes/xpedite537x/tlb.c
diff --git a/board/xes/xpedite5370/xpedite5370.c b/board/xes/xpedite537x/xpedite537x.c
index 2a060c2..89fa6c7 100644
--- a/board/xes/xpedite5370/xpedite5370.c
+++ b/board/xes/xpedite537x/xpedite537x.c
@@ -36,26 +36,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 extern void ft_board_pci_setup(void *blob, bd_t *bd);
 
-int checkboard(void)
-{
-	char *s;
-
-	printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME);
-	printf("       ");
-	s = getenv("board_rev");
-	if (s)
-		printf("Rev %s, ", s);
-	s = getenv("serial#");
-	if (s)
-		printf("Serial# %s, ", s);
-	s = getenv("board_cfg");
-	if (s)
-		printf("Cfg %s", s);
-	printf("\n");
-
-	return 0;
-}
-
 static void flash_cs_fixup(void)
 {
 	int flash_sel;
diff --git a/board/xes/xpedite550x/Makefile b/board/xes/xpedite550x/Makefile
new file mode 100644
index 0000000..8980a4b
--- /dev/null
+++ b/board/xes/xpedite550x/Makefile
@@ -0,0 +1,39 @@
+#
+# Copyright 2007-2008 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	+= $(BOARD).o
+COBJS-y	+= ddr.o
+COBJS-y	+= law.o
+COBJS-y	+= tlb.o
+
+SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS-y))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c
new file mode 100644
index 0000000..718cd98
--- /dev/null
+++ b/board/xes/xpedite550x/ddr.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright 2010 Extreme Engineering Solutions, Inc.
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address)
+{
+	i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
+		 sizeof(ddr3_spd_eeprom_t));
+}
+
+void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd,
+		      unsigned int ctrl_num)
+{
+	unsigned int i;
+	unsigned int i2c_address = 0;
+
+	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+		if (ctrl_num == 0 && i == 0)
+			i2c_address = SPD_EEPROM_ADDRESS1;
+		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
+	}
+}
+
+unsigned int fsl_ddr_get_mem_data_rate(void)
+{
+	return get_ddr_freq(0);
+}
+
+/*
+ *     There are traditionally three board-specific SDRAM timing parameters
+ *     which must be calculated based on the particular PCB artwork.  These are:
+ *     1.) CPO (Read Capture Delay)
+ *             - TIMING_CFG_2 register
+ *             Source: Calculation based on board trace lengths and
+ *                     chip-specific internal delays.
+ *     2.) CLK_ADJUST (Clock and Addr/Cmd alignment control)
+ *             - DDR_SDRAM_CLK_CNTL register
+ *             Source: Signal Integrity Simulations
+ *     3.) 2T Timing on Addr/Ctl
+ *             - TIMING_CFG_2 register
+ *             Source: Signal Integrity Simulations
+ *             Usually only needed with heavy load/very high speed (>DDR2-800)
+ *
+ *     ====== XPedite550x DDR3-800 read delay calculations ======
+ *
+ *     The P2020 processor provides an autoleveling option. Setting CPO to
+ *     0x1f enables this auto configuration.
+ */
+
+typedef struct {
+	unsigned short datarate_mhz_low;
+	unsigned short datarate_mhz_high;
+	unsigned char clk_adjust;
+	unsigned char cpo;
+} board_specific_parameters_t;
+
+const board_specific_parameters_t board_specific_parameters[][20] = {
+	{
+		/* Controller 0 */
+                {
+			/* DDR3-600/667 */
+			.datarate_mhz_low	= 500,
+			.datarate_mhz_high	= 750,
+			.clk_adjust		= 5,
+			.cpo			= 31,
+		},
+                {
+			/* DDR3-800 */
+			.datarate_mhz_low	= 750,
+			.datarate_mhz_high	= 850,
+			.clk_adjust		= 5,
+			.cpo			= 31,
+		},
+	},
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	const board_specific_parameters_t *pbsp =
+				&(board_specific_parameters[ctrl_num][0]);
+	u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
+				sizeof(board_specific_parameters[0][0]);
+	u32 i;
+	ulong ddr_freq;
+
+	/*
+	 * Set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
+	 * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
+	 * there are two dimms in the controller, set odt_rd_cfg to 3 and
+	 * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
+	 */
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (i&1) {	/* odd CS */
+			popts->cs_local_opts[i].odt_rd_cfg = 0;
+			popts->cs_local_opts[i].odt_wr_cfg = 0;
+		} else {	/* even CS */
+			if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) {
+				popts->cs_local_opts[i].odt_rd_cfg = 0;
+				popts->cs_local_opts[i].odt_wr_cfg = 4;
+			} else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
+				popts->cs_local_opts[i].odt_rd_cfg = 3;
+				popts->cs_local_opts[i].odt_wr_cfg = 3;
+			}
+		}
+	}
+
+	/*
+	 * Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
+	 */
+	ddr_freq = get_ddr_freq(0) / 1000000;
+
+	for (i = 0; i < num_params; i++) {
+		if (ddr_freq >= pbsp->datarate_mhz_low &&
+		    ddr_freq <= pbsp->datarate_mhz_high) {
+			popts->clk_adjust = pbsp->clk_adjust;
+			popts->cpo_override = pbsp->cpo;
+			popts->twoT_en = 0;
+		}
+		pbsp++;
+	}
+
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+
+	/*
+	 * Enable on-die termination.
+	 * From the Micron Technical Node TN-41-04, RTT_Nom should typically
+	 * be 30 to 40 ohms, while RTT_WR should be 120 ohms.  Setting RTT_WR
+	 * is handled in the Freescale DDR3 driver.  Set RTT_Nom here.
+	 */
+	popts->rtt_override = 1;
+	popts->rtt_override_value = 3;
+}
+
diff --git a/board/xes/xpedite550x/law.c b/board/xes/xpedite550x/law.c
new file mode 100644
index 0000000..4d4445d
--- /dev/null
+++ b/board/xes/xpedite550x/law.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2010 Extreme Engineering Solutions, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * Notes:
+ *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+	SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+#ifdef CONFIG_SYS_PCIE1_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
+#endif
+#ifdef CONFIG_SYS_PCIE2_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_2),
+#endif
+#ifdef CONFIG_SYS_PCIE3_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_3),
+	SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_3),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/xes/xpedite550x/tlb.c b/board/xes/xpedite550x/tlb.c
new file mode 100644
index 0000000..cf3ff4d
--- /dev/null
+++ b/board/xes/xpedite550x/tlb.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+		MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* W**G* - NOR flashes */
+	/* This will be changed to *I*G* after relocation to RAM. */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE2, CONFIG_SYS_FLASH_BASE2,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+		0, 0, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - CCSRBAR */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 1, BOOKE_PAGESZ_1M, 1),
+
+	/* *I*G* - NAND flash */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 2, BOOKE_PAGESZ_1M, 1),
+
+	/* **M** - Boot page for secondary processors */
+	SET_TLB_ENTRY(1, CONFIG_BPTR_VIRT_ADDR, CONFIG_BPTR_VIRT_ADDR,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
+		0, 3, BOOKE_PAGESZ_4K, 1),
+
+#ifdef CONFIG_PCIE1
+	/* *I*G* - PCIe */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 4, BOOKE_PAGESZ_1G, 1),
+#endif
+
+#ifdef CONFIG_PCIE2
+	/* *I*G* - PCIe */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 5, BOOKE_PAGESZ_256M, 1),
+#endif
+
+#ifdef CONFIG_PCIE3
+	/* *I*G* - PCIe */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 6, BOOKE_PAGESZ_256M, 1),
+#endif
+
+#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3)
+	/* *I*G* - PCIe */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 7, BOOKE_PAGESZ_64M, 1),
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/xes/xpedite550x/xpedite550x.c b/board/xes/xpedite550x/xpedite550x.c
new file mode 100644
index 0000000..2ad30a3
--- /dev/null
+++ b/board/xes/xpedite550x/xpedite550x.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2010 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <pca953x.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void ft_board_pci_setup(void *blob, bd_t *bd);
+
+static void flash_cs_fixup(void)
+{
+	int flash_sel;
+
+	/*
+	 * Print boot dev and swap flash flash chip selects if booted from 2nd
+	 * flash.  Swapping chip selects presents user with a common memory
+	 * map regardless of which flash was booted from.
+	 */
+	flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) &
+			CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS));
+	printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
+
+	if (flash_sel) {
+		set_lbc_br(0, CONFIG_SYS_BR1_PRELIM);
+		set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);
+
+		set_lbc_br(1, CONFIG_SYS_BR0_PRELIM);
+		set_lbc_or(1, CONFIG_SYS_OR0_PRELIM);
+	}
+}
+
+int board_early_init_r(void)
+{
+	/* Initialize PCA9557 devices */
+	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0);
+	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0);
+	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR2, 0xff, 0);
+	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR3, 0xff, 0);
+
+	/*
+	 * Remap NOR flash region to caching-inhibited
+	 * so that flash can be erased/programmed properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* Invalidate existing TLB entry for NOR flash */
+	disable_tlb(0);
+	set_tlb(1, (CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
+		(CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 0, BOOKE_PAGESZ_256M, 1);
+
+	flash_cs_fixup();
+
+	return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_PCI
+	ft_board_pci_setup(blob, bd);
+#endif
+	ft_cpu_setup(blob, bd);
+}
+#endif
+
+#ifdef CONFIG_MP
+extern void cpu_mp_lmb_reserve(struct lmb *lmb);
+
+void board_lmb_reserve(struct lmb *lmb)
+{
+	cpu_mp_lmb_reserve(lmb);
+}
+#endif