diff options
author | Andy Fleming <afleming@gmail.com> | 2015-11-04 15:48:32 -0600 |
---|---|---|
committer | York Sun <yorksun@freescale.com> | 2015-11-04 15:19:34 -0800 |
commit | 87e29878caba758ed3e09e9912ac8eb6dfc55f39 (patch) | |
tree | d98b04c33498eb2bb30dac21961d1bb32637823c /board/varisys/common/sys_eeprom.c | |
parent | c79e1c1ce9e5c1ddf6fac631e4741999f8a0cc58 (diff) | |
download | u-boot-imx-87e29878caba758ed3e09e9912ac8eb6dfc55f39.zip u-boot-imx-87e29878caba758ed3e09e9912ac8eb6dfc55f39.tar.gz u-boot-imx-87e29878caba758ed3e09e9912ac8eb6dfc55f39.tar.bz2 |
mpc85xx: Add support for the Varisys Cyrus board
This board runs a P5020 or P5040 chip, and utilizes
an EEPROM with similar formatting to the Freescale P5020DS.
Large amounts of this code were developed by
Adrian Cox <adrian at humboldt dot co dot uk>
Signed-off-by: Andy Fleming <afleming@gmail.com>
Reviewed-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'board/varisys/common/sys_eeprom.c')
-rw-r--r-- | board/varisys/common/sys_eeprom.c | 498 |
1 files changed, 498 insertions, 0 deletions
diff --git a/board/varisys/common/sys_eeprom.c b/board/varisys/common/sys_eeprom.c new file mode 100644 index 0000000..b55ab81 --- /dev/null +++ b/board/varisys/common/sys_eeprom.c @@ -0,0 +1,498 @@ +/* + * Based on board/freescale/common/sys_eeprom.c + * Copyright 2006, 2008-2009, 2011 Freescale Semiconductor + * + * This defines the API for storing board information in the + * eeprom. It has been adapted from an earlier version of the + * Freescale API, but has a number of key differences. Because + * the two APIs are independent and may diverge further, the + * Varisys version of the API is implemented separately here. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <linux/ctype.h> + +#include "eeprom.h" + +#ifdef CONFIG_SYS_I2C_EEPROM_NXID_MAC +#define MAX_NUM_PORTS CONFIG_SYS_I2C_EEPROM_NXID_MAC +#else +#define MAX_NUM_PORTS 8 +#endif +#define NXID_VERSION 0 + +/** + * static eeprom: EEPROM layout for NXID formats + * + * See Freescale application note AN3638 for details. + */ +static struct __attribute__ ((__packed__)) eeprom { + u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'NXID' */ + u8 sn[12]; /* 0x04 - 0x0F Serial Number */ + u8 errata[5]; /* 0x10 - 0x14 Errata Level */ + u8 date[6]; /* 0x15 - 0x1a Build Date */ + u8 res_0; /* 0x1b Reserved */ + u32 version; /* 0x1c - 0x1f NXID Version */ + u8 tempcal[8]; /* 0x20 - 0x27 Temperature Calibration Factors */ + u8 tempcalsys[2]; /* 0x28 - 0x29 System Temperature Calibration Factors */ + u8 tempcalflags; /* 0x2a Temperature Calibration Flags */ + u8 res_1[21]; /* 0x2b - 0x3f Reserved */ + u8 mac_count; /* 0x40 Number of MAC addresses */ + u8 mac_flag; /* 0x41 MAC table flags */ + u8 mac[MAX_NUM_PORTS][6]; /* 0x42 - x MAC addresses */ + u32 crc; /* x+1 CRC32 checksum */ +} e; + +/* Set to 1 if we've read EEPROM into memory */ +static int has_been_read; + +/* Is this a valid NXID EEPROM? */ +#define is_valid ((e.id[0] == 'N') || (e.id[1] == 'X') || \ + (e.id[2] == 'I') || (e.id[3] == 'D')) + +/** Fixed ID field in EEPROM */ +static unsigned char uid[16]; + +static int eeprom_bus_num = -1; +static int eeprom_addr; +static int eeprom_addr_len; + +/** + * This must be called before any eeprom access. + */ +void init_eeprom(int bus_num, int addr, int addr_len) +{ + eeprom_bus_num = bus_num; + eeprom_addr = addr; + eeprom_addr_len = addr_len; +} + +/** + * show_eeprom - display the contents of the EEPROM + */ +void show_eeprom(void) +{ + int i; + unsigned int crc; + + /* EEPROM tag ID, either CCID or NXID */ + printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], + be32_to_cpu(e.version)); + + /* Serial number */ + printf("SN: %s\n", e.sn); + + printf("UID: "); + for (i = 0; i < 16; i++) + printf("%02x", uid[i]); + printf("\n"); + + /* Errata level. */ + printf("Errata: %s\n", e.errata); + + /* Build date, BCD date values, as YYMMDDhhmmss */ + printf("Build date: 20%02x/%02x/%02x %02x:%02x:%02x %s\n", + e.date[0], e.date[1], e.date[2], + e.date[3] & 0x7F, e.date[4], e.date[5], + e.date[3] & 0x80 ? "PM" : ""); + + /* Show MAC addresses */ + for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) { + u8 *p = e.mac[i]; + + printf("Eth%u: %02x:%02x:%02x:%02x:%02x:%02x\n", i, + p[0], p[1], p[2], p[3], p[4], p[5]); + } + + crc = crc32(0, (void *)&e, sizeof(e) - 4); + + if (crc == be32_to_cpu(e.crc)) + printf("CRC: %08x\n", be32_to_cpu(e.crc)); + else + printf("CRC: %08x (should be %08x)\n", + be32_to_cpu(e.crc), crc); + +#ifdef DEBUG + printf("EEPROM dump: (0x%x bytes)\n", sizeof(e)); + for (i = 0; i < sizeof(e); i++) { + if ((i % 16) == 0) + printf("%02X: ", i); + printf("%02X ", ((u8 *)&e)[i]); + if (((i % 16) == 15) || (i == sizeof(e) - 1)) + printf("\n"); + } +#endif +} + +/** + * read_eeprom - read the EEPROM into memory + */ +int read_eeprom(void) +{ + int ret; + unsigned int bus; + + if (eeprom_bus_num < 0) { + printf("EEPROM not configured\n"); + return -1; + } + + if (has_been_read) + return 0; + + bus = i2c_get_bus_num(); + i2c_set_bus_num(eeprom_bus_num); + + ret = i2c_read(eeprom_addr, 0, eeprom_addr_len, + (void *)&e, sizeof(e)); + + + /* Fixed address of ID field */ + i2c_read(0x5f, 0x80, 1, uid, 16); + + i2c_set_bus_num(bus); + +#ifdef DEBUG + show_eeprom(); +#endif + + has_been_read = (ret == 0) ? 1 : 0; + + return ret; +} + +/** + * update_crc - update the CRC + * + * This function should be called after each update to the EEPROM structure, + * to make sure the CRC is always correct. + */ +static void update_crc(void) +{ + u32 crc, crc_offset = offsetof(struct eeprom, crc); + + crc = crc32(0, (void *)&e, crc_offset); + e.crc = cpu_to_be32(crc); +} + +/** + * prog_eeprom - write the EEPROM from memory + */ +static int prog_eeprom(void) +{ + int ret = 0; + int i; + void *p; + unsigned int bus; + + if (eeprom_bus_num < 0) { + printf("EEPROM not configured\n"); + return -1; + } + + /* Set the reserved values to 0xFF */ + e.res_0 = 0xFF; + memset(e.res_1, 0xFF, sizeof(e.res_1)); + update_crc(); + + bus = i2c_get_bus_num(); + i2c_set_bus_num(eeprom_bus_num); + + /* + * The AT24C02 datasheet says that data can only be written in page + * mode, which means 8 bytes at a time, and it takes up to 5ms to + * complete a given write. + */ + for (i = 0, p = &e; i < sizeof(e); i += 8, p += 8) { + ret = i2c_write(eeprom_addr, i, eeprom_addr_len, + p, min((int)(sizeof(e) - i), 8)); + if (ret) + break; + udelay(5000); /* 5ms write cycle timing */ + } + + if (!ret) { + /* Verify the write by reading back the EEPROM and comparing */ + struct eeprom e2; + + ret = i2c_read(eeprom_addr, 0, + eeprom_addr_len, (void *)&e2, sizeof(e2)); + if (!ret && memcmp(&e, &e2, sizeof(e))) + ret = -1; + } + + i2c_set_bus_num(bus); + + if (ret) { + printf("Programming failed.\n"); + has_been_read = 0; + return -1; + } + + printf("Programming passed.\n"); + return 0; +} + +/** + * h2i - converts hex character into a number + * + * This function takes a hexadecimal character (e.g. '7' or 'C') and returns + * the integer equivalent. + */ +static inline u8 h2i(char p) +{ + if ((p >= '0') && (p <= '9')) + return p - '0'; + + if ((p >= 'A') && (p <= 'F')) + return (p - 'A') + 10; + + if ((p >= 'a') && (p <= 'f')) + return (p - 'a') + 10; + + return 0; +} + +/** + * set_date - stores the build date into the EEPROM + * + * This function takes a pointer to a string in the format "YYMMDDhhmmss" + * (2-digit year, 2-digit month, etc), converts it to a 6-byte BCD string, + * and stores it in the build date field of the EEPROM local copy. + */ +static void set_date(const char *string) +{ + unsigned int i; + + if (strlen(string) != 12) { + printf("Usage: mac date YYMMDDhhmmss\n"); + return; + } + + for (i = 0; i < 6; i++) + e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]); + + update_crc(); +} + +/** + * set_mac_address - stores a MAC address into the EEPROM + * + * This function takes a pointer to MAC address string + * (i.e."XX:XX:XX:XX:XX:XX", where "XX" is a two-digit hex number) and + * stores it in one of the MAC address fields of the EEPROM local copy. + */ +static void set_mac_address(unsigned int index, const char *string) +{ + char *p = (char *)string; + unsigned int i; + + if ((index >= MAX_NUM_PORTS) || !string) { + printf("Usage: mac <n> XX:XX:XX:XX:XX:XX\n"); + return; + } + + for (i = 0; *p && (i < 6); i++) { + e.mac[index][i] = simple_strtoul(p, &p, 16); + if (*p == ':') + p++; + } + + update_crc(); +} + +int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + char cmd; + + if (argc == 1) { + show_eeprom(); + return 0; + } + + cmd = argv[1][0]; + + if (cmd == 'r') { + read_eeprom(); + return 0; + } + + if (cmd == 'i') { + memcpy(e.id, "NXID", sizeof(e.id)); + e.version = NXID_VERSION; + update_crc(); + return 0; + } + + if (!is_valid) { + printf("Please read the EEPROM ('r') and/or set the ID ('i') first.\n"); + return 0; + } + + if (argc == 2) { + switch (cmd) { + case 's': /* save */ + prog_eeprom(); + break; + default: + return cmd_usage(cmdtp); + } + + return 0; + } + + /* We know we have at least one parameter */ + + switch (cmd) { + case 'n': /* serial number */ + memset(e.sn, 0, sizeof(e.sn)); + strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1); + update_crc(); + break; + case 'e': /* errata */ + memset(e.errata, 0, 5); + strncpy((char *)e.errata, argv[2], 4); + update_crc(); + break; + case 'd': /* date BCD format YYMMDDhhmmss */ + set_date(argv[2]); + break; + case 'p': /* MAC table size */ + e.mac_count = simple_strtoul(argv[2], NULL, 16); + update_crc(); + break; + case '0' ... '9': /* "mac 0" through "mac 22" */ + set_mac_address(simple_strtoul(argv[1], NULL, 10), argv[2]); + break; + case 'h': /* help */ + default: + return cmd_usage(cmdtp); + } + + return 0; +} + +int mac_read_from_generic_eeprom(const char *envvar, int chip, + int address, int mac_bus) +{ + int ret; + unsigned int bus; + unsigned char mac[6]; + char ethaddr[18]; + + bus = i2c_get_bus_num(); + i2c_set_bus_num(mac_bus); + + ret = i2c_read(chip, address, 1, mac, 6); + + i2c_set_bus_num(bus); + + if (!ret) { + sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", + mac[0], + mac[1], + mac[2], + mac[3], + mac[4], + mac[5]); + + printf("MAC: %s\n", ethaddr); + setenv(envvar, ethaddr); + } + + return ret; +} + +void mac_read_from_fixed_id(void) +{ +#ifdef CONFIG_SYS_I2C_MAC1_CHIP_ADDR + mac_read_from_generic_eeprom("ethaddr", CONFIG_SYS_I2C_MAC1_CHIP_ADDR, + CONFIG_SYS_I2C_MAC1_DATA_ADDR, CONFIG_SYS_I2C_MAC1_BUS); +#endif +#ifdef CONFIG_SYS_I2C_MAC2_CHIP_ADDR + mac_read_from_generic_eeprom("eth1addr", CONFIG_SYS_I2C_MAC2_CHIP_ADDR, + CONFIG_SYS_I2C_MAC2_DATA_ADDR, CONFIG_SYS_I2C_MAC2_BUS); +#endif +} + +/** + * mac_read_from_eeprom - read the MAC addresses from EEPROM + * + * This function reads the MAC addresses from EEPROM and sets the + * appropriate environment variables for each one read. + * + * The environment variables are only set if they haven't been set already. + * This ensures that any user-saved variables are never overwritten. + * + * This function must be called after relocation. + * + * For NXID v1 EEPROMs, we support loading and up-converting the older NXID v0 + * format. In a v0 EEPROM, there are only eight MAC addresses and the CRC is + * located at a different offset. + */ +int mac_read_from_eeprom_common(void) +{ + unsigned int i; + u32 crc, crc_offset = offsetof(struct eeprom, crc); + u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */ + + puts("EEPROM: "); + + if (read_eeprom()) { + printf("Read failed.\n"); + return 0; + } + + if (!is_valid) { + printf("Invalid ID (%02x %02x %02x %02x)\n", + e.id[0], e.id[1], e.id[2], e.id[3]); + return 0; + } + + crc = crc32(0, (void *)&e, crc_offset); + crcp = (void *)&e + crc_offset; + if (crc != be32_to_cpu(*crcp)) { + printf("CRC mismatch (%08x != %08x)\n", crc, + be32_to_cpu(e.crc)); + return 0; + } + + /* + * MAC address #9 in v1 occupies the same position as the CRC in v0. + * Erase it so that it's not mistaken for a MAC address. We'll + * update the CRC later. + */ + if (e.version == 0) + memset(e.mac[8], 0xff, 6); + + for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) { + if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) && + memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) { + char ethaddr[18]; + char enetvar[9]; + + sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", + e.mac[i][0], + e.mac[i][1], + e.mac[i][2], + e.mac[i][3], + e.mac[i][4], + e.mac[i][5]); + sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i); + /* Only initialize environment variables that are blank + * (i.e. have not yet been set) + */ + if (!getenv(enetvar)) + setenv(enetvar, ethaddr); + } + } + + printf("%c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], + be32_to_cpu(e.version)); + + return 0; +} |