summaryrefslogtreecommitdiff
path: root/board/toradex
diff options
context:
space:
mode:
authorTom Rini <trini@konsulko.com>2016-10-07 22:02:10 -0400
committerTom Rini <trini@konsulko.com>2016-10-08 09:33:37 -0400
commitf5fd45ff64e28a73499548358e3d1ceda0de7daf (patch)
treeec595a705a2ec1f256c5c83b4e4ee7427aec58f4 /board/toradex
parent1f957708072e153637718497f7a1a6e364220337 (diff)
parent3dddc793e0114eb7dfc68b98a4316644d4031fcb (diff)
downloadu-boot-imx-f5fd45ff64e28a73499548358e3d1ceda0de7daf.zip
u-boot-imx-f5fd45ff64e28a73499548358e3d1ceda0de7daf.tar.gz
u-boot-imx-f5fd45ff64e28a73499548358e3d1ceda0de7daf.tar.bz2
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Diffstat (limited to 'board/toradex')
-rw-r--r--board/toradex/colibri_imx7/colibri_imx7.c92
1 files changed, 42 insertions, 50 deletions
diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c
index 8eedd65..c64e31e 100644
--- a/board/toradex/colibri_imx7/colibri_imx7.c
+++ b/board/toradex/colibri_imx7/colibri_imx7.c
@@ -12,17 +12,17 @@
#include <asm/gpio.h>
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/iomux-v3.h>
-#include <asm/imx-common/mxc_i2c.h>
#include <asm/io.h>
#include <common.h>
#include <dm.h>
#include <dm/platform_data/serial_mxc.h>
#include <fsl_esdhc.h>
-#include <i2c.h>
#include <linux/sizes.h>
#include <mmc.h>
#include <miiphy.h>
#include <netdev.h>
+#include <power/pmic.h>
+#include <power/rn5t567_pmic.h>
#include <usb/ehci-ci.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -38,9 +38,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM)
-#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
- PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
-
#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
PAD_CTL_DSE_3P3V_49OHM)
@@ -48,36 +45,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM)
-#ifdef CONFIG_SYS_I2C_MXC
-#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
-/* I2C1 for PMIC */
-static struct i2c_pads_info i2c_pad_info1 = {
- .scl = {
- .i2c_mode = MX7D_PAD_GPIO1_IO04__I2C1_SCL | PC,
- .gpio_mode = MX7D_PAD_GPIO1_IO04__GPIO1_IO4 | PC,
- .gp = IMX_GPIO_NR(1, 4),
- },
- .sda = {
- .i2c_mode = MX7D_PAD_GPIO1_IO05__I2C1_SDA | PC,
- .gpio_mode = MX7D_PAD_GPIO1_IO05__GPIO1_IO5 | PC,
- .gp = IMX_GPIO_NR(1, 5),
- },
-};
-/* I2C4 for Colibri I2C */
-static struct i2c_pads_info i2c_pad_info4 = {
- .scl = {
- .i2c_mode = MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL | PC,
- .gpio_mode = MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8 | PC,
- .gp = IMX_GPIO_NR(7, 8),
- },
- .sda = {
- .i2c_mode = MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA | PC,
- .gpio_mode = MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 | PC,
- .gp = IMX_GPIO_NR(7, 9),
- },
-};
-#endif
-
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -331,11 +298,6 @@ int board_early_init_f(void)
{
setup_iomux_uart();
-#ifdef CONFIG_SYS_I2C_MXC
- setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
- setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info4);
-#endif
-
return 0;
}
@@ -377,6 +339,46 @@ int board_late_init(void)
return 0;
}
+#ifdef CONFIG_DM_PMIC
+int power_init_board(void)
+{
+ struct udevice *dev;
+ int reg, ver;
+ int ret;
+
+
+ ret = pmic_get("rn5t567", &dev);
+ if (ret)
+ return ret;
+ ver = pmic_reg_read(dev, RN5T567_LSIVER);
+ reg = pmic_reg_read(dev, RN5T567_OTPVER);
+
+ printf("PMIC: RN5T567 LSIVER=0x%02x OTPVER=0x%02x\n", ver, reg);
+
+ /* set judge and press timer of N_OE to minimal values */
+ pmic_clrsetbits(dev, RN5T567_NOETIMSETCNT, 0x7, 0);
+
+ return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+ struct udevice *dev;
+
+ pmic_get("rn5t567", &dev);
+
+ /* Use PMIC to reset, set REPWRTIM to 0 and REPWRON to 1 */
+ pmic_reg_write(dev, RN5T567_REPCNT, 0x1);
+ pmic_reg_write(dev, RN5T567_SLPCNT, 0x1);
+
+ /*
+ * Re-power factor detection on PMIC side is not instant. 1ms
+ * proved to be enough time until reset takes effect.
+ */
+ mdelay(1);
+}
+#endif
+
int checkboard(void)
{
printf("Model: Toradex Colibri iMX7%c\n",
@@ -408,13 +410,3 @@ int board_ehci_hcd_init(int port)
return 0;
}
#endif
-
-static struct mxc_serial_platdata mxc_serial_plat = {
- .reg = (struct mxc_uart *)UART1_IPS_BASE_ADDR,
- .use_dte = true,
-};
-
-U_BOOT_DEVICE(mxc_serial) = {
- .name = "serial_mxc",
- .platdata = &mxc_serial_plat,
-};