board: ti: amx3xx: Remove multiple EEPROM reads

Detect the board very early and avoid reading eeprom multiple times.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

2 files changed, 13 insertions, 34 deletions

diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index fc1353a..da9eab4 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -64,10 +64,16 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 /*
  * Read header information from EEPROM into global structure.
  */
-static inline int __maybe_unused read_eeprom(void)
+#ifdef CONFIG_TI_I2C_BOARD_DETECT
+void do_board_detect(void)
 {
-	return ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR);
+	enable_i2c0_pin_mux();
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+
+	if (ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR))
+		printf("ti_i2c_eeprom_init failed\n");
 }
+#endif
 
 #ifndef CONFIG_DM_SERIAL
 struct serial_device *default_serial_console(void)
@@ -248,9 +254,6 @@ void am33xx_spl_board_init(void)
 {
 	int mpu_vdd;
 
-	if (read_eeprom() < 0)
-		puts("Could not get board ID.\n");
-
 	/* Get the frequency */
 	dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
 
@@ -388,11 +391,6 @@ void am33xx_spl_board_init(void)
 
 const struct dpll_params *get_dpll_ddr_params(void)
 {
-	enable_i2c0_pin_mux();
-	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
-	if (read_eeprom() < 0)
-		puts("Could not get board ID.\n");
-
 	if (board_is_evm_sk())
 		return &dpll_ddr_evm_sk;
 	else if (board_is_bone_lt() || board_is_icev2())
@@ -422,9 +420,6 @@ void set_uart_mux_conf(void)
 
 void set_mux_conf_regs(void)
 {
-	if (read_eeprom() < 0)
-		puts("Could not get board ID.\n");
-
 	enable_board_pin_mux();
 }
 
@@ -462,9 +457,6 @@ const struct ctrl_ioregs ioregs = {
 
 void sdram_init(void)
 {
-	if (read_eeprom() < 0)
-		puts("Could not get board ID.\n");
-
 	if (board_is_evm_sk()) {
 		/*
 		 * EVM SK 1.2A and later use gpio0_7 to enable DDR3.
@@ -642,13 +634,8 @@ int board_late_init(void)
 #endif
 
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-	int rc;
 	char *name = NULL;
 
-	rc = read_eeprom();
-	if (rc)
-		puts("Could not get board ID.\n");
-
 	if (board_is_bbg1())
 		name = "BBG1";
 	set_board_info_env(name);
@@ -779,9 +766,6 @@ int board_eth_init(bd_t *bis)
 	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
 
 #ifdef CONFIG_DRIVER_TI_CPSW
-	if (read_eeprom() < 0)
-		puts("Could not get board ID.\n");
-
 	if (board_is_bone() || board_is_bone_lt() ||
 	    board_is_idk()) {
 		writel(MII_MODE_ENABLE, &cdev->miisel);
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index f04a06e..ba6f88f 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -39,10 +39,13 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 /*
  * Read header information from EEPROM into global structure.
  */
-static inline int __maybe_unused read_eeprom(void)
+#ifdef CONFIG_TI_I2C_BOARD_DETECT
+void do_board_detect(void)
 {
-	return ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR);
+	if (ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR))
+		printf("ti_i2c_eeprom_init failed\n");
 }
+#endif
 
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 
@@ -337,9 +340,6 @@ const struct dpll_params *get_dpll_ddr_params(void)
 {
 	int ind = get_sys_clk_index();
 
-	if (read_eeprom() < 0)
-		return NULL;
-
 	if (board_is_eposevm())
 		return &epos_evm_dpll_ddr[ind];
 	else if (board_is_evm() || board_is_sk())
@@ -495,9 +495,6 @@ void scale_vcores(void)
 {
 	const struct dpll_params *mpu_params;
 
-	if (read_eeprom() < 0)
-		puts("Could not get board ID.\n");
-
 	/* Ensure I2C is initialized for PMIC configuration */
 	gpi2c_init();
 
@@ -537,8 +534,6 @@ static void enable_vtt_regulator(void)
 
 void sdram_init(void)
 {
-	if (read_eeprom() < 0)
-		return;
 	/*
 	 * EPOS EVM has 1GB LPDDR2 connected to EMIF.
 	 * GP EMV has 1GB DDR3 connected to EMIF