diff options
| author | Govindraj.R <govindraj.raja@ti.com> | 2012-02-06 03:55:34 +0000 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-02-12 10:11:31 +0100 |
| commit | 43b62393da6dfdd7f503d1b37344463a05ea47b5 (patch) | |
| tree | 31e528357b55cc7b130c1e9c0d15e46238c49c06 /board/ti/panda | |
| parent | 29321c0518d99494ab2a250e5b4f75b3add83b11 (diff) | |
| download | u-boot-imx-43b62393da6dfdd7f503d1b37344463a05ea47b5.zip u-boot-imx-43b62393da6dfdd7f503d1b37344463a05ea47b5.tar.gz u-boot-imx-43b62393da6dfdd7f503d1b37344463a05ea47b5.tar.bz2 | |
ehci-omap: Clean up added ehci-omap.c
Clean up added ehci-omap.c and make it generic for re-use across
omap-soc having same ehci ip block. Also pass the modes to be configured
from board file and configure the ports accordingly. All usb layers
are not cache aligned, till then keep cache off for usb ops as ehci will use
internally dma for all usb ops.
* Add a generic common header ehci-omap.h having common ip block
data and reg shifts.
* Rename and modify ehci-omap3 to ehci.h retain only conflicting
sysc reg shifts remove others and move to common header file.
* pass the board data for beagle/panda accordinly to use
ehci ports.
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Diffstat (limited to 'board/ti/panda')
| -rw-r--r-- | board/ti/panda/panda.c | 38 |
1 files changed, 38 insertions, 0 deletions
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index fc8c0b4..ca4b8b3 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -26,9 +26,16 @@ #include <asm/arch/mmc_host_def.h> #include <asm/arch/clocks.h> #include <asm/arch/gpio.h> +#include <asm/gpio.h> #include "panda_mux_data.h" +#ifdef CONFIG_USB_EHCI +#include <usb.h> +#include <asm/arch/ehci.h> +#include <asm/ehci-omap.h> +#endif + #define PANDA_ULPI_PHY_TYPE_GPIO 182 DECLARE_GLOBAL_DATA_PTR; @@ -177,6 +184,37 @@ int board_mmc_init(bd_t *bis) } #endif +#ifdef CONFIG_USB_EHCI + +static struct omap_usbhs_board_data usbhs_bdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, +}; + +int ehci_hcd_init(void) +{ + int ret; + unsigned int utmi_clk; + + /* Now we can enable our port clocks */ + utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL); + utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK; + sr32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, 0, 32, utmi_clk); + + ret = omap_ehci_hcd_init(&usbhs_bdata); + if (ret < 0) + return ret; + + return 0; +} + +int ehci_hcd_stop(void) +{ + return omap_ehci_hcd_stop(); +} +#endif + /* * get_board_rev() - get board revision */ |