ARM: keystone2: move K2HK board files to common KS2 board directory

This patch moves K2HK board directory to a common Keystone II board
directory. The Board related common functions are moved to a common
keystone board file.

Acked-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hao Zhang <hzhang@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>

6 files changed, 836 insertions, 0 deletions

diff --git a/board/ti/ks2_evm/Makefile b/board/ti/ks2_evm/Makefile
new file mode 100644
index 0000000..58d77dc
--- /dev/null
+++ b/board/ti/ks2_evm/Makefile
@@ -0,0 +1,10 @@
+#
+# KS2-EVM: board Makefile
+# (C) Copyright 2012-2014
+#     Texas Instruments Incorporated, <www.ti.com>
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y += board.o
+obj-$(CONFIG_K2HK_EVM) += board_k2hk.o
+obj-$(CONFIG_K2HK_EVM) += ddr3_k2hk.o
diff --git a/board/ti/ks2_evm/README_K2HK b/board/ti/ks2_evm/README_K2HK
new file mode 100644
index 0000000..7426b8d
--- /dev/null
+++ b/board/ti/ks2_evm/README_K2HK
@@ -0,0 +1,148 @@
+U-Boot port for Texas Instruments XTCIEVMK2X
+============================================
+
+Author: Murali Karicheri <m-karicheri2@ti.com>
+
+This README has information on the u-boot port for XTCIEVMK2X EVM board.
+Documentation for this board can be found at
+  http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
+
+The board is based on Texas Instruments Keystone2 family of SoCs : K2H, K2K.
+More details on these SoCs are available at company websites
+ K2K: http://www.ti.com/product/tci6638k2k
+ K2H: http://www.ti.com/product/tci6638k2h
+
+Board configuration:
+====================
+
+Some of the peripherals that are configured by u-boot are:-
+
+1. 2GB DDR3 (can support 8GB SO DIMM as well)
+2. 512M NAND (over ti emif16 bus)
+3. 6MB MSM SRAM (part of the SoC)
+4. two 1GBit Ethernet ports (SoC supports upto 4)
+5. two UART ports
+6. three i2c interfaces
+7. three spi interfaces (only 1 interface supported in driver)
+
+There are seperate PLLs to drive clocks to Tetris ARM and Peripherals.
+To bring up SMP Linux on this board, there is a boot monitor
+code that will be installed in MSMC SRAM. There is command available
+to install this image from u-boot.
+
+The port related files can be found at following folders
+ keystone2 SoC related files: arch/arm/cpu/armv7/keystone/
+ K2HK evm board files: board/ti/k2hk_evm/
+
+board configuration file: include/configs/k2hk_evm.h
+
+Supported boot modes:
+ - SPI NOR boot
+ - AEMIF NAND boot
+
+Supported image formats:-
+ - u-boot.bin: for loading and running u-boot.bin through Texas instruments
+               code composure studio (CCS)
+ - u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot
+ - u-boot-nand.gph: gpimage for programming AEMIF NAND flash for NAND boot
+
+Build instructions:
+===================
+
+To build u-boot.bin
+  >make k2hk_evm_config
+  >make u-boot-spi.gph
+
+To build u-boot-spi.gph
+  >make k2hk_evm_config
+  >make u-boot-spi.gph
+
+To build u-boot-nand.gph
+  >make k2hk_evm_config
+  >make u-boot-nand.gph
+
+Load and Run U-Boot on K2HK EVM using CCS
+=========================================
+
+Need Code Composer Studio (CCS) installed on a PC to load and run u-boot.bin
+on EVM. See instructions at below link for installing CCS on a Windows PC.
+http://processors.wiki.ti.com/index.php/MCSDK_UG_Chapter_Getting_Started#
+Installing_Code_Composer_Studio
+Use u-boot.bin from the build folder for loading annd running u-boot binary
+on EVM. Follow instructions at
+http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup
+to configure SW1 dip switch to use "No Boot/JTAG DSP Little Endian Boot Mode"
+and Power ON the EVM.  Follow instructions to connect serial port of EVM to
+PC and start TeraTerm or Hyper Terminal.
+
+Start CCS on a Windows machine and Launch Target
+configuration as instructed at http://processors.wiki.ti.com/index.php/
+MCSDK_UG_Chapter_Exploring#Loading_and_Running_U-Boot_on_EVM_through_CCS.
+The instructions provided in the above link uses a script for
+loading the u-boot binary on the target EVM. Instead do the following:-
+
+1. Right click to "Texas Instruments XDS2xx USB Emulator_0/CortexA15_1 core (D
+   isconnected: Unknown)" at the debug window (This is created once Target
+   configuration is launched) and select "Connect Target".
+2. Once target connect is successful, choose Tools->Load Memory option from the
+   top level menu. At the Load Memory window, choose the file u-boot.bin
+   through "Browse" button and click "next >" button. In the next window, enter
+   Start address as 0xc001000, choose Type-size "32 bits" and click "Finish"
+   button.
+3. Click View -> Registers from the top level menu to view registers window.
+4. From Registers, window expand "Core Registers" to view PC. Edit PC value
+   to be 0xc001000. From the "Run" top level menu, select "Free Run"
+5. The U-Boot prompt is shown at the Tera Term/ Hyper terminal console as
+   below and type any key to stop autoboot as instructed :=
+
+U-Boot 2014.04-rc1-00201-gc215b5a (Mar 21 2014 - 12:47:59)
+
+I2C:   ready
+Detected SO-DIMM [SQR-SD3T-2G1333SED]
+DRAM:  1.1 GiB
+NAND:  512 MiB
+Net:   K2HK_EMAC
+Warning: K2HK_EMAC using MAC address from net device
+, K2HK_EMAC1, K2HK_EMAC2, K2HK_EMAC3
+Hit any key to stop autoboot:  0
+
+SPI NOR Flash programming instructions
+======================================
+U-Boot image can be flashed to first 512KB of the NOR flash using following
+instructions:-
+
+1. Start CCS and run U-boot as described above.
+2. Suspend Target. Select Run -> Suspend from top level menu
+   CortexA15_1 (Free Running)"
+3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000
+   through CCS as described in step 2 of "Load and Run U-Boot on K2HK EVM
+   using CCS", but using address 0x87000000.
+4. Free Run the target as desribed earlier (step 4) to get u-boot prompt
+5. At the U-Boot console type following to setup u-boot environment variables.
+   setenv addr_uboot 0x87000000
+   setenv filesize <size in hex of u-boot-spi.gph rounded to hex 0x10000>
+   run burn_uboot_spi
+   Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch
+   to "SPI Little Endian Boot mode" as per instruction at
+   http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup.
+6. Power ON the EVM. The EVM now boots with u-boot image on the NOR flash.
+
+AEMIF NAND Flash programming instructions
+======================================
+U-Boot image can be flashed to first 1024KB of the NAND flash using following
+instructions:-
+
+1. Start CCS and run U-boot as described above.
+2. Suspend Target. Select Run -> Suspend from top level menu
+   CortexA15_1 (Free Running)"
+3. Load u-boot-nand.gph binary from build folder on to DDR address 0x87000000
+   through CCS as described in step 2 of "Load and Run U-Boot on K2HK EVM
+   using CCS", but using address 0x87000000.
+4. Free Run the target as desribed earlier (step 4) to get u-boot prompt
+5. At the U-Boot console type following to setup u-boot environment variables.
+   setenv filesize <size in hex of u-boot-nand.gph rounded to hex 0x10000>
+   run burn_uboot_nand
+   Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch
+   to "ARM NAND Boot mode" as per instruction at
+   http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup.
+6. Power ON the EVM. The EVM now boots with u-boot image on the NAND flash.
diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c
new file mode 100644
index 0000000..dfe7be6
--- /dev/null
+++ b/board/ti/ks2_evm/board.c
@@ -0,0 +1,229 @@
+/*
+ * Keystone : Board initialization
+ *
+ * (C) Copyright 2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include "board.h"
+#include <common.h>
+#include <exports.h>
+#include <fdt_support.h>
+#include <asm/arch/ddr3.h>
+#include <asm/arch/emac_defs.h>
+#include <asm/ti-common/ti-aemif.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct aemif_config aemif_configs[] = {
+	{			/* CS0 */
+		.mode		= AEMIF_MODE_NAND,
+		.wr_setup	= 0xf,
+		.wr_strobe	= 0x3f,
+		.wr_hold	= 7,
+		.rd_setup	= 0xf,
+		.rd_strobe	= 0x3f,
+		.rd_hold	= 7,
+		.turn_around	= 3,
+		.width		= AEMIF_WIDTH_8,
+	},
+};
+
+int dram_init(void)
+{
+	ddr3_init();
+
+	gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+				    CONFIG_MAX_RAM_BANK_SIZE);
+	aemif_init(ARRAY_SIZE(aemif_configs), aemif_configs);
+	return 0;
+}
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = CONFIG_LINUX_BOOT_PARAM_ADDR;
+
+	return 0;
+}
+
+#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
+int get_eth_env_param(char *env_name)
+{
+	char *env;
+	int res = -1;
+
+	env = getenv(env_name);
+	if (env)
+		res = simple_strtol(env, NULL, 0);
+
+	return res;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int j;
+	int res;
+	int port_num;
+	char link_type_name[32];
+
+	port_num = get_num_eth_ports();
+
+	for (j = 0; j < port_num; j++) {
+		sprintf(link_type_name, "sgmii%d_link_type", j);
+		res = get_eth_env_param(link_type_name);
+		if (res >= 0)
+			eth_priv_cfg[j].sgmii_link_type = res;
+
+		keystone2_emac_initialize(&eth_priv_cfg[j]);
+	}
+
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	int lpae;
+	char *env;
+	char *endp;
+	int nbanks;
+	u64 size[2];
+	u64 start[2];
+	char name[32];
+	int nodeoffset;
+	u32 ddr3a_size;
+	int unitrd_fixup = 0;
+
+	env = getenv("mem_lpae");
+	lpae = env && simple_strtol(env, NULL, 0);
+	env = getenv("uinitrd_fixup");
+	unitrd_fixup = env && simple_strtol(env, NULL, 0);
+
+	ddr3a_size = 0;
+	if (lpae) {
+		env = getenv("ddr3a_size");
+		if (env)
+			ddr3a_size = simple_strtol(env, NULL, 10);
+		if ((ddr3a_size != 8) && (ddr3a_size != 4))
+			ddr3a_size = 0;
+	}
+
+	nbanks = 1;
+	start[0] = bd->bi_dram[0].start;
+	size[0]  = bd->bi_dram[0].size;
+
+	/* adjust memory start address for LPAE */
+	if (lpae) {
+		start[0] -= CONFIG_SYS_SDRAM_BASE;
+		start[0] += CONFIG_SYS_LPAE_SDRAM_BASE;
+	}
+
+	if ((size[0] == 0x80000000) && (ddr3a_size != 0)) {
+		size[1] = ((u64)ddr3a_size - 2) << 30;
+		start[1] = 0x880000000;
+		nbanks++;
+	}
+
+	/* reserve memory at start of bank */
+	sprintf(name, "mem_reserve_head");
+	env = getenv(name);
+	if (env) {
+		start[0] += ustrtoul(env, &endp, 0);
+		size[0] -= ustrtoul(env, &endp, 0);
+	}
+
+	sprintf(name, "mem_reserve");
+	env = getenv(name);
+	if (env)
+		size[0] -= ustrtoul(env, &endp, 0);
+
+	fdt_fixup_memory_banks(blob, start, size, nbanks);
+
+	/* Fix up the initrd */
+	if (lpae && unitrd_fixup) {
+		int err;
+		u32 *prop1, *prop2;
+		u64 initrd_start, initrd_end;
+
+		nodeoffset = fdt_path_offset(blob, "/chosen");
+		if (nodeoffset >= 0) {
+			prop1 = (u32 *)fdt_getprop(blob, nodeoffset,
+					    "linux,initrd-start", NULL);
+			prop2 = (u32 *)fdt_getprop(blob, nodeoffset,
+					    "linux,initrd-end", NULL);
+			if (prop1 && prop2) {
+				initrd_start = __be32_to_cpu(*prop1);
+				initrd_start -= CONFIG_SYS_SDRAM_BASE;
+				initrd_start += CONFIG_SYS_LPAE_SDRAM_BASE;
+				initrd_start = __cpu_to_be64(initrd_start);
+				initrd_end = __be32_to_cpu(*prop2);
+				initrd_end -= CONFIG_SYS_SDRAM_BASE;
+				initrd_end += CONFIG_SYS_LPAE_SDRAM_BASE;
+				initrd_end = __cpu_to_be64(initrd_end);
+
+				err = fdt_delprop(blob, nodeoffset,
+						  "linux,initrd-start");
+				if (err < 0)
+					puts("error deleting initrd-start\n");
+
+				err = fdt_delprop(blob, nodeoffset,
+						  "linux,initrd-end");
+				if (err < 0)
+					puts("error deleting initrd-end\n");
+
+				err = fdt_setprop(blob, nodeoffset,
+						  "linux,initrd-start",
+						  &initrd_start,
+						  sizeof(initrd_start));
+				if (err < 0)
+					puts("error adding initrd-start\n");
+
+				err = fdt_setprop(blob, nodeoffset,
+						  "linux,initrd-end",
+						  &initrd_end,
+						  sizeof(initrd_end));
+				if (err < 0)
+					puts("error adding linux,initrd-end\n");
+			}
+		}
+	}
+}
+
+void ft_board_setup_ex(void *blob, bd_t *bd)
+{
+	int lpae;
+	u64 size;
+	char *env;
+	u64 *reserve_start;
+
+	env = getenv("mem_lpae");
+	lpae = env && simple_strtol(env, NULL, 0);
+
+	if (lpae) {
+		/*
+		 * the initrd and other reserved memory areas are
+		 * embedded in in the DTB itslef. fix up these addresses
+		 * to 36 bit format
+		 */
+		reserve_start = (u64 *)((char *)blob +
+				       fdt_off_mem_rsvmap(blob));
+		while (1) {
+			*reserve_start = __cpu_to_be64(*reserve_start);
+			size = __cpu_to_be64(*(reserve_start + 1));
+			if (size) {
+				*reserve_start -= CONFIG_SYS_SDRAM_BASE;
+				*reserve_start +=
+					CONFIG_SYS_LPAE_SDRAM_BASE;
+				*reserve_start =
+					__cpu_to_be64(*reserve_start);
+			} else {
+				break;
+			}
+			reserve_start += 2;
+		}
+	}
+}
+#endif
diff --git a/board/ti/ks2_evm/board.h b/board/ti/ks2_evm/board.h
new file mode 100644
index 0000000..d91ef73
--- /dev/null
+++ b/board/ti/ks2_evm/board.h
@@ -0,0 +1,19 @@
+/*
+ * K2HK EVM : Board common header
+ *
+ * (C) Copyright 2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _KS2_BOARD
+#define _KS2_BOARD
+
+#include <asm/arch/emac_defs.h>
+
+extern struct eth_priv_t eth_priv_cfg[];
+
+int get_num_eth_ports(void);
+
+#endif
diff --git a/board/ti/ks2_evm/board_k2hk.c b/board/ti/ks2_evm/board_k2hk.c
new file mode 100644
index 0000000..a369d6b
--- /dev/null
+++ b/board/ti/ks2_evm/board_k2hk.c
@@ -0,0 +1,81 @@
+/*
+ * K2HK EVM : Board initialization
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emac_defs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int external_clk[ext_clk_count] = {
+	[sys_clk]	=	122880000,
+	[alt_core_clk]	=	125000000,
+	[pa_clk]	=	122880000,
+	[tetris_clk]	=	125000000,
+	[ddr3a_clk]	=	100000000,
+	[ddr3b_clk]	=	100000000,
+	[mcm_clk]	=	312500000,
+	[pcie_clk]	=	100000000,
+	[sgmii_srio_clk] =	156250000,
+	[xgmii_clk]	=	156250000,
+	[usb_clk]	=	100000000,
+	[rp1_clk]	=	123456789
+};
+
+static struct pll_init_data pll_config[] = {
+	CORE_PLL_1228,
+	PASS_PLL_983,
+	TETRIS_PLL_1200,
+};
+
+#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
+struct eth_priv_t eth_priv_cfg[] = {
+	{
+		.int_name	= "K2HK_EMAC",
+		.rx_flow	= 22,
+		.phy_addr	= 0,
+		.slave_port	= 1,
+		.sgmii_link_type = SGMII_LINK_MAC_PHY,
+	},
+	{
+		.int_name	= "K2HK_EMAC1",
+		.rx_flow	= 23,
+		.phy_addr	= 1,
+		.slave_port	= 2,
+		.sgmii_link_type = SGMII_LINK_MAC_PHY,
+	},
+	{
+		.int_name	= "K2HK_EMAC2",
+		.rx_flow	= 24,
+		.phy_addr	= 2,
+		.slave_port	= 3,
+		.sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+	},
+	{
+		.int_name	= "K2HK_EMAC3",
+		.rx_flow	= 25,
+		.phy_addr	= 3,
+		.slave_port	= 4,
+		.sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+	},
+};
+
+int get_num_eth_ports(void)
+{
+	return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t);
+}
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+	init_plls(ARRAY_SIZE(pll_config), pll_config);
+	return 0;
+}
+#endif
diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c
new file mode 100644
index 0000000..31e9c31
--- /dev/null
+++ b/board/ti/ks2_evm/ddr3_k2hk.c
@@ -0,0 +1,349 @@
+/*
+ * Keystone2: DDR3 initialization
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/ddr3.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+#include <i2c.h>
+
+/************************* *****************************/
+static struct ddr3_phy_config ddr3phy_1600_64A = {
+	.pllcr		= 0x0001C000ul,
+	.pgcr1_mask	= (IODDRM_MASK | ZCKSEL_MASK),
+	.pgcr1_val	= ((1 << 2) | (1 << 7) | (1 << 23)),
+	.ptr0		= 0x42C21590ul,
+	.ptr1		= 0xD05612C0ul,
+	.ptr2		= 0, /* not set in gel */
+	.ptr3		= 0x0D861A80ul,
+	.ptr4		= 0x0C827100ul,
+	.dcr_mask	= (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK),
+	.dcr_val	= ((1 << 10) | (1 << 27)),
+	.dtpr0		= 0xA19DBB66ul,
+	.dtpr1		= 0x12868300ul,
+	.dtpr2		= 0x50035200ul,
+	.mr0		= 0x00001C70ul,
+	.mr1		= 0x00000006ul,
+	.mr2		= 0x00000018ul,
+	.dtcr		= 0x730035C7ul,
+	.pgcr2		= 0x00F07A12ul,
+	.zq0cr1		= 0x0000005Dul,
+	.zq1cr1		= 0x0000005Bul,
+	.zq2cr1		= 0x0000005Bul,
+	.pir_v1		= 0x00000033ul,
+	.pir_v2		= 0x0000FF81ul,
+};
+
+static struct ddr3_emif_config ddr3_1600_64 = {
+	.sdcfg		= 0x6200CE6aul,
+	.sdtim1		= 0x16709C55ul,
+	.sdtim2		= 0x00001D4Aul,
+	.sdtim3		= 0x435DFF54ul,
+	.sdtim4		= 0x553F0CFFul,
+	.zqcfg		= 0xF0073200ul,
+	.sdrfc		= 0x00001869ul,
+};
+
+static struct ddr3_phy_config ddr3phy_1600_32 = {
+	.pllcr		= 0x0001C000ul,
+	.pgcr1_mask	= (IODDRM_MASK | ZCKSEL_MASK),
+	.pgcr1_val	= ((1 << 2) | (1 << 7) | (1 << 23)),
+	.ptr0		= 0x42C21590ul,
+	.ptr1		= 0xD05612C0ul,
+	.ptr2		= 0, /* not set in gel */
+	.ptr3		= 0x0D861A80ul,
+	.ptr4		= 0x0C827100ul,
+	.dcr_mask	= (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK),
+	.dcr_val	= ((1 << 10) | (1 << 27)),
+	.dtpr0		= 0xA19DBB66ul,
+	.dtpr1		= 0x12868300ul,
+	.dtpr2		= 0x50035200ul,
+	.mr0		= 0x00001C70ul,
+	.mr1		= 0x00000006ul,
+	.mr2		= 0x00000018ul,
+	.dtcr		= 0x730035C7ul,
+	.pgcr2		= 0x00F07A12ul,
+	.zq0cr1		= 0x0000005Dul,
+	.zq1cr1		= 0x0000005Bul,
+	.zq2cr1		= 0x0000005Bul,
+	.pir_v1		= 0x00000033ul,
+	.pir_v2		= 0x0000FF81ul,
+};
+
+static struct ddr3_emif_config ddr3_1600_32 = {
+	.sdcfg		= 0x6200DE6aul,
+	.sdtim1		= 0x16709C55ul,
+	.sdtim2		= 0x00001D4Aul,
+	.sdtim3		= 0x435DFF54ul,
+	.sdtim4		= 0x553F0CFFul,
+	.zqcfg		= 0x70073200ul,
+	.sdrfc		= 0x00001869ul,
+};
+
+/************************* *****************************/
+static struct ddr3_phy_config ddr3phy_1333_64A = {
+	.pllcr		= 0x0005C000ul,
+	.pgcr1_mask	= (IODDRM_MASK | ZCKSEL_MASK),
+	.pgcr1_val	= ((1 << 2) | (1 << 7) | (1 << 23)),
+	.ptr0		= 0x42C21590ul,
+	.ptr1		= 0xD05612C0ul,
+	.ptr2		= 0, /* not set in gel */
+	.ptr3		= 0x0B4515C2ul,
+	.ptr4		= 0x0A6E08B4ul,
+	.dcr_mask	= (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK |
+			   NOSRA_MASK | UDIMM_MASK),
+	.dcr_val	= ((1 << 10) | (1 << 27) | (1 << 29)),
+	.dtpr0		= 0x8558AA55ul,
+	.dtpr1		= 0x12857280ul,
+	.dtpr2		= 0x5002C200ul,
+	.mr0		= 0x00001A60ul,
+	.mr1		= 0x00000006ul,
+	.mr2		= 0x00000010ul,
+	.dtcr		= 0x710035C7ul,
+	.pgcr2		= 0x00F065B8ul,
+	.zq0cr1		= 0x0000005Dul,
+	.zq1cr1		= 0x0000005Bul,
+	.zq2cr1		= 0x0000005Bul,
+	.pir_v1		= 0x00000033ul,
+	.pir_v2		= 0x0000FF81ul,
+};
+
+static struct ddr3_emif_config ddr3_1333_64 = {
+	.sdcfg		= 0x62008C62ul,
+	.sdtim1		= 0x125C8044ul,
+	.sdtim2		= 0x00001D29ul,
+	.sdtim3		= 0x32CDFF43ul,
+	.sdtim4		= 0x543F0ADFul,
+	.zqcfg		= 0xF0073200ul,
+	.sdrfc		= 0x00001457ul,
+};
+
+static struct ddr3_phy_config ddr3phy_1333_32 = {
+	.pllcr		= 0x0005C000ul,
+	.pgcr1_mask	= (IODDRM_MASK | ZCKSEL_MASK),
+	.pgcr1_val	= ((1 << 2) | (1 << 7) | (1 << 23)),
+	.ptr0		= 0x42C21590ul,
+	.ptr1		= 0xD05612C0ul,
+	.ptr2		= 0, /* not set in gel */
+	.ptr3		= 0x0B4515C2ul,
+	.ptr4		= 0x0A6E08B4ul,
+	.dcr_mask	= (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK |
+			   NOSRA_MASK | UDIMM_MASK),
+	.dcr_val	= ((1 << 10) | (1 << 27) | (1 << 29)),
+	.dtpr0		= 0x8558AA55ul,
+	.dtpr1		= 0x12857280ul,
+	.dtpr2		= 0x5002C200ul,
+	.mr0		= 0x00001A60ul,
+	.mr1		= 0x00000006ul,
+	.mr2		= 0x00000010ul,
+	.dtcr		= 0x710035C7ul,
+	.pgcr2		= 0x00F065B8ul,
+	.zq0cr1		= 0x0000005Dul,
+	.zq1cr1		= 0x0000005Bul,
+	.zq2cr1		= 0x0000005Bul,
+	.pir_v1		= 0x00000033ul,
+	.pir_v2		= 0x0000FF81ul,
+};
+
+static struct ddr3_emif_config ddr3_1333_32 = {
+	.sdcfg		= 0x62009C62ul,
+	.sdtim1		= 0x125C8044ul,
+	.sdtim2		= 0x00001D29ul,
+	.sdtim3		= 0x32CDFF43ul,
+	.sdtim4		= 0x543F0ADFul,
+	.zqcfg		= 0xf0073200ul,
+	.sdrfc		= 0x00001457ul,
+};
+
+/************************* *****************************/
+static struct ddr3_phy_config ddr3phy_1333_64 = {
+	.pllcr		= 0x0005C000ul,
+	.pgcr1_mask	= (IODDRM_MASK | ZCKSEL_MASK),
+	.pgcr1_val	= ((1 << 2) | (1 << 7) | (1 << 23)),
+	.ptr0		= 0x42C21590ul,
+	.ptr1		= 0xD05612C0ul,
+	.ptr2		= 0, /* not set in gel */
+	.ptr3		= 0x0B4515C2ul,
+	.ptr4		= 0x0A6E08B4ul,
+	.dcr_mask	= (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK),
+	.dcr_val	= ((1 << 10) | (1 << 27)),
+	.dtpr0		= 0x8558AA55ul,
+	.dtpr1		= 0x12857280ul,
+	.dtpr2		= 0x5002C200ul,
+	.mr0		= 0x00001A60ul,
+	.mr1		= 0x00000006ul,
+	.mr2		= 0x00000010ul,
+	.dtcr		= 0x710035C7ul,
+	.pgcr2		= 0x00F065B8ul,
+	.zq0cr1		= 0x0000005Dul,
+	.zq1cr1		= 0x0000005Bul,
+	.zq2cr1		= 0x0000005Bul,
+	.pir_v1		= 0x00000033ul,
+	.pir_v2		= 0x0000FF81ul,
+};
+/******************************************************/
+
+/* DDR PHY Configs Updated for PG 2.0
+ * zq0,1,2cr1 are updated for PG 2.0 specific configs *_pg2 */
+static struct ddr3_phy_config ddr3phy_1600_64A_pg2 = {
+	.pllcr          = 0x0001C000ul,
+	.pgcr1_mask     = (IODDRM_MASK | ZCKSEL_MASK),
+	.pgcr1_val      = ((1 << 2) | (1 << 7) | (1 << 23)),
+	.ptr0           = 0x42C21590ul,
+	.ptr1           = 0xD05612C0ul,
+	.ptr2           = 0, /* not set in gel */
+	.ptr3           = 0x0D861A80ul,
+	.ptr4           = 0x0C827100ul,
+	.dcr_mask       = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
+	.dcr_val        = ((1 << 10)),
+	.dtpr0          = 0xA19DBB66ul,
+	.dtpr1          = 0x32868300ul,
+	.dtpr2          = 0x50035200ul,
+	.mr0            = 0x00001C70ul,
+	.mr1            = 0x00000006ul,
+	.mr2            = 0x00000018ul,
+	.dtcr           = 0x730035C7ul,
+	.pgcr2          = 0x00F07A12ul,
+	.zq0cr1         = 0x0001005Dul,
+	.zq1cr1         = 0x0001005Bul,
+	.zq2cr1         = 0x0001005Bul,
+	.pir_v1         = 0x00000033ul,
+	.pir_v2         = 0x0000FF81ul,
+};
+
+static struct ddr3_phy_config ddr3phy_1333_64A_pg2 = {
+	.pllcr          = 0x0005C000ul,
+	.pgcr1_mask     = (IODDRM_MASK | ZCKSEL_MASK),
+	.pgcr1_val      = ((1 << 2) | (1 << 7) | (1 << 23)),
+	.ptr0           = 0x42C21590ul,
+	.ptr1           = 0xD05612C0ul,
+	.ptr2           = 0, /* not set in gel */
+	.ptr3           = 0x0B4515C2ul,
+	.ptr4           = 0x0A6E08B4ul,
+	.dcr_mask       = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
+	.dcr_val        = ((1 << 10)),
+	.dtpr0          = 0x8558AA55ul,
+	.dtpr1          = 0x32857280ul,
+	.dtpr2          = 0x5002C200ul,
+	.mr0            = 0x00001A60ul,
+	.mr1            = 0x00000006ul,
+	.mr2            = 0x00000010ul,
+	.dtcr           = 0x710035C7ul,
+	.pgcr2          = 0x00F065B8ul,
+	.zq0cr1         = 0x0001005Dul,
+	.zq1cr1         = 0x0001005Bul,
+	.zq2cr1         = 0x0001005Bul,
+	.pir_v1         = 0x00000033ul,
+	.pir_v2         = 0x0000FF81ul,
+};
+
+int get_dimm_params(char *dimm_name)
+{
+	u8 spd_params[256];
+	int ret;
+	int old_bus;
+
+	i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE);
+
+	old_bus = i2c_get_bus_num();
+	i2c_set_bus_num(1);
+
+	ret = i2c_read(0x53, 0, 1, spd_params, 256);
+
+	i2c_set_bus_num(old_bus);
+
+	dimm_name[0] = '\0';
+
+	if (ret) {
+		puts("Cannot read DIMM params\n");
+		return 1;
+	}
+
+	/*
+	 * We need to convert spd data to dimm parameters
+	 * and to DDR3 EMIF and PHY regirsters values.
+	 * For now we just return DIMM type string value.
+	 * Caller may use this value to choose appropriate
+	 * a pre-set DDR3 configuration
+	 */
+
+	strncpy(dimm_name, (char *)&spd_params[0x80], 18);
+	dimm_name[18] = '\0';
+
+	return 0;
+}
+
+struct pll_init_data ddr3a_333 = DDR3_PLL_333(A);
+struct pll_init_data ddr3b_333 = DDR3_PLL_333(B);
+struct pll_init_data ddr3a_400 = DDR3_PLL_400(A);
+struct pll_init_data ddr3b_400 = DDR3_PLL_400(B);
+
+void ddr3_init(void)
+{
+	char dimm_name[32];
+
+	get_dimm_params(dimm_name);
+
+	printf("Detected SO-DIMM [%s]\n", dimm_name);
+
+	if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) {
+		init_pll(&ddr3a_400);
+		if (cpu_revision() > 0) {
+			if (cpu_revision() > 1) {
+				/* PG 2.0 */
+				/* Reset DDR3A PHY after PLL enabled */
+				ddr3_reset_ddrphy();
+				ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
+						 &ddr3phy_1600_64A_pg2);
+			} else {
+				/* PG 1.1 */
+				ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
+						 &ddr3phy_1600_64A);
+			}
+
+			ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
+					  &ddr3_1600_64);
+			printf("DRAM:  Capacity 8 GiB (includes reported below)\n");
+		} else {
+			ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_32);
+			ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
+					  &ddr3_1600_32);
+			printf("DRAM:  Capacity 4 GiB (includes reported below)\n");
+		}
+	} else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) {
+		init_pll(&ddr3a_333);
+		if (cpu_revision() > 0) {
+			if (cpu_revision() > 1) {
+				/* PG 2.0 */
+				/* Reset DDR3A PHY after PLL enabled */
+				ddr3_reset_ddrphy();
+				ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
+						 &ddr3phy_1333_64A_pg2);
+			} else {
+				/* PG 1.1 */
+				ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
+						 &ddr3phy_1333_64A);
+			}
+			ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
+					  &ddr3_1333_64);
+		} else {
+			ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_32);
+			ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
+					  &ddr3_1333_32);
+		}
+	} else {
+		printf("Unknown SO-DIMM. Cannot configure DDR3\n");
+		while (1)
+			;
+	}
+
+	init_pll(&ddr3b_333);
+	ddr3_init_ddrphy(KS2_DDR3B_DDRPHYC, &ddr3phy_1333_64);
+	ddr3_init_ddremif(KS2_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64);
+}