summaryrefslogtreecommitdiff
path: root/board/sc520_spunk
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-05-31 18:35:21 +0000
committerwdenk <wdenk>2003-05-31 18:35:21 +0000
commit7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed (patch)
tree5c273df9c5efa7b1b6a4ca88904e48039ef591e8 /board/sc520_spunk
parent3b57fe0a70b903f4db66c558bb9828bc58acf06b (diff)
downloadu-boot-imx-7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed.zip
u-boot-imx-7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed.tar.gz
u-boot-imx-7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed.tar.bz2
* Patch by Marc Singer, 29 May 2003:
Fixed rarp boot method for IA32 and other little-endian CPUs. * Patch by Marc Singer, 28 May 2003: Added port I/O commands. * Patch by Matthew McClintock, 28 May 2003 - cpu/mpc824x/start.S: fix relocation code when booting from RAM - minor patches for utx8245 * Patch by Daniel Engström, 28 May 2003: x86 update * Patch by Dave Ellis, 9 May 2003 + 27 May 2003: add nand flash support to SXNI855T configuration fix/extend nand flash support: - fix 'nand erase' command so does not erase bad blocks - fix 'nand write' command so does not write to bad blocks - fix nand_probe() so handles no flash detected properly - add doc/README.nand - add .jffs2 and .oob options to nand read/write - add 'nand bad' command to list bad blocks - add 'clean' option to 'nand erase' to write JFFS2 clean markers - make NAND read/write faster * Patch by Rune Torgersen, 23 May 2003: Update for MPC8266ADS board
Diffstat (limited to 'board/sc520_spunk')
-rw-r--r--board/sc520_spunk/Makefile47
-rw-r--r--board/sc520_spunk/config.mk25
-rw-r--r--board/sc520_spunk/flash.c813
-rw-r--r--board/sc520_spunk/sc520_spunk.c686
-rw-r--r--board/sc520_spunk/sc520_spunk_asm.S82
-rw-r--r--board/sc520_spunk/sc520_spunk_asm16.S84
-rw-r--r--board/sc520_spunk/u-boot.lds85
7 files changed, 1822 insertions, 0 deletions
diff --git a/board/sc520_spunk/Makefile b/board/sc520_spunk/Makefile
new file mode 100644
index 0000000..53217c3
--- /dev/null
+++ b/board/sc520_spunk/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2002
+# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := sc520_spunk.o flash.o
+SOBJS := sc520_spunk_asm.o sc520_spunk_asm16.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/sc520_spunk/config.mk b/board/sc520_spunk/config.mk
new file mode 100644
index 0000000..2253815
--- /dev/null
+++ b/board/sc520_spunk/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2002
+# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+
+TEXT_BASE = 0x387c0000
diff --git a/board/sc520_spunk/flash.c b/board/sc520_spunk/flash.c
new file mode 100644
index 0000000..66ef720
--- /dev/null
+++ b/board/sc520_spunk/flash.c
@@ -0,0 +1,813 @@
+/*
+ * (C) Copyright 2002, 2003
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <asm/ic/sc520.h>
+
+#define PROBE_BUFFER_SIZE 1024
+static unsigned char buffer[PROBE_BUFFER_SIZE];
+
+
+#define SC520_MAX_FLASH_BANKS 1
+#define SC520_FLASH_BANK0_BASE 0x38000000 /* BOOTCS */
+#define SC520_FLASH_BANKSIZE 0x8000000
+
+#define A29LV641DH_SIZE 0x800000
+#define A29LV641DH_SECTORS 128
+
+#define A29LV641MH_SIZE 0x800000
+#define A29LV641MH_SECTORS 128
+
+#define I28F320J3A_SIZE 0x400000
+#define I28F320J3A_SECTORS 32
+
+#define I28F640J3A_SIZE 0x800000
+#define I28F640J3A_SECTORS 64
+
+#define I28F128J3A_SIZE 0x1000000
+#define I28F128J3A_SECTORS 128
+
+flash_info_t flash_info[SC520_MAX_FLASH_BANKS];
+
+#define READY 1
+#define ERR 2
+#define TMO 4
+
+/*-----------------------------------------------------------------------
+ */
+
+
+static u32 _probe_flash(u32 addr, u32 bw, int il)
+{
+ u32 result=0;
+
+ /* First do an unlock cycle for the benefit of
+ * devices that need it */
+
+ switch (bw) {
+
+ case 1:
+ *(volatile u8*)(addr+0x5555) = 0xaa;
+ *(volatile u8*)(addr+0x2aaa) = 0x55;
+ *(volatile u8*)(addr+0x5555) = 0x90;
+
+ /* Read vendor */
+ result = *(volatile u8*)addr;
+ result <<= 16;
+
+ /* Read device */
+ result |= *(volatile u8*)(addr+2);
+
+ /* Return device to data mode */
+ *(volatile u8*)addr = 0xff;
+ *(volatile u8*)(addr+0x5555), 0xf0;
+ break;
+
+ case 2:
+ *(volatile u16*)(addr+0xaaaa) = 0xaaaa;
+ *(volatile u16*)(addr+0x5554) = 0x5555;
+
+ /* Issue identification command */
+ if (il == 2) {
+ *(volatile u16*)(addr+0xaaaa) = 0x9090;
+
+ /* Read vendor */
+ result = *(volatile u8*)addr;
+ result <<= 16;
+
+ /* Read device */
+ result |= *(volatile u8*)(addr+2);
+
+ /* Return device to data mode */
+ *(volatile u16*)addr = 0xffff;
+ *(volatile u16*)(addr+0xaaaa), 0xf0f0;
+
+ } else {
+ *(volatile u8*)(addr+0xaaaa) = 0x90;
+ /* Read vendor */
+ result = *(volatile u16*)addr;
+ result <<= 16;
+
+ /* Read device */
+ result |= *(volatile u16*)(addr+2);
+
+ /* Return device to data mode */
+ *(volatile u8*)addr = 0xff;
+ *(volatile u8*)(addr+0xaaaa), 0xf0;
+ }
+
+ break;
+
+ case 4:
+ *(volatile u32*)(addr+0x5554) = 0xaaaaaaaa;
+ *(volatile u32*)(addr+0xaaa8) = 0x55555555;
+
+ switch (il) {
+ case 1:
+ /* Issue identification command */
+ *(volatile u8*)(addr+0x5554) = 0x90;
+
+ /* Read vendor */
+ result = *(volatile u16*)addr;
+ result <<= 16;
+
+ /* Read device */
+ result |= *(volatile u16*)(addr+4);
+
+ /* Return device to data mode */
+ *(volatile u8*)addr = 0xff;
+ *(volatile u8*)(addr+0x5554), 0xf0;
+ break;
+
+ case 2:
+ /* Issue identification command */
+ *(volatile u32*)(addr + 0x5554) = 0x00900090;
+
+ /* Read vendor */
+ result = *(volatile u16*)addr;
+ result <<= 16;
+
+ /* Read device */
+ result |= *(volatile u16*)(addr+4);
+
+ /* Return device to data mode */
+ *(volatile u32*)addr = 0x00ff00ff;
+ *(volatile u32*)(addr+0x5554), 0x00f000f0;
+ break;
+
+ case 4:
+ /* Issue identification command */
+ *(volatile u32*)(addr+0x5554) = 0x90909090;
+
+ /* Read vendor */
+ result = *(volatile u8*)addr;
+ result <<= 16;
+
+ /* Read device */
+ result |= *(volatile u8*)(addr+4);
+
+ /* Return device to data mode */
+ *(volatile u32*)addr = 0xffffffff;
+ *(volatile u32*)(addr+0x5554), 0xf0f0f0f0;
+ break;
+ }
+ break;
+ }
+
+
+
+ return result;
+}
+
+extern int _probe_flash_end;
+asm ("_probe_flash_end:\n"
+ ".long 0\n");
+
+static int identify_flash(unsigned address, int width)
+{
+ int is;
+ int device;
+ int vendor;
+ int size;
+ unsigned res;
+
+ u32 (*_probe_flash_ptr)(u32 a, u32 bw, int il);
+
+ size = (unsigned)&_probe_flash_end - (unsigned)_probe_flash;
+
+ if (size > PROBE_BUFFER_SIZE) {
+ printf("_probe_flash() routine too large (%d) %p - %p\n",
+ size, &_probe_flash_end, _probe_flash);
+ return 0;
+ }
+
+ memcpy(buffer, _probe_flash, size);
+ _probe_flash_ptr = (void*)buffer;
+
+ is = disable_interrupts();
+ res = _probe_flash_ptr(address, width, 1);
+ if (is) {
+ enable_interrupts();
+ }
+
+
+ vendor = res >> 16;
+ device = res & 0xffff;
+
+
+ return res;
+}
+
+ulong flash_init(void)
+{
+ int i, j;
+ ulong size = 0;
+
+ for (i = 0; i < SC520_MAX_FLASH_BANKS; i++) {
+ unsigned id;
+ ulong flashbase = 0;
+ int sectsize = 0;
+
+ memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ switch (i) {
+ case 0:
+ flashbase = SC520_FLASH_BANK0_BASE;
+ break;
+ default:
+ panic("configured to many flash banks!\n");
+ }
+
+ id = identify_flash(flashbase, 2);
+ switch (id) {
+ case 0x000122d7:
+ /* 29LV641DH */
+ flash_info[i].flash_id =
+ (AMD_MANUFACT & FLASH_VENDMASK) |
+ (AMD_ID_LV640U & FLASH_TYPEMASK);
+
+ flash_info[i].size = A29LV641DH_SIZE;
+ flash_info[i].sector_count = A29LV641DH_SECTORS;
+ sectsize = A29LV641DH_SIZE/A29LV641DH_SECTORS;
+ printf("Bank %d: AMD 29LV641DH\n", i);
+ break;
+
+ case 0x0001227E:
+ /* 29LV641MH */
+ flash_info[i].flash_id =
+ (AMD_MANUFACT & FLASH_VENDMASK) |
+ (AMD_ID_DL640 & FLASH_TYPEMASK);
+
+ flash_info[i].size = A29LV641MH_SIZE;
+ flash_info[i].sector_count = A29LV641MH_SECTORS;
+ sectsize = A29LV641MH_SIZE/A29LV641MH_SECTORS;
+ printf("Bank %d: AMD 29LV641MH\n", i);
+ break;
+
+ case 0x00890016:
+ /* 28F320J3A */
+ flash_info[i].flash_id =
+ (INTEL_MANUFACT & FLASH_VENDMASK) |
+ (INTEL_ID_28F320J3A & FLASH_TYPEMASK);
+
+ flash_info[i].size = I28F320J3A_SIZE;
+ flash_info[i].sector_count = I28F320J3A_SECTORS;
+ sectsize = I28F320J3A_SIZE/I28F320J3A_SECTORS;
+ printf("Bank %d: Intel 28F320J3A\n", i);
+ break;
+
+ case 0x00890017:
+ /* 28F640J3A */
+ flash_info[i].flash_id =
+ (INTEL_MANUFACT & FLASH_VENDMASK) |
+ (INTEL_ID_28F640J3A & FLASH_TYPEMASK);
+
+ flash_info[i].size = I28F640J3A_SIZE;
+ flash_info[i].sector_count = I28F640J3A_SECTORS;
+ sectsize = I28F640J3A_SIZE/I28F640J3A_SECTORS;
+ printf("Bank %d: Intel 28F640J3A\n", i);
+ break;
+
+ case 0x00890018:
+ /* 28F128J3A */
+ flash_info[i].flash_id =
+ (INTEL_MANUFACT & FLASH_VENDMASK) |
+ (INTEL_ID_28F128J3A & FLASH_TYPEMASK);
+
+ flash_info[i].size = I28F128J3A_SIZE;
+ flash_info[i].sector_count = I28F128J3A_SECTORS;
+ sectsize = I28F128J3A_SIZE/I28F128J3A_SECTORS;
+ printf("Bank %d: Intel 28F128J3A\n", i);
+ break;
+
+ default:
+ printf("Bank %d have unknown flash %08x\n", i, id);
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ continue;
+ }
+
+ for (j = 0; j < flash_info[i].sector_count; j++) {
+ flash_info[i].start[j] = flashbase + j * sectsize;
+ }
+ size += flash_info[i].size;
+
+ flash_protect(FLAG_PROTECT_CLEAR,
+ flash_info[i].start[0],
+ flash_info[i].start[0] + flash_info[i].size - 1,
+ &flash_info[i]);
+ }
+
+ /*
+ * Protect monitor and environment sectors
+ */
+ flash_protect(FLAG_PROTECT_SET,
+ i386boot_start,
+ i386boot_end,
+ &flash_info[0]);
+#ifdef CFG_ENV_ADDR
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+#endif
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info(flash_info_t *info)
+{
+ int i;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case (INTEL_MANUFACT & FLASH_VENDMASK):
+ printf("INTEL: ");
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (INTEL_ID_28F320J3A & FLASH_TYPEMASK):
+ printf("1x I28F320J3A (32Mbit)\n");
+ break;
+ case (INTEL_ID_28F640J3A & FLASH_TYPEMASK):
+ printf("1x I28F640J3A (64Mbit)\n");
+ break;
+ case (INTEL_ID_28F128J3A & FLASH_TYPEMASK):
+ printf("1x I28F128J3A (128Mbit)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ goto done;
+ break;
+ }
+
+ break;
+
+ case (AMD_MANUFACT & FLASH_VENDMASK):
+ printf("AMD: ");
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (AMD_ID_LV640U & FLASH_TYPEMASK):
+ printf("1x AMD29LV641DH (64Mbit)\n");
+ break;
+ case (AMD_ID_DL640 & FLASH_TYPEMASK):
+ printf("1x AMD29LV641MH (64Mbit)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ goto done;
+ break;
+ }
+
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+
+ printf(" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+
+ done:
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+static u32 _amd_erase_flash(u32 addr, u32 sector)
+{
+ unsigned elapsed;
+
+ /* Issue erase */
+ *(volatile u16*)(addr + 0xaaaa) = 0x00AA;
+ *(volatile u16*)(addr + 0x5554) = 0x0055;
+ *(volatile u16*)(addr + 0xaaaa) = 0x0080;
+ /* And one unlock */
+ *(volatile u16*)(addr + 0xaaaa) = 0x00AA;
+ *(volatile u16*)(addr + 0x5554) = 0x0055;
+ /* Sector erase command comes last */
+ *(volatile u16*)(addr + sector) = 0x0030;
+
+ elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */
+ elapsed = 0;
+ while (((*(volatile u16*)(addr + sector)) & 0x0080) != 0x0080) {
+
+ elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
+ if (elapsed > ((CFG_FLASH_ERASE_TOUT/CFG_HZ) * 1000)) {
+ *(volatile u16*)(addr) = 0x00f0;
+ return 1;
+ }
+ }
+
+ *(volatile u16*)(addr) = 0x00f0;
+
+ return 0;
+}
+
+extern int _amd_erase_flash_end;
+asm ("_amd_erase_flash_end:\n"
+ ".long 0\n");
+
+/* this needs to be inlined, the SWTMRMMILLI register is reset by each read */
+#define __udelay(delay) \
+{ \
+ unsigned micro; \
+ unsigned milli=0; \
+ \
+ micro = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \
+ \
+ for (;;) { \
+ \
+ milli += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \
+ micro = *(volatile u16*)(0xfffef000+SC520_SWTMRMICRO); \
+ \
+ if ((delay) <= (micro + (milli * 1000))) { \
+ break; \
+ } \
+ } \
+} while (0)
+
+static u32 _intel_erase_flash(u32 addr, u32 sector)
+{
+ unsigned elapsed;
+
+ *(volatile u16*)(addr + sector) = 0x0050; /* clear status register */
+ *(volatile u16*)(addr + sector) = 0x0020; /* erase setup */
+ *(volatile u16*)(addr + sector) = 0x00D0; /* erase confirm */
+
+
+ /* Wait at least 80us - let's wait 1 ms */
+ __udelay(1000);
+
+ elapsed = 0;
+ while (((*(volatile u16*)(addr + sector)) & 0x0080) != 0x0080) {
+ elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
+ if (elapsed > ((CFG_FLASH_ERASE_TOUT/CFG_HZ) * 1000)) {
+ *(volatile u16*)(addr + sector) = 0x00B0; /* suspend erase */
+ *(volatile u16*)(addr + sector) = 0x00FF; /* reset to read mode */
+ return 1;
+ }
+ }
+
+ *(volatile u16*)(addr + sector) = 0x00FF; /* reset to read mode */
+
+ return 0;
+}
+
+
+extern int _intel_erase_flash_end;
+asm ("_intel_erase_flash_end:\n"
+ ".long 0\n");
+
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+ u32 (*_erase_flash_ptr)(u32 a, u32 so);
+ int prot;
+ int sect;
+ unsigned size;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("- missing\n");
+ } else {
+ printf("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == (AMD_MANUFACT & FLASH_VENDMASK)) {
+ size = (unsigned)&_amd_erase_flash_end - (unsigned)_amd_erase_flash;
+
+ if (size > PROBE_BUFFER_SIZE) {
+ printf("_amd_erase_flash() routine too large (%d) %p - %p\n",
+ size, &_amd_erase_flash_end, _amd_erase_flash);
+ return 0;
+ }
+
+ memcpy(buffer, _amd_erase_flash, size);
+ _erase_flash_ptr = (void*)buffer;
+
+ } else if ((info->flash_id & FLASH_VENDMASK) == (INTEL_MANUFACT & FLASH_VENDMASK)) {
+ size = (unsigned)&_intel_erase_flash_end - (unsigned)_intel_erase_flash;
+
+ if (size > PROBE_BUFFER_SIZE) {
+ printf("_intel_erase_flash() routine too large (%d) %p - %p\n",
+ size, &_intel_erase_flash_end, _intel_erase_flash);
+ return 0;
+ }
+
+ memcpy(buffer, _intel_erase_flash, size);
+ _erase_flash_ptr = (void*)buffer;
+ } else {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+ } else {
+ printf ("\n");
+ }
+
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+
+ if (info->protect[sect] == 0) { /* not protected */
+ int res;
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ res = _erase_flash_ptr(info->start[0], info->start[sect]-info->start[0]);
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+
+
+ if (res) {
+ printf("Erase timed out, sector %d\n", sect);
+ return res;
+ }
+
+ putc('.');
+ }
+ }
+
+
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int _amd_write_word(unsigned start, unsigned dest, unsigned data)
+{
+ volatile u16 *addr2 = (u16*)start;
+ volatile u16 *dest2 = (u16*)dest;
+ volatile u16 *data2 = (u16*)&data;
+ int i;
+ unsigned elapsed;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((volatile u16*)dest) & (u16)data) != (u16)data) {
+ return 2;
+ }
+
+ for (i = 0; i < 2; i++) {
+
+
+ addr2[0x5555] = 0x00AA;
+ addr2[0x2aaa] = 0x0055;
+ addr2[0x5555] = 0x00A0;
+
+ dest2[i] = (data >> (i*16)) & 0xffff;
+
+ elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */
+ elapsed = 0;
+
+ /* data polling for D7 */
+ while ((dest2[i] & 0x0080) != (data2[i] & 0x0080)) {
+ elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
+ if (elapsed > ((CFG_FLASH_WRITE_TOUT/CFG_HZ) * 1000)) {
+ addr2[i] = 0x00f0;
+ return 1;
+ }
+ }
+ }
+
+ addr2[i] = 0x00f0;
+
+ return 0;
+}
+
+extern int _amd_write_word_end;
+asm ("_amd_write_word_end:\n"
+ ".long 0\n");
+
+
+
+static int _intel_write_word(unsigned start, unsigned dest, unsigned data)
+{
+ int i;
+ unsigned elapsed;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((volatile u16*)dest) & (u16)data) != (u16)data) {
+ return 2;
+ }
+
+ for (i = 0; i < 2; i++) {
+
+ *(volatile u16*)(dest+2*i) = 0x0040; /* write setup */
+ *(volatile u16*)(dest+2*i) = (data >> (i*16)) & 0xffff;
+
+ elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */
+ elapsed = 0;
+
+ /* data polling for D7 */
+ while ((*(volatile u16*)dest & 0x0080) != 0x0080) {
+ elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
+ if (elapsed > ((CFG_FLASH_WRITE_TOUT/CFG_HZ) * 1000)) {
+ *(volatile u16*)dest = 0x00ff;
+ return 1;
+ }
+ }
+ }
+
+ *(volatile u16*)dest = 0x00ff;
+
+
+ return 0;
+
+}
+
+extern int _intel_write_word_end;
+asm ("_intel_write_word_end:\n"
+ ".long 0\n");
+
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 3 - Unsupported flash type
+ */
+
+int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+ int flag;
+ u32 (*_write_word_ptr)(unsigned start, unsigned dest, unsigned data);
+ unsigned size;
+
+ if ((info->flash_id & FLASH_VENDMASK) == (AMD_MANUFACT & FLASH_VENDMASK)) {
+ size = (unsigned)&_amd_write_word_end - (unsigned)_amd_write_word;
+
+ if (size > PROBE_BUFFER_SIZE) {
+ printf("_amd_write_word() routine too large (%d) %p - %p\n",
+ size, &_amd_write_word_end, _amd_write_word);
+ return 0;
+ }
+
+ memcpy(buffer, _amd_write_word, size);
+ _write_word_ptr = (void*)buffer;
+
+ } else if ((info->flash_id & FLASH_VENDMASK) == (INTEL_MANUFACT & FLASH_VENDMASK)) {
+ size = (unsigned)&_intel_write_word_end - (unsigned)_intel_write_word;
+
+ if (size > PROBE_BUFFER_SIZE) {
+ printf("_intel_write_word() routine too large (%d) %p - %p\n",
+ size, &_intel_write_word_end, _intel_write_word);
+ return 0;
+ }
+
+ memcpy(buffer, _intel_write_word, size);
+ _write_word_ptr = (void*)buffer;
+ } else {
+ printf ("Can't program unknown flash type - aborted\n");
+ return 3;
+ }
+
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data |= (*(uchar *)cp) << (8*i);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data |= *src++ << (8*i);
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data |= (*(uchar *)cp) << (8*i);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ rc = _write_word_ptr(info->start[0], wp, data);
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+ if (rc != 0) {
+ return rc;
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+
+ for (i=0; i<4; ++i) {
+ data |= *src++ << (8*i);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ rc = _write_word_ptr(info->start[0], wp, data);
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+ if (rc != 0) {
+ return rc;
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return 0;
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data |= *src++ << (8*i);
+ --cnt;
+ }
+
+ for (; i<4; ++i, ++cp) {
+ data |= (*(uchar *)cp) << (8*i);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ rc = _write_word_ptr(info->start[0], wp, data);
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+
+ return rc;
+
+}
+
+
diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c
new file mode 100644
index 0000000..962e04e
--- /dev/null
+++ b/board/sc520_spunk/sc520_spunk.c
@@ -0,0 +1,686 @@
+/*
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <ssi.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/ic/sc520.h>
+
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Theory:
+ * We first set up all IRQs to be non-pci, edge triggered,
+ * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets
+ * called we reallocate irqs to the pci bus with sc520_pci_set_irq()
+ * as needed. Whe choose the irqs to gram from a configurable list
+ * inside pci_sc520_fixup_irq() (If this list contains stupid irq's
+ * such as 0 thngas will not work)
+ */
+
+static void irq_init(void)
+{
+ /* disable global interrupt mode */
+ write_mmcr_byte(SC520_PICICR, 0x40);
+
+ /* set all irqs to edge */
+ write_mmcr_byte(SC520_MPICMODE, 0x00);
+ write_mmcr_byte(SC520_SL1PICMODE, 0x00);
+ write_mmcr_byte(SC520_SL2PICMODE, 0x00);
+
+ /* active low polarity on PIC interrupt pins,
+ * active high polarity on all other irq pins */
+ write_mmcr_word(SC520_INTPINPOL, 0x0000);
+
+ /* set irq number mapping */
+ write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */
+ write_mmcr_byte(SC520_GPTMR1MAP, SC520_IRQ_DISABLED); /* disable GP timer 1 INT */
+ write_mmcr_byte(SC520_GPTMR2MAP, SC520_IRQ_DISABLED); /* disable GP timer 2 INT */
+ write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */
+ write_mmcr_byte(SC520_PIT1MAP, SC520_IRQ_DISABLED); /* disable PIT timer 1 INT */
+ write_mmcr_byte(SC520_PIT2MAP, SC520_IRQ_DISABLED); /* disable PIT timer 2 INT */
+ write_mmcr_byte(SC520_PCIINTAMAP, SC520_IRQ_DISABLED); /* disable PCI INT A */
+ write_mmcr_byte(SC520_PCIINTBMAP, SC520_IRQ_DISABLED); /* disable PCI INT B */
+ write_mmcr_byte(SC520_PCIINTCMAP, SC520_IRQ_DISABLED); /* disable PCI INT C */
+ write_mmcr_byte(SC520_PCIINTDMAP, SC520_IRQ_DISABLED); /* disable PCI INT D */
+ write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */
+ write_mmcr_byte(SC520_SSIMAP, SC520_IRQ6); /* Set Synchronius serial INT to IRQ6*/
+ write_mmcr_byte(SC520_WDTMAP, SC520_IRQ_DISABLED); /* disable Watchdog INT */
+ write_mmcr_byte(SC520_RTCMAP, SC520_IRQ8); /* Set RTC int to 8 */
+ write_mmcr_byte(SC520_WPVMAP, SC520_IRQ_DISABLED); /* disable write protect INT */
+ write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1); /* Set ICE Debug Serielport INT to IRQ1 */
+ write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13); /* Set FP error INT to IRQ13 */
+
+ write_mmcr_byte(SC520_UART1MAP, SC520_IRQ4); /* Set internal UART2 INT to IRQ4 */
+ write_mmcr_byte(SC520_UART2MAP, SC520_IRQ3); /* Set internal UART2 INT to IRQ3 */
+
+ write_mmcr_byte(SC520_GP0IMAP, SC520_IRQ7); /* Set GPIRQ0 (PC-Card AUX IRQ) to IRQ7 */
+ write_mmcr_byte(SC520_GP1IMAP, SC520_IRQ14); /* Set GPIRQ1 (CF IRQ) to IRQ14 */
+ write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ5); /* Set GPIRQ3 ( CAN IRQ ) ti IRQ5 */
+ write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ_DISABLED); /* disbale GIRQ4 ( IRR IRQ ) */
+ write_mmcr_byte(SC520_GP5IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ5 */
+ write_mmcr_byte(SC520_GP6IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ6 */
+ write_mmcr_byte(SC520_GP7IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ7 */
+ write_mmcr_byte(SC520_GP8IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ8 */
+ write_mmcr_byte(SC520_GP9IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ9 */
+ write_mmcr_byte(SC520_GP2IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ2 */
+ write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ_DISABLED); /* disable GPIRQ10 */
+
+ write_mmcr_word(SC520_PCIHOSTMAP, 0x11f); /* Map PCI hostbridge INT to NMI */
+ write_mmcr_word(SC520_ECCMAP, 0x100); /* Map SDRAM ECC failure INT to NMI */
+
+}
+
+
+/* PCI stuff */
+static void pci_sc520_spunk_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+ int version = read_mmcr_byte(SC520_SYSINFO);
+
+ /* a configurable lists of irqs to steal
+ * when we need one (a board with more pci interrupt pins
+ * would use a larger table */
+ static int irq_list[] = {
+ CFG_FIRST_PCI_IRQ,
+ CFG_SECOND_PCI_IRQ,
+ CFG_THIRD_PCI_IRQ,
+ CFG_FORTH_PCI_IRQ
+ };
+ static int next_irq_index=0;
+
+ char tmp_pin;
+ int pin;
+
+ pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin);
+ pin = tmp_pin;
+
+ pin-=1; /* pci config space use 1-based numbering */
+ if (-1 == pin) {
+ return; /* device use no irq */
+ }
+
+
+
+ /* map device number + pin to a pin on the sc520 */
+ switch (PCI_DEV(dev)) {
+ case 6: /* ETH0 */
+ pin+=SC520_PCI_INTA;
+ break;
+
+ case 7: /* ETH1 */
+ pin+=SC520_PCI_INTB;
+ break;
+
+ case 8: /* Crypto */
+ pin+=SC520_PCI_INTC;
+ break;
+
+ case 9: /* PMC slot */
+ pin+=SC520_PCI_INTD;
+ break;
+
+ case 10: /* PC-Card */
+
+ if (version < 10) {
+ pin+=SC520_PCI_INTD;
+ } else {
+ pin+=SC520_PCI_INTC;
+ }
+ break;
+
+ default:
+ return;
+ }
+
+ pin&=3; /* wrap around */
+
+ if (sc520_pci_ints[pin] == -1) {
+ /* re-route one interrupt for us */
+ if (next_irq_index > 3) {
+ return;
+ }
+ if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) {
+ return;
+ }
+ next_irq_index++;
+ }
+
+
+ if (-1 != sc520_pci_ints[pin]) {
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
+ sc520_pci_ints[pin]);
+ }
+#if 0
+ printf("fixup_irq: device %d pin %c irq %d\n",
+ PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]);
+#endif
+}
+
+
+static void pci_sc520_spunk_configure_cardbus(struct pci_controller *hose,
+ pci_dev_t dev, struct pci_config_table *te)
+{
+ u32 io_base;
+ u32 temp;
+
+ pciauto_config_device(hose, dev);
+
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, 0x07); /* enable device */
+ pci_hose_write_config_byte(hose, dev, 0x0c, 0x10); /* cacheline size */
+ pci_hose_write_config_byte(hose, dev, 0x0d, 0x40); /* latency timer */
+ pci_hose_write_config_byte(hose, dev, 0x1b, 0x40); /* cardbus latency timer */
+ pci_hose_write_config_word(hose, dev, PCI_BRIDGE_CONTROL, 0x0040); /* reset cardbus */
+ pci_hose_write_config_word(hose, dev, PCI_BRIDGE_CONTROL, 0x0080); /* route interrupts though ExCA */
+ pci_hose_write_config_word(hose, dev, 0x44, 0x3e0); /* map legacy I/O port to 0x3e0 */
+
+ pci_hose_read_config_dword(hose, dev, 0x80, &temp); /* System control */
+ pci_hose_write_config_dword(hose, dev, 0x80, temp | 0x60); /* System control: disable clockrun */
+ /* route MF0 to ~INT and MF3 to IRQ7
+ * reserve all others */
+ pci_hose_write_config_dword(hose, dev, 0x8c, 0x00007002);
+ pci_hose_write_config_byte(hose, dev, 0x91, 0x00); /* card control */
+ pci_hose_write_config_byte(hose, dev, 0x92, 0x62); /* device control */
+
+ if (te->device != 0xac56) {
+ pci_hose_write_config_byte(hose, dev, 0x93, 0x21); /* async interrupt enable */
+ pci_hose_write_config_word(hose, dev, 0xa8, 0x0000); /* reset GPIO */
+ pci_hose_write_config_word(hose, dev, 0xac, 0x0000); /* reset GPIO */
+ pci_hose_write_config_word(hose, dev, 0xaa, 0x0000); /* reset GPIO */
+ pci_hose_write_config_word(hose, dev, 0xae, 0x0000); /* reset GPIO */
+ } else {
+ pci_hose_write_config_byte(hose, dev, 0x93, 0x20); /* */
+ }
+ pci_hose_write_config_word(hose, dev, 0xa4, 0x8000); /* reset power management */
+
+
+ pci_hose_read_config_dword(hose, dev, PCI_BASE_ADDRESS_0, &io_base);
+ io_base &= ~0xfL;
+
+ writeb(0x07, io_base+0x803); /* route CSC irq though ExCA and enable IRQ7 */
+ writel(0, io_base+0x10); /* CLKRUN default */
+ writel(0, io_base+0x20); /* CLKRUN default */
+
+}
+
+
+
+static struct pci_config_table pci_sc520_spunk_config_table[] = {
+ { 0x104c, 0xac50, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} },
+ { 0x104c, 0xac56, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} },
+ { 0, 0, 0, 0, 0, 0, NULL, {0,0,0}}
+};
+
+static struct pci_controller sc520_spunk_hose = {
+ fixup_irq: pci_sc520_spunk_fixup_irq,
+ config_table: pci_sc520_spunk_config_table,
+ first_busno: 0x00,
+ last_busno: 0xff,
+};
+
+void pci_init_board(void)
+{
+ pci_sc520_init(&sc520_spunk_hose);
+}
+
+
+/* set up the ISA bus timing and system address mappings */
+static void bus_init(void)
+{
+ /* versions
+ * 0 Hyglo versions 0.95 and 0.96 (large baords)
+ * ?? Hyglo version 0.97 (small board)
+ * 10 Spunk board
+ */
+ int version = read_mmcr_byte(SC520_SYSINFO);
+
+ if (version) {
+ /* set up the GP IO pins (for the Spunk board) */
+ write_mmcr_word(SC520_PIOPFS31_16, 0xfff0); /* set the GPIO pin function 31-16 reg */
+ write_mmcr_word(SC520_PIOPFS15_0, 0x000f); /* set the GPIO pin function 15-0 reg */
+ write_mmcr_word(SC520_PIODIR31_16, 0x000f); /* set the GPIO direction 31-16 reg */
+ write_mmcr_word(SC520_PIODIR15_0, 0x1ff0); /* set the GPIO direction 15-0 reg */
+ write_mmcr_byte(SC520_CSPFS, 0xc0); /* set the CS pin function reg */
+ write_mmcr_byte(SC520_CLKSEL, 0x70);
+
+ write_mmcr_word(SC520_PIOCLR31_16, 0x0003); /* reset SSI chip-selects */
+ write_mmcr_word(SC520_PIOSET31_16, 0x000c);
+
+ } else {
+ /* set up the GP IO pins (for the Hyglo board) */
+ write_mmcr_word(SC520_PIOPFS31_16, 0xffc0); /* set the GPIO pin function 31-16 reg */
+ write_mmcr_word(SC520_PIOPFS15_0, 0x1e7f); /* set the GPIO pin function 15-0 reg */
+ write_mmcr_word(SC520_PIODIR31_16, 0x003f); /* set the GPIO direction 31-16 reg */
+ write_mmcr_word(SC520_PIODIR15_0, 0xe180); /* set the GPIO direction 15-0 reg */
+ write_mmcr_byte(SC520_CSPFS, 0x00); /* set the CS pin function reg */
+ write_mmcr_byte(SC520_CLKSEL, 0x70);
+
+ write_mmcr_word(SC520_PIOCLR15_0, 0x0180); /* reset SSI chip-selects */
+ }
+
+ write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */
+ write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */
+ write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */
+ write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */
+ write_mmcr_byte(SC520_GPRDOFF, 1); /* set the GP RD offset */
+ write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */
+ write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */
+
+ write_mmcr_word(SC520_BOOTCSCTL, 0x0407); /* set up timing of BOOTCS */
+
+ /* adjust the memory map:
+ * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM
+ * and 256MB to 1G-128k (0x1000000 - 0x37ffffff) is mapped to PCI mmio
+ * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */
+
+
+
+ /* bootcs */
+ write_mmcr_long(SC520_PAR12, 0x8bffe800);
+
+ /* IDE0 = GPCS6 1f0-1f7 */
+ write_mmcr_long(SC520_PAR3, 0x380801f0);
+
+ /* IDE1 = GPCS7 3f6 */
+ write_mmcr_long(SC520_PAR4, 0x3c0003f6);
+
+ asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */
+
+ write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS));
+
+}
+
+
+
+/* par usage:
+ * PAR0 (legacy_video)
+ * PAR1 (PCI ROM mapping)
+ * PAR2
+ * PAR3 IDE
+ * PAR4 IDE
+ * PAR5 (legacy_video)
+ * PAR6
+ * PAR7 (legacy_video)
+ * PAR8 (legacy_video)
+ * PAR9 (legacy_video)
+ * PAR10
+ * PAR11 (ISAROM)
+ * PAR12 BOOTCS
+ * PAR13
+ * PAR14
+ * PAR15
+ */
+
+/*
+ * This function should map a chunk of size bytes
+ * of the system address space to the ISA bus
+ *
+ * The function will return the memory address
+ * as seen by the host (which may very will be the
+ * same as the bus address)
+ */
+u32 isa_map_rom(u32 bus_addr, int size)
+{
+ u32 par;
+
+ printf("isa_map_rom asked to map %d bytes at %x\n",
+ size, bus_addr);
+
+ par = size;
+ if (par < 0x80000) {
+ par = 0x80000;
+ }
+ par >>= 12;
+ par--;
+ par&=0x7f;
+ par <<= 18;
+ par |= (bus_addr>>12);
+ par |= 0x50000000;
+
+ printf ("setting PAR11 to %x\n", par);
+
+ /* Map rom 0x10000 with PAR1 */
+ write_mmcr_long(SC520_PAR11, par);
+
+ return bus_addr;
+}
+
+/*
+ * this function removed any mapping created
+ * with pci_get_rom_window()
+ */
+void isa_unmap_rom(u32 addr)
+{
+ printf("isa_unmap_rom asked to unmap %x", addr);
+ if ((addr>>12) == (read_mmcr_long(SC520_PAR11)&0x3ffff)) {
+ write_mmcr_long(SC520_PAR11, 0);
+ printf(" done\n");
+ return;
+ }
+ printf(" not ours\n");
+}
+
+#ifdef CONFIG_PCI
+#define PCI_ROM_TEMP_SPACE 0x10000
+/*
+ * This function should map a chunk of size bytes
+ * of the system address space to the PCI bus,
+ * suitable to map PCI ROMS (bus address < 16M)
+ * the function will return the host memory address
+ * which should be converted into a bus address
+ * before used to configure the PCI rom address
+ * decoder
+ */
+u32 pci_get_rom_window(struct pci_controller *hose, int size)
+{
+ u32 par;
+
+ par = size;
+ if (par < 0x80000) {
+ par = 0x80000;
+ }
+ par >>= 16;
+ par--;
+ par&=0x7ff;
+ par <<= 14;
+ par |= (PCI_ROM_TEMP_SPACE>>16);
+ par |= 0x72000000;
+
+ printf ("setting PAR1 to %x\n", par);
+
+ /* Map rom 0x10000 with PAR1 */
+ write_mmcr_long(SC520_PAR1, par);
+
+ return PCI_ROM_TEMP_SPACE;
+}
+
+/*
+ * this function removed any mapping created
+ * with pci_get_rom_window()
+ */
+void pci_remove_rom_window(struct pci_controller *hose, u32 addr)
+{
+ printf("pci_remove_rom_window: %x", addr);
+ if (addr == PCI_ROM_TEMP_SPACE) {
+ write_mmcr_long(SC520_PAR1, 0);
+ printf(" done\n");
+ return;
+ }
+ printf(" not ours\n");
+
+}
+
+/*
+ * This function is called in order to provide acces to the
+ * legacy video I/O ports on the PCI bus.
+ * After this function accesses to I/O ports 0x3b0-0x3bb and
+ * 0x3c0-0x3df shuld result in transactions on the PCI bus.
+ *
+ */
+int pci_enable_legacy_video_ports(struct pci_controller *hose)
+{
+ /* Map video memory to 0xa0000*/
+ write_mmcr_long(SC520_PAR0, 0x7200400a);
+
+ /* forward all I/O accesses to PCI */
+ write_mmcr_byte(SC520_ADDDECCTL,
+ read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI);
+
+
+ /* so we map away all io ports to pci (only way to access pci io
+ * below 0x400. But then we have to map back the portions that we dont
+ * use so that the generate cycles on the GPIO bus where the sio and
+ * ISA slots are connected, this requre the use of several PAR registers
+ */
+
+ /* bring 0x100 - 0x2f7 back to ISA using PAR5 */
+ write_mmcr_long(SC520_PAR5, 0x31f70100);
+
+ /* com2 use 2f8-2ff */
+
+ /* bring 0x300 - 0x3af back to ISA using PAR7 */
+ write_mmcr_long(SC520_PAR7, 0x30af0300);
+
+ /* vga use 3b0-3bb */
+
+ /* bring 0x3bc - 0x3bf back to ISA using PAR8 */
+ write_mmcr_long(SC520_PAR8, 0x300303bc);
+
+ /* vga use 3c0-3df */
+
+ /* bring 0x3e0 - 0x3f7 back to ISA using PAR9 */
+ write_mmcr_long(SC520_PAR9, 0x301703e0);
+
+ /* com1 use 3f8-3ff */
+
+ return 0;
+}
+#endif
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ init_sc520();
+ bus_init();
+ irq_init();
+
+ /* max drive current on SDRAM */
+ write_mmcr_word(SC520_DSCTL, 0x0100);
+
+ /* enter debug mode after next reset (only if jumper is also set) */
+ write_mmcr_byte(SC520_RESCFG, 0x08);
+ /* configure the software timer to 33.000MHz */
+ write_mmcr_byte(SC520_SWTMRCFG, 1);
+ gd->bus_clk = 33000000;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ init_sc520_dram();
+ return 0;
+}
+
+void show_boot_progress(int val)
+{
+ int version = read_mmcr_byte(SC520_SYSINFO);
+
+ if (version == 0) {
+ /* PIO31-PIO16 Data */
+ write_mmcr_word(SC520_PIODATA31_16,
+ (read_mmcr_word(SC520_PIODATA31_16) & 0xffc0)| ((val&0x7e)>>1)); /* 0x1f8 >> 3 */
+
+ /* PIO0-PIO15 Data */
+ write_mmcr_word(SC520_PIODATA15_0,
+ (read_mmcr_word(SC520_PIODATA15_0) & 0x1fff)| ((val&0x7)<<13));
+ } else {
+ /* newer boards use PIO4-PIO12 */
+ /* PIO0-PIO15 Data */
+#if 0
+ val = (val & 0x007) | ((val & 0x038) << 3) | ((val & 0x1c0) >> 3);
+#else
+ val = (val & 0x007) | ((val & 0x07e) << 2);
+#endif
+ write_mmcr_word(SC520_PIODATA15_0,
+ (read_mmcr_word(SC520_PIODATA15_0) & 0xe00f) | ((val&0x01ff)<<4));
+ }
+}
+
+
+int last_stage_init(void)
+{
+
+ int version = read_mmcr_byte(SC520_SYSINFO);
+
+ printf("Omicron Ceti SC520 Spunk revision %x\n", version);
+
+#if 0
+ if (version) {
+ int x, y;
+
+ printf("eeprom probe %d\n", spi_eeprom_probe(1));
+
+ spi_eeprom_read(1, 0, (u8*)&x, 2);
+ spi_eeprom_read(1, 1, (u8*)&y, 2);
+ printf("eeprom bytes %04x%04x\n", x, y);
+ x ^= 0xffff;
+ y ^= 0xffff;
+ spi_eeprom_write(1, 0, (u8*)&x, 2);
+ spi_eeprom_write(1, 1, (u8*)&y, 2);
+
+ spi_eeprom_read(1, 0, (u8*)&x, 2);
+ spi_eeprom_read(1, 1, (u8*)&y, 2);
+ printf("eeprom bytes %04x%04x\n", x, y);
+
+ } else {
+ int x, y;
+
+ printf("eeprom probe %d\n", mw_eeprom_probe(1));
+
+ mw_eeprom_read(1, 0, (u8*)&x, 2);
+ mw_eeprom_read(1, 1, (u8*)&y, 2);
+ printf("eeprom bytes %04x%04x\n", x, y);
+
+ x ^= 0xffff;
+ y ^= 0xffff;
+ mw_eeprom_write(1, 0, (u8*)&x, 2);
+ mw_eeprom_write(1, 1, (u8*)&y, 2);
+
+ mw_eeprom_read(1, 0, (u8*)&x, 2);
+ mw_eeprom_read(1, 1, (u8*)&y, 2);
+ printf("eeprom bytes %04x%04x\n", x, y);
+
+
+ }
+#endif
+
+ ds1722_probe(2);
+
+ return 0;
+}
+
+void ssi_chip_select(int dev)
+{
+ int version = read_mmcr_byte(SC520_SYSINFO);
+
+ if (version) {
+ /* Spunk board: EEPROM and CAN are actove-low, TEMP and AUX are active high */
+ switch (dev) {
+ case 1: /* EEPROM */
+ write_mmcr_word(SC520_PIOCLR31_16, 0x0004);
+ break;
+
+ case 2: /* Temp Probe */
+ write_mmcr_word(SC520_PIOSET31_16, 0x0002);
+ break;
+
+ case 3: /* CAN */
+ write_mmcr_word(SC520_PIOCLR31_16, 0x0008);
+ break;
+
+ case 4: /* AUX */
+ write_mmcr_word(SC520_PIOSET31_16, 0x0001);
+ break;
+
+ case 0:
+ write_mmcr_word(SC520_PIOCLR31_16, 0x0003);
+ write_mmcr_word(SC520_PIOSET31_16, 0x000c);
+ break;
+
+ default:
+ printf("Illegal SSI device requested: %d\n", dev);
+ }
+ } else {
+
+ /* Globox board: Both EEPROM and TEMP are active-high */
+
+ switch (dev) {
+ case 1: /* EEPROM */
+ write_mmcr_word(SC520_PIOSET15_0, 0x0100);
+ break;
+
+ case 2: /* Temp Probe */
+ write_mmcr_word(SC520_PIOSET15_0, 0x0080);
+ break;
+
+ case 0:
+ write_mmcr_word(SC520_PIOCLR15_0, 0x0180);
+ break;
+
+ default:
+ printf("Illegal SSI device requested: %d\n", dev);
+ }
+ }
+}
+
+
+void spi_init_f(void)
+{
+ read_mmcr_byte(SC520_SYSINFO) ?
+ spi_eeprom_probe(1) :
+ mw_eeprom_probe(1);
+
+}
+
+ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
+{
+ int offset;
+ int i;
+
+ offset = 0;
+ for (i=0;i<alen;i++) {
+ offset <<= 8;
+ offset |= addr[i];
+ }
+
+ return read_mmcr_byte(SC520_SYSINFO) ?
+ spi_eeprom_read(1, offset, buffer, len) :
+ mw_eeprom_read(1, offset, buffer, len);
+}
+
+ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
+{
+ int offset;
+ int i;
+
+ offset = 0;
+ for (i=0;i<alen;i++) {
+ offset <<= 8;
+ offset |= addr[i];
+ }
+
+ return read_mmcr_byte(SC520_SYSINFO) ?
+ spi_eeprom_write(1, offset, buffer, len) :
+ mw_eeprom_write(1, offset, buffer, len);
+}
+
diff --git a/board/sc520_spunk/sc520_spunk_asm.S b/board/sc520_spunk/sc520_spunk_asm.S
new file mode 100644
index 0000000..e198125
--- /dev/null
+++ b/board/sc520_spunk/sc520_spunk_asm.S
@@ -0,0 +1,82 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* now setup the General purpose bus to give us access to the LEDs.
+ * We can then use the leds to display status information.
+ */
+
+sc520_cdp_registers:
+/* size offset value */
+.word 1 ; .word 0x040 ; .long 0x00 /* SDRAM buffer control */
+.word 2 ; .word 0xc08 ; .long 0x0001 /* GP CS offset */
+.word 2 ; .word 0xc09 ; .long 0x0003 /* GP CS width */
+.word 2 ; .word 0xc0a ; .long 0x0001 /* GP CS width */
+.word 2 ; .word 0xc0b ; .long 0x0003 /* GP RD pulse width */
+.word 2 ; .word 0xc0c ; .long 0x0001 /* GP RD offse */
+.word 2 ; .word 0xc0d ; .long 0x0003 /* GP WR pulse width */
+.word 2 ; .word 0xc0e ; .long 0x0001 /* GP WR offset */
+.word 2 ; .word 0xc2c ; .long 0x003f /* GPIO directionreg 31-16 */
+.word 2 ; .word 0xc2a ; .long 0xe000 /* GPIO directionreg 15-0 */
+.word 2 ; .word 0xc22 ; .long 0xffc0 /* GPIO pin function 31-16 reg */
+.word 2 ; .word 0xc20 ; .long 0x1fff /* GPIO pin function 15-0 reg */
+.word 0 ; .word 0x000 ; .long 0x00
+
+/* board early intialization */
+.globl early_board_init
+early_board_init:
+ movl $sc520_cdp_registers,%esi
+init_loop:
+ movl $0xfffef000,%edi /* MMCR base to edi */
+ movw (%esi), %bx /* load size to bx */
+ cmpw $0, %bx /* if size is 0 we're done */
+ je done
+ xorl %edx,%edx
+ movw 2(%esi), %dx /* load MMCR offset to dx */
+ addl %edx, %edi /* add offset to base in edi */
+ movl 4(%esi), %eax /* load value in eax */
+ cmpw $1, %bx
+ je byte /* byte op? */
+ cmpw $2, %bx
+ je word /* word op? */
+ movl %eax, (%edi) /* must be long, then */
+ jmp next
+byte: movb %al,(%edi)
+ jmp next
+word: movw %ax,(%edi)
+next: addl $8, %esi /* advance esi */
+ jmp init_loop
+
+ /* light all leds */
+done: movl $0xfffefc32,%edx
+ movw $0000,(%edx)
+
+ jmp *%ebp /* return to caller */
+
+
+.globl __show_boot_progress
+__show_boot_progress:
+ movl $0xfffefc32,%edx
+ xorw $0xffff, %ax
+ movw %ax,(%edx)
+ jmp *%ebp
+
diff --git a/board/sc520_spunk/sc520_spunk_asm16.S b/board/sc520_spunk/sc520_spunk_asm16.S
new file mode 100644
index 0000000..cdcbbbe
--- /dev/null
+++ b/board/sc520_spunk/sc520_spunk_asm16.S
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * 16bit initialization code.
+ * This code have to map the area of the boot flash
+ * that is used by U-boot to its final destination.
+ */
+
+.text
+.section .start16, "ax"
+.code16
+.globl board_init16
+board_init16:
+ /* Alias MMCR to 0xdf000 */
+ movw $0xfffc, %dx
+ movl $0x800df0cb, %eax
+ outl %eax, %dx
+
+ /* Set ds to point to MMCR alias */
+ movw $0xdf00, %ax
+ movw %ax, %ds
+
+ /* Map the entire flash at 0x38000000
+ * (with BOOTCS and PAR14, use 0xabfff800 for ROMCS1) */
+ movl $0xc0, %edi
+ movl $0x8bfff800, %eax
+ movl %eax, (%di)
+
+ /* Disable SDRAM write buffer */
+ movw $0x40,%di
+ xorw %ax,%ax
+ movb %al, (%di)
+
+ /* Disabe MMCR alias */
+ movw $0xfffc, %dx
+ movl $0x000000cb, %eax
+ outl %eax, %dx
+
+ /* the return address is stored in bp */
+ jmp *%bp
+
+
+.section .bios, "ax"
+.code16
+.globl realmode_reset
+realmode_reset:
+ /* Alias MMCR to 0xdf000 */
+ movw $0xfffc, %dx
+ movl $0x800df0cb, %eax
+ outl %eax, %dx
+
+ /* Set ds to point to MMCR alias */
+ movw $0xdf00, %ax
+ movw %ax, %ds
+
+ /* issue software reset thorugh MMCR */
+ movl $0xd72, %edi
+ movb $0x01, %al
+ movb %al, (%di)
+
+1: hlt
+ jmp 1
+
diff --git a/board/sc520_spunk/u-boot.lds b/board/sc520_spunk/u-boot.lds
new file mode 100644
index 0000000..fbab9b8
--- /dev/null
+++ b/board/sc520_spunk/u-boot.lds
@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
+OUTPUT_ARCH(i386)
+ENTRY(_start)
+
+SECTIONS
+{
+ . = 0x387c0000; /* Where bootcode in the flash is mapped */
+ .text : { *(.text); }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = 0x400000; /* Ram data segment to use */
+ _i386boot_romdata_dest = ABSOLUTE(.);
+ .data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) }
+ _i386boot_romdata_start = LOADADDR(.data);
+
+ . = ALIGN(4);
+ .got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) }
+ _i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got);
+
+
+ . = ALIGN(4);
+ _i386boot_bss_start = ABSOLUTE(.);
+ .bss : { *(.bss) }
+ _i386boot_bss_size = SIZEOF(.bss);
+
+
+ /* 16bit realmode trampoline code */
+ .realmode 0x7c0 : AT ( LOADADDR(.got) + SIZEOF(.got) ) { *(.realmode) }
+
+ _i386boot_realmode = LOADADDR(.realmode);
+ _i386boot_realmode_size = SIZEOF(.realmode);
+
+ /* 16bit BIOS emulation code (just enough to boot Linux) */
+ .bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { *(.bios) }
+
+ _i386boot_bios = LOADADDR(.bios);
+ _i386boot_bios_size = SIZEOF(.bios);
+
+
+ /* The load addresses below assumes that the flash
+ * will be mapped so that 0x387f0000 == 0xffff0000
+ * at reset time
+ *
+ * The fe00 and ff00 offsets of the start32 and start16
+ * segments are arbitrary, the just have to be mapped
+ * at reset and the code have to fit.
+ * The fff0 offset of reset is important, however.
+ */
+
+
+ . = 0xfffffe00;
+ .start32 : AT (0x387ffe00) { *(.start32); }
+
+ . = 0xff00;
+ .start16 : AT (0x387fff00) { *(.start16); }
+
+ . = 0xfff0;
+ .reset : AT (0x387ffff0) { *(.reset); }
+ _i386boot_end = (LOADADDR(.reset) + SIZEOF(.reset) );
+}