From 7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed Mon Sep 17 00:00:00 2001 From: wdenk Date: Sat, 31 May 2003 18:35:21 +0000 Subject: * Patch by Marc Singer, 29 May 2003: Fixed rarp boot method for IA32 and other little-endian CPUs. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * Patch by Marc Singer, 28 May 2003: Added port I/O commands. * Patch by Matthew McClintock, 28 May 2003 - cpu/mpc824x/start.S: fix relocation code when booting from RAM - minor patches for utx8245 * Patch by Daniel Engström, 28 May 2003: x86 update * Patch by Dave Ellis, 9 May 2003 + 27 May 2003: add nand flash support to SXNI855T configuration fix/extend nand flash support: - fix 'nand erase' command so does not erase bad blocks - fix 'nand write' command so does not write to bad blocks - fix nand_probe() so handles no flash detected properly - add doc/README.nand - add .jffs2 and .oob options to nand read/write - add 'nand bad' command to list bad blocks - add 'clean' option to 'nand erase' to write JFFS2 clean markers - make NAND read/write faster * Patch by Rune Torgersen, 23 May 2003: Update for MPC8266ADS board --- board/sc520_spunk/Makefile | 47 ++ board/sc520_spunk/config.mk | 25 ++ board/sc520_spunk/flash.c | 813 ++++++++++++++++++++++++++++++++++ board/sc520_spunk/sc520_spunk.c | 686 ++++++++++++++++++++++++++++ board/sc520_spunk/sc520_spunk_asm.S | 82 ++++ board/sc520_spunk/sc520_spunk_asm16.S | 84 ++++ board/sc520_spunk/u-boot.lds | 85 ++++ 7 files changed, 1822 insertions(+) create mode 100644 board/sc520_spunk/Makefile create mode 100644 board/sc520_spunk/config.mk create mode 100644 board/sc520_spunk/flash.c create mode 100644 board/sc520_spunk/sc520_spunk.c create mode 100644 board/sc520_spunk/sc520_spunk_asm.S create mode 100644 board/sc520_spunk/sc520_spunk_asm16.S create mode 100644 board/sc520_spunk/u-boot.lds (limited to 'board/sc520_spunk') diff --git a/board/sc520_spunk/Makefile b/board/sc520_spunk/Makefile new file mode 100644 index 0000000..53217c3 --- /dev/null +++ b/board/sc520_spunk/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2002 +# Daniel Engström, Omicron Ceti AB, daniel@omicron.se. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := sc520_spunk.o flash.o +SOBJS := sc520_spunk_asm.o sc520_spunk_asm16.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/sc520_spunk/config.mk b/board/sc520_spunk/config.mk new file mode 100644 index 0000000..2253815 --- /dev/null +++ b/board/sc520_spunk/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2002 +# Daniel Engström, Omicron Ceti AB, daniel@omicron.se. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + + +TEXT_BASE = 0x387c0000 diff --git a/board/sc520_spunk/flash.c b/board/sc520_spunk/flash.c new file mode 100644 index 0000000..66ef720 --- /dev/null +++ b/board/sc520_spunk/flash.c @@ -0,0 +1,813 @@ +/* + * (C) Copyright 2002, 2003 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Alex Zuepke + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#define PROBE_BUFFER_SIZE 1024 +static unsigned char buffer[PROBE_BUFFER_SIZE]; + + +#define SC520_MAX_FLASH_BANKS 1 +#define SC520_FLASH_BANK0_BASE 0x38000000 /* BOOTCS */ +#define SC520_FLASH_BANKSIZE 0x8000000 + +#define A29LV641DH_SIZE 0x800000 +#define A29LV641DH_SECTORS 128 + +#define A29LV641MH_SIZE 0x800000 +#define A29LV641MH_SECTORS 128 + +#define I28F320J3A_SIZE 0x400000 +#define I28F320J3A_SECTORS 32 + +#define I28F640J3A_SIZE 0x800000 +#define I28F640J3A_SECTORS 64 + +#define I28F128J3A_SIZE 0x1000000 +#define I28F128J3A_SECTORS 128 + +flash_info_t flash_info[SC520_MAX_FLASH_BANKS]; + +#define READY 1 +#define ERR 2 +#define TMO 4 + +/*----------------------------------------------------------------------- + */ + + +static u32 _probe_flash(u32 addr, u32 bw, int il) +{ + u32 result=0; + + /* First do an unlock cycle for the benefit of + * devices that need it */ + + switch (bw) { + + case 1: + *(volatile u8*)(addr+0x5555) = 0xaa; + *(volatile u8*)(addr+0x2aaa) = 0x55; + *(volatile u8*)(addr+0x5555) = 0x90; + + /* Read vendor */ + result = *(volatile u8*)addr; + result <<= 16; + + /* Read device */ + result |= *(volatile u8*)(addr+2); + + /* Return device to data mode */ + *(volatile u8*)addr = 0xff; + *(volatile u8*)(addr+0x5555), 0xf0; + break; + + case 2: + *(volatile u16*)(addr+0xaaaa) = 0xaaaa; + *(volatile u16*)(addr+0x5554) = 0x5555; + + /* Issue identification command */ + if (il == 2) { + *(volatile u16*)(addr+0xaaaa) = 0x9090; + + /* Read vendor */ + result = *(volatile u8*)addr; + result <<= 16; + + /* Read device */ + result |= *(volatile u8*)(addr+2); + + /* Return device to data mode */ + *(volatile u16*)addr = 0xffff; + *(volatile u16*)(addr+0xaaaa), 0xf0f0; + + } else { + *(volatile u8*)(addr+0xaaaa) = 0x90; + /* Read vendor */ + result = *(volatile u16*)addr; + result <<= 16; + + /* Read device */ + result |= *(volatile u16*)(addr+2); + + /* Return device to data mode */ + *(volatile u8*)addr = 0xff; + *(volatile u8*)(addr+0xaaaa), 0xf0; + } + + break; + + case 4: + *(volatile u32*)(addr+0x5554) = 0xaaaaaaaa; + *(volatile u32*)(addr+0xaaa8) = 0x55555555; + + switch (il) { + case 1: + /* Issue identification command */ + *(volatile u8*)(addr+0x5554) = 0x90; + + /* Read vendor */ + result = *(volatile u16*)addr; + result <<= 16; + + /* Read device */ + result |= *(volatile u16*)(addr+4); + + /* Return device to data mode */ + *(volatile u8*)addr = 0xff; + *(volatile u8*)(addr+0x5554), 0xf0; + break; + + case 2: + /* Issue identification command */ + *(volatile u32*)(addr + 0x5554) = 0x00900090; + + /* Read vendor */ + result = *(volatile u16*)addr; + result <<= 16; + + /* Read device */ + result |= *(volatile u16*)(addr+4); + + /* Return device to data mode */ + *(volatile u32*)addr = 0x00ff00ff; + *(volatile u32*)(addr+0x5554), 0x00f000f0; + break; + + case 4: + /* Issue identification command */ + *(volatile u32*)(addr+0x5554) = 0x90909090; + + /* Read vendor */ + result = *(volatile u8*)addr; + result <<= 16; + + /* Read device */ + result |= *(volatile u8*)(addr+4); + + /* Return device to data mode */ + *(volatile u32*)addr = 0xffffffff; + *(volatile u32*)(addr+0x5554), 0xf0f0f0f0; + break; + } + break; + } + + + + return result; +} + +extern int _probe_flash_end; +asm ("_probe_flash_end:\n" + ".long 0\n"); + +static int identify_flash(unsigned address, int width) +{ + int is; + int device; + int vendor; + int size; + unsigned res; + + u32 (*_probe_flash_ptr)(u32 a, u32 bw, int il); + + size = (unsigned)&_probe_flash_end - (unsigned)_probe_flash; + + if (size > PROBE_BUFFER_SIZE) { + printf("_probe_flash() routine too large (%d) %p - %p\n", + size, &_probe_flash_end, _probe_flash); + return 0; + } + + memcpy(buffer, _probe_flash, size); + _probe_flash_ptr = (void*)buffer; + + is = disable_interrupts(); + res = _probe_flash_ptr(address, width, 1); + if (is) { + enable_interrupts(); + } + + + vendor = res >> 16; + device = res & 0xffff; + + + return res; +} + +ulong flash_init(void) +{ + int i, j; + ulong size = 0; + + for (i = 0; i < SC520_MAX_FLASH_BANKS; i++) { + unsigned id; + ulong flashbase = 0; + int sectsize = 0; + + memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + switch (i) { + case 0: + flashbase = SC520_FLASH_BANK0_BASE; + break; + default: + panic("configured to many flash banks!\n"); + } + + id = identify_flash(flashbase, 2); + switch (id) { + case 0x000122d7: + /* 29LV641DH */ + flash_info[i].flash_id = + (AMD_MANUFACT & FLASH_VENDMASK) | + (AMD_ID_LV640U & FLASH_TYPEMASK); + + flash_info[i].size = A29LV641DH_SIZE; + flash_info[i].sector_count = A29LV641DH_SECTORS; + sectsize = A29LV641DH_SIZE/A29LV641DH_SECTORS; + printf("Bank %d: AMD 29LV641DH\n", i); + break; + + case 0x0001227E: + /* 29LV641MH */ + flash_info[i].flash_id = + (AMD_MANUFACT & FLASH_VENDMASK) | + (AMD_ID_DL640 & FLASH_TYPEMASK); + + flash_info[i].size = A29LV641MH_SIZE; + flash_info[i].sector_count = A29LV641MH_SECTORS; + sectsize = A29LV641MH_SIZE/A29LV641MH_SECTORS; + printf("Bank %d: AMD 29LV641MH\n", i); + break; + + case 0x00890016: + /* 28F320J3A */ + flash_info[i].flash_id = + (INTEL_MANUFACT & FLASH_VENDMASK) | + (INTEL_ID_28F320J3A & FLASH_TYPEMASK); + + flash_info[i].size = I28F320J3A_SIZE; + flash_info[i].sector_count = I28F320J3A_SECTORS; + sectsize = I28F320J3A_SIZE/I28F320J3A_SECTORS; + printf("Bank %d: Intel 28F320J3A\n", i); + break; + + case 0x00890017: + /* 28F640J3A */ + flash_info[i].flash_id = + (INTEL_MANUFACT & FLASH_VENDMASK) | + (INTEL_ID_28F640J3A & FLASH_TYPEMASK); + + flash_info[i].size = I28F640J3A_SIZE; + flash_info[i].sector_count = I28F640J3A_SECTORS; + sectsize = I28F640J3A_SIZE/I28F640J3A_SECTORS; + printf("Bank %d: Intel 28F640J3A\n", i); + break; + + case 0x00890018: + /* 28F128J3A */ + flash_info[i].flash_id = + (INTEL_MANUFACT & FLASH_VENDMASK) | + (INTEL_ID_28F128J3A & FLASH_TYPEMASK); + + flash_info[i].size = I28F128J3A_SIZE; + flash_info[i].sector_count = I28F128J3A_SECTORS; + sectsize = I28F128J3A_SIZE/I28F128J3A_SECTORS; + printf("Bank %d: Intel 28F128J3A\n", i); + break; + + default: + printf("Bank %d have unknown flash %08x\n", i, id); + flash_info[i].flash_id = FLASH_UNKNOWN; + continue; + } + + for (j = 0; j < flash_info[i].sector_count; j++) { + flash_info[i].start[j] = flashbase + j * sectsize; + } + size += flash_info[i].size; + + flash_protect(FLAG_PROTECT_CLEAR, + flash_info[i].start[0], + flash_info[i].start[0] + flash_info[i].size - 1, + &flash_info[i]); + } + + /* + * Protect monitor and environment sectors + */ + flash_protect(FLAG_PROTECT_SET, + i386boot_start, + i386boot_end, + &flash_info[0]); +#ifdef CFG_ENV_ADDR + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, + &flash_info[0]); +#endif + return size; +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info(flash_info_t *info) +{ + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case (INTEL_MANUFACT & FLASH_VENDMASK): + printf("INTEL: "); + switch (info->flash_id & FLASH_TYPEMASK) { + case (INTEL_ID_28F320J3A & FLASH_TYPEMASK): + printf("1x I28F320J3A (32Mbit)\n"); + break; + case (INTEL_ID_28F640J3A & FLASH_TYPEMASK): + printf("1x I28F640J3A (64Mbit)\n"); + break; + case (INTEL_ID_28F128J3A & FLASH_TYPEMASK): + printf("1x I28F128J3A (128Mbit)\n"); + break; + default: + printf("Unknown Chip Type\n"); + goto done; + break; + } + + break; + + case (AMD_MANUFACT & FLASH_VENDMASK): + printf("AMD: "); + switch (info->flash_id & FLASH_TYPEMASK) { + case (AMD_ID_LV640U & FLASH_TYPEMASK): + printf("1x AMD29LV641DH (64Mbit)\n"); + break; + case (AMD_ID_DL640 & FLASH_TYPEMASK): + printf("1x AMD29LV641MH (64Mbit)\n"); + break; + default: + printf("Unknown Chip Type\n"); + goto done; + break; + } + + break; + default: + printf("Unknown Vendor "); + break; + } + + + printf(" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + printf ("\n "); + } + printf (" %08lX%s", info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + + done: +} + +/*----------------------------------------------------------------------- + */ + + +static u32 _amd_erase_flash(u32 addr, u32 sector) +{ + unsigned elapsed; + + /* Issue erase */ + *(volatile u16*)(addr + 0xaaaa) = 0x00AA; + *(volatile u16*)(addr + 0x5554) = 0x0055; + *(volatile u16*)(addr + 0xaaaa) = 0x0080; + /* And one unlock */ + *(volatile u16*)(addr + 0xaaaa) = 0x00AA; + *(volatile u16*)(addr + 0x5554) = 0x0055; + /* Sector erase command comes last */ + *(volatile u16*)(addr + sector) = 0x0030; + + elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */ + elapsed = 0; + while (((*(volatile u16*)(addr + sector)) & 0x0080) != 0x0080) { + + elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); + if (elapsed > ((CFG_FLASH_ERASE_TOUT/CFG_HZ) * 1000)) { + *(volatile u16*)(addr) = 0x00f0; + return 1; + } + } + + *(volatile u16*)(addr) = 0x00f0; + + return 0; +} + +extern int _amd_erase_flash_end; +asm ("_amd_erase_flash_end:\n" + ".long 0\n"); + +/* this needs to be inlined, the SWTMRMMILLI register is reset by each read */ +#define __udelay(delay) \ +{ \ + unsigned micro; \ + unsigned milli=0; \ + \ + micro = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \ + \ + for (;;) { \ + \ + milli += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \ + micro = *(volatile u16*)(0xfffef000+SC520_SWTMRMICRO); \ + \ + if ((delay) <= (micro + (milli * 1000))) { \ + break; \ + } \ + } \ +} while (0) + +static u32 _intel_erase_flash(u32 addr, u32 sector) +{ + unsigned elapsed; + + *(volatile u16*)(addr + sector) = 0x0050; /* clear status register */ + *(volatile u16*)(addr + sector) = 0x0020; /* erase setup */ + *(volatile u16*)(addr + sector) = 0x00D0; /* erase confirm */ + + + /* Wait at least 80us - let's wait 1 ms */ + __udelay(1000); + + elapsed = 0; + while (((*(volatile u16*)(addr + sector)) & 0x0080) != 0x0080) { + elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); + if (elapsed > ((CFG_FLASH_ERASE_TOUT/CFG_HZ) * 1000)) { + *(volatile u16*)(addr + sector) = 0x00B0; /* suspend erase */ + *(volatile u16*)(addr + sector) = 0x00FF; /* reset to read mode */ + return 1; + } + } + + *(volatile u16*)(addr + sector) = 0x00FF; /* reset to read mode */ + + return 0; +} + + +extern int _intel_erase_flash_end; +asm ("_intel_erase_flash_end:\n" + ".long 0\n"); + +int flash_erase(flash_info_t *info, int s_first, int s_last) +{ + u32 (*_erase_flash_ptr)(u32 a, u32 so); + int prot; + int sect; + unsigned size; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf("- missing\n"); + } else { + printf("- no sectors to erase\n"); + } + return 1; + } + + if ((info->flash_id & FLASH_VENDMASK) == (AMD_MANUFACT & FLASH_VENDMASK)) { + size = (unsigned)&_amd_erase_flash_end - (unsigned)_amd_erase_flash; + + if (size > PROBE_BUFFER_SIZE) { + printf("_amd_erase_flash() routine too large (%d) %p - %p\n", + size, &_amd_erase_flash_end, _amd_erase_flash); + return 0; + } + + memcpy(buffer, _amd_erase_flash, size); + _erase_flash_ptr = (void*)buffer; + + } else if ((info->flash_id & FLASH_VENDMASK) == (INTEL_MANUFACT & FLASH_VENDMASK)) { + size = (unsigned)&_intel_erase_flash_end - (unsigned)_intel_erase_flash; + + if (size > PROBE_BUFFER_SIZE) { + printf("_intel_erase_flash() routine too large (%d) %p - %p\n", + size, &_intel_erase_flash_end, _intel_erase_flash); + return 0; + } + + memcpy(buffer, _intel_erase_flash, size); + _erase_flash_ptr = (void*)buffer; + } else { + printf ("Can't erase unknown flash type - aborted\n"); + return 1; + } + + prot = 0; + for (sect=s_first; sect<=s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", prot); + } else { + printf ("\n"); + } + + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect<=s_last; sect++) { + + if (info->protect[sect] == 0) { /* not protected */ + int res; + int flag; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + res = _erase_flash_ptr(info->start[0], info->start[sect]-info->start[0]); + + /* re-enable interrupts if necessary */ + if (flag) { + enable_interrupts(); + } + + + if (res) { + printf("Erase timed out, sector %d\n", sect); + return res; + } + + putc('.'); + } + } + + + return 0; +} + +/*----------------------------------------------------------------------- + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int _amd_write_word(unsigned start, unsigned dest, unsigned data) +{ + volatile u16 *addr2 = (u16*)start; + volatile u16 *dest2 = (u16*)dest; + volatile u16 *data2 = (u16*)&data; + int i; + unsigned elapsed; + + /* Check if Flash is (sufficiently) erased */ + if ((*((volatile u16*)dest) & (u16)data) != (u16)data) { + return 2; + } + + for (i = 0; i < 2; i++) { + + + addr2[0x5555] = 0x00AA; + addr2[0x2aaa] = 0x0055; + addr2[0x5555] = 0x00A0; + + dest2[i] = (data >> (i*16)) & 0xffff; + + elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */ + elapsed = 0; + + /* data polling for D7 */ + while ((dest2[i] & 0x0080) != (data2[i] & 0x0080)) { + elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); + if (elapsed > ((CFG_FLASH_WRITE_TOUT/CFG_HZ) * 1000)) { + addr2[i] = 0x00f0; + return 1; + } + } + } + + addr2[i] = 0x00f0; + + return 0; +} + +extern int _amd_write_word_end; +asm ("_amd_write_word_end:\n" + ".long 0\n"); + + + +static int _intel_write_word(unsigned start, unsigned dest, unsigned data) +{ + int i; + unsigned elapsed; + + /* Check if Flash is (sufficiently) erased */ + if ((*((volatile u16*)dest) & (u16)data) != (u16)data) { + return 2; + } + + for (i = 0; i < 2; i++) { + + *(volatile u16*)(dest+2*i) = 0x0040; /* write setup */ + *(volatile u16*)(dest+2*i) = (data >> (i*16)) & 0xffff; + + elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */ + elapsed = 0; + + /* data polling for D7 */ + while ((*(volatile u16*)dest & 0x0080) != 0x0080) { + elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); + if (elapsed > ((CFG_FLASH_WRITE_TOUT/CFG_HZ) * 1000)) { + *(volatile u16*)dest = 0x00ff; + return 1; + } + } + } + + *(volatile u16*)dest = 0x00ff; + + + return 0; + +} + +extern int _intel_write_word_end; +asm ("_intel_write_word_end:\n" + ".long 0\n"); + + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + * 3 - Unsupported flash type + */ + +int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int i, l, rc; + int flag; + u32 (*_write_word_ptr)(unsigned start, unsigned dest, unsigned data); + unsigned size; + + if ((info->flash_id & FLASH_VENDMASK) == (AMD_MANUFACT & FLASH_VENDMASK)) { + size = (unsigned)&_amd_write_word_end - (unsigned)_amd_write_word; + + if (size > PROBE_BUFFER_SIZE) { + printf("_amd_write_word() routine too large (%d) %p - %p\n", + size, &_amd_write_word_end, _amd_write_word); + return 0; + } + + memcpy(buffer, _amd_write_word, size); + _write_word_ptr = (void*)buffer; + + } else if ((info->flash_id & FLASH_VENDMASK) == (INTEL_MANUFACT & FLASH_VENDMASK)) { + size = (unsigned)&_intel_write_word_end - (unsigned)_intel_write_word; + + if (size > PROBE_BUFFER_SIZE) { + printf("_intel_write_word() routine too large (%d) %p - %p\n", + size, &_intel_write_word_end, _intel_write_word); + return 0; + } + + memcpy(buffer, _intel_write_word, size); + _write_word_ptr = (void*)buffer; + } else { + printf ("Can't program unknown flash type - aborted\n"); + return 3; + } + + + wp = (addr & ~3); /* get lower word aligned address */ + + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i=0, cp=wp; i0; ++i) { + data |= *src++ << (8*i); + --cnt; + ++cp; + } + for (; cnt==0 && i<4; ++i, ++cp) { + data |= (*(uchar *)cp) << (8*i); + } + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + rc = _write_word_ptr(info->start[0], wp, data); + + /* re-enable interrupts if necessary */ + if (flag) { + enable_interrupts(); + } + if (rc != 0) { + return rc; + } + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + + for (i=0; i<4; ++i) { + data |= *src++ << (8*i); + } + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + rc = _write_word_ptr(info->start[0], wp, data); + + /* re-enable interrupts if necessary */ + if (flag) { + enable_interrupts(); + } + if (rc != 0) { + return rc; + } + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + return 0; + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { + data |= *src++ << (8*i); + --cnt; + } + + for (; i<4; ++i, ++cp) { + data |= (*(uchar *)cp) << (8*i); + } + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + rc = _write_word_ptr(info->start[0], wp, data); + + /* re-enable interrupts if necessary */ + if (flag) { + enable_interrupts(); + } + + return rc; + +} + + diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c new file mode 100644 index 0000000..962e04e --- /dev/null +++ b/board/sc520_spunk/sc520_spunk.c @@ -0,0 +1,686 @@ +/* + * + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB . + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + + +/* ------------------------------------------------------------------------- */ + + +/* + * Theory: + * We first set up all IRQs to be non-pci, edge triggered, + * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets + * called we reallocate irqs to the pci bus with sc520_pci_set_irq() + * as needed. Whe choose the irqs to gram from a configurable list + * inside pci_sc520_fixup_irq() (If this list contains stupid irq's + * such as 0 thngas will not work) + */ + +static void irq_init(void) +{ + /* disable global interrupt mode */ + write_mmcr_byte(SC520_PICICR, 0x40); + + /* set all irqs to edge */ + write_mmcr_byte(SC520_MPICMODE, 0x00); + write_mmcr_byte(SC520_SL1PICMODE, 0x00); + write_mmcr_byte(SC520_SL2PICMODE, 0x00); + + /* active low polarity on PIC interrupt pins, + * active high polarity on all other irq pins */ + write_mmcr_word(SC520_INTPINPOL, 0x0000); + + /* set irq number mapping */ + write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */ + write_mmcr_byte(SC520_GPTMR1MAP, SC520_IRQ_DISABLED); /* disable GP timer 1 INT */ + write_mmcr_byte(SC520_GPTMR2MAP, SC520_IRQ_DISABLED); /* disable GP timer 2 INT */ + write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */ + write_mmcr_byte(SC520_PIT1MAP, SC520_IRQ_DISABLED); /* disable PIT timer 1 INT */ + write_mmcr_byte(SC520_PIT2MAP, SC520_IRQ_DISABLED); /* disable PIT timer 2 INT */ + write_mmcr_byte(SC520_PCIINTAMAP, SC520_IRQ_DISABLED); /* disable PCI INT A */ + write_mmcr_byte(SC520_PCIINTBMAP, SC520_IRQ_DISABLED); /* disable PCI INT B */ + write_mmcr_byte(SC520_PCIINTCMAP, SC520_IRQ_DISABLED); /* disable PCI INT C */ + write_mmcr_byte(SC520_PCIINTDMAP, SC520_IRQ_DISABLED); /* disable PCI INT D */ + write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */ + write_mmcr_byte(SC520_SSIMAP, SC520_IRQ6); /* Set Synchronius serial INT to IRQ6*/ + write_mmcr_byte(SC520_WDTMAP, SC520_IRQ_DISABLED); /* disable Watchdog INT */ + write_mmcr_byte(SC520_RTCMAP, SC520_IRQ8); /* Set RTC int to 8 */ + write_mmcr_byte(SC520_WPVMAP, SC520_IRQ_DISABLED); /* disable write protect INT */ + write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1); /* Set ICE Debug Serielport INT to IRQ1 */ + write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13); /* Set FP error INT to IRQ13 */ + + write_mmcr_byte(SC520_UART1MAP, SC520_IRQ4); /* Set internal UART2 INT to IRQ4 */ + write_mmcr_byte(SC520_UART2MAP, SC520_IRQ3); /* Set internal UART2 INT to IRQ3 */ + + write_mmcr_byte(SC520_GP0IMAP, SC520_IRQ7); /* Set GPIRQ0 (PC-Card AUX IRQ) to IRQ7 */ + write_mmcr_byte(SC520_GP1IMAP, SC520_IRQ14); /* Set GPIRQ1 (CF IRQ) to IRQ14 */ + write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ5); /* Set GPIRQ3 ( CAN IRQ ) ti IRQ5 */ + write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ_DISABLED); /* disbale GIRQ4 ( IRR IRQ ) */ + write_mmcr_byte(SC520_GP5IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ5 */ + write_mmcr_byte(SC520_GP6IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ6 */ + write_mmcr_byte(SC520_GP7IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ7 */ + write_mmcr_byte(SC520_GP8IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ8 */ + write_mmcr_byte(SC520_GP9IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ9 */ + write_mmcr_byte(SC520_GP2IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ2 */ + write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ_DISABLED); /* disable GPIRQ10 */ + + write_mmcr_word(SC520_PCIHOSTMAP, 0x11f); /* Map PCI hostbridge INT to NMI */ + write_mmcr_word(SC520_ECCMAP, 0x100); /* Map SDRAM ECC failure INT to NMI */ + +} + + +/* PCI stuff */ +static void pci_sc520_spunk_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +{ + int version = read_mmcr_byte(SC520_SYSINFO); + + /* a configurable lists of irqs to steal + * when we need one (a board with more pci interrupt pins + * would use a larger table */ + static int irq_list[] = { + CFG_FIRST_PCI_IRQ, + CFG_SECOND_PCI_IRQ, + CFG_THIRD_PCI_IRQ, + CFG_FORTH_PCI_IRQ + }; + static int next_irq_index=0; + + char tmp_pin; + int pin; + + pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin); + pin = tmp_pin; + + pin-=1; /* pci config space use 1-based numbering */ + if (-1 == pin) { + return; /* device use no irq */ + } + + + + /* map device number + pin to a pin on the sc520 */ + switch (PCI_DEV(dev)) { + case 6: /* ETH0 */ + pin+=SC520_PCI_INTA; + break; + + case 7: /* ETH1 */ + pin+=SC520_PCI_INTB; + break; + + case 8: /* Crypto */ + pin+=SC520_PCI_INTC; + break; + + case 9: /* PMC slot */ + pin+=SC520_PCI_INTD; + break; + + case 10: /* PC-Card */ + + if (version < 10) { + pin+=SC520_PCI_INTD; + } else { + pin+=SC520_PCI_INTC; + } + break; + + default: + return; + } + + pin&=3; /* wrap around */ + + if (sc520_pci_ints[pin] == -1) { + /* re-route one interrupt for us */ + if (next_irq_index > 3) { + return; + } + if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) { + return; + } + next_irq_index++; + } + + + if (-1 != sc520_pci_ints[pin]) { + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, + sc520_pci_ints[pin]); + } +#if 0 + printf("fixup_irq: device %d pin %c irq %d\n", + PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]); +#endif +} + + +static void pci_sc520_spunk_configure_cardbus(struct pci_controller *hose, + pci_dev_t dev, struct pci_config_table *te) +{ + u32 io_base; + u32 temp; + + pciauto_config_device(hose, dev); + + pci_hose_write_config_word(hose, dev, PCI_COMMAND, 0x07); /* enable device */ + pci_hose_write_config_byte(hose, dev, 0x0c, 0x10); /* cacheline size */ + pci_hose_write_config_byte(hose, dev, 0x0d, 0x40); /* latency timer */ + pci_hose_write_config_byte(hose, dev, 0x1b, 0x40); /* cardbus latency timer */ + pci_hose_write_config_word(hose, dev, PCI_BRIDGE_CONTROL, 0x0040); /* reset cardbus */ + pci_hose_write_config_word(hose, dev, PCI_BRIDGE_CONTROL, 0x0080); /* route interrupts though ExCA */ + pci_hose_write_config_word(hose, dev, 0x44, 0x3e0); /* map legacy I/O port to 0x3e0 */ + + pci_hose_read_config_dword(hose, dev, 0x80, &temp); /* System control */ + pci_hose_write_config_dword(hose, dev, 0x80, temp | 0x60); /* System control: disable clockrun */ + /* route MF0 to ~INT and MF3 to IRQ7 + * reserve all others */ + pci_hose_write_config_dword(hose, dev, 0x8c, 0x00007002); + pci_hose_write_config_byte(hose, dev, 0x91, 0x00); /* card control */ + pci_hose_write_config_byte(hose, dev, 0x92, 0x62); /* device control */ + + if (te->device != 0xac56) { + pci_hose_write_config_byte(hose, dev, 0x93, 0x21); /* async interrupt enable */ + pci_hose_write_config_word(hose, dev, 0xa8, 0x0000); /* reset GPIO */ + pci_hose_write_config_word(hose, dev, 0xac, 0x0000); /* reset GPIO */ + pci_hose_write_config_word(hose, dev, 0xaa, 0x0000); /* reset GPIO */ + pci_hose_write_config_word(hose, dev, 0xae, 0x0000); /* reset GPIO */ + } else { + pci_hose_write_config_byte(hose, dev, 0x93, 0x20); /* */ + } + pci_hose_write_config_word(hose, dev, 0xa4, 0x8000); /* reset power management */ + + + pci_hose_read_config_dword(hose, dev, PCI_BASE_ADDRESS_0, &io_base); + io_base &= ~0xfL; + + writeb(0x07, io_base+0x803); /* route CSC irq though ExCA and enable IRQ7 */ + writel(0, io_base+0x10); /* CLKRUN default */ + writel(0, io_base+0x20); /* CLKRUN default */ + +} + + + +static struct pci_config_table pci_sc520_spunk_config_table[] = { + { 0x104c, 0xac50, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} }, + { 0x104c, 0xac56, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} }, + { 0, 0, 0, 0, 0, 0, NULL, {0,0,0}} +}; + +static struct pci_controller sc520_spunk_hose = { + fixup_irq: pci_sc520_spunk_fixup_irq, + config_table: pci_sc520_spunk_config_table, + first_busno: 0x00, + last_busno: 0xff, +}; + +void pci_init_board(void) +{ + pci_sc520_init(&sc520_spunk_hose); +} + + +/* set up the ISA bus timing and system address mappings */ +static void bus_init(void) +{ + /* versions + * 0 Hyglo versions 0.95 and 0.96 (large baords) + * ?? Hyglo version 0.97 (small board) + * 10 Spunk board + */ + int version = read_mmcr_byte(SC520_SYSINFO); + + if (version) { + /* set up the GP IO pins (for the Spunk board) */ + write_mmcr_word(SC520_PIOPFS31_16, 0xfff0); /* set the GPIO pin function 31-16 reg */ + write_mmcr_word(SC520_PIOPFS15_0, 0x000f); /* set the GPIO pin function 15-0 reg */ + write_mmcr_word(SC520_PIODIR31_16, 0x000f); /* set the GPIO direction 31-16 reg */ + write_mmcr_word(SC520_PIODIR15_0, 0x1ff0); /* set the GPIO direction 15-0 reg */ + write_mmcr_byte(SC520_CSPFS, 0xc0); /* set the CS pin function reg */ + write_mmcr_byte(SC520_CLKSEL, 0x70); + + write_mmcr_word(SC520_PIOCLR31_16, 0x0003); /* reset SSI chip-selects */ + write_mmcr_word(SC520_PIOSET31_16, 0x000c); + + } else { + /* set up the GP IO pins (for the Hyglo board) */ + write_mmcr_word(SC520_PIOPFS31_16, 0xffc0); /* set the GPIO pin function 31-16 reg */ + write_mmcr_word(SC520_PIOPFS15_0, 0x1e7f); /* set the GPIO pin function 15-0 reg */ + write_mmcr_word(SC520_PIODIR31_16, 0x003f); /* set the GPIO direction 31-16 reg */ + write_mmcr_word(SC520_PIODIR15_0, 0xe180); /* set the GPIO direction 15-0 reg */ + write_mmcr_byte(SC520_CSPFS, 0x00); /* set the CS pin function reg */ + write_mmcr_byte(SC520_CLKSEL, 0x70); + + write_mmcr_word(SC520_PIOCLR15_0, 0x0180); /* reset SSI chip-selects */ + } + + write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */ + write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */ + write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */ + write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */ + write_mmcr_byte(SC520_GPRDOFF, 1); /* set the GP RD offset */ + write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */ + write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */ + + write_mmcr_word(SC520_BOOTCSCTL, 0x0407); /* set up timing of BOOTCS */ + + /* adjust the memory map: + * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM + * and 256MB to 1G-128k (0x1000000 - 0x37ffffff) is mapped to PCI mmio + * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */ + + + + /* bootcs */ + write_mmcr_long(SC520_PAR12, 0x8bffe800); + + /* IDE0 = GPCS6 1f0-1f7 */ + write_mmcr_long(SC520_PAR3, 0x380801f0); + + /* IDE1 = GPCS7 3f6 */ + write_mmcr_long(SC520_PAR4, 0x3c0003f6); + + asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */ + + write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS)); + +} + + + +/* par usage: + * PAR0 (legacy_video) + * PAR1 (PCI ROM mapping) + * PAR2 + * PAR3 IDE + * PAR4 IDE + * PAR5 (legacy_video) + * PAR6 + * PAR7 (legacy_video) + * PAR8 (legacy_video) + * PAR9 (legacy_video) + * PAR10 + * PAR11 (ISAROM) + * PAR12 BOOTCS + * PAR13 + * PAR14 + * PAR15 + */ + +/* + * This function should map a chunk of size bytes + * of the system address space to the ISA bus + * + * The function will return the memory address + * as seen by the host (which may very will be the + * same as the bus address) + */ +u32 isa_map_rom(u32 bus_addr, int size) +{ + u32 par; + + printf("isa_map_rom asked to map %d bytes at %x\n", + size, bus_addr); + + par = size; + if (par < 0x80000) { + par = 0x80000; + } + par >>= 12; + par--; + par&=0x7f; + par <<= 18; + par |= (bus_addr>>12); + par |= 0x50000000; + + printf ("setting PAR11 to %x\n", par); + + /* Map rom 0x10000 with PAR1 */ + write_mmcr_long(SC520_PAR11, par); + + return bus_addr; +} + +/* + * this function removed any mapping created + * with pci_get_rom_window() + */ +void isa_unmap_rom(u32 addr) +{ + printf("isa_unmap_rom asked to unmap %x", addr); + if ((addr>>12) == (read_mmcr_long(SC520_PAR11)&0x3ffff)) { + write_mmcr_long(SC520_PAR11, 0); + printf(" done\n"); + return; + } + printf(" not ours\n"); +} + +#ifdef CONFIG_PCI +#define PCI_ROM_TEMP_SPACE 0x10000 +/* + * This function should map a chunk of size bytes + * of the system address space to the PCI bus, + * suitable to map PCI ROMS (bus address < 16M) + * the function will return the host memory address + * which should be converted into a bus address + * before used to configure the PCI rom address + * decoder + */ +u32 pci_get_rom_window(struct pci_controller *hose, int size) +{ + u32 par; + + par = size; + if (par < 0x80000) { + par = 0x80000; + } + par >>= 16; + par--; + par&=0x7ff; + par <<= 14; + par |= (PCI_ROM_TEMP_SPACE>>16); + par |= 0x72000000; + + printf ("setting PAR1 to %x\n", par); + + /* Map rom 0x10000 with PAR1 */ + write_mmcr_long(SC520_PAR1, par); + + return PCI_ROM_TEMP_SPACE; +} + +/* + * this function removed any mapping created + * with pci_get_rom_window() + */ +void pci_remove_rom_window(struct pci_controller *hose, u32 addr) +{ + printf("pci_remove_rom_window: %x", addr); + if (addr == PCI_ROM_TEMP_SPACE) { + write_mmcr_long(SC520_PAR1, 0); + printf(" done\n"); + return; + } + printf(" not ours\n"); + +} + +/* + * This function is called in order to provide acces to the + * legacy video I/O ports on the PCI bus. + * After this function accesses to I/O ports 0x3b0-0x3bb and + * 0x3c0-0x3df shuld result in transactions on the PCI bus. + * + */ +int pci_enable_legacy_video_ports(struct pci_controller *hose) +{ + /* Map video memory to 0xa0000*/ + write_mmcr_long(SC520_PAR0, 0x7200400a); + + /* forward all I/O accesses to PCI */ + write_mmcr_byte(SC520_ADDDECCTL, + read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI); + + + /* so we map away all io ports to pci (only way to access pci io + * below 0x400. But then we have to map back the portions that we dont + * use so that the generate cycles on the GPIO bus where the sio and + * ISA slots are connected, this requre the use of several PAR registers + */ + + /* bring 0x100 - 0x2f7 back to ISA using PAR5 */ + write_mmcr_long(SC520_PAR5, 0x31f70100); + + /* com2 use 2f8-2ff */ + + /* bring 0x300 - 0x3af back to ISA using PAR7 */ + write_mmcr_long(SC520_PAR7, 0x30af0300); + + /* vga use 3b0-3bb */ + + /* bring 0x3bc - 0x3bf back to ISA using PAR8 */ + write_mmcr_long(SC520_PAR8, 0x300303bc); + + /* vga use 3c0-3df */ + + /* bring 0x3e0 - 0x3f7 back to ISA using PAR9 */ + write_mmcr_long(SC520_PAR9, 0x301703e0); + + /* com1 use 3f8-3ff */ + + return 0; +} +#endif + +/* + * Miscelaneous platform dependent initialisations + */ + +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + init_sc520(); + bus_init(); + irq_init(); + + /* max drive current on SDRAM */ + write_mmcr_word(SC520_DSCTL, 0x0100); + + /* enter debug mode after next reset (only if jumper is also set) */ + write_mmcr_byte(SC520_RESCFG, 0x08); + /* configure the software timer to 33.000MHz */ + write_mmcr_byte(SC520_SWTMRCFG, 1); + gd->bus_clk = 33000000; + + return 0; +} + +int dram_init(void) +{ + init_sc520_dram(); + return 0; +} + +void show_boot_progress(int val) +{ + int version = read_mmcr_byte(SC520_SYSINFO); + + if (version == 0) { + /* PIO31-PIO16 Data */ + write_mmcr_word(SC520_PIODATA31_16, + (read_mmcr_word(SC520_PIODATA31_16) & 0xffc0)| ((val&0x7e)>>1)); /* 0x1f8 >> 3 */ + + /* PIO0-PIO15 Data */ + write_mmcr_word(SC520_PIODATA15_0, + (read_mmcr_word(SC520_PIODATA15_0) & 0x1fff)| ((val&0x7)<<13)); + } else { + /* newer boards use PIO4-PIO12 */ + /* PIO0-PIO15 Data */ +#if 0 + val = (val & 0x007) | ((val & 0x038) << 3) | ((val & 0x1c0) >> 3); +#else + val = (val & 0x007) | ((val & 0x07e) << 2); +#endif + write_mmcr_word(SC520_PIODATA15_0, + (read_mmcr_word(SC520_PIODATA15_0) & 0xe00f) | ((val&0x01ff)<<4)); + } +} + + +int last_stage_init(void) +{ + + int version = read_mmcr_byte(SC520_SYSINFO); + + printf("Omicron Ceti SC520 Spunk revision %x\n", version); + +#if 0 + if (version) { + int x, y; + + printf("eeprom probe %d\n", spi_eeprom_probe(1)); + + spi_eeprom_read(1, 0, (u8*)&x, 2); + spi_eeprom_read(1, 1, (u8*)&y, 2); + printf("eeprom bytes %04x%04x\n", x, y); + x ^= 0xffff; + y ^= 0xffff; + spi_eeprom_write(1, 0, (u8*)&x, 2); + spi_eeprom_write(1, 1, (u8*)&y, 2); + + spi_eeprom_read(1, 0, (u8*)&x, 2); + spi_eeprom_read(1, 1, (u8*)&y, 2); + printf("eeprom bytes %04x%04x\n", x, y); + + } else { + int x, y; + + printf("eeprom probe %d\n", mw_eeprom_probe(1)); + + mw_eeprom_read(1, 0, (u8*)&x, 2); + mw_eeprom_read(1, 1, (u8*)&y, 2); + printf("eeprom bytes %04x%04x\n", x, y); + + x ^= 0xffff; + y ^= 0xffff; + mw_eeprom_write(1, 0, (u8*)&x, 2); + mw_eeprom_write(1, 1, (u8*)&y, 2); + + mw_eeprom_read(1, 0, (u8*)&x, 2); + mw_eeprom_read(1, 1, (u8*)&y, 2); + printf("eeprom bytes %04x%04x\n", x, y); + + + } +#endif + + ds1722_probe(2); + + return 0; +} + +void ssi_chip_select(int dev) +{ + int version = read_mmcr_byte(SC520_SYSINFO); + + if (version) { + /* Spunk board: EEPROM and CAN are actove-low, TEMP and AUX are active high */ + switch (dev) { + case 1: /* EEPROM */ + write_mmcr_word(SC520_PIOCLR31_16, 0x0004); + break; + + case 2: /* Temp Probe */ + write_mmcr_word(SC520_PIOSET31_16, 0x0002); + break; + + case 3: /* CAN */ + write_mmcr_word(SC520_PIOCLR31_16, 0x0008); + break; + + case 4: /* AUX */ + write_mmcr_word(SC520_PIOSET31_16, 0x0001); + break; + + case 0: + write_mmcr_word(SC520_PIOCLR31_16, 0x0003); + write_mmcr_word(SC520_PIOSET31_16, 0x000c); + break; + + default: + printf("Illegal SSI device requested: %d\n", dev); + } + } else { + + /* Globox board: Both EEPROM and TEMP are active-high */ + + switch (dev) { + case 1: /* EEPROM */ + write_mmcr_word(SC520_PIOSET15_0, 0x0100); + break; + + case 2: /* Temp Probe */ + write_mmcr_word(SC520_PIOSET15_0, 0x0080); + break; + + case 0: + write_mmcr_word(SC520_PIOCLR15_0, 0x0180); + break; + + default: + printf("Illegal SSI device requested: %d\n", dev); + } + } +} + + +void spi_init_f(void) +{ + read_mmcr_byte(SC520_SYSINFO) ? + spi_eeprom_probe(1) : + mw_eeprom_probe(1); + +} + +ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) +{ + int offset; + int i; + + offset = 0; + for (i=0;i. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* now setup the General purpose bus to give us access to the LEDs. + * We can then use the leds to display status information. + */ + +sc520_cdp_registers: +/* size offset value */ +.word 1 ; .word 0x040 ; .long 0x00 /* SDRAM buffer control */ +.word 2 ; .word 0xc08 ; .long 0x0001 /* GP CS offset */ +.word 2 ; .word 0xc09 ; .long 0x0003 /* GP CS width */ +.word 2 ; .word 0xc0a ; .long 0x0001 /* GP CS width */ +.word 2 ; .word 0xc0b ; .long 0x0003 /* GP RD pulse width */ +.word 2 ; .word 0xc0c ; .long 0x0001 /* GP RD offse */ +.word 2 ; .word 0xc0d ; .long 0x0003 /* GP WR pulse width */ +.word 2 ; .word 0xc0e ; .long 0x0001 /* GP WR offset */ +.word 2 ; .word 0xc2c ; .long 0x003f /* GPIO directionreg 31-16 */ +.word 2 ; .word 0xc2a ; .long 0xe000 /* GPIO directionreg 15-0 */ +.word 2 ; .word 0xc22 ; .long 0xffc0 /* GPIO pin function 31-16 reg */ +.word 2 ; .word 0xc20 ; .long 0x1fff /* GPIO pin function 15-0 reg */ +.word 0 ; .word 0x000 ; .long 0x00 + +/* board early intialization */ +.globl early_board_init +early_board_init: + movl $sc520_cdp_registers,%esi +init_loop: + movl $0xfffef000,%edi /* MMCR base to edi */ + movw (%esi), %bx /* load size to bx */ + cmpw $0, %bx /* if size is 0 we're done */ + je done + xorl %edx,%edx + movw 2(%esi), %dx /* load MMCR offset to dx */ + addl %edx, %edi /* add offset to base in edi */ + movl 4(%esi), %eax /* load value in eax */ + cmpw $1, %bx + je byte /* byte op? */ + cmpw $2, %bx + je word /* word op? */ + movl %eax, (%edi) /* must be long, then */ + jmp next +byte: movb %al,(%edi) + jmp next +word: movw %ax,(%edi) +next: addl $8, %esi /* advance esi */ + jmp init_loop + + /* light all leds */ +done: movl $0xfffefc32,%edx + movw $0000,(%edx) + + jmp *%ebp /* return to caller */ + + +.globl __show_boot_progress +__show_boot_progress: + movl $0xfffefc32,%edx + xorw $0xffff, %ax + movw %ax,(%edx) + jmp *%ebp + diff --git a/board/sc520_spunk/sc520_spunk_asm16.S b/board/sc520_spunk/sc520_spunk_asm16.S new file mode 100644 index 0000000..cdcbbbe --- /dev/null +++ b/board/sc520_spunk/sc520_spunk_asm16.S @@ -0,0 +1,84 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB . + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * 16bit initialization code. + * This code have to map the area of the boot flash + * that is used by U-boot to its final destination. + */ + +.text +.section .start16, "ax" +.code16 +.globl board_init16 +board_init16: + /* Alias MMCR to 0xdf000 */ + movw $0xfffc, %dx + movl $0x800df0cb, %eax + outl %eax, %dx + + /* Set ds to point to MMCR alias */ + movw $0xdf00, %ax + movw %ax, %ds + + /* Map the entire flash at 0x38000000 + * (with BOOTCS and PAR14, use 0xabfff800 for ROMCS1) */ + movl $0xc0, %edi + movl $0x8bfff800, %eax + movl %eax, (%di) + + /* Disable SDRAM write buffer */ + movw $0x40,%di + xorw %ax,%ax + movb %al, (%di) + + /* Disabe MMCR alias */ + movw $0xfffc, %dx + movl $0x000000cb, %eax + outl %eax, %dx + + /* the return address is stored in bp */ + jmp *%bp + + +.section .bios, "ax" +.code16 +.globl realmode_reset +realmode_reset: + /* Alias MMCR to 0xdf000 */ + movw $0xfffc, %dx + movl $0x800df0cb, %eax + outl %eax, %dx + + /* Set ds to point to MMCR alias */ + movw $0xdf00, %ax + movw %ax, %ds + + /* issue software reset thorugh MMCR */ + movl $0xd72, %edi + movb $0x01, %al + movb %al, (%di) + +1: hlt + jmp 1 + diff --git a/board/sc520_spunk/u-boot.lds b/board/sc520_spunk/u-boot.lds new file mode 100644 index 0000000..fbab9b8 --- /dev/null +++ b/board/sc520_spunk/u-boot.lds @@ -0,0 +1,85 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") +OUTPUT_ARCH(i386) +ENTRY(_start) + +SECTIONS +{ + . = 0x387c0000; /* Where bootcode in the flash is mapped */ + .text : { *(.text); } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = 0x400000; /* Ram data segment to use */ + _i386boot_romdata_dest = ABSOLUTE(.); + .data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) } + _i386boot_romdata_start = LOADADDR(.data); + + . = ALIGN(4); + .got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) } + _i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got); + + + . = ALIGN(4); + _i386boot_bss_start = ABSOLUTE(.); + .bss : { *(.bss) } + _i386boot_bss_size = SIZEOF(.bss); + + + /* 16bit realmode trampoline code */ + .realmode 0x7c0 : AT ( LOADADDR(.got) + SIZEOF(.got) ) { *(.realmode) } + + _i386boot_realmode = LOADADDR(.realmode); + _i386boot_realmode_size = SIZEOF(.realmode); + + /* 16bit BIOS emulation code (just enough to boot Linux) */ + .bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { *(.bios) } + + _i386boot_bios = LOADADDR(.bios); + _i386boot_bios_size = SIZEOF(.bios); + + + /* The load addresses below assumes that the flash + * will be mapped so that 0x387f0000 == 0xffff0000 + * at reset time + * + * The fe00 and ff00 offsets of the start32 and start16 + * segments are arbitrary, the just have to be mapped + * at reset and the code have to fit. + * The fff0 offset of reset is important, however. + */ + + + . = 0xfffffe00; + .start32 : AT (0x387ffe00) { *(.start32); } + + . = 0xff00; + .start16 : AT (0x387fff00) { *(.start16); } + + . = 0xfff0; + .reset : AT (0x387ffff0) { *(.reset); } + _i386boot_end = (LOADADDR(.reset) + SIZEOF(.reset) ); +} -- cgit v1.1