* Patch by Daniel Engström, 13 Nov 2002:

  Add support for i386 architecture and AMD SC520 board

* Patch by Pierre Aubert, 12 Nov 2002:
  Add support for DOS filesystem and booting from DOS floppy disk

1 files changed, 288 insertions, 0 deletions

diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c
new file mode 100644
index 0000000..cc818d2
--- /dev/null
+++ b/board/sc520_cdp/sc520_cdp.c
@@ -0,0 +1,288 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/ic/sc520.h>
+#include <asm/ic/ali512x.h>
+
+/* ------------------------------------------------------------------------- */
+
+static void irq_init(void)
+{
+	
+	/* disable global interrupt mode */
+	write_mmcr_byte(SC520_PICICR, 0x40); 
+	
+	/* set irq0-7 to edge */
+	write_mmcr_byte(SC520_MPICMODE, 0x00);
+	
+	/* set irq9-12 to level, all the other (8, 13-15) are edge */
+	write_mmcr_byte(SC520_SL1PICMODE, 0x1e);
+	
+	/* set irq16-24 (unused slave pic2) to level */
+	write_mmcr_byte(SC520_SL2PICMODE, 0xff);
+	
+	/* active low polarity on PIC interrupt pins, 
+	   active high polarity on all other irq pins */
+	write_mmcr_word(SC520_INTPINPOL, 0);
+
+	/* set irq number mapping */
+	write_mmcr_byte(SC520_GPTMR0MAP,0);            /* disable GP timer 0 INT */       
+	write_mmcr_byte(SC520_GPTMR1MAP,0);            /* disable GP timer 1 INT */
+	write_mmcr_byte(SC520_GPTMR2MAP,0);            /* disable GP timer 2 INT */
+	write_mmcr_byte(SC520_PIT0MAP,0x1);            /* Set PIT timer 0 INT to IRQ0 */ 
+	write_mmcr_byte(SC520_PIT1MAP,0);              /* diable PIT timer 1 INT */
+	write_mmcr_byte(SC520_PIT2MAP,0);              /* diable PIT timer 2 INT */
+	write_mmcr_byte(SC520_PCIINTAMAP,0x4);         /* Set PCI INT A to IRQ9 */
+	write_mmcr_byte(SC520_PCIINTBMAP,0x5);         /* Set PCI INT B to IRQ10 */
+	write_mmcr_byte(SC520_PCIINTCMAP,0x6);         /* Set PCI INT C to IRQ11 */
+	write_mmcr_byte(SC520_PCIINTDMAP,0x7);         /* Set PCI INT D to IRQ12 */
+	write_mmcr_byte(SC520_DMABCINTMAP,0);          /* disable DMA INT */ 
+	write_mmcr_byte(SC520_SSIMAP,0);               /* disable Synchronius serial INT */
+	write_mmcr_byte(SC520_WDTMAP,0);               /* disable Watchdor INT */
+	write_mmcr_byte(SC520_RTCMAP,0x3);             /* Set RTC int to 8 */
+	write_mmcr_byte(SC520_WPVMAP,0);               /* disable write protect INT */
+	write_mmcr_byte(SC520_ICEMAP,0x2);             /* Set ICE Debug Serielport INT to IRQ1 */
+	write_mmcr_byte(SC520_FERRMAP,0x8);            /* Set FP error INT to IRQ13 */
+	write_mmcr_byte(SC520_GP0IMAP,6);              /* Set GPIRQ0 (ISA IRQ2) to IRQ9 */
+	write_mmcr_byte(SC520_GP1IMAP,2);              /* Set GPIRQ1 (SIO IRQ1) to IRQ1 */
+	write_mmcr_byte(SC520_GP2IMAP,7);              /* Set GPIRQ2 (ISA IRQ12) to IRQ12 */
+	
+	if (CFG_USE_SIO_UART) {
+		write_mmcr_byte(SC520_UART1MAP,0);     /* disable internal UART1 INT */
+		write_mmcr_byte(SC520_UART2MAP,0);     /* disable internal UART2 INT */
+		write_mmcr_byte(SC520_GP3IMAP,11);     /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */ 
+		write_mmcr_byte(SC520_GP4IMAP,12);     /* Set GPIRQ4 (ISA IRQ4) to IRQ4 */
+	} else {
+		write_mmcr_byte(SC520_UART1MAP,12);    /* Set internal UART2 INT to IRQ4 */
+		write_mmcr_byte(SC520_UART2MAP,11);    /* Set internal UART2 INT to IRQ3 */
+		write_mmcr_byte(SC520_GP3IMAP,0);      /* disable GPIRQ3 (ISA IRQ3) */ 
+		write_mmcr_byte(SC520_GP4IMAP,0);      /* disable GPIRQ4 (ISA IRQ4) */
+	}
+	
+	write_mmcr_byte(SC520_GP5IMAP,13);             /* Set GPIRQ5 (ISA IRQ5) to IRQ5 */
+	write_mmcr_byte(SC520_GP6IMAP,21);             /* Set GPIRQ6 (ISA IRQ6) to IRQ6 */
+	write_mmcr_byte(SC520_GP7IMAP,22);             /* Set GPIRQ7 (ISA IRQ7) to IRQ7 */
+	write_mmcr_byte(SC520_GP8IMAP,3);              /* Set GPIRQ8 (SIO IRQ8) to IRQ8 */
+	write_mmcr_byte(SC520_GP9IMAP,4);              /* Set GPIRQ9 (ISA IRQ9) to IRQ9 */
+	write_mmcr_byte(SC520_GP10IMAP,9);             /* Set GPIRQ10 (ISA IRQ10) to IRQ10 */          
+	write_mmcr_word(SC520_PCIHOSTMAP,0x11f);       /* Map PCI hostbridge INT to NMI */
+	write_mmcr_word(SC520_ECCMAP,0x100);           /* Map SDRAM ECC failure INT to NMI */
+ 
+}
+
+/* PCI stuff */
+static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+	char pin;
+	int irq;
+	
+	
+	pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin);
+	irq = pin-1;
+	
+	switch (PCI_DEV(dev)) {
+	case 20:
+		break;
+	case 19:
+		irq+=1;
+		break;
+	case 18:
+		irq+=2;
+		break;
+	case 17:
+		irq+=3;
+		break;
+	default: 
+		return;
+	}
+	
+	irq&=3; /* wrap around */
+	irq+=9; /* lowest IRQ is 9 */
+	
+	pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, irq);
+#if 0	
+	printf("fixup_irq: device %d pin %c irq %d\n", 
+	       PCI_DEV(dev), 'A' + pin -1, irq);
+#endif
+}
+ 
+static struct pci_controller sc520_cdp_hose = {
+	fixup_irq: pci_sc520_cdp_fixup_irq,
+};
+
+void pci_init(void)
+{
+	pci_sc520_init(&sc520_cdp_hose);
+}
+
+
+static void silence_uart(int port)
+{
+	outb(0, port+1);
+}
+
+void setup_ali_sio(int uart_primary)
+{
+	ali512x_init();
+	
+	ali512x_set_fdc(ALI_ENABLED, 0x3f2, 6, 0);
+	ali512x_set_pp(ALI_ENABLED, 0x278, 7, 3);
+	ali512x_set_uart(ALI_ENABLED, ALI_UART1, uart_primary?0x3f8:0x3e8, 4);
+	ali512x_set_uart(ALI_ENABLED, ALI_UART2, uart_primary?0x2f8:0x2e8, 3);
+	ali512x_set_rtc(ALI_DISABLED, 0, 0);
+	ali512x_set_kbc(ALI_ENABLED, 1, 12);
+	ali512x_set_cio(ALI_ENABLED);
+	
+	/* IrDa pins */
+	ali512x_cio_function(12, 1, 0, 0);
+	ali512x_cio_function(13, 1, 0, 0);
+	
+	/* SSI chip select pins */
+	ali512x_cio_function(14, 0, 0, 0);  /* SSI_CS */
+	ali512x_cio_function(15, 0, 0, 0);  /* SSI_MV */					     
+	ali512x_cio_function(16, 0, 1, 0);  /* SSI_SPI# (inverted) */
+
+	/* Board REV pins */
+	ali512x_cio_function(20, 0, 0, 1);
+	ali512x_cio_function(21, 0, 0, 1);
+	ali512x_cio_function(22, 0, 0, 1);
+	ali512x_cio_function(23, 0, 0, 1);      
+}
+
+
+/* set up the ISA bus timing and system address mappings */
+static void bus_init(void)
+{
+
+	/* set up the GP IO pins */
+	write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); 	/* set the GPIO pin function 31-16 reg */		   
+	write_mmcr_word(SC520_PIOPFS15_0, 0xffff);  	/* set the GPIO pin function 15-0 reg */
+	write_mmcr_byte(SC520_CSPFS, 0xf8);  		/* set the CS pin function  reg */	
+	write_mmcr_byte(SC520_CLKSEL, 0x70);
+
+	
+	write_mmcr_byte(SC520_GPCSRT, 1);   /* set the GP CS offset */    	
+	write_mmcr_byte(SC520_GPCSPW, 3);   /* set the GP CS pulse width */
+	write_mmcr_byte(SC520_GPCSOFF, 1);  /* set the GP CS offset */
+	write_mmcr_byte(SC520_GPRDW, 3);    /* set the RD pulse width */
+	write_mmcr_byte(SC520_GPRDOFF, 1);  /* set the GP RD offset */
+        write_mmcr_byte(SC520_GPWRW, 3);    /* set the GP WR pulse width */
+	write_mmcr_byte(SC520_GPWROFF, 1);  /* set the GP WR offset */
+
+	write_mmcr_word(SC520_BOOTCSCTL, 0x1823);		/* set up timing of BOOTCS */ 
+	write_mmcr_word(SC520_ROMCS1CTL, 0x1823);		/* set up timing of ROMCS1 */
+	write_mmcr_word(SC520_ROMCS2CTL, 0x1823);		/* set up timing of ROMCS2 */ 
+	
+	/* adjust the memory map:
+	 * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM
+	 * and 256MB to 1G-128k  (0x1000000 - 0x37ffffff) is mapped to PCI mmio
+	 * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */ 
+	
+		
+	/* SRAM = GPCS3 128k @ d0000-effff*/
+	write_mmcr_long(SC520_PAR2,  0x4e00400d);		
+	
+	/* IDE0 = GPCS6 1f0-1f7 */
+	write_mmcr_long(SC520_PAR3,  0x380801f0);		
+
+	/* IDE1 = GPCS7 3f6 */
+	write_mmcr_long(SC520_PAR4,  0x3c0003f6);		
+	/* bootcs */
+	write_mmcr_long(SC520_PAR12, 0x8bffe800);		
+	/* romcs2 */
+	write_mmcr_long(SC520_PAR13, 0xcbfff000);		
+	/* romcs1 */
+	write_mmcr_long(SC520_PAR14, 0xabfff800);		
+	/* 680 LEDS */
+	write_mmcr_long(SC520_PAR15, 0x30000640);		
+	
+	asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */	
+
+	if (CFG_USE_SIO_UART) {
+		write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS);	
+		setup_ali_sio(1);
+	} else {
+		write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS));	
+		setup_ali_sio(0);
+		silence_uart(0x3e8);
+		silence_uart(0x2e8);
+	}
+
+}
+
+
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	
+	init_sc520();	
+	bus_init();
+	irq_init();
+		
+	/* max drive current on SDRAM */
+	write_mmcr_word(SC520_DSCTL, 0x0100);
+		
+	/* enter debug mode after next reset (only if jumper is also set) */
+	write_mmcr_byte(SC520_RESCFG, 0x08);
+	
+	/* configure the software timer to 33.333MHz */
+	write_mmcr_byte(SC520_SWTMRCFG, 0);
+	gd->bus_clk = 33333000;
+	
+	return 0;
+}
+
+int dram_init(void)
+{
+	init_sc520_dram();
+	return 0;
+}
+
+void show_boot_progress(int val)
+{
+	outb(val&0xff, 0x80);
+	outb((val&0xff00)>>8, 0x680);
+}
+
+
+int last_stage_init(void)
+{
+	int minor;
+	int major;
+	
+	major = minor = 0;
+	major |= ali512x_cio_in(23)?2:0;
+	major |= ali512x_cio_in(22)?1:0;
+	minor |= ali512x_cio_in(21)?2:0;
+	minor |= ali512x_cio_in(20)?1:0;
+	
+	printf("AMD SC520 CDP revision %d.%d\n", major, minor);
+}