diff options
author | Lars Poeschel <poeschel@lemonage.de> | 2013-01-11 00:53:31 +0000 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2013-02-07 10:36:26 -0500 |
commit | 1c1b7c3739095da7d73fef3adbe9f187791ca9ff (patch) | |
tree | 464437fb0e953b4929f778312a2e20ef0919e103 /board/phytec/pcm051/board.h | |
parent | aca0b8b4f7ec6622c171038084fb84b33dcea580 (diff) | |
download | u-boot-imx-1c1b7c3739095da7d73fef3adbe9f187791ca9ff.zip u-boot-imx-1c1b7c3739095da7d73fef3adbe9f187791ca9ff.tar.gz u-boot-imx-1c1b7c3739095da7d73fef3adbe9f187791ca9ff.tar.bz2 |
pcm051: Add support for Phytec phyCORE-AM335x
The board is named pcm051 and has this hardware:
SOC: TI AM3359
DDR3-RAM: 2x MT41J256M8HX-15EIT:D 512MiB
ETH 1: LAN8710AI
SPI-Flash: W25Q64BVSSIG
RTC: RV-4162-C7
I2C-EEPROM: CAT32WC32
NAND: MT29F4G08_VFPGA63
PMIC: TPS65910A3
LCD
Supported:
UART 1
MMC/SD
ETH 1
USB
I2C
SPI
Not yet supported:
NAND
RTC
LCD
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
[trini: Add #define CONFIG_PHY_ADDR 0 to config]
Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'board/phytec/pcm051/board.h')
-rw-r--r-- | board/phytec/pcm051/board.h | 33 |
1 files changed, 33 insertions, 0 deletions
diff --git a/board/phytec/pcm051/board.h b/board/phytec/pcm051/board.h new file mode 100644 index 0000000..c2630d7 --- /dev/null +++ b/board/phytec/pcm051/board.h @@ -0,0 +1,33 @@ +/* + * board.h + * + * Phytec phyCORE-AM335x (pcm051) boards information header + * + * Copyright (C) 2013, Lemonage Software GmbH + * Author Lars Poeschel <poeschel@lemonage.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * We have three pin mux functions that must exist. We must be able to enable + * uart0, for initial output and i2c0 to read the main EEPROM. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(void); +void enable_cbmux_pin_mux(void); +#endif |