diff options
| author | Stephen Warren <swarren@nvidia.com> | 2012-10-12 09:45:48 +0000 |
|---|---|---|
| committer | Tom Warren <twarren@nvidia.com> | 2012-10-29 09:07:04 -0700 |
| commit | 699c40e8789cfbb5c3ca4ef2849a4bd051ff79bb (patch) | |
| tree | 9d25e97fc49d1a0cae8b7a3098ea6d2ffd0265f2 /board/nvidia/dts | |
| parent | 938176a48274361c0b86b237ff6c0953a08233b3 (diff) | |
| download | u-boot-imx-699c40e8789cfbb5c3ca4ef2849a4bd051ff79bb.zip u-boot-imx-699c40e8789cfbb5c3ca4ef2849a4bd051ff79bb.tar.gz u-boot-imx-699c40e8789cfbb5c3ca4ef2849a4bd051ff79bb.tar.bz2 | |
ARM: tegra: Harmony: enable ULPI USB port
The ULPI port is routed onto pins on the mini PCI Express connector. A
standard breakout board may be used to access the port.
* Add required DT entries to configure the ULPI port.
* Setup up the ULPI pinmux in the board code.
* Enable multiple USB controller and ULPI support in the board config.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'board/nvidia/dts')
| -rw-r--r-- | board/nvidia/dts/tegra20-harmony.dts | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts index ca5facb..5645a8d 100644 --- a/board/nvidia/dts/tegra20-harmony.dts +++ b/board/nvidia/dts/tegra20-harmony.dts @@ -8,6 +8,7 @@ aliases { usb0 = "/usb@c5008000"; + usb1 = "/usb@c5004000"; }; memory { @@ -52,7 +53,7 @@ }; usb@c5004000 { - status = "disabled"; + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ }; nand-controller@70008000 { |