summaryrefslogtreecommitdiff
path: root/board/jse/jse.c
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-04-15 23:14:49 +0000
committerwdenk <wdenk>2004-04-15 23:14:49 +0000
commitdb01a2ea991b539ffbd36ab952fcf2e754789a83 (patch)
tree8514a5df0b86fe3315a29fd9068093da43f3b3ca /board/jse/jse.c
parentbda6c8aece36f4f21cb041f518d09c26e4fb47eb (diff)
downloadu-boot-imx-db01a2ea991b539ffbd36ab952fcf2e754789a83.zip
u-boot-imx-db01a2ea991b539ffbd36ab952fcf2e754789a83.tar.gz
u-boot-imx-db01a2ea991b539ffbd36ab952fcf2e754789a83.tar.bz2
* Patch by Stephen Williams, 01 Apr 2004:
Add support for Picture Elements JSE board * Patch by Christian Pell, 01 Apr 2004: Add CompactFlash support for PXA systems.
Diffstat (limited to 'board/jse/jse.c')
-rw-r--r--board/jse/jse.c160
1 files changed, 160 insertions, 0 deletions
diff --git a/board/jse/jse.c b/board/jse/jse.c
new file mode 100644
index 0000000..9290814
--- /dev/null
+++ b/board/jse/jse.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 2004 Picture Elements, Inc.
+ * Stephen Williams (steve@icarus.com)
+ *
+ * This source code is free software; you can redistribute it
+ * and/or modify it in source code form under the terms of the GNU
+ * General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+# include <common.h>
+# include <ppc4xx.h>
+# include <asm/processor.h>
+# include <asm/io.h>
+# include "jse_priv.h"
+
+/*
+ * This function is run very early, out of flash, and before devices are
+ * initialized. It is called by lib_ppc/board.c:board_init_f by virtue
+ * of being in the init_sequence array.
+ *
+ * The SDRAM has been initialized already -- start.S:start called
+ * init.S:init_sdram early on -- but it is not yet being used for
+ * anything, not even stack. So be careful.
+ */
+int board_early_init_f (void)
+{
+ /*-------------------------------------------------------------------------+
+ | Interrupt controller setup for the JSE board.
+ | Note: IRQ 0-15 405GP internally generated; active high; level sensitive
+ | IRQ 16 405GP internally generated; active low; level sensitive
+ | IRQ 17-24 RESERVED/UNUSED
+ | IRQ 25 (EXT IRQ 0) PCI SLOT 0; active low; level sensitive
+ | IRQ 26 (EXT IRQ 1) PCI SLOT 1; active low; level sensitive
+ | IRQ 27 (EXT IRQ 2) JP2C CHIP ; active low; level sensitive
+ | IRQ 28 (EXT IRQ 3) PCI bridge; active low; level sensitive
+ | IRQ 29 (EXT IRQ 4) SystemACE IRQ; active high
+ | IRQ 30 (EXT IRQ 5) SystemACE BRdy (unused)
+ | IRQ 31 (EXT IRQ 6) (unused)
+ +-------------------------------------------------------------------------*/
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (uicer, 0x00000000); /* disable all ints */
+ mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
+ mtdcr (uicpr, 0xFFFFFF87); /* set int polarities */
+ mtdcr (uictr, 0x10000000); /* set int trigger levels */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ /* Configure the interface to the SystemACE MCU port.
+ The SystemACE is fast, but there is no reason to have
+ excessivly tight timings. So the settings are slightly
+ generous. */
+
+ /* EBC0_B1AP: BME=1, TWT=2, CSN=0, OEN=1,
+ WBN=0, WBF=1, TH=0, RE=0, SOR=0, BEM=0, PEN=0 */
+ mtdcr (ebccfga, pb1ap);
+ mtdcr (ebccfgd, 0x01011000);
+
+ /* EBC0_B1CR: BAS=x, BS=0(1MB), BU=3(R/W), BW=0(8bits) */
+ mtdcr (ebccfga, pb1cr);
+ mtdcr (ebccfgd, CFG_SYSTEMACE_BASE | 0x00018000);
+
+ /* Enable the /PerWE output as /PerWE, instead of /PCIINT. */
+ /* CPC0_CR1 |= PCIPW */
+ mtdcr (0xb2, mfdcr (0xb2) | 0x00004000);
+
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_PRE_INIT
+int board_pre_init (void)
+{
+ return board_early_init_f ();
+}
+
+#endif
+
+/*
+ * This function is also called by lib_ppc/board.c:board_init_f (it is
+ * also in the init_sequence array) but later. Many more things are
+ * configured, but we are still running from flash.
+ */
+int checkboard (void)
+{
+ unsigned vers, status;
+
+ /* check that the SystemACE chip is alive. */
+ printf ("ACE: ");
+ vers = readw (CFG_SYSTEMACE_BASE + 0x16);
+ printf ("SystemACE %u.%u (build %u)",
+ (vers >> 12) & 0x0f, (vers >> 8) & 0x0f, vers & 0xff);
+
+ status = readl (CFG_SYSTEMACE_BASE + 0x04);
+#ifdef DEBUG
+ printf (" STATUS=0x%08x", status);
+#endif
+ /* If the flash card is present and there is an initial error,
+ then force a restart of the program. */
+ if (status & 0x00000010) {
+ printf (" CFDETECT");
+
+ if (status & 0x04) {
+ /* CONTROLREG = CFGPROG */
+ writew (0x1000, CFG_SYSTEMACE_BASE + 0x18);
+ udelay (500);
+ /* CONTROLREG = CFGRESET */
+ writew (0x0080, CFG_SYSTEMACE_BASE + 0x18);
+ udelay (500);
+ writew (0x0000, CFG_SYSTEMACE_BASE + 0x18);
+ /* CONTROLREG = CFGSTART */
+ writew (0x0020, CFG_SYSTEMACE_BASE + 0x18);
+
+ status = readl (CFG_SYSTEMACE_BASE + 0x04);
+ }
+ }
+
+ /* Wait for the SystemACE to program its chain of devices. */
+ while ((status & 0x84) == 0x00) {
+ udelay (500);
+ status = readl (CFG_SYSTEMACE_BASE + 0x04);
+ }
+
+ if (status & 0x04)
+ printf (" CFG-ERROR");
+ if (status & 0x80)
+ printf (" CFGDONE");
+
+ printf ("\n");
+
+ /* Force /RTS to active. The board it not wired quite
+ correctly to use cts/rtc flow control, so just force the
+ /RST active and forget about it. */
+ writeb (readb (0xef600404) | 0x03, 0xef600404);
+
+ printf ("JSE: ready\n");
+
+ return 0;
+}
+
+/* **** No more functions called by board_init_f. **** */
+
+/*
+ * This function is called by lib_ppc/board.c:board_init_r. At this
+ * point, basic setup is done, U-Boot has been moved into SDRAM and
+ * PCI has been set up. From here we done late setup.
+ */
+int misc_init_r (void)
+{
+ host_bridge_init ();
+ return 0;
+}