Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  ARM: Add Calxeda Highbank platform
  dkb: make mmc command as default enabled
  Marvell: dkb: add mmc support
  ARM: pantheon: add mmc definition
  davinci: remove config.mk file from the sources
  ARM:AM33XX: Add support for TI AM335X EVM
  ARM:AM33XX: Added timer support
  ARM:AM33XX: Add emif/ddr support
  ARM:AM33XX: Add clock definitions
  ARM:AM33XX: Added support for AM33xx
  omap3/emif4: fix registers definition
  davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
  davinci: emac: add support for more than 1 PHYs
  davinci: emac: add new features to autonegotiate for EMAC
  da850evm: Move LPSC configuration to board_early_init_f()
  omap4_panda: Build in cmd_gpio support on panda
  omap: Don't use gpio_free to change direction to input
  mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset
  OMAP3: overo : Add environment variable optargs to bootargs
  OMAP3: overo: Move ethernet CS4 configuration to execute based on board id
  OMAP3: overo : Use ttyO2 instead of ttyS2.
  da830: add support for NAND boot mode
  dm36x: revert cache disable patch
  dm644X: revert cache disable patch
  devkit8000: Add malloc space
  omap: spl: fix build break due to changes in FAT
  OMAP3 SPL: Provide weak omap_rev_string
  omap: beagle: Use ubifs instead of jffs2 for nand boot
  omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
  omap: overo: Configure mux for gpio10
  SPL: Add DMA library
  omap3: Add interface for omap3 DMA
  omap3: Add DMA register accessors
  omap3: Add Base register for DMA
  arm, davinci: add missing LSPC define for MMC/SD1
  U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
  DaVinci: correct MDSTAT.STATE mask
  omap4: splitting padconfs into common, 4430 and 4460
  omap4: adding revision detection for 4460 ES1.1
  omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL
  gplug: fixed build error as a result of code cleanup patch
  kirkwood_spi: add dummy spi_init()
  gpio: mvmfp: reduce include platform file
  ARM: orion5x: reduce dependence of including platform file
  serial: reduce include platform file for marvell chip
  ARM: kirkwood: reduce dependence of including platform file
  ARM: armada100: reduce dependence of including platform file
  ARM: pantheon: reduce dependence of including platform file
  Armada100: Add env storage support for Marvell gplugD
  Armada100: Add SPI flash support for Marvell gplugD
  Armada100: Add SPI support for Marvell gplugD
  SPI: Add SPI driver support for Marvell Armada100
  dreamplug: initial board support.
  imx: fix coding style
  misc: pmic: drop old Freescale's pmic driver
  MX31: mx31pdk: use new pmic driver
  MX31: mx31ads: use new pmic driver
  MX31: mx31_litekit: use new pmic driver
  MX5: mx53evk: use new pmic driver
  MX5: mx51evk: use new pmic driver
  MX35: mx35pdk: use new pmic driver
  misc: pmic: addI2C  support to pmic_fsl driver
  misc: pmic: use I2C_SET_BUS in pmic I2C
  MX5: efikamx/efikasb: use new pmic driver
  MX3: qong: use new pmic driver
  RTC: Switch mc13783 to generic pmic code
  MX5: vision2: use new pmic driver
  misc: pmic: Freescale PMIC switches to generic PMIC driver
  misc:pmic:samsung Enable PMIC driver at GONI target
  misc:pmic:max8998 MAX8998 support at a new PMIC driver.
  misc:pmic:core New generic PMIC driver
  mx31pdk: Remove unneeded config
  mx31: provide readable WEIM CS accessor
  MX51: vision2: Set global macros
  I2C: Add i2c_get/set_speed() to mxc_i2c.c
  ARM: Update mach-types
  devkit8000: Add config to enable SPL MMC boot
  devkit8000: protect board_mmc_init
  arm, post: add missing post_time_ms for arm
  cosmetic, post: Codingstyle cleanup
  arm, logbuffer: make it compileclean
  tegra2: Enable MMC for Seaboard
  tegra2: Add more pinmux functions
  tegra2: Rename PIN_ to PINGRP_
  tegra2: Add more clock functions
  tegra2: Clean up board code a little
  tegra2: Rename CLOCK_PLL_ID to CLOCK_ID

1 files changed, 32 insertions, 9 deletions

diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c
index 47f1a8d..c165590 100644
--- a/board/imx31_phycore/imx31_phycore.c
+++ b/board/imx31_phycore/imx31_phycore.c
@@ -27,6 +27,7 @@
 #include <netdev.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -49,17 +50,39 @@ int board_init(void)
 
 int board_early_init_f(void)
 {
-	__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
-	__REG(CSCR_L(0)) = 0x10000d03;
-	__REG(CSCR_A(0)) = 0x00720900;
+	/* CS0: Nor Flash */
+	static const struct mxc_weimcs cs0 = {
+		/*    sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
+		CSCR_U(0, 0,  0,  0,  0,  0,   0,  0,  3, 15, 0,  0,  3),
+		/*   oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
+		CSCR_L(1,  0,   0,   0,  0,  1,  5,  0,  0,  0,   1,   1),
+		/*  ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
+		CSCR_A(0,   0,  7,  2,  0,  0,  2,  1,  0,  0,  0,  0,   0,  0)
+	};
+
+	/* CS1: Network Controller */
+	static const struct mxc_weimcs cs1 = {
+		/*    sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
+		CSCR_U(0, 0,  0,  0,  0,  0,   0,  0,  3, 31, 0,  0,  6),
+		/*   oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
+		CSCR_L(4,  4,   4,  10,  4,  0,  5,  4,  0,  0,   0,   1),
+		/*  ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
+		CSCR_A(4,   4,  4,  4,  0,  1,  4,  3,  0,  0,  0,  0,   1,  0)
+	};
 
-	__REG(CSCR_U(1)) = 0x0000df06; /* CS1: Network Controller */
-	__REG(CSCR_L(1)) = 0x444a4541;
-	__REG(CSCR_A(1)) = 0x44443302;
+	/* CS4: SRAM */
+	static const struct mxc_weimcs cs4 = {
+		/*    sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
+		CSCR_U(0, 0,  0,  0,  0,  0,   0,  0,  3, 24, 0,  4,  3),
+		/*   oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
+		CSCR_L(2,  2,   2,   5,  2,  0,  5,  2,  0,  0,   0,   1),
+		/*  ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
+		CSCR_A(2,   2,  2,  2,  0,  0,  2,  2,  0,  0,  0,  0,   0,  0)
+	};
 
-	__REG(CSCR_U(4)) = 0x0000d843; /* CS4: SRAM */
-	__REG(CSCR_L(4)) = 0x22252521;
-	__REG(CSCR_A(4)) = 0x22220a00;
+	mxc_setup_weimcs(0, &cs0);
+	mxc_setup_weimcs(1, &cs1);
+	mxc_setup_weimcs(4, &cs4);
 
 	/* setup pins for UART1 */
 	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);