summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
authorShaohui Xie <Shaohui.Xie@freescale.com>2014-11-13 11:26:19 +0800
committerYork Sun <yorksun@freescale.com>2014-12-05 08:06:13 -0800
commit89b94d851d683308e731e3ceae1a12f616d1f2f7 (patch)
tree1eb37fead47897cdb4c99276a15d608504a51201 /board/freescale
parent8c328c21b7f9b794523c966b777700c0e9b7f424 (diff)
downloadu-boot-imx-89b94d851d683308e731e3ceae1a12f616d1f2f7.zip
u-boot-imx-89b94d851d683308e731e3ceae1a12f616d1f2f7.tar.gz
u-boot-imx-89b94d851d683308e731e3ceae1a12f616d1f2f7.tar.bz2
powerpc/b4860qds: add xfi support
We need following changes to make xfi work on B4: 1. set cross-point switch VSC3308 to use sfp config when running xfi; 2. add 10G interface check for xfi; 3. set phy address for xfi so the 10G ports can be registered by mdio; Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/b4860qds/b4860qds.c40
-rw-r--r--board/freescale/b4860qds/eth_b4860qds.c6
2 files changed, 39 insertions, 7 deletions
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c
index b3a1e75..87dcc10 100644
--- a/board/freescale/b4860qds/b4860qds.c
+++ b/board/freescale/b4860qds/b4860qds.c
@@ -490,6 +490,9 @@ int configure_vsc3316_3308(void)
return -1;
}
+ num_vsc08_con = NUM_CON_VSC3308;
+ /* Configure VSC3308 crossbar switch */
+ ret = select_i2c_ch_pca(I2C_CH_VSC3308);
switch (serdes2_prtcl) {
#ifdef CONFIG_PPC_B4420
case 0x9d:
@@ -497,18 +500,11 @@ int configure_vsc3316_3308(void)
case 0x9E:
case 0x9A:
case 0x98:
- case 0xb1:
- case 0xb2:
case 0x48:
case 0x49:
case 0x4E:
- case 0x8C:
- case 0x8D:
case 0x79:
case 0x7A:
- num_vsc08_con = NUM_CON_VSC3308;
- /* Configure VSC3308 crossbar switch */
- ret = select_i2c_ch_pca(I2C_CH_VSC3308);
if (!ret) {
ret = vsc3308_config(VSC3308_TX_ADDRESS,
vsc08_tx_amc, num_vsc08_con);
@@ -522,6 +518,36 @@ int configure_vsc3316_3308(void)
return ret;
}
break;
+ case 0x80:
+ case 0x81:
+ case 0x82:
+ case 0x83:
+ case 0x84:
+ case 0x85:
+ case 0x86:
+ case 0x87:
+ case 0x88:
+ case 0x89:
+ case 0x8a:
+ case 0x8b:
+ case 0x8c:
+ case 0x8d:
+ case 0x8e:
+ case 0xb1:
+ case 0xb2:
+ if (!ret) {
+ ret = vsc3308_config(VSC3308_TX_ADDRESS,
+ vsc08_tx_sfp, num_vsc08_con);
+ if (ret)
+ return ret;
+ ret = vsc3308_config(VSC3308_RX_ADDRESS,
+ vsc08_rx_sfp, num_vsc08_con);
+ if (ret)
+ return ret;
+ } else {
+ return ret;
+ }
+ break;
default:
printf("WARNING:VSC crossbars programming not supported for: %x"
" SerDes2 Protocol.\n", serdes2_prtcl);
diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c
index 2726cd2..aa48b5e 100644
--- a/board/freescale/b4860qds/eth_b4860qds.c
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -268,6 +268,12 @@ int board_eth_init(bd_t *bis)
CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC4,
CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
+ /*
+ * XFI does not need a PHY to work, but to make U-boot
+ * happy, assign a fake PHY address for a XFI port.
+ */
+ fm_info_set_phy_address(FM1_10GEC1, 0);
+ fm_info_set_phy_address(FM1_10GEC2, 1);
break;
case 0x98:
/* XAUI in Slot1 and Slot2 */