diff options
| author | Wolfgang Grandegger <wg@grandegger.com> | 2009-02-11 18:38:23 +0100 |
|---|---|---|
| committer | Scott Wood <scottwood@freescale.com> | 2009-03-23 15:53:40 -0500 |
| commit | 33846df28fa1f4cf96a96c18142d48d813caa892 (patch) | |
| tree | 12db31d9d2321af9c1a4e728eb070d4b4c372e1c /board/freescale | |
| parent | 06e9f7df054d26d7f49c56bf9a6844b193ad6313 (diff) | |
| download | u-boot-imx-33846df28fa1f4cf96a96c18142d48d813caa892.zip u-boot-imx-33846df28fa1f4cf96a96c18142d48d813caa892.tar.gz u-boot-imx-33846df28fa1f4cf96a96c18142d48d813caa892.tar.bz2 | |
Add wait flags to support board/chip specific delays
The NAND flash on the TQM8548_BE modules requires a short delay after
running the UPM pattern like the MPC8360ERDK board does. The TQM8548_BE
requires a further short delay after writing out a buffer. Normally the
R/B pin should be checked, but it's not connected on the TQM8548_BE.
The corresponding Linux FSL UPM driver uses similar delay points at the
same locations. To manage these extra delays in a more general way, I
introduced the "wait_flags" field allowing the board-specific driver to
specify various types of extra delay.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Diffstat (limited to 'board/freescale')
| -rw-r--r-- | board/freescale/mpc8360erdk/nand.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c index aa43350..9ffffb4 100644 --- a/board/freescale/mpc8360erdk/nand.c +++ b/board/freescale/mpc8360erdk/nand.c @@ -76,7 +76,7 @@ static struct fsl_upm_nand fun = { .upm_cmd_offset = 8, .upm_addr_offset = 16, .dev_ready = dev_ready, - .wait_pattern = 1, + .wait_flags = FSL_UPM_WAIT_RUN_PATTERN, .chip_delay = 50, }; |