summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2014-11-26 11:22:29 -0500
committerTom Rini <trini@ti.com>2014-11-26 11:22:29 -0500
commit21008ad6384170767041f1608975473c5ffa7fc7 (patch)
treeeb00c0fb9650e14ba768d720c057373d9ea59451 /board/freescale
parentd3e488eaf48c49980adb8509a76f8577b1cf2599 (diff)
parent3b4b9a3377d6e7cba6060497b02644f9ff2ac67a (diff)
downloadu-boot-imx-21008ad6384170767041f1608975473c5ffa7fc7.zip
u-boot-imx-21008ad6384170767041f1608975473c5ffa7fc7.tar.gz
u-boot-imx-21008ad6384170767041f1608975473c5ffa7fc7.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Conflicts: drivers/mmc/fsl_esdhc.c Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'board/freescale')
-rwxr-xr-xboard/freescale/t208xqds/README274
-rw-r--r--board/freescale/t208xqds/eth_t208xqds.c173
2 files changed, 438 insertions, 9 deletions
diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README
new file mode 100755
index 0000000..83060c1
--- /dev/null
+++ b/board/freescale/t208xqds/README
@@ -0,0 +1,274 @@
+The T2080QDS is a high-performance computing evaluation, development and
+test platform supporting the T2080 QorIQ Power Architecture processor.
+
+T2080 SoC Overview
+------------------
+The T2080 QorIQ multicore processor combines four dual-threaded e6500 Power
+Architecture processor cores with high-performance datapath acceleration
+logic and network and peripheral bus interfaces required for networking,
+telecom/datacom, wireless infrastructure, and mil/aerospace applications.
+
+T2080 includes the following functions and features:
+ - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz
+ - 2MB L2 cache and 512KB CoreNet platform cache (CPC)
+ - Hierarchical interconnect fabric
+ - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
+ - Data Path Acceleration Architecture (DPAA) incorporating acceleration
+ - 16 SerDes lanes up to 10.3125 GHz
+ - 8 Ethernet interfaces, supporting combinations of the following:
+ - Up to four 10 Gbps Ethernet MACs
+ - Up to eight 1 Gbps Ethernet MACs
+ - Up to four 2.5 Gbps Ethernet MACs
+ - High-speed peripheral interfaces
+ - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
+ - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz
+ - Additional peripheral interfaces
+ - Two serial ATA (SATA 2.0) controllers
+ - Two high-speed USB 2.0 controllers with integrated PHY
+ - Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC)
+ - Enhanced serial peripheral interface (eSPI)
+ - Four I2C controllers
+ - Four 2-pin UARTs or two 4-pin UARTs
+ - Integrated Flash Controller supporting NAND and NOR flash
+ - Three eight-channel DMA engines
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ Platform's Trust Architecture 2.0
+
+Differences between T2080 and T2081
+-----------------------------------
+ Feature T2080 T2081
+ 1G Ethernet numbers: 8 6
+ 10G Ethernet numbers: 4 2
+ SerDes lanes: 16 8
+ Serial RapidIO,RMan: 2 no
+ SATA Controller: 2 no
+ Aurora: yes no
+ SoC Package: 896-pins 780-pins
+
+
+T2080QDS feature overview
+-------------------------
+Processor:
+ - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
+Memory:
+ - Single memory controller capable of supporting DDR3 and DDR3-LV devices
+ - Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support
+Ethernet interfaces:
+ - Two 1Gbps RGMII on-board ports
+ - Four 10Gbps XFI on-board cages
+ - 1Gbps/2.5Gbps SGMII Riser card
+ - 10Gbps XAUI Riser card
+Accelerator:
+ - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
+SerDes:
+ - 16 lanes up to 10.3125GHz
+ - Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI
+IFC:
+ - 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA
+eSPI:
+ - Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
+USB:
+ - Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB)
+PCIE:
+ - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
+SATA:
+ - Two SATA 2.0 ports on-board
+SRIO:
+ - Two Serial RapidIO 2.0 ports up to 5 GHz
+eSDHC:
+ - Supports SD/SDHC/SDXC/eMMC Card
+I2C:
+ - Four I2C controllers.
+UART:
+ - Dual 4-pins UART serial ports
+System Logic:
+ - QIXIS-II FPGA system controll
+Debug Features:
+ - Support Legacy, COP/JTAG, Aurora, Event and EVT
+XFI:
+ - XFI is supported on T2080QDS through Lane A/B/C/D on Serdes 1 routed to
+ a on-board SFP+ cages, which to house optical module (fiber cable) or
+ direct attach cable(copper), the copper cable is used to emulate
+ 10GBASE-KR scenario.
+ So, for XFI usage, there are two scenarios, one will use fiber cable,
+ another will use copper cable. An hwconfig env "fsl_10gkr_copper" is
+ introduced to indicate a XFI port will use copper cable, and U-boot
+ will fixup the dtb accordingly.
+ It's used as: fsl_10gkr_copper:<10g_mac_name>
+ The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm1_10g3, fm1_10g4, they
+ do not have to be coexist in hwconfig. If a MAC is listed in the env
+ "fsl_10gkr_copper", it will use copper cable, otherwise, fiber cable
+ will be used by default.
+ for ex. set "fsl_10gkr_copper:fm1_10g1,fm1_10g2,fm1_10g3,fm1_10g4" in
+ hwconfig, then both four XFI ports will use copper cable.
+ set "fsl_10gkr_copper:fm1_10g1,fm1_10g2" in hwconfig, then first two
+ XFI ports will use copper cable, the other two XFI ports will use fiber
+ cable.
+1000BASE-KX(1G-KX):
+ - T2080QDS can support 1G-KX by using SGMII protocol, but serdes lane
+ runs in 1G-KX mode. By default, the lane runs in SGMII mode, to set a lane
+ in 1G-KX mode, need to set corresponding bit in SerDes Protocol Configuration
+ Register 1 (PCCR1), and U-boot fixup the dtb for kernel to do proper
+ initialization.
+ Hwconfig "fsl_1gkx" is used to indicate a lane runs in 1G-KX mode, MAC
+ 1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set a
+ MAC to use 1G-KX mode, set its' corresponding env in "fsl_1gkx", 'fm1_1g1'
+ stands for MAC 1, 'fm1_1g2' stands for MAC 2, etc.
+ For ex. set "fsl_1gkx:fm1_1g1,fm1_1g2,fm1_1g5,fm1_1g6,fm1_1g9,fm1_1g10" in
+ hwconfig, MAC 1/2/5/6/9/10 will use 1G-KX mode.
+
+System Memory map
+----------------
+
+Start Address End Address Description Size
+0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
+0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
+0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
+0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
+0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
+0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
+0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
+0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
+0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB
+0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB
+0xF_0000_0000 0xF_003F_FFFF DCSR 4MB
+0xC_4000_0000 0xC_4FFF_FFFF PCI Express 4 Mem Space 256MB
+0xC_3000_0000 0xC_3FFF_FFFF PCI Express 3 Mem Space 256MB
+0xC_2000_0000 0xC_2FFF_FFFF PCI Express 2 Mem Space 256MB
+0xC_0000_0000 0xC_1FFF_FFFF PCI Express 1 Mem Space 512MB
+0x0_0000_0000 0x0_ffff_ffff DDR 4GB
+
+
+128M NOR Flash memory Map
+-------------------------
+Start Address End Address Definition Max size
+0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
+0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
+0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
+0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
+0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
+0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
+0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
+0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
+0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
+0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
+0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
+0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB
+0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
+0xE8000000 0xE801FFFF RCW (current bank) 128KB
+
+
+
+Software configurations and board settings
+------------------------------------------
+1. NOR boot:
+ a. build NOR boot image
+ $ make T2080QDS_config
+ $ make
+ b. program u-boot.bin image to NOR flash
+ => tftp 1000000 u-boot.bin
+ => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
+ set SW1[1:8] = '00010011', SW2[1] = '1', SW6[1:4] = '0000' for NOR boot
+
+ Switching between default bank0 and alternate bank4 on NOR flash
+ To change boot source to vbank4:
+ by software: run command 'qixis_reset altbank' in u-boot.
+ by DIP-switch: set SW6[1:4] = '0100'
+
+ To change boot source to vbank0:
+ by software: run command 'qixis_reset' in u-boot.
+ by DIP-Switch: set SW6[1:4] = '0000'
+
+2. NAND Boot:
+ a. build PBL image for NAND boot
+ $ make T2080QDS_NAND_config
+ $ make
+ b. program u-boot-with-spl-pbl.bin to NAND flash
+ => tftp 1000000 u-boot-with-spl-pbl.bin
+ => nand erase 0 $filesize
+ => nand write 1000000 0 $filesize
+ set SW1[1:8] = '10000010', SW2[1] = '0' and SW6[1:4] = '1001' for NAND boot
+
+3. SPI Boot:
+ a. build PBL image for SPI boot
+ $ make T2080QDS_SPIFLASH_config
+ $ make
+ b. program u-boot-with-spl-pbl.bin to SPI flash
+ => tftp 1000000 u-boot-with-spl-pbl.bin
+ => sf probe 0
+ => sf erase 0 f0000
+ => sf write 1000000 0 $filesize
+ set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
+
+4. SD Boot:
+ a. build PBL image for SD boot
+ $ make T2080QDS_SDCARD_config
+ $ make
+ b. program u-boot-with-spl-pbl.bin to SD/MMC card
+ => tftp 1000000 u-boot-with-spl-pbl.bin
+ => mmc write 1000000 8 0x800
+ => tftp 1000000 fsl_fman_ucode_T2080_xx.bin
+ => mmc write 1000000 0x820 80
+ set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
+
+
+2-stage NAND/SPI/SD boot loader
+-------------------------------
+PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
+SPL further initializes DDR using SPD and environment variables
+and copy u-boot(768 KB) from NAND/SPI/SD device to DDR.
+Finally SPL transers control to u-boot for futher booting.
+
+SPL has following features:
+ - Executes within 256K
+ - No relocation required
+
+Run time view of SPL framework
+-------------------------------------------------
+|Area | Address |
+-------------------------------------------------
+|SecureBoot header | 0xFFFC0000 (32KB) |
+-------------------------------------------------
+|GD, BD | 0xFFFC8000 (4KB) |
+-------------------------------------------------
+|ENV | 0xFFFC9000 (8KB) |
+-------------------------------------------------
+|HEAP | 0xFFFCB000 (50KB) |
+-------------------------------------------------
+|STACK | 0xFFFD8000 (22KB) |
+-------------------------------------------------
+|U-boot SPL | 0xFFFD8000 (160KB) |
+-------------------------------------------------
+
+NAND Flash memory Map on T2080QDS
+--------------------------------------------------------------
+Start End Definition Size
+0x000000 0x0FFFFF u-boot img 1MB (2 blocks)
+0x100000 0x17FFFF u-boot env 512KB (1 block)
+0x180000 0x1FFFFF FMAN ucode 512KB (1 block)
+
+
+Micro SD Card memory Map on T2080QDS
+----------------------------------------------------
+Block #blocks Definition Size
+0x008 2048 u-boot img 1MB
+0x800 0016 u-boot env 8KB
+0x820 0128 FMAN ucode 64KB
+
+
+SPI Flash memory Map on T2080QDS
+----------------------------------------------------
+Start End Definition Size
+0x000000 0x0FFFFF u-boot img 1MB
+0x100000 0x101FFF u-boot env 8KB
+0x110000 0x11FFFF FMAN ucode 64KB
+
+
+How to update the ucode of Freescale FMAN
+-----------------------------------------
+=> tftp 1000000 fsl_fman_ucode_t2080_xx.bin
+=> pro off all;erase 0xeff00000 0xeff1ffff;cp 1000000 0xeff00000 $filesize
+
+
+For more details, please refer to T2080QDS User Guide and access
+website www.freescale.com and Freescale QorIQ SDK Infocenter document.
diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c
index 5879198..b82e9e7 100644
--- a/board/freescale/t208xqds/eth_t208xqds.c
+++ b/board/freescale/t208xqds/eth_t208xqds.c
@@ -23,6 +23,7 @@
#include <phy.h>
#include <asm/fsl_dtsec.h>
#include <asm/fsl_serdes.h>
+#include <hwconfig.h>
#include "../common/qixis.h"
#include "../common/fman.h"
#include "t208xqds_qixis.h"
@@ -46,6 +47,15 @@
#define EMI2 8
#endif
+#define PCCR1_SGMIIA_KX_MASK 0x00008000
+#define PCCR1_SGMIIB_KX_MASK 0x00004000
+#define PCCR1_SGMIIC_KX_MASK 0x00002000
+#define PCCR1_SGMIID_KX_MASK 0x00001000
+#define PCCR1_SGMIIE_KX_MASK 0x00000800
+#define PCCR1_SGMIIF_KX_MASK 0x00000400
+#define PCCR1_SGMIIG_KX_MASK 0x00000200
+#define PCCR1_SGMIIH_KX_MASK 0x00000100
+
static int mdio_mux[NUM_FM_PORTS];
static const char * const mdio_names[] = {
@@ -187,8 +197,18 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
{
int phy;
char alias[20];
+ char lane_mode[2][20] = {"1000BASE-KX", "10GBASE-KR"};
+ char buf[32] = "serdes-1,";
struct fixed_link f_link;
+ int media_type = 0;
+ int off;
+
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_T2080QDS
+ serdes_corenet_t *srds_regs =
+ (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+ u32 srds1_pccr1 = in_be32(&srds_regs->srdspccr1);
+#endif
u32 srds_s1 = in_be32(&gur->rcwsr[4]) &
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
@@ -199,9 +219,54 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
switch (port) {
#if defined(CONFIG_T2080QDS)
case FM1_DTSEC1:
+ if (hwconfig_sub("fsl_1gkx", "fm1_1g1")) {
+ media_type = 1;
+ fdt_set_phy_handle(fdt, compat, addr,
+ "phy_1gkx1");
+ fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio1");
+ sprintf(buf, "%s%s%s", buf, "lane-c,",
+ (char *)lane_mode[0]);
+ out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
+ PCCR1_SGMIIH_KX_MASK);
+ break;
+ }
case FM1_DTSEC2:
+ if (hwconfig_sub("fsl_1gkx", "fm1_1g2")) {
+ media_type = 1;
+ fdt_set_phy_handle(fdt, compat, addr,
+ "phy_1gkx2");
+ fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio2");
+ sprintf(buf, "%s%s%s", buf, "lane-d,",
+ (char *)lane_mode[0]);
+ out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
+ PCCR1_SGMIIG_KX_MASK);
+ break;
+ }
case FM1_DTSEC9:
+ if (hwconfig_sub("fsl_1gkx", "fm1_1g9")) {
+ media_type = 1;
+ fdt_set_phy_handle(fdt, compat, addr,
+ "phy_1gkx9");
+ fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio9");
+ sprintf(buf, "%s%s%s", buf, "lane-a,",
+ (char *)lane_mode[0]);
+ out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
+ PCCR1_SGMIIE_KX_MASK);
+ break;
+ }
case FM1_DTSEC10:
+ if (hwconfig_sub("fsl_1gkx", "fm1_1g10")) {
+ media_type = 1;
+ fdt_set_phy_handle(fdt, compat, addr,
+ "phy_1gkx10");
+ fdt_status_okay_by_alias(fdt,
+ "1gkx_pcs_mdio10");
+ sprintf(buf, "%s%s%s", buf, "lane-b,",
+ (char *)lane_mode[0]);
+ out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
+ PCCR1_SGMIIF_KX_MASK);
+ break;
+ }
if (mdio_mux[port] == EMI1_SLOT2) {
sprintf(alias, "phy_sgmii_s2_%x", phy);
fdt_set_phy_handle(fdt, compat, addr, alias);
@@ -213,7 +278,29 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
}
break;
case FM1_DTSEC5:
+ if (hwconfig_sub("fsl_1gkx", "fm1_1g5")) {
+ media_type = 1;
+ fdt_set_phy_handle(fdt, compat, addr,
+ "phy_1gkx5");
+ fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio5");
+ sprintf(buf, "%s%s%s", buf, "lane-g,",
+ (char *)lane_mode[0]);
+ out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
+ PCCR1_SGMIIC_KX_MASK);
+ break;
+ }
case FM1_DTSEC6:
+ if (hwconfig_sub("fsl_1gkx", "fm1_1g6")) {
+ media_type = 1;
+ fdt_set_phy_handle(fdt, compat, addr,
+ "phy_1gkx6");
+ fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio6");
+ sprintf(buf, "%s%s%s", buf, "lane-h,",
+ (char *)lane_mode[0]);
+ out_be32(&srds_regs->srdspccr1, srds1_pccr1 |
+ PCCR1_SGMIID_KX_MASK);
+ break;
+ }
if (mdio_mux[port] == EMI1_SLOT1) {
sprintf(alias, "phy_sgmii_s1_%x", phy);
fdt_set_phy_handle(fdt, compat, addr, alias);
@@ -257,6 +344,12 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
default:
break;
}
+ if (media_type) {
+ /* set property for 1000BASE-KX in dtb */
+ off = fdt_node_offset_by_compat_reg(fdt,
+ "fsl,fman-memac-mdio", addr + 0x1000);
+ fdt_setprop_string(fdt, off, "lane-instance", buf);
+ }
} else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) {
switch (srds_s1) {
@@ -265,15 +358,77 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
case 0x6c:
case 0x6d:
case 0x71:
- f_link.phy_id = port;
- f_link.duplex = 1;
- f_link.link_speed = 10000;
- f_link.pause = 0;
- f_link.asym_pause = 0;
- /* no PHY for XFI */
- fdt_delprop(fdt, offset, "phy-handle");
- fdt_setprop(fdt, offset, "fixed-link", &f_link,
- sizeof(f_link));
+ /*
+ * if the 10G is XFI, check hwconfig to see what is the
+ * media type, there are two types, fiber or copper,
+ * fix the dtb accordingly.
+ */
+ switch (port) {
+ case FM1_10GEC1:
+ if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g1")) {
+ /* it's MAC9 */
+ media_type = 1;
+ fdt_set_phy_handle(fdt, compat, addr,
+ "phy_xfi9");
+ fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio9");
+ sprintf(buf, "%s%s%s", buf, "lane-a,",
+ (char *)lane_mode[1]);
+ }
+ break;
+ case FM1_10GEC2:
+ if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g2")) {
+ /* it's MAC10 */
+ media_type = 1;
+ fdt_set_phy_handle(fdt, compat, addr,
+ "phy_xfi10");
+ fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio10");
+ sprintf(buf, "%s%s%s", buf, "lane-b,",
+ (char *)lane_mode[1]);
+ }
+ break;
+ case FM1_10GEC3:
+ if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g3")) {
+ /* it's MAC1 */
+ media_type = 1;
+ fdt_set_phy_handle(fdt, compat, addr,
+ "phy_xfi1");
+ fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio1");
+ sprintf(buf, "%s%s%s", buf, "lane-c,",
+ (char *)lane_mode[1]);
+ }
+ break;
+ case FM1_10GEC4:
+ if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g4")) {
+ /* it's MAC2 */
+ media_type = 1;
+ fdt_set_phy_handle(fdt, compat, addr,
+ "phy_xfi2");
+ fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio2");
+ sprintf(buf, "%s%s%s", buf, "lane-d,",
+ (char *)lane_mode[1]);
+ }
+ break;
+ default:
+ return;
+ }
+
+ if (!media_type) {
+ /* fixed-link is used for XFI fiber cable */
+ f_link.phy_id = port;
+ f_link.duplex = 1;
+ f_link.link_speed = 10000;
+ f_link.pause = 0;
+ f_link.asym_pause = 0;
+ fdt_delprop(fdt, offset, "phy-handle");
+ fdt_setprop(fdt, offset, "fixed-link", &f_link,
+ sizeof(f_link));
+ } else {
+ /* set property for copper cable */
+ off = fdt_node_offset_by_compat_reg(fdt,
+ "fsl,fman-memac-mdio", addr + 0x1000);
+ fdt_setprop_string(fdt, off,
+ "lane-instance", buf);
+ }
break;
default:
break;