MA-9409-3 Add base board support for android and android things.

* add board support for android and android things.
  mx6ul_nxpu_iopb, pico-6ul, pico-imx7d, aquila-6ul
  reorganize the Kconfig, and fix the redefine issue.
* add android configure into configure-while
* add a common file mx_android_common.h
  it will be included by android and android things.
  defconfig only include ANDROID_THINGS_SUPPORT or ANDROID_SUPPORT
* move partition_table_valid into f_fastboot.c.
  it's a common code.
* add invalidate_dcache_range in fixed order.
  It will have salt invalid issue if we do not add it in order
* add display for pico-7d.

Change-Id: I6f8a4876c2f8bbd098034d1e3f53033109300bca
Signed-off-by: zhang sanshan <sanshan.zhang@nxp.com>

6 files changed, 928 insertions, 0 deletions

diff --git a/board/freescale/mx6ul_nxpu_iopb/Kconfig b/board/freescale/mx6ul_nxpu_iopb/Kconfig
new file mode 100644
index 0000000..8141c05
--- /dev/null
+++ b/board/freescale/mx6ul_nxpu_iopb/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_MX6UL_NXPU_IOPB
+
+config SYS_BOARD
+	default "mx6ul_nxpu_iopb"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "mx6"
+
+config SYS_CONFIG_NAME
+	default "mx6ul_nxpu_iopb"
+
+endif
diff --git a/board/freescale/mx6ul_nxpu_iopb/MAINTAINERS b/board/freescale/mx6ul_nxpu_iopb/MAINTAINERS
new file mode 100644
index 0000000..600c000
--- /dev/null
+++ b/board/freescale/mx6ul_nxpu_iopb/MAINTAINERS
@@ -0,0 +1,6 @@
+MX6ULIOPB BOARD
+M:	Fang Hui <hui.fang@nxp.com>
+S:	Maintained
+F:	board/freescale/mx6ul_nxpu_iopb/
+F:	include/configs/mx6ul_nxpu_iopb.h
+F:	configs/mx6ul_nxpu_iopb_defconfig
diff --git a/board/freescale/mx6ul_nxpu_iopb/Makefile b/board/freescale/mx6ul_nxpu_iopb/Makefile
new file mode 100644
index 0000000..2fdac8d
--- /dev/null
+++ b/board/freescale/mx6ul_nxpu_iopb/Makefile
@@ -0,0 +1,10 @@
+# (C) Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := mx6ul_nxpu_iopb.o
+
+extra-$(CONFIG_USE_PLUGIN) :=  plugin.bin
+$(obj)/plugin.bin: $(obj)/plugin.o
+	$(OBJCOPY) -O binary --gap-fill 0xff $< $@
diff --git a/board/freescale/mx6ul_nxpu_iopb/imximage.cfg b/board/freescale/mx6ul_nxpu_iopb/imximage.cfg
new file mode 100644
index 0000000..a45ff0d
--- /dev/null
+++ b/board/freescale/mx6ul_nxpu_iopb/imximage.cfg
@@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi/sd/nand/onenand, qspi/nor
+ */
+
+#ifdef CONFIG_SYS_BOOT_QSPI
+BOOT_FROM	qspi
+#elif defined(CONFIG_SYS_BOOT_EIMNOR)
+BOOT_FROM	nor
+#else
+BOOT_FROM	sd
+#endif
+
+#ifdef CONFIG_USE_PLUGIN
+/*PLUGIN    plugin-binary-file    IRAM_FREE_START_ADDR*/
+PLUGIN	board/freescale/mx6ul_nxpu_iopb/plugin.bin 0x00907000
+#else
+
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+#ifdef CONFIG_DDR3L_MT41K256M16HA
+
+/* DDR type MT41K256M16HA-125 which is EOL */
+
+/* Enable all clocks */
+DATA 4 0x020c4068 0xffffffff
+DATA 4 0x020c406c 0xffffffff
+DATA 4 0x020c4070 0xffffffff
+DATA 4 0x020c4074 0xffffffff
+DATA 4 0x020c4078 0xffffffff
+DATA 4 0x020c407c 0xffffffff
+DATA 4 0x020c4080 0xffffffff
+
+DATA 4 0x020E04B4 0x000C0000
+DATA 4 0x020E04AC 0x00000000
+DATA 4 0x020E027C 0x00000030
+DATA 4 0x020E0250 0x00000030
+DATA 4 0x020E024C 0x00000030
+DATA 4 0x020E0490 0x00000030
+DATA 4 0x020E0288 0x00000030
+DATA 4 0x020E0270 0x00000000
+DATA 4 0x020E0260 0x00000030
+DATA 4 0x020E0264 0x00000030
+DATA 4 0x020E04A0 0x00000030
+DATA 4 0x020E0494 0x00020000
+DATA 4 0x020E0280 0x00000030
+DATA 4 0x020E0284 0x00000030
+DATA 4 0x020E04B0 0x00020000
+DATA 4 0x020E0498 0x00000030
+DATA 4 0x020E04A4 0x00000030
+DATA 4 0x020E0244 0x00000030
+DATA 4 0x020E0248 0x00000030
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B080C 0x00000000
+DATA 4 0x021B083C 0x41490145
+DATA 4 0x021B0848 0x40404546
+DATA 4 0x021B0850 0x4040524D
+DATA 4 0x021B081C 0x33333333
+DATA 4 0x021B0820 0x33333333
+DATA 4 0x021B082C 0xf3333333
+DATA 4 0x021B0830 0xf3333333
+DATA 4 0x021B08C0 0x00921012
+DATA 4 0x021B08b8 0x00000800
+DATA 4 0x021B0004 0x0002002D
+DATA 4 0x021B0008 0x00333030
+DATA 4 0x021B000C 0x676B52F3
+DATA 4 0x021B0010 0xB66D8B63
+DATA 4 0x021B0014 0x01FF00DB
+DATA 4 0x021B0018 0x00201740
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B002C 0x000026D2
+DATA 4 0x021B0030 0x006B1023
+DATA 4 0x021B0040 0x0000004F
+DATA 4 0x021B0000 0x84180000
+DATA 4 0x021B001C 0x02008032
+DATA 4 0x021B001C 0x00008033
+DATA 4 0x021B001C 0x00048031
+DATA 4 0x021B001C 0x15208030
+DATA 4 0x021B001C 0x04008040
+DATA 4 0x021B0020 0x00000800
+DATA 4 0x021B0818 0x00000227
+DATA 4 0x021B0004 0x0002552D
+DATA 4 0x021B0404 0x00011006
+DATA 4 0x021B001C 0x00000000
+
+#else
+
+/* New DDR type MT41K256M16TW-107 */
+
+/* Enable all clocks */
+DATA 4 0x020c4068 0xffffffff
+DATA 4 0x020c406c 0xffffffff
+DATA 4 0x020c4070 0xffffffff
+DATA 4 0x020c4074 0xffffffff
+DATA 4 0x020c4078 0xffffffff
+DATA 4 0x020c407c 0xffffffff
+DATA 4 0x020c4080 0xffffffff
+
+DATA 4 0x020E04B4 0x000C0000
+DATA 4 0x020E04AC 0x00000000
+DATA 4 0x020E027C 0x00000030
+DATA 4 0x020E0250 0x00000030
+DATA 4 0x020E024C 0x00000030
+DATA 4 0x020E0490 0x00000030
+DATA 4 0x020E0288 0x00000030
+DATA 4 0x020E0270 0x00000000
+DATA 4 0x020E0260 0x00000030
+DATA 4 0x020E0264 0x00000030
+DATA 4 0x020E04A0 0x00000030
+DATA 4 0x020E0494 0x00020000
+DATA 4 0x020E0280 0x00000030
+DATA 4 0x020E0284 0x00000030
+DATA 4 0x020E04B0 0x00020000
+DATA 4 0x020E0498 0x00000030
+DATA 4 0x020E04A4 0x00000030
+DATA 4 0x020E0244 0x00000030
+DATA 4 0x020E0248 0x00000030
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B080C 0x00000000
+DATA 4 0x021B083C 0x41570155
+DATA 4 0x021B0848 0x4040474A
+DATA 4 0x021B0850 0x40405550
+DATA 4 0x021B081C 0x33333333
+DATA 4 0x021B0820 0x33333333
+DATA 4 0x021B082C 0xf3333333
+DATA 4 0x021B0830 0xf3333333
+DATA 4 0x021B08C0 0x00921012
+DATA 4 0x021B08b8 0x00000800
+DATA 4 0x021B0004 0x0002002D
+DATA 4 0x021B0008 0x1B333030
+DATA 4 0x021B000C 0x676B52F3
+DATA 4 0x021B0010 0xB66D0B63
+DATA 4 0x021B0014 0x01FF00DB
+DATA 4 0x021B0018 0x00201740
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B002C 0x000026D2
+DATA 4 0x021B0030 0x006B1023
+DATA 4 0x021B0040 0x0000004F
+DATA 4 0x021B0000 0x84180000
+DATA 4 0x021B0890 0x23400A38
+DATA 4 0x021B001C 0x02008032
+DATA 4 0x021B001C 0x00008033
+DATA 4 0x021B001C 0x00048031
+DATA 4 0x021B001C 0x15208030
+DATA 4 0x021B001C 0x04008040
+DATA 4 0x021B0020 0x00000800
+DATA 4 0x021B0818 0x00000227
+DATA 4 0x021B0004 0x0002552D
+DATA 4 0x021B0404 0x00011006
+DATA 4 0x021B001C 0x00000000
+#endif
+
+#endif
diff --git a/board/freescale/mx6ul_nxpu_iopb/mx6ul_nxpu_iopb.c b/board/freescale/mx6ul_nxpu_iopb/mx6ul_nxpu_iopb.c
new file mode 100644
index 0000000..7bec9fc
--- /dev/null
+++ b/board/freescale/mx6ul_nxpu_iopb/mx6ul_nxpu_iopb.c
@@ -0,0 +1,572 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <asm/io.h>
+#include <common.h>
+#include <fsl_esdhc.h>
+#include <i2c.h>
+#include <linux/sizes.h>
+#include <linux/fb.h>
+#include <miiphy.h>
+#include <mmc.h>
+#include <mxsfb.h>
+#include <netdev.h>
+#include <usb.h>
+#include <usb/ehci-ci.h>
+
+#ifdef CONFIG_POWER
+#include <power/pmic.h>
+#include <power/pfuze3000_pmic.h>
+#include "../common/pfuze.h"
+#endif
+
+#ifdef CONFIG_FSL_FASTBOOT
+#include <fsl_fastboot.h>
+#ifdef CONFIG_ANDROID_RECOVERY
+#include <recovery.h>
+#endif
+#endif /*CONFIG_FSL_FASTBOOT*/
+
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_22K_UP  | PAD_CTL_SPEED_LOW |		\
+	PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define USDHC_DAT3_CD_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_100K_DOWN  | PAD_CTL_SPEED_LOW |		\
+	PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+
+#define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE |     \
+	PAD_CTL_SPEED_HIGH   |                                   \
+	PAD_CTL_DSE_48ohm   | PAD_CTL_SRE_FAST)
+
+#define MDIO_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE |     \
+	PAD_CTL_DSE_48ohm   | PAD_CTL_SRE_FAST | PAD_CTL_ODE)
+
+
+#define ENET_CLK_PAD_CTRL  (PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST)
+
+#define ENET_RX_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |          \
+	PAD_CTL_SPEED_HIGH   | PAD_CTL_SRE_FAST)
+
+#define I2C_PAD_CTRL    (PAD_CTL_PKE | PAD_CTL_PUE |            \
+	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
+	PAD_CTL_DSE_40ohm | PAD_CTL_HYS |			\
+	PAD_CTL_ODE)
+
+#define LCD_PAD_CTRL    (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
+	PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
+
+#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
+			PAD_CTL_SRE_FAST)
+#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
+
+#define WEIM_NOR_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+		PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+		PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST)
+
+#define SPI_PAD_CTRL (PAD_CTL_HYS |				\
+	PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+#define OTG_ID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW |		\
+	PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#ifdef CONFIG_SYS_I2C_MXC
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+/* I2C1 for PMIC and EEPROM */
+struct i2c_pads_info i2c_pad_info1 = {
+	.scl = {
+		.i2c_mode =  MX6_PAD_GPIO1_IO02__I2C1_SCL | PC,
+		.gpio_mode = MX6_PAD_GPIO1_IO02__GPIO1_IO02 | PC,
+		.gp = IMX_GPIO_NR(1, 2),
+	},
+	.sda = {
+		.i2c_mode = MX6_PAD_GPIO1_IO03__I2C1_SDA | PC,
+		.gpio_mode = MX6_PAD_GPIO1_IO03__GPIO1_IO03 | PC,
+		.gp = IMX_GPIO_NR(1, 3),
+	},
+};
+#endif
+
+int dram_init(void)
+{
+	gd->ram_size = PHYS_SDRAM_SIZE;
+
+	return 0;
+}
+
+static iomux_v3_cfg_t const uart3_pads[] = {
+	MX6_PAD_UART3_TX_DATA__UART3_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6_PAD_UART3_RX_DATA__UART3_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+	MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	MX6_PAD_NAND_READY_B__USDHC1_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_CE0_B__USDHC1_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_CE1_B__USDHC1_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_CLE__USDHC1_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	/* RST_B */
+	MX6_PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+	MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	/* CD */
+	MX6_PAD_CSI_MCLK__GPIO4_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#ifdef CONFIG_FEC_MXC
+/*
+ * pin conflicts for fec1 and fec2, GPIO1_IO06 and GPIO1_IO07 can only
+ * be used for ENET1 or ENET2, cannot be used for both.
+ */
+static iomux_v3_cfg_t const fec1_pads[] = {
+	MX6_PAD_ENET2_RX_DATA0__ENET1_MDIO | MUX_PAD_CTRL(MDIO_PAD_CTRL),		/* MDIO */
+	MX6_PAD_ENET2_RX_DATA1__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),		/* MDC */
+
+	MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_UART2_TX_DATA__ENET1_TDATA02 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_UART2_RX_DATA__ENET1_TDATA03 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET1_TX_EN__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET1_TX_CLK__ENET1_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+
+	MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_UART1_TX_DATA__ENET1_RDATA02 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_UART1_RX_DATA__ENET1_RDATA03 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET1_RX_ER__ENET1_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET1_RX_EN__ENET1_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_UART1_CTS_B__ENET1_RX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+
+	MX6_PAD_LCD_HSYNC__GPIO3_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),				/* RESET */
+	MX6_PAD_UART2_CTS_B__ENET1_CRS | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_UART2_RTS_B__ENET1_COL | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_iomux_fec(int fec_id)
+{
+	if (fec_id == 0)
+		imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
+	else
+		printf("Warning: fec_id %d, should be 0\n", fec_id);
+}
+#endif
+
+static void setup_iomux_uart(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+static struct fsl_esdhc_cfg usdhc_cfg[2] = {
+	{USDHC1_BASE_ADDR, 0, 8},
+	{USDHC2_BASE_ADDR, 0, 4},
+};
+
+#define USDHC2_CD_GPIO	IMX_GPIO_NR(4, 17)
+
+int board_mmc_get_env_dev(int devno)
+{
+	return devno;
+}
+
+int mmc_map_to_kernel_blk(int dev_no)
+{
+	if (dev_no == 0 && mx6_esdhc_fused(USDHC1_BASE_ADDR))
+		dev_no = 1;
+
+	return dev_no;
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	switch (cfg->esdhc_base) {
+	case USDHC1_BASE_ADDR:
+		ret = 1;
+		break;
+	case USDHC2_BASE_ADDR:
+		ret = !gpio_get_value(USDHC2_CD_GPIO);
+		break;
+	}
+
+	return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int i, ret;
+
+	/*
+	 * According to the board_mmc_init() the following map is done:
+	 * (U-boot device node)    (Physical Port)
+	 * mmc0                    USDHC1
+	 * mmc1                    USDHC2
+	 */
+	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+		switch (i) {
+		case 0:
+			imx_iomux_v3_setup_multiple_pads(
+				usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+			break;
+		case 1:
+			imx_iomux_v3_setup_multiple_pads(
+				usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+			gpio_direction_input(USDHC2_CD_GPIO);
+			usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+			break;
+		default:
+			printf("Warning: you configured more USDHC controllers"
+				"(%d) than supported by the board\n", i + 1);
+			return -EINVAL;
+			}
+
+			ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+			if (ret) {
+				printf("Warning: failed to initialize mmc dev %d\n", i);
+			}
+	}
+
+	return 0;
+}
+
+int check_mmc_autodetect(void)
+{
+	char *autodetect_str = getenv("mmcautodetect");
+
+	if ((autodetect_str != NULL) &&
+		(strcmp(autodetect_str, "yes") == 0)) {
+		return 1;
+	}
+
+	return 0;
+}
+
+void board_late_mmc_init(void)
+{
+	char cmd[32];
+	char mmcblk[32];
+	u32 dev_no = mmc_get_env_dev();
+
+	if (!check_mmc_autodetect())
+		return;
+
+	setenv_ulong("mmcdev", dev_no);
+
+	/* Set mmcblk env */
+	sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw",
+		mmc_map_to_kernel_blk(dev_no));
+	setenv("mmcroot", mmcblk);
+
+	sprintf(cmd, "mmc dev %d", dev_no);
+	run_command(cmd, 0);
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+int board_eth_init(bd_t *bis)
+{
+	int ret;
+
+	setup_iomux_fec(CONFIG_FEC_ENET_DEV);
+
+	ret = fecmxc_initialize_multi(bis, CONFIG_FEC_ENET_DEV,
+		CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
+	if (ret)
+		printf("FEC%d MXC: %s:failed\n", CONFIG_FEC_ENET_DEV, __func__);
+
+	return 0;
+}
+
+static int setup_fec(int fec_id)
+{
+	struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs
+		= (struct iomuxc_gpr_base_regs *) IOMUXC_GPR_BASE_ADDR;
+	int ret;
+
+	if (0 == fec_id) {
+		if (check_module_fused(MX6_MODULE_ENET1))
+			return -1;
+
+		/* Use 50M anatop loopback REF_CLK1 for ENET1, clear gpr1[17](ENET1_TX_CLK),
+			set gpr1[13](ENET1_CLK_SEL) */
+		clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], IOMUX_GPR1_FEC1_MASK,
+				IOMUX_GPR1_FEC1_CLOCK_MUX2_SEL_MASK);
+	} else {
+		if (check_module_fused(MX6_MODULE_ENET2))
+			return -1;
+
+		/* Use 50M anatop loopback REF_CLK2 for ENET2, clear gpr1[14], set gpr1[18]*/
+		clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], IOMUX_GPR1_FEC2_MASK,
+				IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK);
+	}
+
+	ret = enable_fec_anatop_clock(fec_id, ENET_50MHZ);
+	if (ret)
+		return ret;
+
+	enable_enet_clk(1);
+
+	return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x8190);
+
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI_MX6
+#define USB_OTHERREGS_OFFSET	0x800
+#define UCTRL_PWR_POL		(1 << 9)
+
+iomux_v3_cfg_t const usb_otg1_pads[] = {
+	MX6_PAD_GPIO1_IO04__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_GPIO1_IO00__ANATOP_OTG1_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
+};
+
+/*
+ * Leave it here, but default configuration only supports 1 port now,
+ * because we need sd1 and i2c1
+ */
+iomux_v3_cfg_t const usb_otg2_pads[] = {
+	MX6_PAD_ENET2_TX_DATA1__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+/* At default the 3v3 enables the MIC2026 for VBUS power */
+static void setup_usb(void)
+{
+	imx_iomux_v3_setup_multiple_pads(usb_otg1_pads,
+					 ARRAY_SIZE(usb_otg1_pads));
+
+	imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
+					 ARRAY_SIZE(usb_otg2_pads));
+}
+
+int board_usb_phy_mode(int port)
+{
+	if (port == 1)
+		return USB_INIT_HOST;
+	else
+		return usb_phy_mode(port);
+}
+
+int board_ehci_hcd_init(int port)
+{
+	u32 *usbnc_usb_ctrl;
+
+	if (port > 1)
+		return -EINVAL;
+
+	usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
+				 port * 4);
+
+	/* Set Power polarity */
+	setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
+
+	return 0;
+}
+#endif
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+	return 0;
+}
+
+#ifdef CONFIG_POWER
+#define I2C_PMIC	0
+static struct pmic *pfuze;
+int power_init_board(void)
+{
+	int ret;
+	unsigned int reg, rev_id;
+
+	ret = power_pfuze3000_init(I2C_PMIC);
+	if (ret)
+		return ret;
+
+	pfuze = pmic_get("PFUZE3000");
+	ret = pmic_probe(pfuze);
+	if (ret)
+		return ret;
+
+	pmic_reg_read(pfuze, PFUZE3000_DEVICEID, &reg);
+	pmic_reg_read(pfuze, PFUZE3000_REVID, &rev_id);
+	printf("PMIC: PFUZE300 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
+
+	/* disable Low Power Mode during standby mode */
+	pmic_reg_read(pfuze, PFUZE3000_LDOGCTL, &reg);
+	reg |= 0x1;
+	pmic_reg_write(pfuze, PFUZE3000_LDOGCTL, reg);
+
+	/* SW1B step ramp up time from 2us to 4us/25mV */
+	reg = 0x40;
+	pmic_reg_write(pfuze, PFUZE3000_SW1BCONF, reg);
+
+	/* SW1B mode to APS/PFM */
+	reg = 0xc;
+	pmic_reg_write(pfuze, PFUZE3000_SW1BMODE, reg);
+
+	/* SW1B standby voltage set to 0.975V */
+	reg = 0xb;
+	pmic_reg_write(pfuze, PFUZE3000_SW1BSTBY, reg);
+
+	return 0;
+}
+
+#ifdef CONFIG_LDO_BYPASS_CHECK
+void ldo_mode_set(int ldo_bypass)
+{
+	unsigned int value;
+	u32 vddarm;
+
+	struct pmic *p = pfuze;
+
+	if (!p) {
+		printf("No PMIC found!\n");
+		return;
+	}
+
+	/* switch to ldo_bypass mode */
+	if (ldo_bypass) {
+		prep_anatop_bypass();
+		/* decrease VDDARM to 1.275V */
+		pmic_reg_read(pfuze, PFUZE300_SW1BVOLT, &value);
+		value &= ~0x1f;
+		value |= PFUZE300_SW1AB_SETP(1275);
+		pmic_reg_write(pfuze, PFUZE300_SW1BVOLT, value);
+
+		set_anatop_bypass(1);
+		vddarm = PFUZE300_SW1AB_SETP(1175);
+
+		pmic_reg_read(pfuze, PFUZE300_SW1BVOLT, &value);
+		value &= ~0x1f;
+		value |= vddarm;
+		pmic_reg_write(pfuze, PFUZE300_SW1BVOLT, value);
+
+		finish_anatop_bypass();
+
+		printf("switch to ldo_bypass mode!\n");
+	}
+}
+#endif
+#endif
+
+int board_init(void)
+{
+	/* Address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	gpio_direction_output(IMX_GPIO_NR(3, 2) , 0);
+	udelay(500);
+	gpio_direction_output(IMX_GPIO_NR(3, 2) , 1);
+
+#ifdef CONFIG_SYS_I2C_MXC
+	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+#endif
+
+#ifdef	CONFIG_FEC_MXC
+	setup_fec(CONFIG_FEC_ENET_DEV);
+#endif
+
+#ifdef CONFIG_USB_EHCI_MX6
+	setup_usb();
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"sd1", MAKE_CFGVAL(0x42, 0x20, 0x00, 0x00)},
+	{"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+	{NULL,	 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+	board_late_mmc_init();
+#endif
+
+	set_wdog_reset((struct wdog_regs *)WDOG1_BASE_ADDR);
+
+	return 0;
+}
+
+u32 get_board_rev(void)
+{
+	return get_cpu_rev();
+}
+
+int checkboard(void)
+{
+	puts("Board: MX6UL NXPU IOPB\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_FSL_FASTBOOT
+#ifdef CONFIG_ANDROID_RECOVERY
+int is_recovery_key_pressing(void)
+{
+	/* No key defined for this board */
+	return 0;
+}
+#endif /*CONFIG_ANDROID_RECOVERY*/
+#endif /*CONFIG_FSL_FASTBOOT*/
diff --git a/board/freescale/mx6ul_nxpu_iopb/plugin.S b/board/freescale/mx6ul_nxpu_iopb/plugin.S
new file mode 100755
index 0000000..0c49b35
--- /dev/null
+++ b/board/freescale/mx6ul_nxpu_iopb/plugin.S
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <config.h>
+
+/* DDR script */
+.macro imx6ul_ddr3_iopb_setting
+	ldr r0, =IOMUXC_BASE_ADDR
+	ldr r1, =0x000C0000
+	str r1, [r0, #0x4B4]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x4AC]
+	ldr r1, =0x00000030
+	str r1, [r0, #0x27C]
+	ldr r1, =0x00000030
+	str r1, [r0, #0x250]
+	str r1, [r0, #0x24C]
+	str r1, [r0, #0x490]
+	str r1, [r0, #0x288]
+
+	ldr r1, =0x00000000
+	str r1, [r0, #0x270]
+
+	ldr r1, =0x00000030
+	str r1, [r0, #0x260]
+	str r1, [r0, #0x264]
+	str r1, [r0, #0x4A0]
+
+	ldr r1, =0x00020000
+	str r1, [r0, #0x494]
+
+	ldr r1, =0x00000030
+	str r1, [r0, #0x280]
+	ldr r1, =0x00000030
+	str r1, [r0, #0x284]
+
+	ldr r1, =0x00020000
+	str r1, [r0, #0x4B0]
+
+	ldr r1, =0x00000030
+	str r1, [r0, #0x498]
+	str r1, [r0, #0x4A4]
+	str r1, [r0, #0x244]
+	str r1, [r0, #0x248]
+
+	ldr r0, =MMDC_P0_BASE_ADDR
+	ldr r1, =0x00008000
+	str r1, [r0, #0x1C]
+	ldr r1, =0xA1390003
+	str r1, [r0, #0x800]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x80C]
+	ldr r1, =0x41570155
+	str r1, [r0, #0x83C]
+	ldr r1, =0x4040474A
+	str r1, [r0, #0x848]
+	ldr r1, =0x40405550
+	str r1, [r0, #0x850]
+	ldr r1, =0x33333333
+	str r1, [r0, #0x81C]
+	str r1, [r0, #0x820]
+	ldr r1, =0xF3333333
+	str r1, [r0, #0x82C]
+	str r1, [r0, #0x830]
+	ldr r1, =0x00921012
+	str r1, [r0, #0x8C0]
+	ldr r1, =0x00000800
+	str r1, [r0, #0x8B8]
+	ldr r1, =0x0002002D
+	str r1, [r0, #0x004]
+	ldr r1, =0x1B333030
+	str r1, [r0, #0x008]
+	ldr r1, =0x676B52F3
+	str r1, [r0, #0x00C]
+	ldr r1, =0xB66D0B63
+	str r1, [r0, #0x010]
+	ldr r1, =0x01FF00DB
+	str r1, [r0, #0x014]
+	ldr r1, =0x00201740
+	str r1, [r0, #0x018]
+	ldr r1, =0x00008000
+	str r1, [r0, #0x01C]
+	ldr r1, =0x000026D2
+	str r1, [r0, #0x02C]
+	ldr r1, =0x006B1023
+	str r1, [r0, #0x030]
+	ldr r1, =0x0000004F
+	str r1, [r0, #0x040]
+	ldr r1, =0x84180000
+	str r1, [r0, #0x000]
+	ldr r1, =0x23400A38
+	str r1, [r0, #0x890]
+	ldr r1, =0x02008032
+	str r1, [r0, #0x01C]
+	ldr r1, =0x00008033
+	str r1, [r0, #0x01C]
+	ldr r1, =0x00048031
+	str r1, [r0, #0x01C]
+	ldr r1, =0x15208030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x04008040
+	str r1, [r0, #0x01C]
+	ldr r1, =0x00000800
+	str r1, [r0, #0x020]
+	ldr r1, =0x00000227
+	str r1, [r0, #0x818]
+	ldr r1, =0x0002552D
+	str r1, [r0, #0x004]
+	ldr r1, =0x00011006
+	str r1, [r0, #0x404]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x01C]
+.endm
+
+.macro imx6_clock_gating
+	ldr r0, =CCM_BASE_ADDR
+	ldr r1, =0xFFFFFFFF
+	str r1, [r0, #0x68]
+	str r1, [r0, #0x6C]
+	str r1, [r0, #0x70]
+	str r1, [r0, #0x74]
+	str r1, [r0, #0x78]
+	str r1, [r0, #0x7C]
+	str r1, [r0, #0x80]
+.endm
+
+.macro imx6_qos_setting
+.endm
+
+.macro imx6_ddr_setting
+	imx6ul_ddr3_iopb_setting
+.endm
+
+/* include the common plugin code here */
+#include <asm/arch/mx6_plugin.S>