ENGR00223037 fsl: Add new board HDMI dongle for imx6 Q/DL.

Add HDMIdongle board for imx6Q/DL under board/freescale.

Signed-off-by: Zhang Xiaodong <B39117@freescale.com>

6 files changed, 2053 insertions, 0 deletions

diff --git a/board/freescale/mx6q_hdmidongle/Makefile b/board/freescale/mx6q_hdmidongle/Makefile
new file mode 100644
index 0000000..1d63462
--- /dev/null
+++ b/board/freescale/mx6q_hdmidongle/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2012 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o
+SOBJS	:= lowlevel_init.o flash_header.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mx6q_hdmidongle/config.mk b/board/freescale/mx6q_hdmidongle/config.mk
new file mode 100644
index 0000000..a0ce2a1
--- /dev/null
+++ b/board/freescale/mx6q_hdmidongle/config.mk
@@ -0,0 +1,7 @@
+LDSCRIPT := $(SRCTREE)/board/$(VENDOR)/$(BOARD)/u-boot.lds
+
+sinclude $(OBJTREE)/board/$(VENDOR)/$(BOARD)/config.tmp
+
+ifndef TEXT_BASE
+	TEXT_BASE = 0x27800000
+endif
diff --git a/board/freescale/mx6q_hdmidongle/flash_header.S b/board/freescale/mx6q_hdmidongle/flash_header.S
new file mode 100644
index 0000000..9ca5d0e
--- /dev/null
+++ b/board/freescale/mx6q_hdmidongle/flash_header.S
@@ -0,0 +1,306 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/mx6.h>
+
+#ifdef	CONFIG_FLASH_HEADER
+#ifndef CONFIG_FLASH_HEADER_OFFSET
+# error "Must define the offset of flash header"
+#endif
+
+#define CPU_2_BE_32(l) \
+       ((((l) & 0x000000FF) << 24) | \
+	(((l) & 0x0000FF00) << 8)  | \
+	(((l) & 0x00FF0000) >> 8)  | \
+	(((l) & 0xFF000000) >> 24))
+
+#define MXC_DCD_ITEM(i, addr, val)   \
+dcd_node_##i:                        \
+        .word CPU_2_BE_32(addr) ;     \
+        .word CPU_2_BE_32(val)  ;     \
+
+.section ".text.flasheader", "x"
+	b	_start
+	.org	CONFIG_FLASH_HEADER_OFFSET
+
+ivt_header:       .word 0x402000D1 /* Tag=0xD1, Len=0x0020, Ver=0x40 */
+app_code_jump_v:  .word _start
+reserv1:          .word 0x0
+dcd_ptr:          .word dcd_hdr
+boot_data_ptr:	  .word boot_data
+self_ptr:         .word ivt_header
+app_code_csf:     .word 0x0
+reserv2:          .word 0x0
+
+boot_data:        .word TEXT_BASE
+image_len:        .word _end_of_copy  - TEXT_BASE + CONFIG_FLASH_HEADER_OFFSET
+plugin:           .word 0x0
+
+#if defined CONFIG_MX6DL_DDR3
+dcd_hdr:          .word 0x40E002D2 /* Tag=0xD2, Len=91*8 + 4 + 4, Ver=0x40 */
+write_dcd_cmd:    .word 0x04DC02CC /* Tag=0xCC, Len=91*8 + 4, Param=0x04 */
+
+# IOMUXC_BASE_ADDR  = 0x20e0000
+# DDR IO TYPE
+MXC_DCD_ITEM(1, IOMUXC_BASE_ADDR + 0x774, 0x000c0000)
+MXC_DCD_ITEM(2, IOMUXC_BASE_ADDR + 0x754, 0x00000000)
+# Clock
+MXC_DCD_ITEM(3, IOMUXC_BASE_ADDR + 0x4ac, 0x00000030)
+MXC_DCD_ITEM(4, IOMUXC_BASE_ADDR + 0x4b0, 0x00000030)
+# Address
+MXC_DCD_ITEM(5, IOMUXC_BASE_ADDR + 0x464, 0x00000030)
+MXC_DCD_ITEM(6, IOMUXC_BASE_ADDR + 0x490, 0x00000030)
+MXC_DCD_ITEM(7, IOMUXC_BASE_ADDR + 0x74c, 0x00000030)
+# Control
+MXC_DCD_ITEM(8, IOMUXC_BASE_ADDR + 0x494, 0x00000030)
+MXC_DCD_ITEM(9, IOMUXC_BASE_ADDR + 0x4a4, 0x00003000)
+MXC_DCD_ITEM(10, IOMUXC_BASE_ADDR + 0x4a8, 0x00003000)
+MXC_DCD_ITEM(11, IOMUXC_BASE_ADDR + 0x4a0, 0x00000000)
+MXC_DCD_ITEM(12, IOMUXC_BASE_ADDR + 0x4b4, 0x00003030)
+MXC_DCD_ITEM(13, IOMUXC_BASE_ADDR + 0x4b8, 0x00003030)
+MXC_DCD_ITEM(14, IOMUXC_BASE_ADDR + 0x76c, 0x00000030)
+# Data Strobe
+MXC_DCD_ITEM(15, IOMUXC_BASE_ADDR + 0x750, 0x00020000)
+
+MXC_DCD_ITEM(16, IOMUXC_BASE_ADDR + 0x4bc, 0x00000030)
+MXC_DCD_ITEM(17, IOMUXC_BASE_ADDR + 0x4c0, 0x00000030)
+MXC_DCD_ITEM(18, IOMUXC_BASE_ADDR + 0x4c4, 0x00000030)
+MXC_DCD_ITEM(19, IOMUXC_BASE_ADDR + 0x4c8, 0x00000030)
+MXC_DCD_ITEM(20, IOMUXC_BASE_ADDR + 0x4cc, 0x00000030)
+MXC_DCD_ITEM(21, IOMUXC_BASE_ADDR + 0x4d0, 0x00000030)
+MXC_DCD_ITEM(22, IOMUXC_BASE_ADDR + 0x4d4, 0x00000030)
+MXC_DCD_ITEM(23, IOMUXC_BASE_ADDR + 0x4d8, 0x00000030)
+# DATA
+MXC_DCD_ITEM(24, IOMUXC_BASE_ADDR + 0x760, 0x00020000)
+
+MXC_DCD_ITEM(25, IOMUXC_BASE_ADDR + 0x764, 0x00000030)
+MXC_DCD_ITEM(26, IOMUXC_BASE_ADDR + 0x770, 0x00000030)
+MXC_DCD_ITEM(27, IOMUXC_BASE_ADDR + 0x778, 0x00000030)
+MXC_DCD_ITEM(28, IOMUXC_BASE_ADDR + 0x77c, 0x00000030)
+MXC_DCD_ITEM(29, IOMUXC_BASE_ADDR + 0x780, 0x00000030)
+MXC_DCD_ITEM(30, IOMUXC_BASE_ADDR + 0x784, 0x00000030)
+MXC_DCD_ITEM(31, IOMUXC_BASE_ADDR + 0x78c, 0x00000030)
+MXC_DCD_ITEM(32, IOMUXC_BASE_ADDR + 0x748, 0x00000030)
+
+MXC_DCD_ITEM(33, IOMUXC_BASE_ADDR + 0x470, 0x00000030)
+MXC_DCD_ITEM(34, IOMUXC_BASE_ADDR + 0x474, 0x00000030)
+MXC_DCD_ITEM(35, IOMUXC_BASE_ADDR + 0x478, 0x00000030)
+MXC_DCD_ITEM(36, IOMUXC_BASE_ADDR + 0x47c, 0x00000030)
+MXC_DCD_ITEM(37, IOMUXC_BASE_ADDR + 0x480, 0x00000030)
+MXC_DCD_ITEM(38, IOMUXC_BASE_ADDR + 0x484, 0x00000030)
+MXC_DCD_ITEM(39, IOMUXC_BASE_ADDR + 0x488, 0x00000030)
+MXC_DCD_ITEM(40, IOMUXC_BASE_ADDR + 0x48c, 0x00000030)
+
+# MMDC_P0_BASE_ADDR = 0x021b0000
+# MMDC_P1_BASE_ADDR = 0x021b4000
+# Calibrations
+# ZQ
+MXC_DCD_ITEM(41, MMDC_P0_BASE_ADDR + 0x800, 0xa1390003)
+MXC_DCD_ITEM(42, MMDC_P1_BASE_ADDR + 0x800, 0xa1390003)
+# write leveling
+MXC_DCD_ITEM(43, MMDC_P0_BASE_ADDR + 0x80c, 0x001F001F)
+MXC_DCD_ITEM(44, MMDC_P0_BASE_ADDR + 0x810, 0x001F001F)
+MXC_DCD_ITEM(45, MMDC_P1_BASE_ADDR + 0x80c, 0x001F001F)
+MXC_DCD_ITEM(46, MMDC_P1_BASE_ADDR + 0x810, 0x001F001F)
+# DQS gating, read delay, write delay calibration values
+# based on calibration compare of 0x00ffff00
+MXC_DCD_ITEM(47, MMDC_P0_BASE_ADDR + 0x83c, 0x420E020E)
+MXC_DCD_ITEM(48, MMDC_P0_BASE_ADDR + 0x840, 0x02000200)
+MXC_DCD_ITEM(49, MMDC_P1_BASE_ADDR + 0x83C, 0x42020202)
+MXC_DCD_ITEM(50, MMDC_P1_BASE_ADDR + 0x840, 0x01720172)
+MXC_DCD_ITEM(51, MMDC_P0_BASE_ADDR + 0x848, 0x494C4F4C)
+MXC_DCD_ITEM(52, MMDC_P1_BASE_ADDR + 0x848, 0x4A4C4C49)
+MXC_DCD_ITEM(53, MMDC_P0_BASE_ADDR + 0x850, 0x3F3F3133)
+MXC_DCD_ITEM(54, MMDC_P1_BASE_ADDR + 0x850, 0x39373F2E)
+# read data bit delay
+MXC_DCD_ITEM(55, MMDC_P0_BASE_ADDR + 0x81c, 0x33333333)
+MXC_DCD_ITEM(56, MMDC_P0_BASE_ADDR + 0x820, 0x33333333)
+MXC_DCD_ITEM(57, MMDC_P0_BASE_ADDR + 0x824, 0x33333333)
+MXC_DCD_ITEM(58, MMDC_P0_BASE_ADDR + 0x828, 0x33333333)
+MXC_DCD_ITEM(59, MMDC_P1_BASE_ADDR + 0x81c, 0x33333333)
+MXC_DCD_ITEM(60, MMDC_P1_BASE_ADDR + 0x820, 0x33333333)
+MXC_DCD_ITEM(61, MMDC_P1_BASE_ADDR + 0x824, 0x33333333)
+MXC_DCD_ITEM(62, MMDC_P1_BASE_ADDR + 0x828, 0x33333333)
+# Complete calibration by forced measurment
+MXC_DCD_ITEM(63, MMDC_P0_BASE_ADDR + 0x8b8, 0x00000800)
+MXC_DCD_ITEM(64, MMDC_P1_BASE_ADDR + 0x8b8, 0x00000800)
+# MMDC init:
+# in DDR3, 64-bit mode, only MMDC0 is initiated:
+MXC_DCD_ITEM(65, MMDC_P0_BASE_ADDR + 0x004, 0x0002002d)
+MXC_DCD_ITEM(66, MMDC_P0_BASE_ADDR + 0x008, 0x00333030)
+
+MXC_DCD_ITEM(67, MMDC_P0_BASE_ADDR + 0x00c, 0x40445323)
+MXC_DCD_ITEM(68, MMDC_P0_BASE_ADDR + 0x010, 0xb66e8c63)
+
+MXC_DCD_ITEM(69, MMDC_P0_BASE_ADDR + 0x014, 0x01ff00db)
+MXC_DCD_ITEM(70, MMDC_P0_BASE_ADDR + 0x018, 0x00081740)
+MXC_DCD_ITEM(71, MMDC_P0_BASE_ADDR + 0x01c, 0x00008000)
+MXC_DCD_ITEM(72, MMDC_P0_BASE_ADDR + 0x02c, 0x000026d2)
+MXC_DCD_ITEM(73, MMDC_P0_BASE_ADDR + 0x030, 0x00440e21)
+MXC_DCD_ITEM(74, MMDC_P0_BASE_ADDR + 0x040, 0x00000027)
+MXC_DCD_ITEM(75, MMDC_P0_BASE_ADDR + 0x000, 0xc31a0000)
+
+# Initialize 2GB DDR3 - Micron MT41J128M
+# MR2
+MXC_DCD_ITEM(76, MMDC_P0_BASE_ADDR + 0x01c, 0x04008032)
+MXC_DCD_ITEM(77, MMDC_P0_BASE_ADDR + 0x01c, 0x0400803a)
+# MR3
+MXC_DCD_ITEM(78, MMDC_P0_BASE_ADDR + 0x01c, 0x00008033)
+MXC_DCD_ITEM(79, MMDC_P0_BASE_ADDR + 0x01c, 0x0000803b)
+# MR1
+MXC_DCD_ITEM(80, MMDC_P0_BASE_ADDR + 0x01c, 0x00428031)
+MXC_DCD_ITEM(81, MMDC_P0_BASE_ADDR + 0x01c, 0x00428039)
+# MR0
+MXC_DCD_ITEM(82, MMDC_P0_BASE_ADDR + 0x01c, 0x07208030)
+MXC_DCD_ITEM(83, MMDC_P0_BASE_ADDR + 0x01c, 0x07208038)
+# ZQ calibration
+MXC_DCD_ITEM(84, MMDC_P0_BASE_ADDR + 0x01c, 0x04008040)
+MXC_DCD_ITEM(85, MMDC_P0_BASE_ADDR + 0x01c, 0x04008048)
+# final DDR setup
+MXC_DCD_ITEM(86, MMDC_P0_BASE_ADDR + 0x020, 0x00005800)
+MXC_DCD_ITEM(87, MMDC_P0_BASE_ADDR + 0x818, 0x00000007)
+MXC_DCD_ITEM(88, MMDC_P1_BASE_ADDR + 0x818, 0x00000007)
+MXC_DCD_ITEM(89, MMDC_P0_BASE_ADDR + 0x004, 0x0002556d)
+MXC_DCD_ITEM(90, MMDC_P1_BASE_ADDR + 0x404, 0x00011006)
+MXC_DCD_ITEM(91, MMDC_P0_BASE_ADDR + 0x01c, 0x00000000)
+
+
+#else
+dcd_hdr:          .word 0x40D802D2 /* Tag=0xD2, Len=90*8 + 4 + 4, Ver=0x40 */
+write_dcd_cmd:    .word 0x04D402CC /* Tag=0xCC, Len=90*8 + 4, Param=0x04 */
+
+/* DCD */
+
+MXC_DCD_ITEM(1, IOMUXC_BASE_ADDR + 0x5a8, 0x00000030)
+MXC_DCD_ITEM(2, IOMUXC_BASE_ADDR + 0x5b0, 0x00000030)
+MXC_DCD_ITEM(3, IOMUXC_BASE_ADDR + 0x524, 0x00000030)
+MXC_DCD_ITEM(4, IOMUXC_BASE_ADDR + 0x51c, 0x00000030)
+
+MXC_DCD_ITEM(5, IOMUXC_BASE_ADDR + 0x518, 0x00000030)
+MXC_DCD_ITEM(6, IOMUXC_BASE_ADDR + 0x50c, 0x00000030)
+MXC_DCD_ITEM(7, IOMUXC_BASE_ADDR + 0x5b8, 0x00000030)
+MXC_DCD_ITEM(8, IOMUXC_BASE_ADDR + 0x5c0, 0x00000030)
+
+MXC_DCD_ITEM(9, IOMUXC_BASE_ADDR + 0x5ac, 0x00020030)
+MXC_DCD_ITEM(10, IOMUXC_BASE_ADDR + 0x5b4, 0x00020030)
+MXC_DCD_ITEM(11, IOMUXC_BASE_ADDR + 0x528, 0x00020030)
+MXC_DCD_ITEM(12, IOMUXC_BASE_ADDR + 0x520, 0x00020030)
+
+MXC_DCD_ITEM(13, IOMUXC_BASE_ADDR + 0x514, 0x00020030)
+MXC_DCD_ITEM(14, IOMUXC_BASE_ADDR + 0x510, 0x00020030)
+MXC_DCD_ITEM(15, IOMUXC_BASE_ADDR + 0x5bc, 0x00020030)
+MXC_DCD_ITEM(16, IOMUXC_BASE_ADDR + 0x5c4, 0x00020030)
+
+MXC_DCD_ITEM(17, IOMUXC_BASE_ADDR + 0x56c, 0x00020030)
+MXC_DCD_ITEM(18, IOMUXC_BASE_ADDR + 0x578, 0x00020030)
+MXC_DCD_ITEM(19, IOMUXC_BASE_ADDR + 0x588, 0x00020030)
+MXC_DCD_ITEM(20, IOMUXC_BASE_ADDR + 0x594, 0x00020030)
+
+MXC_DCD_ITEM(21, IOMUXC_BASE_ADDR + 0x57c, 0x00000030)
+MXC_DCD_ITEM(22, IOMUXC_BASE_ADDR + 0x58c, 0x00000000)
+
+MXC_DCD_ITEM(23, IOMUXC_BASE_ADDR + 0x59c, 0x00000030)
+MXC_DCD_ITEM(24, IOMUXC_BASE_ADDR + 0x5a0, 0x00000030)
+MXC_DCD_ITEM(25, IOMUXC_BASE_ADDR + 0x784, 0x00000030)
+MXC_DCD_ITEM(26, IOMUXC_BASE_ADDR + 0x788, 0x00000030)
+
+MXC_DCD_ITEM(27, IOMUXC_BASE_ADDR + 0x794, 0x00000030)
+MXC_DCD_ITEM(28, IOMUXC_BASE_ADDR + 0x79c, 0x00000030)
+MXC_DCD_ITEM(29, IOMUXC_BASE_ADDR + 0x7a0, 0x00000030)
+MXC_DCD_ITEM(30, IOMUXC_BASE_ADDR + 0x7a4, 0x00000030)
+
+MXC_DCD_ITEM(31, IOMUXC_BASE_ADDR + 0x7a8, 0x00000030)
+MXC_DCD_ITEM(32, IOMUXC_BASE_ADDR + 0x748, 0x00000030)
+MXC_DCD_ITEM(33, IOMUXC_BASE_ADDR + 0x74c, 0x00000030)
+MXC_DCD_ITEM(34, IOMUXC_BASE_ADDR + 0x750, 0x00020000)
+
+MXC_DCD_ITEM(35, IOMUXC_BASE_ADDR + 0x758, 0x00000000)
+MXC_DCD_ITEM(36, IOMUXC_BASE_ADDR + 0x774, 0x00020000)
+MXC_DCD_ITEM(37, IOMUXC_BASE_ADDR + 0x78c, 0x00000030)
+MXC_DCD_ITEM(38, IOMUXC_BASE_ADDR + 0x798, 0x000C0000)
+
+MXC_DCD_ITEM(39, MMDC_P0_BASE_ADDR + 0x81c, 0x33333333)
+MXC_DCD_ITEM(40, MMDC_P0_BASE_ADDR + 0x820, 0x33333333)
+MXC_DCD_ITEM(41, MMDC_P0_BASE_ADDR + 0x824, 0x33333333)
+MXC_DCD_ITEM(42, MMDC_P0_BASE_ADDR + 0x828, 0x33333333)
+
+MXC_DCD_ITEM(43, MMDC_P1_BASE_ADDR + 0x81c, 0x33333333)
+MXC_DCD_ITEM(44, MMDC_P1_BASE_ADDR + 0x820, 0x33333333)
+MXC_DCD_ITEM(45, MMDC_P1_BASE_ADDR + 0x824, 0x33333333)
+MXC_DCD_ITEM(46, MMDC_P1_BASE_ADDR + 0x828, 0x33333333)
+
+MXC_DCD_ITEM(47, MMDC_P0_BASE_ADDR + 0x018, 0x00081740)
+
+MXC_DCD_ITEM(48, MMDC_P0_BASE_ADDR + 0x01c, 0x00008000)
+MXC_DCD_ITEM(49, MMDC_P0_BASE_ADDR + 0x00c, 0x555A7975)
+MXC_DCD_ITEM(50, MMDC_P0_BASE_ADDR + 0x010, 0xFF538E64)
+MXC_DCD_ITEM(51, MMDC_P0_BASE_ADDR + 0x014, 0x01FF00DB)
+MXC_DCD_ITEM(52, MMDC_P0_BASE_ADDR + 0x02c, 0x000026D2)
+
+MXC_DCD_ITEM(53, MMDC_P0_BASE_ADDR + 0x030, 0x005B0E21)
+MXC_DCD_ITEM(54, MMDC_P0_BASE_ADDR + 0x008, 0x09444040)
+MXC_DCD_ITEM(55, MMDC_P0_BASE_ADDR + 0x004, 0x00025576)
+MXC_DCD_ITEM(56, MMDC_P0_BASE_ADDR + 0x040, 0x00000027)
+MXC_DCD_ITEM(57, MMDC_P0_BASE_ADDR + 0x000, 0x831A0000)
+
+MXC_DCD_ITEM(58, MMDC_P0_BASE_ADDR + 0x01c, 0x04088032)
+MXC_DCD_ITEM(59, MMDC_P0_BASE_ADDR + 0x01c, 0x0408803A)
+MXC_DCD_ITEM(60, MMDC_P0_BASE_ADDR + 0x01c, 0x00008033)
+MXC_DCD_ITEM(61, MMDC_P0_BASE_ADDR + 0x01c, 0x0000803B)
+MXC_DCD_ITEM(62, MMDC_P0_BASE_ADDR + 0x01c, 0x00428031)
+MXC_DCD_ITEM(63, MMDC_P0_BASE_ADDR + 0x01c, 0x00428039)
+MXC_DCD_ITEM(64, MMDC_P0_BASE_ADDR + 0x01c, 0x09408030)
+MXC_DCD_ITEM(65, MMDC_P0_BASE_ADDR + 0x01c, 0x09408038)
+
+MXC_DCD_ITEM(66, MMDC_P0_BASE_ADDR + 0x01c, 0x04008040)
+MXC_DCD_ITEM(67, MMDC_P0_BASE_ADDR + 0x01c, 0x04008048)
+MXC_DCD_ITEM(68, MMDC_P0_BASE_ADDR + 0x800, 0xA1380003)
+MXC_DCD_ITEM(69, MMDC_P1_BASE_ADDR + 0x800, 0xA1380003)
+MXC_DCD_ITEM(70, MMDC_P0_BASE_ADDR + 0x020, 0x00005800)
+MXC_DCD_ITEM(71, MMDC_P0_BASE_ADDR + 0x818, 0x00000007)
+MXC_DCD_ITEM(72, MMDC_P1_BASE_ADDR + 0x818, 0x00000007)
+
+MXC_DCD_ITEM(73, MMDC_P0_BASE_ADDR + 0x83c, 0x427D0303)
+MXC_DCD_ITEM(74, MMDC_P0_BASE_ADDR + 0x840, 0x02740267)
+MXC_DCD_ITEM(75, MMDC_P1_BASE_ADDR + 0x83c, 0x43010301)
+MXC_DCD_ITEM(76, MMDC_P1_BASE_ADDR + 0x840, 0x02770247)
+MXC_DCD_ITEM(77, MMDC_P0_BASE_ADDR + 0x848, 0x44343a36)
+MXC_DCD_ITEM(78, MMDC_P1_BASE_ADDR + 0x848, 0x3e3d363d)
+MXC_DCD_ITEM(79, MMDC_P0_BASE_ADDR + 0x850, 0x37434644)
+MXC_DCD_ITEM(80, MMDC_P1_BASE_ADDR + 0x850, 0x472a4640)
+# fine tune SDCLK duty cyc to low - seen to improve measured duty cycle of i.mx6
+MXC_DCD_ITEM(81, MMDC_P0_BASE_ADDR + 0x8c0, 0x24911492)
+MXC_DCD_ITEM(82, MMDC_P1_BASE_ADDR + 0x8c0, 0x24911492)
+
+MXC_DCD_ITEM(83, MMDC_P0_BASE_ADDR + 0x80c, 0x001F001F)
+MXC_DCD_ITEM(84, MMDC_P0_BASE_ADDR + 0x810, 0x001F001F)
+
+MXC_DCD_ITEM(85, MMDC_P1_BASE_ADDR + 0x80c, 0x001F001F)
+MXC_DCD_ITEM(86, MMDC_P1_BASE_ADDR + 0x810, 0x001F001F)
+
+MXC_DCD_ITEM(87, MMDC_P0_BASE_ADDR + 0x8b8, 0x00000800)
+MXC_DCD_ITEM(88, MMDC_P1_BASE_ADDR + 0x8b8, 0x00000800)
+
+MXC_DCD_ITEM(89, MMDC_P0_BASE_ADDR + 0x01c, 0x00000000)
+MXC_DCD_ITEM(90, MMDC_P0_BASE_ADDR + 0x404, 0x00011006)
+
+#endif
+
+#endif
diff --git a/board/freescale/mx6q_hdmidongle/lowlevel_init.S b/board/freescale/mx6q_hdmidongle/lowlevel_init.S
new file mode 100644
index 0000000..a299709
--- /dev/null
+++ b/board/freescale/mx6q_hdmidongle/lowlevel_init.S
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/mx6.h>
+
+/*
+ Disable L2Cache because ROM turn it on when uboot use plug-in.
+ If L2Cache is on default, there are cache coherence problem if kernel have
+ not config L2Cache.
+*/
+.macro init_l2cc
+    ldr     r1, =0xa02000
+    ldr     r0, =0x0
+    str     r0, [r1, #0x100]
+.endm /* init_l2cc */
+
+/* invalidate the D-CACHE */
+.macro inv_dcache
+    mov     r0,#0
+    mcr     p15,2,r0,c0,c0,0  /* cache size selection register, select dcache */
+    mrc     p15,1,r0,c0,c0,0  /* cache size ID register */
+    mov     r0,r0,ASR #13
+    ldr     r3,=0xfff
+    and     r0,r0,r3
+    cmp     r0,#0x7f
+    moveq   r6,#0x1000
+    beq     size_done
+    cmp     r0,#0xff
+    moveq   r6,#0x2000
+    movne   r6,#0x4000
+
+size_done:
+    mov     r2,#0
+    mov     r3,#0x40000000
+    mov     r4,#0x80000000
+    mov     r5,#0xc0000000
+
+d_inv_loop:
+    mcr     p15,0,r2,c7,c6,2  /* invalidate dcache by set / way */
+    mcr     p15,0,r3,c7,c6,2  /* invalidate dcache by set / way */
+    mcr     p15,0,r4,c7,c6,2  /* invalidate dcache by set / way */
+    mcr     p15,0,r5,c7,c6,2  /* invalidate dcache by set / way */
+    add     r2,r2,#0x20
+    add     r3,r3,#0x20
+    add     r4,r4,#0x20
+    add     r5,r5,#0x20
+
+    cmp     r2,r6
+    bne     d_inv_loop
+.endm
+
+/* AIPS setup - Only setup MPROTx registers.
+ * The PACR default values are good.*/
+.macro init_aips
+	/*
+	 * Set all MPROTx to be non-bufferable, trusted for R/W,
+	 * not forced to user-mode.
+	 */
+	ldr r0, =AIPS1_ON_BASE_ADDR
+	ldr r1, =0x77777777
+	str r1, [r0, #0x0]
+	str r1, [r0, #0x4]
+	ldr r1, =0x0
+	str r1, [r0, #0x40]
+	str r1, [r0, #0x44]
+	str r1, [r0, #0x48]
+	str r1, [r0, #0x4C]
+	str r1, [r0, #0x50]
+
+	ldr r0, =AIPS2_ON_BASE_ADDR
+	ldr r1, =0x77777777
+	str r1, [r0, #0x0]
+	str r1, [r0, #0x4]
+	ldr r1, =0x0
+	str r1, [r0, #0x40]
+	str r1, [r0, #0x44]
+	str r1, [r0, #0x48]
+	str r1, [r0, #0x4C]
+	str r1, [r0, #0x50]
+.endm /* init_aips */
+
+.macro setup_pll pll, freq
+.endm
+
+.macro init_clock
+
+/* PLL1, PLL2, and PLL3 are enabled by ROM */
+#ifdef CONFIG_PLL3
+	/* enable PLL3 for UART */
+	ldr r0, ANATOP_BASE_ADDR_W
+
+	/* power up PLL */
+	ldr r1, [r0, #ANATOP_USB1]
+	orr r1, r1, #0x1000
+	str r1, [r0, #ANATOP_USB1]
+
+	/* enable PLL */
+	ldr r1, [r0, #ANATOP_USB1]
+	orr r1, r1, #0x2000
+	str r1, [r0, #ANATOP_USB1]
+
+	/* wait PLL lock */
+100:
+	ldr r1, [r0, #ANATOP_USB1]
+	mov r1, r1, lsr #31
+	cmp r1, #0x1
+	bne 100b
+
+	/* clear bypass bit */
+	ldr r1, [r0, #ANATOP_USB1]
+	and r1, r1, #0xfffeffff
+	str r1, [r0, #ANATOP_USB1]
+#endif
+
+	/* Restore the default values in the Gate registers */
+	ldr r0, CCM_BASE_ADDR_W
+	ldr r1, =0xC0003F
+	str r1, [r0, #CLKCTL_CCGR0]
+	ldr r1, =0x30FC00
+	str r1, [r0, #CLKCTL_CCGR1]
+	ldr r1, =0xFFFC000
+	str r1, [r0, #CLKCTL_CCGR2]
+	ldr r1, =0x3FF00000
+	str r1, [r0, #CLKCTL_CCGR3]
+	ldr r1, =0xFFF300
+	str r1, [r0, #CLKCTL_CCGR4]
+	ldr r1, =0xF0000C3
+	str r1, [r0, #CLKCTL_CCGR5]
+	ldr r1, =0x3FC
+	str r1, [r0, #CLKCTL_CCGR6]
+.endm
+
+.section ".text.init", "x"
+
+.globl lowlevel_init
+lowlevel_init:
+
+	inv_dcache
+
+	init_l2cc
+
+	init_aips
+
+	init_clock
+
+	mov pc, lr
+
+/* Board level setting value */
+ANATOP_BASE_ADDR_W:		.word ANATOP_BASE_ADDR
+CCM_BASE_ADDR_W:		.word CCM_BASE_ADDR
diff --git a/board/freescale/mx6q_hdmidongle/mx6q_hdmidongle.c b/board/freescale/mx6q_hdmidongle/mx6q_hdmidongle.c
new file mode 100644
index 0000000..6cfe334
--- /dev/null
+++ b/board/freescale/mx6q_hdmidongle/mx6q_hdmidongle.c
@@ -0,0 +1,1452 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mx6.h>
+#include <asm/arch/mx6_pins.h>
+#include <asm/arch/mx6dl_pins.h>
+#include <asm/arch/iomux-v3.h>
+#include <asm/arch/regs-anadig.h>
+#include <asm/errno.h>
+#ifdef CONFIG_MXC_FEC
+#include <miiphy.h>
+#endif
+#if defined(CONFIG_VIDEO_MX5)
+#include <linux/list.h>
+#include <linux/fb.h>
+#include <linux/mxcfb.h>
+#include <ipu.h>
+#include <lcd.h>
+#endif
+
+#ifdef CONFIG_IMX_ECSPI
+#include <imx_spi.h>
+#endif
+
+#if CONFIG_I2C_MXC
+#include <i2c.h>
+#endif
+
+#ifdef CONFIG_CMD_MMC
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#endif
+
+#ifdef CONFIG_ARCH_MMU
+#include <asm/mmu.h>
+#include <asm/arch/mmu.h>
+#endif
+
+#ifdef CONFIG_CMD_CLOCK
+#include <asm/clock.h>
+#endif
+
+#ifdef CONFIG_CMD_IMXOTP
+#include <imx_otp.h>
+#endif
+
+#ifdef CONFIG_MXC_GPIO
+#include <asm/gpio.h>
+#include <asm/arch/gpio.h>
+#endif
+
+#ifdef CONFIG_ANDROID_RECOVERY
+#include <recovery.h>
+#endif
+DECLARE_GLOBAL_DATA_PTR;
+
+static enum boot_device boot_dev;
+
+#define GPIO_REVB_POWER_KEY IMX_GPIO_NR(1, 27)
+#define USB_OTG_PWR IMX_GPIO_NR(4, 15)
+#define USB_H1_POWER IMX_GPIO_NR(4, 14)
+
+#define HDMIDONGLE_CHG_SYS_ON	IMX_GPIO_NR(2, 6)
+
+#ifdef CONFIG_VIDEO_MX5
+extern unsigned char fsl_bmp_600x400[];
+extern int fsl_bmp_600x400_size;
+extern int g_ipu_hw_rev;
+
+#if defined(CONFIG_BMP_8BPP)
+unsigned short colormap[256];
+#elif defined(CONFIG_BMP_16BPP)
+unsigned short colormap[65536];
+#else
+unsigned short colormap[16777216];
+#endif
+
+static int di = 1;
+
+extern int ipuv3_fb_init(struct fb_videomode *mode, int di,
+			int interface_pix_fmt,
+			ipu_di_clk_parent_t di_clk_parent,
+			int di_clk_val);
+
+static struct fb_videomode lvds_xga = {
+	 "XGA", 60, 1024, 768, 15385, 220, 40, 21, 7, 60, 10,
+	 FB_SYNC_EXT,
+	 FB_VMODE_NONINTERLACED,
+	 0,
+};
+
+vidinfo_t panel_info;
+#endif
+
+static inline void setup_boot_device(void)
+{
+	uint soc_sbmr = readl(SRC_BASE_ADDR + 0x4);
+	uint bt_mem_ctl = (soc_sbmr & 0x000000FF) >> 4 ;
+	uint bt_mem_type = (soc_sbmr & 0x00000008) >> 3;
+
+	switch (bt_mem_ctl) {
+	case 0x0:
+		if (bt_mem_type)
+			boot_dev = ONE_NAND_BOOT;
+		else
+			boot_dev = WEIM_NOR_BOOT;
+		break;
+	case 0x2:
+			boot_dev = SATA_BOOT;
+		break;
+	case 0x3:
+		if (bt_mem_type)
+			boot_dev = I2C_BOOT;
+		else
+			boot_dev = SPI_NOR_BOOT;
+		break;
+	case 0x4:
+	case 0x5:
+		boot_dev = SD_BOOT;
+		break;
+	case 0x6:
+	case 0x7:
+		boot_dev = MMC_BOOT;
+		break;
+	case 0x8 ... 0xf:
+		boot_dev = NAND_BOOT;
+		break;
+	default:
+		boot_dev = UNKNOWN_BOOT;
+		break;
+	}
+}
+
+enum boot_device get_boot_device(void)
+{
+	return boot_dev;
+}
+
+u32 get_board_rev(void)
+{
+	return fsl_system_rev;
+}
+
+#ifdef CONFIG_ARCH_MMU
+void board_mmu_init(void)
+{
+	unsigned long ttb_base = PHYS_SDRAM_1 + 0x4000;
+	unsigned long i;
+
+	/*
+	* Set the TTB register
+	*/
+	asm volatile ("mcr  p15,0,%0,c2,c0,0" : : "r"(ttb_base) /*:*/);
+
+	/*
+	* Set the Domain Access Control Register
+	*/
+	i = ARM_ACCESS_DACR_DEFAULT;
+	asm volatile ("mcr  p15,0,%0,c3,c0,0" : : "r"(i) /*:*/);
+
+	/*
+	* First clear all TT entries - ie Set them to Faulting
+	*/
+	memset((void *)ttb_base, 0, ARM_FIRST_LEVEL_PAGE_TABLE_SIZE);
+	/* Actual   Virtual  Size   Attributes          Function */
+	/* Base     Base     MB     cached? buffered?  access permissions */
+	/* xxx00000 xxx00000 */
+	X_ARM_MMU_SECTION(0x000, 0x000, 0x001,
+			ARM_UNCACHEABLE, ARM_UNBUFFERABLE,
+			ARM_ACCESS_PERM_RW_RW); /* ROM, 1M */
+	X_ARM_MMU_SECTION(0x001, 0x001, 0x008,
+			ARM_UNCACHEABLE, ARM_UNBUFFERABLE,
+			ARM_ACCESS_PERM_RW_RW); /* 8M */
+	X_ARM_MMU_SECTION(0x009, 0x009, 0x001,
+			ARM_UNCACHEABLE, ARM_UNBUFFERABLE,
+			ARM_ACCESS_PERM_RW_RW); /* IRAM */
+	X_ARM_MMU_SECTION(0x00A, 0x00A, 0x0F6,
+			ARM_UNCACHEABLE, ARM_UNBUFFERABLE,
+			ARM_ACCESS_PERM_RW_RW); /* 246M */
+
+	/* 2 GB memory starting at 0x10000000, only map 1.875 GB */
+	X_ARM_MMU_SECTION(0x100, 0x100, 0x780,
+			ARM_CACHEABLE, ARM_BUFFERABLE,
+			ARM_ACCESS_PERM_RW_RW);
+	/* uncached alias of the same 1.875 GB memory */
+	X_ARM_MMU_SECTION(0x100, 0x880, 0x780,
+			ARM_UNCACHEABLE, ARM_UNBUFFERABLE,
+			ARM_ACCESS_PERM_RW_RW);
+
+	/* Enable MMU */
+	MMU_ON();
+}
+#endif
+
+#ifdef CONFIG_DWC_AHSATA
+
+#define ANATOP_PLL_LOCK                 0x80000000
+#define ANATOP_PLL_ENABLE_MASK          0x00002000
+#define ANATOP_PLL_BYPASS_MASK          0x00010000
+#define ANATOP_PLL_LOCK                 0x80000000
+#define ANATOP_PLL_PWDN_MASK            0x00001000
+#define ANATOP_PLL_HOLD_RING_OFF_MASK   0x00000800
+#define ANATOP_SATA_CLK_ENABLE_MASK     0x00100000
+
+int setup_sata(void)
+{
+	u32 reg = 0;
+	s32 timeout = 100000;
+
+	/* Enable sata clock */
+	reg = readl(CCM_BASE_ADDR + 0x7c); /* CCGR5 */
+	reg |= 0x30;
+	writel(reg, CCM_BASE_ADDR + 0x7c);
+
+	/* Enable PLLs */
+	reg = readl(ANATOP_BASE_ADDR + 0xe0); /* ENET PLL */
+	reg &= ~ANATOP_PLL_PWDN_MASK;
+	writel(reg, ANATOP_BASE_ADDR + 0xe0);
+	reg |= ANATOP_PLL_ENABLE_MASK;
+	while (timeout--) {
+		if (readl(ANATOP_BASE_ADDR + 0xe0) & ANATOP_PLL_LOCK)
+			break;
+	}
+	if (timeout <= 0)
+		return -1;
+	reg &= ~ANATOP_PLL_BYPASS_MASK;
+	writel(reg, ANATOP_BASE_ADDR + 0xe0);
+	reg |= ANATOP_SATA_CLK_ENABLE_MASK;
+	writel(reg, ANATOP_BASE_ADDR + 0xe0);
+
+	/* Enable sata phy */
+	reg = readl(IOMUXC_BASE_ADDR + 0x34); /* GPR13 */
+
+	reg &= ~0x07ffffff;
+	/*
+	 * rx_eq_val_0 = 5 [26:24]
+	 * los_lvl = 0x12 [23:19]
+	 * rx_dpll_mode_0 = 0x3 [18:16]
+	 * mpll_ss_en = 0x0 [14]
+	 * tx_atten_0 = 0x4 [13:11]
+	 * tx_boost_0 = 0x0 [10:7]
+	 * tx_lvl = 0x11 [6:2]
+	 * mpll_ck_off_b = 0x1 [1]
+	 * tx_edgerate_0 = 0x0 [0]
+	 * */
+	reg |= 0x59124c6;
+	writel(reg, IOMUXC_BASE_ADDR + 0x34);
+
+	return 0;
+}
+#endif
+
+int dram_init(void)
+{
+	/*
+	 * Switch PL301_FAST2 to DDR Dual-channel mapping
+	 * however this block the boot up, temperory redraw
+	 */
+	/*
+	 * u32 reg = 1;
+	 * writel(reg, GPV0_BASE_ADDR);
+	 */
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+static void setup_uart(void)
+{
+#if defined CONFIG_MX6Q
+	/* UART4 TXD */
+	mxc_iomux_v3_setup_pad(MX6Q_PAD_KEY_COL0__UART4_TXD);
+
+	/* UART4 RXD */
+	mxc_iomux_v3_setup_pad(MX6Q_PAD_KEY_ROW0__UART4_RXD);
+#elif defined CONFIG_MX6DL
+	/* UART4 TXD */
+	mxc_iomux_v3_setup_pad(MX6DL_PAD_KEY_COL0__UART4_TXD);
+
+	/* UART4 RXD */
+	mxc_iomux_v3_setup_pad(MX6DL_PAD_KEY_ROW0__UART4_RXD);
+#endif
+}
+
+#ifdef CONFIG_VIDEO_MX5
+void setup_lvds_poweron(void)
+{
+	int reg;
+	/* AUX_5V_EN: GPIO(6, 10) */
+#ifdef CONFIG_MX6DL
+	mxc_iomux_v3_setup_pad(MX6DL_PAD_NANDF_RB0__GPIO_6_10);
+#else
+	mxc_iomux_v3_setup_pad(MX6Q_PAD_NANDF_RB0__GPIO_6_10);
+#endif
+
+	reg = readl(GPIO6_BASE_ADDR + GPIO_GDIR);
+	reg |= (1 << 10);
+	writel(reg, GPIO6_BASE_ADDR + GPIO_GDIR);
+
+	reg = readl(GPIO6_BASE_ADDR + GPIO_DR);
+	reg |= (1 << 10);
+	writel(reg, GPIO6_BASE_ADDR + GPIO_DR);
+}
+#endif
+
+#ifdef CONFIG_I2C_MXC
+#define I2C1_SDA_GPIO5_26_BIT_MASK  (1 << 26)
+#define I2C1_SCL_GPIO5_27_BIT_MASK  (1 << 27)
+#define I2C2_SCL_GPIO4_12_BIT_MASK  (1 << 12)
+#define I2C2_SDA_GPIO4_13_BIT_MASK  (1 << 13)
+#define I2C3_SCL_GPIO1_3_BIT_MASK   (1 << 3)
+#define I2C3_SDA_GPIO1_6_BIT_MASK   (1 << 6)
+
+static void setup_i2c(unsigned int module_base)
+{
+	unsigned int reg;
+
+	switch (module_base) {
+	case I2C1_BASE_ADDR:
+#if defined CONFIG_MX6Q
+		/* i2c1 SDA */
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_CSI0_DAT8__I2C1_SDA);
+
+		/* i2c1 SCL */
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_CSI0_DAT9__I2C1_SCL);
+#elif defined CONFIG_MX6DL
+		/* i2c1 SDA */
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_CSI0_DAT8__I2C1_SDA);
+		/* i2c1 SCL */
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_CSI0_DAT9__I2C1_SCL);
+#endif
+
+		/* Enable i2c clock */
+		reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR2);
+		reg |= 0xC0;
+		writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR2);
+
+		break;
+	case I2C2_BASE_ADDR:
+#if defined CONFIG_MX6Q
+		/* i2c2 SDA */
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_KEY_ROW3__I2C2_SDA);
+
+		/* i2c2 SCL */
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_KEY_COL3__I2C2_SCL);
+#elif defined CONFIG_MX6DL
+		/* i2c2 SDA */
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_KEY_ROW3__I2C2_SDA);
+
+		/* i2c2 SCL */
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_KEY_COL3__I2C2_SCL);
+#endif
+
+		/* Enable i2c clock */
+		reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR2);
+		reg |= 0x300;
+		writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR2);
+
+		break;
+	case I2C3_BASE_ADDR:
+#if defined CONFIG_MX6Q
+		/* GPIO_3 for I2C3_SCL */
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_GPIO_3__I2C3_SCL);
+		/* GPIO_6 for I2C3_SDA */
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_GPIO_6__I2C3_SDA);
+
+#elif defined CONFIG_MX6DL
+		/* GPIO_3 for I2C3_SCL */
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_GPIO_3__I2C3_SCL);
+		/* GPIO_6 for I2C3_SDA */
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_GPIO_6__I2C3_SDA);
+#endif
+		/* Enable i2c clock */
+		reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR2);
+		reg |= 0xC00;
+		writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR2);
+
+		break;
+	default:
+		printf("Invalid I2C base: 0x%x\n", module_base);
+		break;
+	}
+}
+/* Note: udelay() is not accurate for i2c timing */
+static void __udelay(int time)
+{
+	int i, j;
+
+	for (i = 0; i < time; i++) {
+		for (j = 0; j < 200; j++) {
+			asm("nop");
+			asm("nop");
+		}
+	}
+}
+static void mx6q_i2c_gpio_scl_direction(int bus, int output)
+{
+	u32 reg;
+
+	switch (bus) {
+	case 1:
+#if defined CONFIG_MX6Q
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_CSI0_DAT9__GPIO_5_27);
+#elif defined CONFIG_MX6DL
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_CSI0_DAT9__GPIO_5_27);
+#endif
+		reg = readl(GPIO5_BASE_ADDR + GPIO_GDIR);
+		if (output)
+			reg |= I2C1_SCL_GPIO5_27_BIT_MASK;
+		else
+			reg &= ~I2C1_SCL_GPIO5_27_BIT_MASK;
+		writel(reg, GPIO5_BASE_ADDR + GPIO_GDIR);
+		break;
+	case 2:
+#if defined CONFIG_MX6Q
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_KEY_COL3__GPIO_4_12);
+#elif defined CONFIG_MX6DL
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_KEY_COL3__GPIO_4_12);
+#endif
+		reg = readl(GPIO4_BASE_ADDR + GPIO_GDIR);
+		if (output)
+			reg |= I2C2_SCL_GPIO4_12_BIT_MASK;
+		else
+			reg &= ~I2C2_SCL_GPIO4_12_BIT_MASK;
+		writel(reg, GPIO4_BASE_ADDR + GPIO_GDIR);
+		break;
+	case 3:
+#if defined CONFIG_MX6Q
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_GPIO_3__GPIO_1_3);
+#elif defined CONFIG_MX6DL
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_GPIO_3__GPIO_1_3);
+#endif
+		reg = readl(GPIO1_BASE_ADDR + GPIO_GDIR);
+		if (output)
+			reg |= I2C3_SCL_GPIO1_3_BIT_MASK;
+		else
+			reg &= I2C3_SCL_GPIO1_3_BIT_MASK;
+		writel(reg, GPIO1_BASE_ADDR + GPIO_GDIR);
+		break;
+	}
+}
+
+/* set 1 to output, sent 0 to input */
+static void mx6q_i2c_gpio_sda_direction(int bus, int output)
+{
+	u32 reg;
+
+	switch (bus) {
+	case 1:
+#if defined CONFIG_MX6Q
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_CSI0_DAT8__GPIO_5_26);
+#elif defined CONFIG_MX6DL
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_CSI0_DAT8__GPIO_5_26);
+#endif
+		reg = readl(GPIO5_BASE_ADDR + GPIO_GDIR);
+		if (output)
+			reg |= I2C1_SDA_GPIO5_26_BIT_MASK;
+		else
+			reg &= ~I2C1_SDA_GPIO5_26_BIT_MASK;
+		writel(reg, GPIO5_BASE_ADDR + GPIO_GDIR);
+		break;
+	case 2:
+#if defined CONFIG_MX6Q
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_KEY_ROW3__GPIO_4_13);
+#elif defined CONFIG_MX6DL
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_KEY_ROW3__GPIO_4_13);
+#endif
+		reg = readl(GPIO4_BASE_ADDR + GPIO_GDIR);
+		if (output)
+			reg |= I2C2_SDA_GPIO4_13_BIT_MASK;
+		else
+			reg &= ~I2C2_SDA_GPIO4_13_BIT_MASK;
+		writel(reg, GPIO4_BASE_ADDR + GPIO_GDIR);
+	case 3:
+#if defined CONFIG_MX6Q
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_GPIO_6__GPIO_1_6);
+#elif defined CONFIG_MX6DL
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_GPIO_6__GPIO_1_6);
+#endif
+		reg = readl(GPIO1_BASE_ADDR + GPIO_GDIR);
+		if (output)
+			reg |= I2C3_SDA_GPIO1_6_BIT_MASK;
+		else
+			reg &= ~I2C3_SDA_GPIO1_6_BIT_MASK;
+		writel(reg, GPIO1_BASE_ADDR + GPIO_GDIR);
+	default:
+		break;
+	}
+}
+
+/* set 1 to high 0 to low */
+static void mx6q_i2c_gpio_scl_set_level(int bus, int high)
+{
+	u32 reg;
+
+	switch (bus) {
+	case 1:
+		reg = readl(GPIO5_BASE_ADDR + GPIO_DR);
+		if (high)
+			reg |= I2C1_SCL_GPIO5_27_BIT_MASK;
+		else
+			reg &= ~I2C1_SCL_GPIO5_27_BIT_MASK;
+		writel(reg, GPIO5_BASE_ADDR + GPIO_DR);
+		break;
+	case 2:
+		reg = readl(GPIO4_BASE_ADDR + GPIO_DR);
+		if (high)
+			reg |= I2C2_SCL_GPIO4_12_BIT_MASK;
+		else
+			reg &= ~I2C2_SCL_GPIO4_12_BIT_MASK;
+		writel(reg, GPIO4_BASE_ADDR + GPIO_DR);
+		break;
+	case 3:
+		reg = readl(GPIO1_BASE_ADDR + GPIO_DR);
+		if (high)
+			reg |= I2C3_SCL_GPIO1_3_BIT_MASK;
+		else
+			reg &= ~I2C3_SCL_GPIO1_3_BIT_MASK;
+		writel(reg, GPIO1_BASE_ADDR + GPIO_DR);
+		break;
+	}
+}
+
+/* set 1 to high 0 to low */
+static void mx6q_i2c_gpio_sda_set_level(int bus, int high)
+{
+	u32 reg;
+
+	switch (bus) {
+	case 1:
+		reg = readl(GPIO5_BASE_ADDR + GPIO_DR);
+		if (high)
+			reg |= I2C1_SDA_GPIO5_26_BIT_MASK;
+		else
+			reg &= ~I2C1_SDA_GPIO5_26_BIT_MASK;
+		writel(reg, GPIO5_BASE_ADDR + GPIO_DR);
+		break;
+	case 2:
+		reg = readl(GPIO4_BASE_ADDR + GPIO_DR);
+		if (high)
+			reg |= I2C2_SDA_GPIO4_13_BIT_MASK;
+		else
+			reg &= ~I2C2_SDA_GPIO4_13_BIT_MASK;
+		writel(reg, GPIO4_BASE_ADDR + GPIO_DR);
+		break;
+	case 3:
+		reg = readl(GPIO1_BASE_ADDR + GPIO_DR);
+		if (high)
+			reg |= I2C3_SDA_GPIO1_6_BIT_MASK;
+		else
+			reg &= ~I2C3_SDA_GPIO1_6_BIT_MASK;
+		writel(reg, GPIO1_BASE_ADDR + GPIO_DR);
+		break;
+	}
+}
+
+static int mx6q_i2c_gpio_check_sda(int bus)
+{
+	u32 reg;
+	int result = 0;
+
+	switch (bus) {
+	case 1:
+		reg = readl(GPIO5_BASE_ADDR + GPIO_PSR);
+		result = !!(reg & I2C1_SDA_GPIO5_26_BIT_MASK);
+		break;
+	case 2:
+		reg = readl(GPIO4_BASE_ADDR + GPIO_PSR);
+		result = !!(reg & I2C2_SDA_GPIO4_13_BIT_MASK);
+		break;
+	case 3:
+		reg = readl(GPIO1_BASE_ADDR + GPIO_PSR);
+		result = !!(reg & I2C3_SDA_GPIO1_6_BIT_MASK);
+		break;
+	}
+
+	return result;
+}
+
+ /* Random reboot cause i2c SDA low issue:
+  * the i2c bus busy because some device pull down the I2C SDA
+  * line. This happens when Host is reading some byte from slave, and
+  * then host is reset/reboot. Since in this case, device is
+  * controlling i2c SDA line, the only thing host can do this give the
+  * clock on SCL and sending NAK, and STOP to finish this
+  * transaction.
+  *
+  * How to fix this issue:
+  * detect if the SDA was low on bus send 8 dummy clock, and 1
+  * clock + NAK, and STOP to finish i2c transaction the pending
+  * transfer.
+  */
+int i2c_bus_recovery(void)
+{
+	int i, bus, result = 0;
+
+	for (bus = 1; bus <= 3; bus++) {
+		mx6q_i2c_gpio_sda_direction(bus, 0);
+
+		if (mx6q_i2c_gpio_check_sda(bus) == 0) {
+			printf("i2c: I2C%d SDA is low, start i2c recovery...\n", bus);
+			mx6q_i2c_gpio_scl_direction(bus, 1);
+			mx6q_i2c_gpio_scl_set_level(bus, 1);
+			__udelay(10000);
+
+			for (i = 0; i < 9; i++) {
+				mx6q_i2c_gpio_scl_set_level(bus, 1);
+				__udelay(5);
+				mx6q_i2c_gpio_scl_set_level(bus, 0);
+				__udelay(5);
+			}
+
+			/* 9th clock here, the slave should already
+			   release the SDA, we can set SDA as high to
+			   a NAK.*/
+			mx6q_i2c_gpio_sda_direction(bus, 1);
+			mx6q_i2c_gpio_sda_set_level(bus, 1);
+			__udelay(1); /* Pull up SDA first */
+			mx6q_i2c_gpio_scl_set_level(bus, 1);
+			__udelay(5); /* plus pervious 1 us */
+			mx6q_i2c_gpio_scl_set_level(bus, 0);
+			__udelay(5);
+			mx6q_i2c_gpio_sda_set_level(bus, 0);
+			__udelay(5);
+			mx6q_i2c_gpio_scl_set_level(bus, 1);
+			__udelay(5);
+			/* Here: SCL is high, and SDA from low to high, it's a
+			 * stop condition */
+			mx6q_i2c_gpio_sda_set_level(bus, 1);
+			__udelay(5);
+
+			mx6q_i2c_gpio_sda_direction(bus, 0);
+			if (mx6q_i2c_gpio_check_sda(bus) == 1)
+				printf("I2C%d Recovery success\n", bus);
+			else {
+				printf("I2C%d Recovery failed, I2C1 SDA still low!!!\n", bus);
+				result |= 1 << bus;
+			}
+		}
+
+		/* configure back to i2c */
+		switch (bus) {
+		case 1:
+			setup_i2c(I2C1_BASE_ADDR);
+			break;
+		case 2:
+			setup_i2c(I2C2_BASE_ADDR);
+			break;
+		case 3:
+			setup_i2c(I2C3_BASE_ADDR);
+			break;
+		}
+	}
+
+	return result;
+}
+
+
+void setup_pmic_voltages(void)
+{
+	unsigned char value = 0 ;
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	if (!i2c_probe(0x8)) {
+		if (i2c_read(0x8, 0, 1, &value, 1))
+			printf("%s:i2c_read:error\n", __func__);
+		printf("Found PFUZE100! device id=%x\n", value);
+		#if CONFIG_MX6_INTER_LDO_BYPASS
+		/*VDDCORE 1.1V@800Mhz: SW1AB*/
+		value = 0x20;
+		i2c_write(0x8, 0x20, 1, &value, 1);
+
+		/*VDDSOC 1.2V : SW1C*/
+		value = 0x24;
+		i2c_write(0x8, 0x2e, 1, &value, 1);
+
+		/* Bypass the VDDSOC from Anatop */
+		val = REG_RD(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE);
+		val &= ~BM_ANADIG_REG_CORE_REG2_TRG;
+		val |= BF_ANADIG_REG_CORE_REG2_TRG(0x1f);
+		REG_WR(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE, val);
+
+		/* Bypass the VDDCORE from Anatop */
+		val = REG_RD(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE);
+		val &= ~BM_ANADIG_REG_CORE_REG0_TRG;
+		val |= BF_ANADIG_REG_CORE_REG0_TRG(0x1f);
+		REG_WR(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE, val);
+
+		/* Bypass the VDDPU from Anatop */
+		val = REG_RD(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE);
+		val &= ~BM_ANADIG_REG_CORE_REG1_TRG;
+		val |= BF_ANADIG_REG_CORE_REG1_TRG(0x1f);
+		REG_WR(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE, val);
+
+		/*clear PowerDown Enable bit of WDOG1_WMCR*/
+		writew(0, WDOG1_BASE_ADDR + 0x08);
+		printf("hw_anadig_reg_core=%x\n",
+			REG_RD(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE));
+		#endif
+
+	}
+}
+#endif
+
+#ifdef CONFIG_IMX_ECSPI
+s32 spi_get_cfg(struct imx_spi_dev_t *dev)
+{
+	switch (dev->slave.cs) {
+	case 0:
+		/* SPI-NOR */
+		dev->base = ECSPI2_BASE_ADDR;
+		dev->freq = 25000000;
+		dev->ss_pol = IMX_SPI_ACTIVE_LOW;
+		dev->ss = 0;
+		dev->fifo_sz = 64 * 4;
+		dev->us_delay = 0;
+		break;
+	case 1:
+		/* SPI-NOR */
+		dev->base = ECSPI2_BASE_ADDR;
+		dev->freq = 25000000;
+		dev->ss_pol = IMX_SPI_ACTIVE_LOW;
+		dev->ss = 1;
+		dev->fifo_sz = 64 * 4;
+		dev->us_delay = 0;
+		break;
+	default:
+		printf("Invalid Bus ID!\n");
+	}
+
+	return 0;
+}
+
+void spi_io_init(struct imx_spi_dev_t *dev)
+{
+	u32 reg;
+
+	switch (dev->base) {
+	case ECSPI2_BASE_ADDR:
+		/* Enable clock */
+		reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR1);
+		reg |= 0xC;
+		writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR1);
+
+#if defined CONFIG_MX6Q
+		/* SCLK */
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_EIM_CS0__ECSPI2_SCLK);
+
+		/* MISO */
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_EIM_OE__ECSPI2_MISO);
+
+		/* MOSI */
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_EIM_CS1__ECSPI2_MOSI);
+
+		mxc_iomux_v3_setup_pad(MX6Q_PAD_EIM_RW__ECSPI2_SS0);
+#elif defined CONFIG_MX6DL
+		/* SCLK */
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_EIM_OE__ECSPI2_MISO);
+
+		/* MISO */
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_EIM_OE__ECSPI2_MISO);
+
+		/* MOSI */
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_EIM_CS1__ECSPI2_MOSI);
+
+		mxc_iomux_v3_setup_pad(MX6DL_PAD_EIM_RW__ECSPI2_SS0);
+#endif
+		break;
+	case ECSPI1_BASE_ADDR:
+	case ECSPI3_BASE_ADDR:
+		/* ecspi1,3 fall through */
+		break;
+	default:
+		break;
+	}
+}
+#endif
+#ifdef CONFIG_NAND_GPMI
+#if defined CONFIG_MX6Q
+iomux_v3_cfg_t nfc_pads[] = {
+	MX6Q_PAD_NANDF_CLE__RAWNAND_CLE,
+	MX6Q_PAD_NANDF_ALE__RAWNAND_ALE,
+	MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN,
+	MX6Q_PAD_NANDF_RB0__RAWNAND_READY0,
+	MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N,
+	MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N,
+	MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N,
+	MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N,
+	MX6Q_PAD_SD4_CMD__RAWNAND_RDN,
+	MX6Q_PAD_SD4_CLK__RAWNAND_WRN,
+	MX6Q_PAD_NANDF_D0__RAWNAND_D0,
+	MX6Q_PAD_NANDF_D1__RAWNAND_D1,
+	MX6Q_PAD_NANDF_D2__RAWNAND_D2,
+	MX6Q_PAD_NANDF_D3__RAWNAND_D3,
+	MX6Q_PAD_NANDF_D4__RAWNAND_D4,
+	MX6Q_PAD_NANDF_D5__RAWNAND_D5,
+	MX6Q_PAD_NANDF_D6__RAWNAND_D6,
+	MX6Q_PAD_NANDF_D7__RAWNAND_D7,
+	MX6Q_PAD_SD4_DAT0__RAWNAND_DQS,
+};
+#elif defined CONFIG_MX6DL
+iomux_v3_cfg_t nfc_pads[] = {
+	MX6DL_PAD_NANDF_CLE__RAWNAND_CLE,
+	MX6DL_PAD_NANDF_ALE__RAWNAND_ALE,
+	MX6DL_PAD_NANDF_WP_B__RAWNAND_RESETN,
+	MX6DL_PAD_NANDF_RB0__RAWNAND_READY0,
+	MX6DL_PAD_NANDF_CS0__RAWNAND_CE0N,
+	MX6DL_PAD_NANDF_CS1__RAWNAND_CE1N,
+	MX6DL_PAD_NANDF_CS2__RAWNAND_CE2N,
+	MX6DL_PAD_NANDF_CS3__RAWNAND_CE3N,
+	MX6DL_PAD_SD4_CMD__RAWNAND_RDN,
+	MX6DL_PAD_SD4_CLK__RAWNAND_WRN,
+	MX6DL_PAD_NANDF_D0__RAWNAND_D0,
+	MX6DL_PAD_NANDF_D1__RAWNAND_D1,
+	MX6DL_PAD_NANDF_D2__RAWNAND_D2,
+	MX6DL_PAD_NANDF_D3__RAWNAND_D3,
+	MX6DL_PAD_NANDF_D4__RAWNAND_D4,
+	MX6DL_PAD_NANDF_D5__RAWNAND_D5,
+	MX6DL_PAD_NANDF_D6__RAWNAND_D6,
+	MX6DL_PAD_NANDF_D7__RAWNAND_D7,
+	MX6DL_PAD_SD4_DAT0__RAWNAND_DQS,
+};
+#endif
+
+int setup_gpmi_nand(void)
+{
+	unsigned int reg;
+
+	/* config gpmi nand iomux */
+	mxc_iomux_v3_setup_multiple_pads(nfc_pads,
+			ARRAY_SIZE(nfc_pads));
+
+
+	/* config gpmi and bch clock to 11Mhz*/
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CS2CDR);
+	reg &= 0xF800FFFF;
+	reg |= 0x01E40000;
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CS2CDR);
+
+	/* enable gpmi and bch clock gating */
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR4);
+	reg |= 0xFF003000;
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR4);
+
+	/* enable apbh clock gating */
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR0);
+	reg |= 0x0030;
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR0);
+
+}
+#endif
+
+#ifdef CONFIG_NET_MULTI
+int board_eth_init(bd_t *bis)
+{
+	int rc = -ENODEV;
+
+	return rc;
+}
+#endif
+
+#ifdef CONFIG_CMD_MMC
+
+/* On this board, only SD3 can support 1.8V signalling
+ * that is required for UHS-I mode of operation.
+ * Last element in struct is used to indicate 1.8V support.
+ */
+struct fsl_esdhc_cfg usdhc_cfg[4] = {
+	{USDHC1_BASE_ADDR, 1, 1, 1, 0},
+	{USDHC2_BASE_ADDR, 1, 1, 1, 0},
+	{USDHC3_BASE_ADDR, 1, 1, 1, 0},
+	{USDHC4_BASE_ADDR, 1, 1, 1, 0},
+};
+
+#ifdef CONFIG_DYNAMIC_MMC_DEVNO
+int get_mmc_env_devno(void)
+{
+	uint soc_sbmr = readl(SRC_BASE_ADDR + 0x4);
+
+	if (SD_BOOT == boot_dev || MMC_BOOT == boot_dev) {
+		/* BOOT_CFG2[3] and BOOT_CFG2[4] */
+		return (soc_sbmr & 0x00001800) >> 11;
+	} else
+		return -1;
+
+}
+#endif
+
+#if defined CONFIG_MX6Q
+iomux_v3_cfg_t usdhc1_pads[] = {
+	MX6Q_PAD_SD1_CLK__USDHC1_CLK,
+	MX6Q_PAD_SD1_CMD__USDHC1_CMD,
+	MX6Q_PAD_SD1_DAT0__USDHC1_DAT0,
+	MX6Q_PAD_SD1_DAT1__USDHC1_DAT1,
+	MX6Q_PAD_SD1_DAT2__USDHC1_DAT2,
+	MX6Q_PAD_SD1_DAT3__USDHC1_DAT3,
+};
+
+iomux_v3_cfg_t usdhc2_pads[] = {
+	MX6Q_PAD_SD2_CLK__USDHC2_CLK,
+	MX6Q_PAD_SD2_CMD__USDHC2_CMD,
+	MX6Q_PAD_SD2_DAT0__USDHC2_DAT0,
+	MX6Q_PAD_SD2_DAT1__USDHC2_DAT1,
+	MX6Q_PAD_SD2_DAT2__USDHC2_DAT2,
+	MX6Q_PAD_SD2_DAT3__USDHC2_DAT3,
+};
+
+iomux_v3_cfg_t usdhc3_pads[] = {
+	MX6Q_PAD_SD3_CLK__USDHC3_CLK,
+	MX6Q_PAD_SD3_CMD__USDHC3_CMD,
+	MX6Q_PAD_SD3_DAT0__USDHC3_DAT0,
+	MX6Q_PAD_SD3_DAT1__USDHC3_DAT1,
+	MX6Q_PAD_SD3_DAT2__USDHC3_DAT2,
+	MX6Q_PAD_SD3_DAT3__USDHC3_DAT3,
+	MX6Q_PAD_SD3_DAT4__USDHC3_DAT4,
+	MX6Q_PAD_SD3_DAT5__USDHC3_DAT5,
+	MX6Q_PAD_SD3_DAT6__USDHC3_DAT6,
+	MX6Q_PAD_SD3_DAT7__USDHC3_DAT7,
+};
+
+iomux_v3_cfg_t usdhc4_pads[] = {
+	MX6Q_PAD_SD4_CLK__USDHC4_CLK,
+	MX6Q_PAD_SD4_CMD__USDHC4_CMD,
+	MX6Q_PAD_SD4_DAT0__USDHC4_DAT0,
+	MX6Q_PAD_SD4_DAT1__USDHC4_DAT1,
+	MX6Q_PAD_SD4_DAT2__USDHC4_DAT2,
+	MX6Q_PAD_SD4_DAT3__USDHC4_DAT3,
+	MX6Q_PAD_SD4_DAT4__USDHC4_DAT4,
+	MX6Q_PAD_SD4_DAT5__USDHC4_DAT5,
+	MX6Q_PAD_SD4_DAT6__USDHC4_DAT6,
+	MX6Q_PAD_SD4_DAT7__USDHC4_DAT7,
+};
+#elif defined CONFIG_MX6DL
+iomux_v3_cfg_t usdhc1_pads[] = {
+	MX6DL_PAD_SD1_CLK__USDHC1_CLK,
+	MX6DL_PAD_SD1_CMD__USDHC1_CMD,
+	MX6DL_PAD_SD1_DAT0__USDHC1_DAT0,
+	MX6DL_PAD_SD1_DAT1__USDHC1_DAT1,
+	MX6DL_PAD_SD1_DAT2__USDHC1_DAT2,
+	MX6DL_PAD_SD1_DAT3__USDHC1_DAT3,
+};
+
+iomux_v3_cfg_t usdhc2_pads[] = {
+	MX6DL_PAD_SD2_CLK__USDHC2_CLK,
+	MX6DL_PAD_SD2_CMD__USDHC2_CMD,
+	MX6DL_PAD_SD2_DAT0__USDHC2_DAT0,
+	MX6DL_PAD_SD2_DAT1__USDHC2_DAT1,
+	MX6DL_PAD_SD2_DAT2__USDHC2_DAT2,
+	MX6DL_PAD_SD2_DAT3__USDHC2_DAT3,
+};
+
+iomux_v3_cfg_t usdhc3_pads[] = {
+	MX6DL_PAD_SD3_CLK__USDHC3_CLK,
+	MX6DL_PAD_SD3_CMD__USDHC3_CMD,
+	MX6DL_PAD_SD3_DAT0__USDHC3_DAT0,
+	MX6DL_PAD_SD3_DAT1__USDHC3_DAT1,
+	MX6DL_PAD_SD3_DAT2__USDHC3_DAT2,
+	MX6DL_PAD_SD3_DAT3__USDHC3_DAT3,
+	MX6DL_PAD_SD3_DAT4__USDHC3_DAT4,
+	MX6DL_PAD_SD3_DAT5__USDHC3_DAT5,
+	MX6DL_PAD_SD3_DAT6__USDHC3_DAT6,
+	MX6DL_PAD_SD3_DAT7__USDHC3_DAT7,
+};
+
+iomux_v3_cfg_t usdhc4_pads[] = {
+	MX6DL_PAD_SD4_CLK__USDHC4_CLK,
+	MX6DL_PAD_SD4_CMD__USDHC4_CMD,
+	MX6DL_PAD_SD4_DAT0__USDHC4_DAT0,
+	MX6DL_PAD_SD4_DAT1__USDHC4_DAT1,
+	MX6DL_PAD_SD4_DAT2__USDHC4_DAT2,
+	MX6DL_PAD_SD4_DAT3__USDHC4_DAT3,
+	MX6DL_PAD_SD4_DAT4__USDHC4_DAT4,
+	MX6DL_PAD_SD4_DAT5__USDHC4_DAT5,
+	MX6DL_PAD_SD4_DAT6__USDHC4_DAT6,
+	MX6DL_PAD_SD4_DAT7__USDHC4_DAT7,
+};
+#endif
+
+int usdhc_gpio_init(bd_t *bis)
+{
+	s32 status = 0;
+	u32 index = 0;
+
+	for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM;
+		++index) {
+		switch (index) {
+		case 0:
+			mxc_iomux_v3_setup_multiple_pads(usdhc1_pads,
+				sizeof(usdhc1_pads) /
+				sizeof(usdhc1_pads[0]));
+			break;
+		case 1:
+			mxc_iomux_v3_setup_multiple_pads(usdhc2_pads,
+				sizeof(usdhc2_pads) /
+				sizeof(usdhc2_pads[0]));
+			break;
+		case 2:
+			mxc_iomux_v3_setup_multiple_pads(usdhc3_pads,
+				sizeof(usdhc3_pads) /
+				sizeof(usdhc3_pads[0]));
+			break;
+		case 3:
+			mxc_iomux_v3_setup_multiple_pads(usdhc4_pads,
+				sizeof(usdhc4_pads) /
+				sizeof(usdhc4_pads[0]));
+			break;
+		default:
+			printf("Warning: you configured more USDHC controllers"
+				"(%d) then supported by the board (%d)\n",
+				index+1, CONFIG_SYS_FSL_USDHC_NUM);
+			return status;
+		}
+		status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+	}
+
+	return status;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	if (!usdhc_gpio_init(bis))
+		return 0;
+	else
+		return -1;
+}
+
+/* For DDR mode operation, provide target delay parameter for each SD port.
+ * Use cfg->esdhc_base to distinguish the SD port #. The delay for each port
+ * is dependent on signal layout for that particular port.  If the following
+ * CONFIG is not defined, then the default target delay value will be used.
+ */
+#ifdef CONFIG_GET_DDR_TARGET_DELAY
+u32 get_ddr_delay(struct fsl_esdhc_cfg *cfg)
+{
+	/* No delay required on SABRESD board SD ports */
+	return 0;
+}
+#endif
+
+#endif
+
+#ifdef CONFIG_LCD
+void lcd_enable(void)
+{
+	char *s;
+	int ret;
+	unsigned int reg;
+
+	s = getenv("lvds_num");
+	di = simple_strtol(s, NULL, 10);
+
+	/*
+	* hw_rev 2: IPUV3DEX
+	* hw_rev 3: IPUV3M
+	* hw_rev 4: IPUV3H
+	*/
+	g_ipu_hw_rev = IPUV3_HW_REV_IPUV3H;
+
+#if defined CONFIG_MX6Q
+	mxc_iomux_v3_setup_pad(MX6Q_PAD_SD1_DAT3__GPIO_1_21);
+#elif defined CONFIG_MX6DL
+	mxc_iomux_v3_setup_pad(MX6DL_PAD_SD1_DAT3__GPIO_1_21);
+#endif
+
+	reg = readl(GPIO1_BASE_ADDR + GPIO_GDIR);
+	reg |= (1 << 21);
+	writel(reg, GPIO1_BASE_ADDR + GPIO_GDIR);
+
+	reg = readl(GPIO1_BASE_ADDR + GPIO_DR);
+	reg |= (1 << 21);
+	writel(reg, GPIO1_BASE_ADDR + GPIO_DR);
+
+	/* Enable IPU clock */
+	if (di == 1) {
+		reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3);
+		reg |= 0xC033;
+		writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3);
+	} else {
+		reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3);
+		reg |= 0x300F;
+		writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3);
+	}
+
+	ret = ipuv3_fb_init(&lvds_xga, di, IPU_PIX_FMT_RGB666,
+			DI_PCLK_LDB, 65000000);
+	if (ret)
+		puts("LCD cannot be configured\n");
+
+	reg = readl(ANATOP_BASE_ADDR + 0xF0);
+	reg &= ~0x00003F00;
+	reg |= 0x00001300;
+	writel(reg, ANATOP_BASE_ADDR + 0xF4);
+
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CS2CDR);
+	reg &= ~0x00007E00;
+	reg |= 0x00003600;
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CS2CDR);
+
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CSCMR2);
+	reg |= 0x00000C00;
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CSCMR2);
+
+	reg = 0x0002A953;
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CHSCCDR);
+
+	if (di == 1)
+		writel(0x40C, IOMUXC_BASE_ADDR + 0x8);
+	else
+		writel(0x201, IOMUXC_BASE_ADDR + 0x8);
+}
+#endif
+
+#ifdef CONFIG_VIDEO_MX5
+void panel_info_init(void)
+{
+	panel_info.vl_bpix = LCD_BPP;
+	panel_info.vl_col = lvds_xga.xres;
+	panel_info.vl_row = lvds_xga.yres;
+	panel_info.cmap = colormap;
+}
+#endif
+
+#ifdef CONFIG_SPLASH_SCREEN
+void setup_splash_image(void)
+{
+	char *s;
+	ulong addr;
+
+	s = getenv("splashimage");
+
+	if (s != NULL) {
+		addr = simple_strtoul(s, NULL, 16);
+
+#if defined(CONFIG_ARCH_MMU)
+		addr = ioremap_nocache(iomem_to_phys(addr),
+				fsl_bmp_600x400_size);
+#endif
+		memcpy((char *)addr, (char *)fsl_bmp_600x400,
+				fsl_bmp_600x400_size);
+	}
+}
+#endif
+
+int board_init(void)
+{
+/* need set Power Supply Glitch to 0x41736166
+*and need clear Power supply Glitch Detect bit
+* when POR or reboot or power on Otherwise system
+*could not be power off anymore*/
+	u32 reg;
+	writel(0x41736166, SNVS_BASE_ADDR + 0x64);/*set LPPGDR*/
+	udelay(10);
+	reg = readl(SNVS_BASE_ADDR + 0x4c);
+	reg |= (1 << 3);
+	writel(reg, SNVS_BASE_ADDR + 0x4c);/*clear LPSR*/
+
+	mxc_iomux_v3_init((void *)IOMUXC_BASE_ADDR);
+#if defined CONFIG_MX6Q
+	mxc_iomux_v3_setup_pad(MX6Q_PAD_NANDF_D6__GPIO_2_6);
+#elif defined CONFIG_MX6DL
+	mxc_iomux_v3_setup_pad(MX6DL_PAD_NANDF_D6__GPIO_2_6);
+#endif
+	gpio_direction_output(HDMIDONGLE_CHG_SYS_ON, 1);
+	setup_boot_device();
+	fsl_set_system_rev();
+
+	/* board id for linux */
+	gd->bd->bi_arch_number = MACH_TYPE_MX6Q_HDMIDONGLE;
+
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	setup_uart();
+
+#ifdef CONFIG_DWC_AHSATA
+	setup_sata();
+#endif
+
+#ifdef CONFIG_VIDEO_MX5
+	/* Enable lvds power */
+	setup_lvds_poweron();
+
+	panel_info_init();
+
+	gd->fb_base = CONFIG_FB_BASE;
+#ifdef CONFIG_ARCH_MMU
+	gd->fb_base = ioremap_nocache(iomem_to_phys(gd->fb_base), 0);
+#endif
+#endif
+
+#ifdef CONFIG_NAND_GPMI
+	setup_gpmi_nand();
+#endif
+	return 0;
+}
+
+
+#ifdef CONFIG_ANDROID_RECOVERY
+int check_recovery_cmd_file(void)
+{
+	int button_pressed = 0;
+	int recovery_mode = 0;
+
+	recovery_mode = check_and_clean_recovery_flag();
+
+	/* Check Recovery Combo Button press or not. */
+	mxc_iomux_v3_setup_pad(MX6X_IOMUX(PAD_ENET_RXD0__GPIO_1_27));
+
+	gpio_direction_input(GPIO_REVB_POWER_KEY);
+
+	if (gpio_get_value(GPIO_REVB_POWER_KEY) == 0) { /* VOL_DN key is low assert */
+		button_pressed = 1;
+		printf("Recovery key pressed\n");
+	}
+
+	return recovery_mode || button_pressed;
+}
+#endif
+
+int board_late_init(void)
+{
+	#ifdef CONFIG_I2C_MXC
+	setup_i2c(CONFIG_SYS_I2C_PORT);
+	i2c_bus_recovery();
+	setup_pmic_voltages();
+	#endif
+	return 0;
+}
+
+#ifdef CONFIG_MXC_FEC
+static int phy_read(char *devname, unsigned char addr, unsigned char reg,
+		    unsigned short *pdata)
+{
+	int ret = miiphy_read(devname, addr, reg, pdata);
+	if (ret)
+		printf("Error reading from %s PHY addr=%02x reg=%02x\n",
+		       devname, addr, reg);
+	return ret;
+}
+
+static int phy_write(char *devname, unsigned char addr, unsigned char reg,
+		     unsigned short value)
+{
+	int ret = miiphy_write(devname, addr, reg, value);
+	if (ret)
+		printf("Error writing to %s PHY addr=%02x reg=%02x\n", devname,
+		       addr, reg);
+	return ret;
+}
+
+int mx6_rgmii_rework(char *devname, int phy_addr)
+{
+	unsigned short val;
+
+	/* To enable AR8031 ouput a 125MHz clk from CLK_25M */
+	phy_write(devname, phy_addr, 0xd, 0x7);
+	phy_write(devname, phy_addr, 0xe, 0x8016);
+	phy_write(devname, phy_addr, 0xd, 0x4007);
+	phy_read(devname, phy_addr, 0xe, &val);
+
+	val &= 0xffe3;
+	val |= 0x18;
+	phy_write(devname, phy_addr, 0xe, val);
+
+	/* introduce tx clock delay */
+	phy_write(devname, phy_addr, 0x1d, 0x5);
+	phy_read(devname, phy_addr, 0x1e, &val);
+	val |= 0x0100;
+	phy_write(devname, phy_addr, 0x1e, val);
+
+	return 0;
+}
+
+#if defined CONFIG_MX6Q
+iomux_v3_cfg_t enet_pads[] = {
+	MX6Q_PAD_ENET_MDIO__ENET_MDIO,
+	MX6Q_PAD_ENET_MDC__ENET_MDC,
+	MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC,
+	MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0,
+	MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1,
+	MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2,
+	MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3,
+	MX6Q_PAD_RGMII_TX_CTL__ENET_RGMII_TX_CTL,
+	MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK,
+	MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC,
+	MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0,
+	MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1,
+	MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2,
+	MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3,
+	MX6Q_PAD_RGMII_RX_CTL__ENET_RGMII_RX_CTL,
+	MX6Q_PAD_GPIO_0__CCM_CLKO,
+	MX6Q_PAD_GPIO_3__CCM_CLKO2,
+};
+#elif defined CONFIG_MX6DL
+iomux_v3_cfg_t enet_pads[] = {
+	MX6DL_PAD_ENET_MDIO__ENET_MDIO,
+	MX6DL_PAD_ENET_MDC__ENET_MDC,
+	MX6DL_PAD_RGMII_TXC__ENET_RGMII_TXC,
+	MX6DL_PAD_RGMII_TD0__ENET_RGMII_TD0,
+	MX6DL_PAD_RGMII_TD1__ENET_RGMII_TD1,
+	MX6DL_PAD_RGMII_TD2__ENET_RGMII_TD2,
+	MX6DL_PAD_RGMII_TD3__ENET_RGMII_TD3,
+	MX6DL_PAD_RGMII_TX_CTL__ENET_RGMII_TX_CTL,
+	MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK,
+	MX6DL_PAD_RGMII_RXC__ENET_RGMII_RXC,
+	MX6DL_PAD_RGMII_RD0__ENET_RGMII_RD0,
+	MX6DL_PAD_RGMII_RD1__ENET_RGMII_RD1,
+	MX6DL_PAD_RGMII_RD2__ENET_RGMII_RD2,
+	MX6DL_PAD_RGMII_RD3__ENET_RGMII_RD3,
+	MX6DL_PAD_RGMII_RX_CTL__ENET_RGMII_RX_CTL,
+	MX6DL_PAD_GPIO_0__CCM_CLKO,
+};
+#endif
+
+void enet_board_init(void)
+{
+	unsigned int reg;
+#if defined CONFIG_MX6Q
+	iomux_v3_cfg_t enet_reset =
+			(_MX6Q_PAD_ENET_CRS_DV__GPIO_1_25 &
+			~MUX_PAD_CTRL_MASK)           |
+			 MUX_PAD_CTRL(0x88);
+#elif defined CONFIG_MX6DL
+	iomux_v3_cfg_t enet_reset =
+			(MX6DL_PAD_ENET_CRS_DV__GPIO_1_25 &
+			~MUX_PAD_CTRL_MASK)           |
+			 MUX_PAD_CTRL(0x88);
+#endif
+
+	mxc_iomux_v3_setup_multiple_pads(enet_pads,
+			ARRAY_SIZE(enet_pads));
+	mxc_iomux_v3_setup_pad(enet_reset);
+
+	/* phy reset: gpio1-25 */
+	reg = readl(GPIO1_BASE_ADDR + 0x0);
+	reg &= ~0x2000000;
+	writel(reg, GPIO1_BASE_ADDR + 0x0);
+
+	reg = readl(GPIO1_BASE_ADDR + 0x4);
+	reg |= 0x2000000;
+	writel(reg, GPIO1_BASE_ADDR + 0x4);
+
+	udelay(500);
+
+	reg = readl(GPIO1_BASE_ADDR + 0x0);
+	reg |= 0x2000000;
+	writel(reg, GPIO1_BASE_ADDR + 0x0);
+}
+#endif
+
+int checkboard(void)
+{
+	printf("Board: %s-HDMIDONGLE: %s Board: 0x%x [",
+	mx6_chip_name(),
+	mx6_board_rev_name(),
+	fsl_system_rev);
+
+	switch (__REG(SRC_BASE_ADDR + 0x8)) {
+	case 0x0001:
+		printf("POR");
+		break;
+	case 0x0009:
+		printf("RST");
+		break;
+	case 0x0010:
+	case 0x0011:
+		printf("WDOG");
+		break;
+	default:
+		printf("unknown");
+	}
+	printf(" ]\n");
+
+	printf("Boot Device: ");
+	switch (get_boot_device()) {
+	case WEIM_NOR_BOOT:
+		printf("NOR\n");
+		break;
+	case ONE_NAND_BOOT:
+		printf("ONE NAND\n");
+		break;
+	case PATA_BOOT:
+		printf("PATA\n");
+		break;
+	case SATA_BOOT:
+		printf("SATA\n");
+		break;
+	case I2C_BOOT:
+		printf("I2C\n");
+		break;
+	case SPI_NOR_BOOT:
+		printf("SPI NOR\n");
+		break;
+	case SD_BOOT:
+		printf("SD\n");
+		break;
+	case MMC_BOOT:
+		printf("MMC\n");
+		break;
+	case NAND_BOOT:
+		printf("NAND\n");
+		break;
+	case UNKNOWN_BOOT:
+	default:
+		printf("UNKNOWN\n");
+		break;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_IMX_UDC
+
+void udc_pins_setting(void)
+{
+	mxc_iomux_v3_setup_pad(MX6X_IOMUX(PAD_GPIO_1__USBOTG_ID));
+	mxc_iomux_v3_setup_pad(MX6X_IOMUX(PAD_KEY_ROW4__GPIO_4_15));
+	if (mx6_board_is_reva())
+		mxc_iomux_v3_setup_pad(MX6X_IOMUX(PAD_KEY_COL4__GPIO_4_14));
+
+	/* set USB_OTG_PWR to 0 */
+	gpio_direction_output(USB_OTG_PWR, 0);
+
+	/* set USB_H1_POWER to 1 */
+	if (mx6_board_is_reva())
+		gpio_direction_output(USB_H1_POWER, 1);
+
+	mxc_iomux_set_gpr_register(1, 13, 1, 0);
+
+}
+#endif
diff --git a/board/freescale/mx6q_hdmidongle/u-boot.lds b/board/freescale/mx6q_hdmidongle/u-boot.lds
new file mode 100644
index 0000000..fe2bda1
--- /dev/null
+++ b/board/freescale/mx6q_hdmidongle/u-boot.lds
@@ -0,0 +1,74 @@
+/*
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text	   :
+	{
+	  /* WARNING - the following is hand-optimized to fit within	*/
+	  /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+	  board/freescale/mx6q_hdmidongle/flash_header.o	(.text.flasheader)
+	  cpu/arm_cortexa8/start.o
+	  board/freescale/mx6q_hdmidongle/libmx6q_hdmidongle.a	(.text)
+	  lib_arm/libarm.a		(.text)
+	  net/libnet.a			(.text)
+	  drivers/mtd/libmtd.a		(.text)
+	  drivers/mmc/libmmc.a		(.text)
+
+	  . = DEFINED(env_offset) ? env_offset : .;
+	  common/env_embedded.o(.text)
+
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	. = .;
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	_end_of_copy = .; /* end_of ROM copy code here */
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}