summaryrefslogtreecommitdiff
path: root/board/freescale/mx53ard/mx53ard.c
diff options
context:
space:
mode:
authorBenoît Thébaudeau <benoit.thebaudeau@advansee.com>2013-04-11 09:35:39 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2013-04-12 07:55:04 +0200
commit68fbc0e68604a3e58c6980e3d934e9741e561174 (patch)
tree3c98ab6b0a94950a4282b1526052c713aa11b749 /board/freescale/mx53ard/mx53ard.c
parente78b14080112af75cb287e5a6eac28f728d036ed (diff)
downloadu-boot-imx-68fbc0e68604a3e58c6980e3d934e9741e561174.zip
u-boot-imx-68fbc0e68604a3e58c6980e3d934e9741e561174.tar.gz
u-boot-imx-68fbc0e68604a3e58c6980e3d934e9741e561174.tar.bz2
imx: mx53ard: Add support for NAND Flash
Add support for the Samsung K9LAG08U0M NAND Flash (2-GiB MLC NAND Flash, 2-kiB pages, 256-kiB blocks, 30-ns R/W cycles, 1 CS) on mx53ard. eNFC_CLK_ROOT is set up with a cycle time of 37.5 ns (400 MHz / 3 / 5) for this board, which satisfies the 30-ns NF R/W cycle requirement. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Diffstat (limited to 'board/freescale/mx53ard/mx53ard.c')
-rw-r--r--board/freescale/mx53ard/mx53ard.c66
1 files changed, 66 insertions, 0 deletions
diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c
index 2fc8570..8d433a3 100644
--- a/board/freescale/mx53ard/mx53ard.c
+++ b/board/freescale/mx53ard/mx53ard.c
@@ -58,6 +58,71 @@ void dram_init_banksize(void)
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
}
+#ifdef CONFIG_NAND_MXC
+static void setup_iomux_nand(void)
+{
+ u32 i, reg;
+ #define M4IF_GENP_WEIM_MM_MASK 0x00000001
+ #define WEIM_GCR2_MUX16_BYP_GRANT_MASK 0x00001000
+
+ reg = __raw_readl(M4IF_BASE_ADDR + 0xc);
+ reg &= ~M4IF_GENP_WEIM_MM_MASK;
+ __raw_writel(reg, M4IF_BASE_ADDR + 0xc);
+ for (i = 0x4; i < 0x94; i += 0x18) {
+ reg = __raw_readl(WEIM_BASE_ADDR + i);
+ reg &= ~WEIM_GCR2_MUX16_BYP_GRANT_MASK;
+ __raw_writel(reg, WEIM_BASE_ADDR + i);
+ }
+
+ mxc_request_iomux(MX53_PIN_NANDF_CS0, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_NANDF_CS0, PAD_CTL_DRV_HIGH);
+ mxc_request_iomux(MX53_PIN_NANDF_CS1, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_NANDF_CS1, PAD_CTL_DRV_HIGH);
+ mxc_request_iomux(MX53_PIN_NANDF_RB0, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_NANDF_RB0, PAD_CTL_PKE_ENABLE |
+ PAD_CTL_PUE_PULL | PAD_CTL_100K_PU);
+ mxc_request_iomux(MX53_PIN_NANDF_CLE, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_NANDF_CLE, PAD_CTL_DRV_HIGH);
+ mxc_request_iomux(MX53_PIN_NANDF_ALE, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_NANDF_ALE, PAD_CTL_DRV_HIGH);
+ mxc_request_iomux(MX53_PIN_NANDF_WP_B, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_NANDF_WP_B, PAD_CTL_PKE_ENABLE |
+ PAD_CTL_PUE_PULL | PAD_CTL_100K_PU);
+ mxc_request_iomux(MX53_PIN_NANDF_RE_B, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_NANDF_RE_B, PAD_CTL_DRV_HIGH);
+ mxc_request_iomux(MX53_PIN_NANDF_WE_B, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_NANDF_WE_B, PAD_CTL_DRV_HIGH);
+ mxc_request_iomux(MX53_PIN_EIM_DA0, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_EIM_DA0, PAD_CTL_PKE_ENABLE |
+ PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
+ mxc_request_iomux(MX53_PIN_EIM_DA1, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_EIM_DA1, PAD_CTL_PKE_ENABLE |
+ PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
+ mxc_request_iomux(MX53_PIN_EIM_DA2, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_EIM_DA2, PAD_CTL_PKE_ENABLE |
+ PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
+ mxc_request_iomux(MX53_PIN_EIM_DA3, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_EIM_DA3, PAD_CTL_PKE_ENABLE |
+ PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
+ mxc_request_iomux(MX53_PIN_EIM_DA4, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_EIM_DA4, PAD_CTL_PKE_ENABLE |
+ PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
+ mxc_request_iomux(MX53_PIN_EIM_DA5, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_EIM_DA5, PAD_CTL_PKE_ENABLE |
+ PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
+ mxc_request_iomux(MX53_PIN_EIM_DA6, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_EIM_DA6, PAD_CTL_PKE_ENABLE |
+ PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
+ mxc_request_iomux(MX53_PIN_EIM_DA7, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_EIM_DA7, PAD_CTL_PKE_ENABLE |
+ PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH);
+}
+#else
+static void setup_iomux_nand(void)
+{
+}
+#endif
+
static void setup_iomux_uart(void)
{
/* UART1 RXD */
@@ -277,6 +342,7 @@ static void weim_cs1_settings(void)
int board_early_init_f(void)
{
+ setup_iomux_nand();
setup_iomux_uart();
return 0;
}