diff options
| author | Lily Zhang <r58066@freescale.com> | 2009-12-27 17:21:58 +0800 |
|---|---|---|
| committer | Lily Zhang <r58066@freescale.com> | 2009-12-27 17:34:10 +0800 |
| commit | a7fc31a95a55983ddd0015d3778e0fe1c2d220dc (patch) | |
| tree | 825424608852d43b29df2dcf3dbad4e01159df76 /board/freescale/mx51_bbg | |
| parent | 5c5128b60555aa6a793eac9e507d5c984bd5f3ec (diff) | |
| download | u-boot-imx-a7fc31a95a55983ddd0015d3778e0fe1c2d220dc.zip u-boot-imx-a7fc31a95a55983ddd0015d3778e0fe1c2d220dc.tar.gz u-boot-imx-a7fc31a95a55983ddd0015d3778e0fe1c2d220dc.tar.bz2 | |
ENGR00118739 Correct the board version of MX51 EVK
The SD card in MMC Slot2 can not be detected. This is because
the board version of MX51 EVK doesn't keep synchronization
with kernel. So the card detect PIN is not configured well.
Here Bit 11-Bit 8 in system_rev indicates the board version.
The fix is to set Bit 11 -Bit8 as 1 for MX51 EVK board.
Signed-off-by: Lily Zhang <r58066@freescale.com>
Diffstat (limited to 'board/freescale/mx51_bbg')
| -rw-r--r-- | board/freescale/mx51_bbg/mx51_bbg.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/board/freescale/mx51_bbg/mx51_bbg.c b/board/freescale/mx51_bbg/mx51_bbg.c index 4279ac6..60fc704 100644 --- a/board/freescale/mx51_bbg/mx51_bbg.c +++ b/board/freescale/mx51_bbg/mx51_bbg.c @@ -121,11 +121,7 @@ static inline void setup_soc_rev(void) system_rev = 0x51000 | CHIP_REV_1_1; break; case 0x10: - if ((__REG(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0) { - system_rev = 0x51000 | CHIP_REV_2_5; - } else { - system_rev = 0x51000 | CHIP_REV_2_0; - } + system_rev = 0x51000 | CHIP_REV_2_0; break; case 0x20: system_rev = 0x51000 | CHIP_REV_3_0; @@ -135,9 +131,11 @@ static inline void setup_soc_rev(void) } } -static inline void set_board_rev(int rev) +static inline void set_board_rev() { - system_rev |= (rev & 0xF) << 8; + if ((__REG(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0) + system_rev |= BOARD_REV_2_0 << BOARD_VER_OFFSET; + } inline int is_soc_rev(int rev) @@ -664,6 +662,7 @@ int board_init(void) { setup_boot_device(); setup_soc_rev(); + set_board_rev(); gd->bd->bi_arch_number = MACH_TYPE_MX51_BABBAGE; /* board id for linux */ /* address of boot parameters */ @@ -886,13 +885,14 @@ int checkboard(void) { printf("Board: MX51 BABBAGE "); - if (system_rev & CHIP_REV_3_0) { + if (is_soc_rev(CHIP_REV_3_0) == 0) { printf("3.0 ["); - } else if (system_rev & CHIP_REV_2_5) { + } else if ((is_soc_rev(CHIP_REV_2_0) == 0) + && (system_rev & (BOARD_REV_2_0 << BOARD_VER_OFFSET))) { printf("2.5 ["); - } else if (system_rev & CHIP_REV_2_0) { + } else if (is_soc_rev(CHIP_REV_2_0) == 0) { printf("2.0 ["); - } else if (system_rev & CHIP_REV_1_1) { + } else if (is_soc_rev(CHIP_REV_1_1) == 0) { printf("1.1 ["); } else { printf("1.0 ["); |