ppc4xx: remove CMS700 board

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>

5 files changed, 0 insertions, 311 deletions

diff --git a/board/esd/cms700/Kconfig b/board/esd/cms700/Kconfig
deleted file mode 100644
index da11bc0..0000000
--- a/board/esd/cms700/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CMS700
-
-config SYS_BOARD
-	default "cms700"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "CMS700"
-
-endif
diff --git a/board/esd/cms700/MAINTAINERS b/board/esd/cms700/MAINTAINERS
deleted file mode 100644
index 0191c8b..0000000
--- a/board/esd/cms700/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CMS700 BOARD
-M:	Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-S:	Maintained
-F:	board/esd/cms700/
-F:	include/configs/CMS700.h
-F:	configs/CMS700_defconfig
diff --git a/board/esd/cms700/Makefile b/board/esd/cms700/Makefile
deleted file mode 100644
index 2bf5006..0000000
--- a/board/esd/cms700/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# Objects for Xilinx JTAG programming (CPLD)
-CPLD    = ../common/xilinx_jtag/lenval.o \
-	  ../common/xilinx_jtag/micro.o \
-	  ../common/xilinx_jtag/ports.o
-
-obj-y	= cms700.o flash.o \
-	../common/misc.o \
-	$(CPLD) \
-	../common/esd405ep_nand.o \
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
deleted file mode 100644
index 40d7621..0000000
--- a/board/esd/cms700/cms700.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * (C) Copyright 2005-2007
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-#include <malloc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void lxt971_no_sleep(void);
-
-int board_early_init_f (void)
-{
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
-	 */
-	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);       /* disable all ints */
-	mtdcr(UIC0CR, 0x00000000);       /* set all to be non-critical*/
-	mtdcr(UIC0PR, 0xFFFFFF80);       /* set int polarities */
-	mtdcr(UIC0TR, 0x10000000);       /* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001);      /* set vect base=0,INT0 highest priority*/
-	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
-
-	/*
-	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
-	 */
-	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
-
-	/*
-	 * Reset CPLD via GPIO12 (CS3) pin
-	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_PLD_RESET);
-	udelay(1000); /* wait 1ms */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_PLD_RESET);
-	udelay(1000); /* wait 1ms */
-
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/*
-	 * Setup and enable EEPROM write protection
-	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
-
-	return (0);
-}
-
-
-/*
- * Check Board Identity:
- */
-#define LED_REG (CONFIG_SYS_PLD_BASE + 0x1000)
-int checkboard (void)
-{
-	char str[64];
-	int flashcnt;
-	int delay;
-
-	puts ("Board: ");
-
-	if (getenv_f("serial#", str, sizeof(str))  == -1) {
-		puts ("### No HW ID - assuming CMS700");
-	} else {
-		puts(str);
-	}
-
-	printf(" (PLD-Version=%02d)\n",
-	       in_8((void *)(CONFIG_SYS_PLD_BASE + 0x1001)));
-
-	/*
-	 * Flash LEDs
-	 */
-	for (flashcnt = 0; flashcnt < 3; flashcnt++) {
-		out_8((void *)LED_REG, 0x00); /* LEDs off */
-		for (delay = 0; delay < 100; delay++)
-			udelay(1000);
-		out_8((void *)LED_REG, 0x0f); /* LEDs on */
-		for (delay = 0; delay < 50; delay++)
-			udelay(1000);
-	}
-	out_8((void *)LED_REG, 0x70);
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_SYS_EEPROM_WREN)
-/* Input: <dev_addr>  I2C address of EEPROM device to enable.
- *         <state>     -1: deliver current state
- *	               0: disable write
- *		       1: enable write
- *  Returns:           -1: wrong device address
- *                      0: dis-/en- able done
- *		     0/1: current state if <state> was -1.
- */
-int eeprom_write_enable (unsigned dev_addr, int state)
-{
-	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
-		return -1;
-	} else {
-		switch (state) {
-		case 1:
-			/* Enable write access, clear bit GPIO_SINT2. */
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
-			state = 0;
-			break;
-		case 0:
-			/* Disable write access, set bit GPIO_SINT2. */
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
-			state = 0;
-			break;
-		default:
-			/* Read current status back. */
-			state = (0 == (in_be32((void *)GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
-			break;
-		}
-	}
-	return state;
-}
-
-int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int query = argc == 1;
-	int state = 0;
-
-	if (query) {
-		/* Query write access state. */
-		state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
-		if (state < 0) {
-			puts ("Query of write access state failed.\n");
-		} else {
-			printf ("Write access for device 0x%0x is %sabled.\n",
-				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
-			state = 0;
-		}
-	} else {
-		if ('0' == argv[1][0]) {
-			/* Disable write access. */
-			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
-		} else {
-			/* Enable write access. */
-			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
-		}
-		if (state < 0) {
-			puts ("Setup of write access state failed.\n");
-		}
-	}
-
-	return state;
-}
-
-U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
-	"Enable / disable / query EEPROM write access",
-	""
-);
-#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
-
-/* ------------------------------------------------------------------------- */
-
-void reset_phy(void)
-{
-#ifdef CONFIG_LXT971_NO_SLEEP
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-#endif
-}
diff --git a/board/esd/cms700/flash.c b/board/esd/cms700/flash.c
deleted file mode 100644
index 23e8164..0000000
--- a/board/esd/cms700/flash.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-/*
- * include common flash code (for esd boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0;
-	int i;
-	uint pbcr;
-	unsigned long base_b0;
-	int size_val = 0;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
-	}
-
-	/* Setup offsets */
-	flash_get_offsets (-size_b0, &flash_info[0]);
-
-	/* Re-do sizing to get full correct info */
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	pbcr = mfdcr(EBC0_CFGDATA);
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	base_b0 = -size_b0;
-	switch (size_b0) {
-	case 1 << 20:
-		size_val = 0;
-		break;
-	case 2 << 20:
-		size_val = 1;
-		break;
-	case 4 << 20:
-		size_val = 2;
-		break;
-	case 8 << 20:
-		size_val = 3;
-		break;
-	case 16 << 20:
-		size_val = 4;
-		break;
-	}
-	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(EBC0_CFGDATA, pbcr);
-
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CONFIG_SYS_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	flash_info[0].size = size_b0;
-
-	return (size_b0);
-}