From 2404124c4777aa917ad95d25e78ca3ab03636132 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Mon, 12 Jan 2015 22:47:17 +0100 Subject: ppc4xx: remove CMS700 board Signed-off-by: Matthias Fuchs --- board/esd/cms700/Kconfig | 12 --- board/esd/cms700/MAINTAINERS | 6 -- board/esd/cms700/Makefile | 16 ---- board/esd/cms700/cms700.c | 192 ------------------------------------------- board/esd/cms700/flash.c | 85 ------------------- 5 files changed, 311 deletions(-) delete mode 100644 board/esd/cms700/Kconfig delete mode 100644 board/esd/cms700/MAINTAINERS delete mode 100644 board/esd/cms700/Makefile delete mode 100644 board/esd/cms700/cms700.c delete mode 100644 board/esd/cms700/flash.c (limited to 'board/esd') diff --git a/board/esd/cms700/Kconfig b/board/esd/cms700/Kconfig deleted file mode 100644 index da11bc0..0000000 --- a/board/esd/cms700/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_CMS700 - -config SYS_BOARD - default "cms700" - -config SYS_VENDOR - default "esd" - -config SYS_CONFIG_NAME - default "CMS700" - -endif diff --git a/board/esd/cms700/MAINTAINERS b/board/esd/cms700/MAINTAINERS deleted file mode 100644 index 0191c8b..0000000 --- a/board/esd/cms700/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -CMS700 BOARD -M: Matthias Fuchs -S: Maintained -F: board/esd/cms700/ -F: include/configs/CMS700.h -F: configs/CMS700_defconfig diff --git a/board/esd/cms700/Makefile b/board/esd/cms700/Makefile deleted file mode 100644 index 2bf5006..0000000 --- a/board/esd/cms700/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# Objects for Xilinx JTAG programming (CPLD) -CPLD = ../common/xilinx_jtag/lenval.o \ - ../common/xilinx_jtag/micro.o \ - ../common/xilinx_jtag/ports.o - -obj-y = cms700.o flash.o \ - ../common/misc.o \ - $(CPLD) \ - ../common/esd405ep_nand.o \ diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c deleted file mode 100644 index 40d7621..0000000 --- a/board/esd/cms700/cms700.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * (C) Copyright 2005-2007 - * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -extern void lxt971_no_sleep(void); - -int board_early_init_f (void) -{ - /* - * IRQ 0-15 405GP internally generated; active high; level sensitive - * IRQ 16 405GP internally generated; active low; level sensitive - * IRQ 17-24 RESERVED - * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive - * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive - * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive - * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive - * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive - * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive - * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive - */ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr(UIC0ER, 0x00000000); /* disable all ints */ - mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ - mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ - mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ - mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - - /* - * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us - */ - mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ - - /* - * Reset CPLD via GPIO12 (CS3) pin - */ - out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_PLD_RESET); - udelay(1000); /* wait 1ms */ - out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_PLD_RESET); - udelay(1000); /* wait 1ms */ - - return 0; -} - -int misc_init_r (void) -{ - /* adjust flash start and offset */ - gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; - gd->bd->bi_flashoffset = 0; - - /* - * Setup and enable EEPROM write protection - */ - out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP); - - return (0); -} - - -/* - * Check Board Identity: - */ -#define LED_REG (CONFIG_SYS_PLD_BASE + 0x1000) -int checkboard (void) -{ - char str[64]; - int flashcnt; - int delay; - - puts ("Board: "); - - if (getenv_f("serial#", str, sizeof(str)) == -1) { - puts ("### No HW ID - assuming CMS700"); - } else { - puts(str); - } - - printf(" (PLD-Version=%02d)\n", - in_8((void *)(CONFIG_SYS_PLD_BASE + 0x1001))); - - /* - * Flash LEDs - */ - for (flashcnt = 0; flashcnt < 3; flashcnt++) { - out_8((void *)LED_REG, 0x00); /* LEDs off */ - for (delay = 0; delay < 100; delay++) - udelay(1000); - out_8((void *)LED_REG, 0x0f); /* LEDs on */ - for (delay = 0; delay < 50; delay++) - udelay(1000); - } - out_8((void *)LED_REG, 0x70); - - return 0; -} - -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_SYS_EEPROM_WREN) -/* Input: I2C address of EEPROM device to enable. - * -1: deliver current state - * 0: disable write - * 1: enable write - * Returns: -1: wrong device address - * 0: dis-/en- able done - * 0/1: current state if was -1. - */ -int eeprom_write_enable (unsigned dev_addr, int state) -{ - if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) { - return -1; - } else { - switch (state) { - case 1: - /* Enable write access, clear bit GPIO_SINT2. */ - out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP); - state = 0; - break; - case 0: - /* Disable write access, set bit GPIO_SINT2. */ - out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP); - state = 0; - break; - default: - /* Read current status back. */ - state = (0 == (in_be32((void *)GPIO0_OR) & CONFIG_SYS_EEPROM_WP)); - break; - } - } - return state; -} - -int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int query = argc == 1; - int state = 0; - - if (query) { - /* Query write access state. */ - state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1); - if (state < 0) { - puts ("Query of write access state failed.\n"); - } else { - printf ("Write access for device 0x%0x is %sabled.\n", - CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis"); - state = 0; - } - } else { - if ('0' == argv[1][0]) { - /* Disable write access. */ - state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0); - } else { - /* Enable write access. */ - state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1); - } - if (state < 0) { - puts ("Setup of write access state failed.\n"); - } - } - - return state; -} - -U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - "" -); -#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ - -/* ------------------------------------------------------------------------- */ - -void reset_phy(void) -{ -#ifdef CONFIG_LXT971_NO_SLEEP - - /* - * Disable sleep mode in LXT971 - */ - lxt971_no_sleep(); -#endif -} diff --git a/board/esd/cms700/flash.c b/board/esd/cms700/flash.c deleted file mode 100644 index 23e8164..0000000 --- a/board/esd/cms700/flash.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -/* - * include common flash code (for esd boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long * addr, flash_info_t * info); -static void flash_get_offsets (ulong base, flash_info_t * info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long size_b0; - int i; - uint pbcr; - unsigned long base_b0; - int size_val = 0; - - /* Init: no FLASHes known */ - for (i=0; i