diff options
| author | Jagan Teki <jagan@amarulasolutions.com> | 2016-12-13 17:56:52 +0100 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2016-12-16 17:16:10 +0100 |
| commit | a5b9f8c8f07f2a901354a77c6131cb0429881bf8 (patch) | |
| tree | 80cbf0089bb80e3c6193a6b671727b5ce0fc96f6 /board/engicam/geam6ul/README | |
| parent | b8ad70f70655d4a53c4014e768a25194c8a4b219 (diff) | |
| download | u-boot-imx-a5b9f8c8f07f2a901354a77c6131cb0429881bf8.zip u-boot-imx-a5b9f8c8f07f2a901354a77c6131cb0429881bf8.tar.gz u-boot-imx-a5b9f8c8f07f2a901354a77c6131cb0429881bf8.tar.bz2 | |
arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support
Boot Log:
--------
U-Boot SPL 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30)
Trying to boot from MMC1
U-Boot 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30 +0530)
CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 43C
Reset cause: POR
Model: Engicam GEAM6UL
DRAM: 128 MiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot: 0
geam6ul>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Diffstat (limited to 'board/engicam/geam6ul/README')
| -rw-r--r-- | board/engicam/geam6ul/README | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/board/engicam/geam6ul/README b/board/engicam/geam6ul/README new file mode 100644 index 0000000..0df6ae4 --- /dev/null +++ b/board/engicam/geam6ul/README @@ -0,0 +1,28 @@ +How to use U-Boot on Engicam GEAM6UL Starter Kit: +------------------------------------------------- + +- Configure U-Boot for Engicam GEAM6UL: + +$ make mrproper +$ make imx6ul_geam_mmc_defconfig +$ make + +This will generate the SPL image called SPL and the u-boot-dtb.img. + +- Flash the SPL image into the micro SD card: + +sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync + +- Flash the u-boot-dtb.img image into the micro SD card: + +sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync + +- Jumper settings: + +MMC Boot: JM3 Closed + +- Connect the Serial cable between the Starter Kit and the PC for the console. +(J28 is the Linux Serial console connector) + +- Insert the micro SD card in the board, power it up and U-Boot messages should +come up. |